Z61p does more boot to WinXP when the dock advanced

Similar Questions

• computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.

  To do this, follow these steps:

  1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
  2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
  5. at the command prompt, type the following command and press ENTER: cd system32
  6. type the following command and press ENTER: chkdsk /r /p
  7. remove the Windows XP CD in the disc drive.
  8. Type exit to restart your computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Bug: Trash does not display 'empty' icon when the Recycle Bin is emptied.

  Bug: Trash does not display 'empty' icon when the Recycle Bin is emptied. This only happens when you use customized for the trash icons. The Recycle Bin appears correctly when office is updated.

  It would be nice if someone could answer this question, as it is 8 months old.

  Click Start, type regedit.exe, and then press ENTER.

  Reach:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\CLSID\ {645FF040-5081-101B-9F08-00AA002F954E}

  Export the branch above into a REG file.

  Exit Regedit.exe

  Open the REG file with Notepad, copy the content and include it with your answer.

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• Network type changes 'Public' and does not return to work when the default gateway is detected

  Original title: Type of network not restored on ethernet cable reconnect.

  I have a Dell Precision R5500 running Windows 7 Professional Service Pack 1. It is connected to a network that is stored as a type of 'work '. When the ethernet cable is removed and replaced network type changes to 'Public' and does not return to work when the default gateway is detected. I also have a Toshiba Tecra M10 running Window 7 Professional Service Pack 1 that initially detects the network restored as 'Public', but 'Work' once again Exchange is a connection to the default gateway. Is there a setting somewhere in the strength of the network to double check its type periodically?

  Hello

  You have any other network assets wireless (specifically) running on the computer?

  Have another active network connection could also cause this.

  Allows us to follow the methods mentioned below and see if they help.

  Method 1: Run the network troubleshooter.

  When the network type gets changed to 'Public' after the cable is disconnected and reconnected. The troubleshooter should let you know if there are errors with the associated services.

  See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2: check if network discovery and file sharing options are enabled in the network and sharing Center.

  See the following steps:

  a. click on start toreduce this top, type network and sharing Center in the Start Search box, and then click network and sharing Center in the programs list.

  b. If network discovery is off, click the arrow to expand the section, click turn on network discoveryand then click apply.

  Reduce this includes this imIf that you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. If file sharing is off, click the arrow to expand the section, click turn on file sharingand then click apply.

  Collapse this includes this ima

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  
  Method 3: Uninstall the network drivers and then install the last set of drivers on the manufacturer's Web site and check the issue.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network adapter, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Audio default HDMI output goes to "not connected" when the receiver is turned off and does not reset as defdault when the receiver is turned on

  I have an NVIDIA HDMI output connected to audio receiver 7.1 Onkyo TX - NR. 818.  It is defined as the default output.  When connected, it works well.  When I turn off the receiver, the output goes to "not connected" and scene of my returns instantly becomes the default.  When the monitor is switched on again, the HDMI out remains "not connected" and audio is directed to the monitor.  If I unplug the pc HDMI cable and reconnect it, the HDMI from the receiver instantly responsive as default device.  How can I stop her from doing this change, whenever I have turn off the receiver?

  Hello

  Try this: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio-e-g-Windows-8/Nvidia-HDMI-Output-quot-Not-plugged-in-quot-Audio-not-going/m-p/1001191#M16981

  Good luck.

• Laptop Dell Studio 1555 w / Vista does not wake from sleep when the lid is open.

  I have a laptop Dell Studio 1555 with Vista Premium 64-bit. Until last night, the laptop would run mode standby when I closed the lid and woke up when I opened the cover later. Yesterday I was downloading photos from a Canon camera via USB. I close the lid when I did. When I went to open the cover later the laptop screen remained in black and white. The power button is lit, but the only way I can get to meet is to hold the power button until it turns off completely, and then restart the laptop. A difference when the lid is closed, I think the power button will blink and turn off slowly while he was really in sleep. He remains on all the time now when the lid is closed. I tried to go into power management and put the laptop from sliding when the lid is closed, but has not made a difference.

  Run the system restore and choose a restore point created just before the problem occurred. Steve Winograd, MS - MVP (Windows desktop experience)

• When the course Advanced Admin makes its appearance on the VIEW

  My question is double, first what is the Advanced admin appearing on the VIEW review and secondly when the design review will be available in the United Kingdom

  Tom Howarth

  VMware communities user moderator

  Tom,

  I received an email from VMware last night stating that the review of the business administrator is now available at various Pearson Professional Centers.  Unfortunately, the closest for me is always a trip plan.

  Whatever it is, I owe you a pint.

  ________________________________

  Jason D. Langdon

• System does not boot into Windows when a USB is installed

  It's strange.  I just installed Windows 7 Home Premium Upgrade (64-bit) of a previous Vista machine.  Has made the choice of 'Upgrade '.  Now that it is finally installed and get some of the bugs resolved, a question I still have is when a (key, post HD) USB device is installed in the machine and I run a reboot or extinguished/turned on, the system starts to boot, runs through the BIOS section, but just before trying to start Windows I get a fast blinking cursor in the upper left of my screen.  If I remove all the devices usb between PC and manually must shut down and restart it restarts in Windows very well.  What is the problem?

  Desktop HP M9350F model; 64-bit; BIOS Rev 5,29 (28/04/09); BIOS Boot Priority: floppy, CD, HD, network (note: there is no other choice shown/available USB?)

  Maybe someone else has had this problem and an easy fix is avaiable.  Thank you!

  CD,

  Well believe it or not, I realized the problem.  Not the BIOS.

  One program, I have installed is SecureDoc WinMagic.  It's encryption software, although my drive has (yet) been encrypted.  In fact I had contacted the Lim before this same thread started to think it might be because of that, but he told me it was probably my BIOS and nothing to do with their SW.

  However, last night I decided to remove their SW before my "repair" operation was scheduled.  How to have this removed SW, it's just our curiosity, I decided to start once more with a USB device installed to see if the hang up has continued.   By my surprise, the start went as usual by means of windows and office.  DAMN!  all this time lost, mine and yours!

  I contacted the company SW this morning and they found a way to modify their SW and get the boot to work (always with the unencrypted disc).

  I wanted you and someone on this thread to know the outcome, so if this happens in the future with another user, this can help to avoid long-term on unnecessary troubleshooting.

  Thank you once again for all the time you have helped me with this issue!

• Query based ViewObject does pull not all attributes, when the query has 'WITH' clause

  Hello

  12.1.2 and 12.1.3 JDeveloper

  When we try to create a custom query based ViewObject, and the query clause of "with."

  So not all the columns selected in the query are appearing as attributes of the View object in the wizard.

  This is the query. And it performs very well in Toad.

  WITH dept_count AS)

  SELECT department_id, COUNT (*) AS dept_count

  Employees

  GROUP BY department_id)

  SELECT e.first_name AS employee_name,

  DC1.dept_count AS emp_dept_count,

  m.first_name AS manager_name,

  DC2.dept_count AS mgr_dept_count

  E employees,

  dept_count dc1,

  m employees,

  dept_count dc2

  WHERE e.department_id = dc1.department_id

  AND e.manager_id = m.employee_id

  AND m.department_id = dc2.department_id;

  Only the EmployeeName attribute is extracted from the query. It does not show the rest of the attributes in the VO Wizard.

  

  (I also tried to create a VO from the EntityObject class and make it editable as false, even in this case all attributes are not displayed.)

  I was wondering if something changed in 12 c?

  It works in 11.1.1.7

  (A friend of mine just asked me this).

  Thanks for any help.

  Sameer

  Jdev dislikes the syntax

  You can rewrite as

  SELECT e.first_name AS employee_name,

  DC1.dept_count AS emp_dept_count,

  m.first_name AS manager_name,

  DC2.dept_count AS mgr_dept_count

  E employees,

  (

  SELECT department_id, COUNT (*) AS dept_count

  Employees

  GROUP BY department_id) dc1,.

  m employees,

  (

  SELECT department_id, COUNT (*) AS dept_count

  Employees

  GROUP BY department_id) dc2

  WHERE e.department_id = dc1.department_id

  AND e.manager_id = m.employee_id

  AND m.department_id = dc2.department_id

  who must work and give you the same result.

  Timo

• Set glyph scaling causes the output appearing more bold, but only when the color is on the page of the text

  The title says it all.

  Justified text - with 98% and 102% glyph scaling

  When printing it outputs the text glyph scaling affected online as a bit more "BOLD" - I see the yellow and other colors under where it is misregistering.

  But this only happens on the pages with colors.

  In preferences I have changed the appearance and precise text output, and this made it worse, so I returned out of all blacks as rich black.

  But when I remove the glyph of scale - regardless of color on the page - the text output normally - no extra fat on the page.

  Using InDesign CS5

  Windows XP

  Konica Minolta Bizhub C550

  All drivers up to date.

  Can I get Postscript drivers if that would help?

  Any ideas?

  I am not sure that I just did, but I see no here boldening (Phaser 7800, driver PS, black out with precision, but it is not serious to postscript). The text is a little dark, as I expect due to overprinting, but the weight looks the same.

• BACKSPACE, Del, arrows, Tab does not not in Firefox when the request for validation

  Hello

  I'm developing a Web site with some text requiring only the alphabets or alphanumeric text boxes to be accepted. I use the DevExpress controls and here is the javascript code that runs on keypress

  function fn_allowAlphabetspace (s, e) {}

             var theEvent = e.htmlEvent || window.event;
             var key = theEvent.keyCode || theEvent.which;
  

             debugger;
             key = String.fromCharCode(key);
             var regex = /[a-zA-Z ]/;
  

             if (!regex.test(key)) {
                 theEvent.returnValue = false;
                 if (theEvent.preventDefault)
                     theEvent.preventDefault();
             }
         }
  

  All browsers except firefox allow Backspace, Del, Tab, Arrow keys, home, end key to work perfectly. Firefox does not have one of these for work on text boxes.

  Thank you
  Rich

  Hello

  I tried to solve it by javascript debugging and found the code to work for firefox as well as on other IE10, Chrome and Safari browsers with no problems below

  validation function to allow only the alphabets and space

         function fn_allowAlphabetspace(s, e) {
             var searchSpecial = '$Backspace$Del$Home$Tab$Left$Right$Up$Down$End$';
             if (searchSpecial.indexOf('$' + e.htmlEvent.key + '$') < 0) {
                 var theEvent = e.htmlEvent || window.event;
                 var key = theEvent.keyCode || theEvent.which;
                 key = String.fromCharCode(key);
                 var regex = /[a-zA-Z ]/;
  

                 if (!regex.test(key)) {
                     theEvent.returnValue = false;
                     if (theEvent.preventDefault)
                         theEvent.preventDefault();
                 }
             }
         }
  

  Please not this e parameter passed to the function to provide the details of the function of keypress. I'm using DevExpress ASPxTextBoxes. Anyone wishing to use this function need to make changes in the code above according to the used control

  Thank you
  Rich

• Why windows search does not return a result when the file is of course in the folder my documents?

  Hello

  file search: KeyScrambler_Setup.exe
  search string: key - would find the above file
  search string: scrambler - cannot find the file!

  now I'm very confused. can someone pls tell me why? then I could correctly search and find my next record!

  Thank you! any help is appreciated!

  BTW I use win vista Home premium 32.

  and I tried the advanced search and selecting search loc: informed everywhere and all the other search criteria.

  Hello

  Windows Search does not work or research are slower
  http://support.Microsoft.com/GP/windows_search

  Troubleshooting Windows Vista search & indexing errors
  http://www.WinVistaClub.com/T24.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Research of a window does not work (but only when the folder is indexed).

  As the title suggests, I can look perfectly fine and find EVERYTHING in a folder with even the most detailed search operators, but only if I index the file. I had the same problem with Windows 7 as well and I don't know how to get around this problem. I think it may have something to do with the case in question is on an external drive but I still don't understand why this is the case. Indexing is supposed to make the search faster for a specific folder, but no matter what I do, Indexing always brings Vista only returning "no matches" for each search query. If I was of the same type in one letter, he found nothing.

  Assistance would be greatly appreciated.

  Hello

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Those are the kind of prerequisites.

  ==================================

  2. these should help to solve the issue and some tips to help.

  Windows Search does not work or research are slower
  http://support.Microsoft.com/GP/windows_search

  Troubleshooting Windows Vista search & indexing errors
  http://www.WinVistaClub.com/T24.html

  Reconstruction of the Index in Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/
  How to enable or disable the search Index in Vista
  http://www.Vistax64.com/tutorials/69564-index-enable-disable.html
  Improve Windows searches using the index: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  ================================

  Tips for finding files
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-files

  How to use advanced search in Vista Options
  http://www.Vistax64.com/tutorials/75451-advanced-search.html

  How to restore the page button on the Start Menu after installing Vista SP1
  http://www.Vistax64.com/tutorials/145787-Search-start-menu-button-restore-after-SP1.html

  How to restore the context Menu item search after installing Vista SP1
  http://www.Vistax64.com/tutorials/134065-search-context-menu-item-restore-after-Vista-SP1.html

  How to create a shortcut on the desktop search in Vista
  http://www.Vistax64.com/tutorials/126499-search-desktop-shortcut.html

  ----------------------------------------------------------

  Win Key F opens advanced search

  Searching in Windows Vista, part 1
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-1-secrets-of-the-search-box

  Part 2
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-2-Start-menu-and-control-panel-search-tips

  Part 3
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-3-using-advanced-search-for-those-hard-to-find-files

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows 7 laptop does not connect to Wifi when the WPA2 security is Active

  I have a rather unusual problem that my Compaq CQ56 laptop not not connect to my router, ASUS RT-AC56U Wi - Fi when WPA 2 security is active on the router. With WPA2 is off, it connects without a problem. But, when I turn it on WPA2 on it will not connect. This problem persists even if I change the WPA2 authentication code. All other devices at home are able to connect with the wifi with WPA2 enbabled router, and this particular laptop was able to do so until very recently.

  Just to make sure that the adapter in the Compaq works, I just went to Starbucks and it connected to their wifi unsecured without problem.

  I was using a TP-Link Wireless Range extender on the home network, but it was deleted.

  I ran the network troubleshooting and Fix - It nothing works.

  I suspect that for my home network installation file was corrupted on this laptop and I would like to know if there is a way to remove, or edit this file and start from scratch. I have a Compaq laptop earlier generation linking problem now. So I'm pretty a connection file corrupted is the problem. Just need to know how to solve this problem.

  Thanks for any help!

  See this tutorial.

  http://www.SevenForums.com/tutorials/120670-wireless-network-remove.html

• Why Muse does not once (Proxima Nova) when the other versions are installed on my computer? The police also does not appear in the system fonts.

  Hello

  I want to use web fonts Proxima Nova (as woff) in Adobe muse on my site. These fonts are on my computer.

  The otf and ttf files are also installed on my computer, but they do not appear as sytem fonts in Muse.

  When I try to add the web fonts for Muse, it gives an error.

  
  Can someone tell me how I can get Proxima Nova as a system font in Muse?

  Thank you!

  In the version of June of Muse CC 2015 Typekit fonts have been integrated into the Adobe's Muse.

  Please try following steps to add them to your list of Web fonts.

  1. go into file > add/remove both

  2. Select the tab for typekit and "Proxima Nova" police search

  

  3. Select all, and then click OK

  4. these fonts will be added to the list of Web fonts.

  

  You can also check out the link below which has documentation for the same thing.

  https://helpx.Adobe.com/Muse/using/Typekit-Web-fonts.html

  Concerning

  Vivek