Z2 doesn't start and loop SE splash screen

Similar Questions

• Two quick questions (hopefully) - right way to dynamically change the CSS class and put of Splash screen implemented

  Couple of quick questions have left me speechless!

  So, it seems obvious that many JavaFX applications want to dynamically change the CSS styles.  Is the best way to do it through la.getStyleClass () .add ("classname") < node >?  The underlying data structure is a list of observable.  So let's say we have 5 styles that simply to change the fill color of a circle of 5 different colors, respectively.  So if I have a condition in which I want to dynamically apply 1 of these 5 styles, as I do now it's by setting all 5 styles as a string in a list by using a static initializer, then I call < node > .getStyleClass () .removeAll (list), then getStyleClass () .add ("classname").  I do this to avoid adding again and still the same style and inflate the underlying list.  What is the right way to manage dynamic CSS styles?

  Finally a very simple I think.  So I know there's a little differently to implement a splash screen.  My app has certainly got bigger in the last few months of development and I noticed there are about a 5 second delay between when I run the application when I see the main stage.  I was thinking what a splash screen would be nice to fill that time.  I had no time to prototype using a Preloader and I fear that using another, early stage start-up again would be too long of a delay.  "I actually thought that using the Nice and simple JVM argument" - splash: image name > "would be simple, easy and effective.  Unfortunately when I try to do, the splash screen appears but never goes away.  Anyone know what is happening with this?

  Your mechanism to manage the css style classes is a good approach; I've used several times. I wonder why the style classes have been implemented as a list, instead of a game, but there may be cases of good use for the use of a list.

  In some cases you can also consider using CSS PsuedoClasses, which were presented in JavaFX 8. Here is a little easier to use, especially if you have two options. But a use case might look like:

  public class Message {
      public enum Status { NORMAL, WARNING, CRITICAL }
  
      private final ObjectProperty status = new SimpleObjectProperty<>(Status.NORMAL);
      private final StringProperty message = new SimpleStringProperty();
  
      // constructor, getters, setters, and property accessors....
  }
  

  public Label createLabel(Message message) {
      PseudoClass warning = PseudoClass.getPseudoClass("warning");
      PseudoClass critical = PseudoClass.getPseudoClass("critical");
  
      Label label = new Label();
      label.textProperty().bind(message.messageProperty());
      message.statusProperty().addListener((obs, oldStatus, newStatus) -> {
          label.pseudoClassStateChanged(warning, newStatus == Message.Status.WARNING);
          label.pseudoClassStateChanged(critical, newStatus == Message.Status.CRITICAL);
      }
      return label ;
  }
  

  And then your css looks like

  .label:warning {
      -fx-text-fill: orange ;
  }
  .label:critical {
      -fx-text-fill: red ;
  }
  

• Firefox doesn't start and give the message "of setting werd geherintialiseerd.

  I tried everything first to solve the problem by resetting Firefox.
  When need to continue, I install version 23.
  It does not and the popup still appaers "of setting werd geherintialiseerd.
  I can't get on the internet with Firefox.
  On Internet Explorer, where I contacted you, there is no problem, but I prefer Firefox.
  Could you help me?
  Otherwise, I have to use IE.
  Thank you!
  Friend
  Fred Guldenaar

  Hello fred, often these problems are caused by a security/firewall software which does not recognize, and therefore blocks firefox: solve connection problems to websites after Firefox update

• Satellite A200 doesn't start and clicking noise

  Problems with my A200 Satellite, which is about 2 years old. 2 days ago, only it beeps once. I have

  continued his work then stop down without any problem. I rebooted again and had no problems. Then, since yesterday it will not passed Microsoft logo at the beginning upward. After waiting a while there is a click from him. Pretty much the same thing happened to me the year last with the same laptop. From scratch and reinstall the operating system solved the problem (so far).

  Of course, I can do this again, but I want to know if it of a known problem with this type of laptop or is it something I'm doing unintentionally?

  Thank you

  Hello

  You say about an entry by clicking on it. It can be HARD, I guess. I recommend you save all necessary staff if you have and be ready for its malfunction.

• Recent upgrades: KB2419640, KB976902, KB890803 when installed I can't start and get the blue screen.

  After that the installation of upgrades KB2419640, KB976902, KB890803 I'm unable to boot.  I get the blue screen.  I used chkdsk, memtest etc. No problem.  I disabled the upgrades to prevent settling.   I'm not comfortabel thereby.  Is there a solution?

  You are able to boot mode safe? If you can, do and run System Restore:

  To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option 'Safe Mode', select this option and press 'Enter' on your keyboard.

  System Restore -Windows 7 features - Microsoft Windows

  After you're booted in Normal mode, click Start, all programs > Windows Update

  Check for updates, now updates you're experience problems with, each of them right click and click "hide update".

  If they are updated driver in particular, do not install them, hide them instead, any update of the driver offered, instead of this download directly from the manufacturers Web site.

  HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Vista starts and has a black screen with a white pointer, what should I do?

  I have a toshiba satellite laptop computer with vista.  It seems to boot into an operating system, but I don't see a white mouse with a completely black screen pointer.  Is it a problem of theme, and in this case how to fix?

  Hello

  Try following the methods provided below and see if it helps:

  Method 1:

  Try logging in safe mode and check if you are facing the similar question:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to boot into safe mode, you can try a clean boot

  How to troubleshoot a problem by performing a clean boot in Windows
  http://support.Microsoft.com/kb/929135

   

  Note: Don't forget to reset the computer to start as usual when you have found the culprit. Follow step 7 on top of the kb article.

  Method 2:

  I would say that you want to run System Restore in windows recovery mode and check if it helps. See the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3:

  I suggest to update the graphics drivers on the manufacturer's Web site, click on the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, try to restart the computer by pressing F8 and in the advanced startup options, select Enable VGA Mode and check.

  Disconnect external devices and check

  Hope this helps,

• HP Pavillion DV5-1234SE does not start after the HP splash screen

  I have a HP Pavilion DV5-1234SE, which will not load Windows.

  It worked very well, I have stop him - and when I tried to start the next time, be put in place - but will only pass the first black screen with the HP logo. I'm trying to access the start menu, and tried to start in safe mode - but it will not go beyond the black HP screen.

  Any suggestions?

  Thanks for the suggestion. I ended up taking to someone and it turns out that the motherboard is fried. (Greaaat!)

  Rather than waste $350,00 replacing I'm just going to get a new laptop (not HP).

• System starts but afer windows splash screen hangs.

  OS: Windows Ultimate SP1

  After restarting my PC, when disappears from windows boot screen the screen remains black with just the current cursor.  No other accurs activity. WAITING 10 minutes and tried again.

  Produce the same results by starting in safe mode and commanf mode.

  I ran the basic system of HP diagnostrics and received this error message.

  Smart Check: spent

  Long DST: failure

  FAILURE ID: RGBRB9-00076C-9XPK1G-61CU03

  Product ID: H2M99AA #ABA

  HARD DRIVE 1

  I then ran a chkdsk/r standalone and a chkdsk /f

  The command chkdsk in both cases showed no errors have been detected except this message at the end of the chkdsk command

  Transfer failed tp connected messages in the event log which is status 50

  Note - using the windows Ultimate CD I loaded theSystem recovery tool (command prompt) Options.

  I thought it strange that when I spent in C: then do a dir, there is no file present. I found files and a directory of windows on D:

  My first thought on this is to replace the hard drive but the thought that maybe this type of error has occurred in the past and a resolution has been obtained without replacement hard drive.

  Hello

  Error code 24 characters for the (overall) Long drive self test would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your PC is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Y500 - broken display and loop infinite blue screen.

  
  

  Update:

  I just got my replacement screen and it works very well he even sent a screen xD.

  But for the blue screen problems, it is apparently a common problem to the y500s with a 16 gb SSD msata. I should not install Intel Rapid Storage or remove the SSD drive. From what I could see, the SSD is basically dead...

• Unable to start before the OEM splash screen

  original title: have Toshiba laptop with Vista home Prem when turns on it starts not beyond the screen toshiba with two msg at botton __Press F2 to design set up__press F12 for the boot menu keys __pressing don't nothing__how unlock?

  I tried several times with or power cord tried to use a cd, nothing works

  Try another keyboard just to be sure of something as simple as this is not the problem.

  If you are unable to boot normally, boot in safe mode (you never get there), boot on a disk (perhaps because the BIOS is not set to boot first from CD or it may not work even in this case),or even boot in the BIOS, then there is nothing we can do to help you.  If you can not even in the BIOS, the problem is beyond what we can try.  I suggest you contact Technical Support Toshibahttp://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp orhttp://www.csd.toshiba.com/cgi-bin/tais/support/jsp/navShell.jsp?cf=su_contact&pf=true to see if they can help or take the computer to a local computer repair shop known for diagnostic, repair or replacement.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My PC starts and displays first, not my office discovered my Start menu

  My PC starts and displays first, not my office discovered my Start menu. Where in my settings can I change this? I give so that it starts and redisplay my splash screen. Thank you very much.

  Original title: help

  

  In toolbar properties are highlighted the elements 'unchecked ' and then 'OK'

• taking about 6 minutes or longer at the start and saying in a black screen 'remove shading '.

  original title: "remove the cloak."

  My Compaq Presario desktop computer running Vista Ultimate SP2.  I added 1 GB graphics card, 4 GB memory and a 4GB USB flash drive as ReadyBoost.  Now it takes about 6 minutes or more to start and saying to a screen black 'Remove shadowing' does that mean?  Please help, thanks.

  AB

  Hello

  you don't say what version of bits you use; 32-bit or 64-bit

  read these articles on the occultation of the memory

  http://www.hardwareanalysis.com/content/topic/71919/

  http://support.Microsoft.com/kb/78528

  http://www.velocityreviews.com/forums/t185253-how-do-i-turn-off-shadowing-in-BIOS.html

  in a 32-bit vista of the most RAM system, you can install is 4GBs of RAM and it can only use 3.15GBs of that anyway

  get rid of the Readyboost which is designed to be used in the machines to improve performance which have only about 1 GB of RAM

• HP pavilion monitor go black after the splash screen

  When I start my pc, the splash screen appears on the monitor, but after that he's black. I can hit one of the f keys to take me to the start page or diagnosis, but when I change the path of startup and press on save, then enter it just go to the screen black I have also hit the f9 key to go to the diagnostics page and run the hp diagnostic tool edge who said past when I try to return to the screen black new go! at first I thought it was a graphics card problem so I replaced the former with a same something new, I also tried plugging three different locations on the graphics card, I started with the dvi connector with an adapter on my cable even not, it will display the start page, just go s strait to no signal , so I went on the VGA slot that has been, I can get to the start screen, finally I tried the hdmi port and again, I can get to the start screen, but then it GB Black I removed the ram and cleaned and was going to try to go to Detroit from the motherboard to the screen, but I got scared when I saw the black cap with the words DO NOT REMOVE this topic! I tried 2 different monitors just to eliminate this probability but now I am just confused ideas would be appreciated!

  Hi lostone64,

  The fact that you can see the splash screens makes me think that this isn't the video port or motherboard. My hunch is it could be a hard drive failure, operating system error, or problem of display settings. You never see a Windows screen until it goes black?

  Have you tested the hard drive or made sure it appears in the BIOS?

• Adobe Illustrator CC hangs on the splash screen

  Hello

  I couldn't find a similar thread with similar solutions, then we are, about 2 months ago, my Adobe Illustrator CC stopped opening. It starts up and displays the splash screen but then stops everything in "Reading Fonts" (see image below)

  I had not changed anything or downloaded everything I know and I thought it would start working again, but alas.

  I have a MacBook Pro (15 inch, late 2011) race Yosemite 10.10.1

  Things I've tried so far the problem:
  Uninstalled / reinstalled twice.

  Restarted my computer a million times.

  Cleared cache folders according to other suggestions from forums.

  Reset the system fonts and remove all the fonts in the system (by font book, if there is another way to solve the question police please let me know)

  Please help if you can, I'm at a total loss.

  Thank you.

  It is stuck on the screen:

  

  Alice,

  Point 1) and 11) less than 5 years) in the following list may be appropriate (I'm not sure if FontBook serves you well) and 6 complete), too.

  The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Tecra S1 does not start and hangs at the splash screen (boot)

  Tecra S1 model PT831E-107EQ-GR

  Problems started a month ago. Randomly, he didn't not started. After some power or off attempts it finally started and worked properly. I bought a new hard drive (Toshiba 40 GB) because it happened more often. I got Acronis True Image and planned to clone a disk to the new disk. The problem is that a cell phone now won't start any more so I can't boot from a CD or hard drive. It stops at the logo 'In Touch... "with text" Press [F12] for boot device selection menu ' and does not react any key. I tried to boot with no CD, no disk hard - the same thing. I also connected internal HD using ATA to USB adapter - even. This means that it is not a disk problem but motherboard, or other components? Is it possible to get into the BIOS before boot selection screen?

  Kind regards
  Jacek

  Hello Jacek

  Try to enter the BIOS to ESC settings initially upwards.
  The question is strange and I do not think that anyone here can offer the exact diagnosis. The fact is, you can use multiple bootable devices but if there is something wrong with the motherboard HARD drive CD/DVD doesn't work. CD/DVD or HARD disk controller is maybe defective.