0000007 a with ERROR_CODE error checking: 0xc000003c

Similar Questions

• Satellite L750 - BIOS update failed with error check

  Hello

  Update the BIOS to the L750 failled with an ERROR "CHECK". I downloaded the update to the BIOS again and got the same error.

  I wanted to submit a support ticket to do support technical namely that the BIOS update does not work, but low and behold, the creator of support ticket does not accept my model number/number combination.

  Thus, apart from picking up the phone, how can I get a message to Toshiba?

  See you soon

  Hey Buddy,

  May I ask why you are trying to update the BIOS? Do you have questions?

  As you probably know updated BIOS is always somewhat risky because it rewrites the ROM module and if anything goes not the ROM module can be destroyed and you are not able to start the computer. So this update should be made only if you have problems with the computer, otherwise forget it please.

  Remember: never touch a running system! ;)

• I get error 0 x 24 in Win XP Home, after the system hung over the error checking.

  The system is a HP/Compaq Presario SR1575CL running XP Home Edition with Service Pack 3. There is 2 GB of RAM and a 200 GB drive HARD Seagate SATA 1. I don't have a Win XP Home CD, because the BONE was preloaded on the HARD drive. HP put a section of 6 GB recovery (FAT) in the 1 Partition of the HARD drive. The 180 remaining in 2 GB (NTFS) Partition is for the OS and data. Partition 2 is expected to be the bootable partition. Recovery HP option brings back me to the configuration of the facility six years ago.

  I was checking the HARD disk with the error checking feature. The program completed the first three steps of five. The system hung up on step 4.

  The system enters a restart loop where I see the screen of the POST, the screen that allows me to choose an operating system (XP Home or Recovery Console), then the window a few seconds start screen. I tried the Recovery Console option and I get the error Mode recovery 0 x 24. I can't use any Safe Mode options, because they also cause a boot loop.

  I'm unable to get a command line so that I can try the command fixmbr or fixboot.

  I started with the Live CD Knoppix 6,7 and 12 LinuxMint and was able to see and access both partitions of the HARD disk. I was able to copy the contents of the Partition 2 to external USB HDD unsolved. I also made a copy of the MBR using DD.

  I ran testdisk_6.13 which shows the parameters C/H/S are 24321/255/63, based on the HARD drive and 25841/240/63 for the NTFS. According to the Seagate, the C/H/S for this Barracuda HARD drive Web site is 16383/16/63, which doesn't have a size for the size of 200 GB. Phoenix Award BIOS shows 65535/16/255.

  I want to fix/repair the HARD drive. Data and intact air applications. How recognizable HARD drive again?

  Thank you.

  Hello

  It seems that the hard drive has failed. You will need to replace it as it is not really a way to fix them.

• Windows Vista SP2, random BSOD with error checking code 0 x 19

  Hi all

  I have seemingly random crashes on my old laptop 3 years recently - BSOD with error checking code 0 x 0000019 (0x00000020, 0xe92f4780, 0xe92f48d0, 0x0a2a0440), and BlueScreenView says that accidents are caused by ntkrnlpa.exe and Ntfs.sys. I have absolutely no idea why it happened--unusual does update, none of the material changes & software installations. The system hangs especially after maybe one or two days after starting with some sleep & wake ups inbetween and the only accidents while there are prominent running shows - namely, all the accidents that happened while I was running Firefox. Seconds before the BSoD (shell & all) system simply freezes and does not respond to ctrl + alt + delete, but is still running (as indicated by the fact that once, I forced a power off and after that restart the event log indicates the previous stop at was not planned), then watch the usual BSoD screen.

  After doing some googling, I began to suspect that this should be a memory or a hard drive problem, or maybe an overheating causing the two since he not there no significant change of software on my computer recently again issues just appeared without reason. So I cleaned my laptop fan and the heatsink and ensured that the hot air can leave the chassis without being blocked, did some checking of memory with memory auditing Windows - no problems in 5 innings and ran chkdsk on my system partition with all available options - perfectly normal, but the chkdsk has acted quite strangely that check all took about 30 seconds and no normal as the ID information of partition, size etc. that should be there never appeared; is this a normal behavior? or something is wrong with my chkdsk?

  I'm still (lol) impatiently waiting for the next crash, not sure whether the problem is still there or not. Meanwhile could you please help me understand what is the problem with my system?

  It seems that the disc is the most likely cause. If it is intermittent, it may be difficult to diagnose.

  The manufacturer of the laptop provides any diagnosis?  Several manufacturers have a key at startup to access the diagnostics.

  CHKDSK should last several minutes. There is information about the different ways to run chkdsk here:

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  You can try this disc test program:

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/

  If the version of WIndows does not find anything. Try to use the version BACK from a CD.

• How to deal with "error: check the activation.

  I have the 4.5 digital editions on my Windows 7. Download books on my reader Kobo was a battle of the day 1. Now, I get "error: check the activation. As suggested, I'm trying to allow out of my player in order to re - authorize but ADE refuses my password. Any help would be appreciated.

  Windows:

  Close all applications.

  Click Start > run.

  Open, type regedit in the text box and press ENTER. The Registry Editor opens.

  In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept

  Select the key of the follower.

  Choose file > export.

  In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.

  Right click on the key to the follower, and then choose Remove.

  In the dialog box confirm the key deletion, click OK.

  Close the registry editor.

  Open Adobe Digital Editions and reauthorize.

  Macintosh:

  exit the Adobe Digital Editions software.

  Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.

  If you use 10.7, see https://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html

  Open Adobe Digital Editions and reauthorize.

• I'm so fed up with the error message that adobe flash broke down.

  I'm so fed up with the error message that adobe flash plugin has crashed. You got two years, in order to solve this problem, and all your proposed solutions do not work. I see no alternative but to return to Internet Explorer. It's so frustrating when I check my emails and click on a link to get the same message over and over again. Why did this problem occurs only with Firefox? It is not the case with Internet Explorer and it is not the case with Google Chrome. Otherwise, Mozilla Firefox is great.

  This from Halofromsue copied here:

  Well as I said in my last post, yesterday I disabled Shockwave in Plugins. However, as you know, you need shockwave and flash for most things... so I went back and set it to say "ASK to ACTIVATE" so when a web page loads and he needs, he will ask, and then I will either say 'Yes' or ' ' and that seems to work. So far, after three hours, it has collapsed and shockwave/flash all work fine when she needs.

  Me: it works!

• OfficeJet 6700 analysis via radio to 90% and then fails with an error of communication

  New HP Officejet 6700 Premium; no error during installation; -device not scan via radio: scan to ~ 90% with the visible image in the preview is when inaccessible window of the Scanner is returned with the error message "Scannner communication cannot be established.  Ensure that your product is turned on, check the connection... ».

  Dell Inspiron E1505 laptop. Vista; Trend Micro Titanium 2011 Dell

  1. Network wireless, print, fax work very well.
  2. Software has been uninstalled, cleaned and resintalled.
  3. Fixed IP address received.
  4. Windows drivers are the most common, HP device firmware is up-to-date.
  5. When the trend is disabled, scanning works completely.
  6. All scanning functions and work completely through USB with active trend.
  7. MS Paint scanning to the device wireless without problem with active trend.
  8. Ports below were opened in the Windows Firewall.

  TCP UDP
  137 137
  138
  139
  161

  427 427

  9100

  9220

  9500

  • Printing and scanning doctor works and ends when the trend is disabled.
  • Print and scan doctor hangs up on Scan Test and returns the same communication error window when the trend is activated but no further information or help.
  • Contacted Support of trend, which has provided information on how to create an exception in the product and advise him to: "... to add the file scanner to the program exceptions list."   Trend has been unable to give advice on what specific HP or the files to add to the exceptions list.
  • File by file, the following files have been added to the list of exceptions of trend without effect:

  C:\Program Imaging\devicemanagement\hpzscro1.exe HP

  C:\Program 6700\bin\HP Officejet HP Officejet 6700.exe

  "\HP Officejet 6700UI.dll.

  '\HPNetworkCommunicator.exe '.

  '\HPScan.exe '.

  '\HPScanDisco.exe '.

  ScanToPCActivation.exe

  ScanToPCActivtionUI.dll

  Toolbox.exe

  ToolboxUI.dll

  C:\Windows\twain_32\HP Officejet 6700\HPScanUI.dll

  '\Scanapp.ini '.

  '\hpxsTwain.ds '.

  • Device IP address correction has been added and listed as an exception in Web site.
  • Other computers are able to scan wireless unit.

  Are there other HP file or file windows called scanner of HP who participates in the scan Communication that must be added or tried?

  A short history:

  After spending 4 hours and countless computers, printer, router restarts, channel changes etc, on the phone with HP printer support, to solve this problem, I was called back to my firewall provider (Trend Micro) when the product is disables scan works. (Yes, it's the same question that I started.)  As you can imagine made me unhappy...? Since I had already made contact with them for advice on how to configure the product before posting here in the first place and, possibly, appellant assistance from the printer.

  The solution was finally trend had me to rename a file in the registry, which, I presume, caused the trend product regenerate a clean version of the file.  As trend firewall exceptions had already been saved, scan over wireless works now! I post the location of the file and registry name, unless you use the identical product etc. to modify your registry database is scary business.

  Naturally, because it was just going to be like that, scan network worked, but then the network printer showed offline and I couldn't online despite shooters evil etc.  In the end today I completely uninstalled the product and the resinstalled it and now everything works.  Hard to be too crazy about HP, when, notwithstanding this saga, HP was right to send back me the vendor of the firewall... everyone gets their turn in the barrel of the dysfunction of the technology, and it was mine.

  What a striped set incredibly complicated of technologies that we depend on.  Travis, thanks for your help and trying on it.

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Satellite L300D - recovery disk stops with an error message

  Hello

  I don't read a lot of the other post, but foung no response...

  My problem:
  I bought a L300D Vista 1Y there are no included recovery disks, so I made the recovery disc. Now, we wanted to reinstall Vista, so I tried the recovery disk, but after 15 minutes, it failed with an error message:

  After successfully in 3 partitions of partitioning and formatting them the ImageX tool starts to extract VISTA

  After about 57% C:eindows\winsxs\x86_microsoft-windows-ehome-ehcird_31...35.6.0.6000.16663_...\ehcir.ird [removeExtract ToFileByStruct WIMcopyFileEx failed]

  Retry...
  [error 1117]

  What happenes about 5 times with similar messages (but other numbers), til message
  The request could not be performed because of an i/o error

  ERROR: ImageX could not to VISTA Lawrence drive HARD C: 2 V: HDD

  Press a key...

  Aftre reading the threads, I ordered an official recovery (35 Euro!) since the Office of service Toshiba disc, but I got the same errors and messages...

  Any ideas what I should do now?

  Thank you!!

  PS I never had these problems with my other laptops...

  Hello

  My friend who s a long story.

  It's not easy to say what the reason is for this, but to me it sounds like that there is something wrong with the HARD drive. In your case I would format the HARD drive before launching the recovery disc. You can do this with a Microsoft disk to format the whole HARD drive. After that try the recovery disk again.

  If it doesn't work, you should check the HARD drive with a special HARD drive diagnostic tool like Drive Fitness Test. use Google to find it, it s freeware and takes only a few minutes.

  Welcome them

• Why 'Read a fixed number of samples' help with the error 200279?

  Hello world

  It is a question about a tip found in the explanations on the acquisition of data error-200279. This explanation it is said: '... ". reading a fixed number of samples instead of all available samples can fix this... »

  AFAIK the DAQ system buffer is a ring buffer, so we can consider having a writing position and a position of reading "in motion" along the ring. While the playback position is the position of writing, everything is brilliant. But if writing catch up reading, samples will be overwritten and therefore-> error-200279.

  So here's my question:

  I do not understand why a fixed amount of reading samples would help me with this error. I don't understand why other Councils (increase in the size of the buffer or the frequency of reading) would help me because they reduce the probability of the playback position being outrunned by the position of the writing.

  But if I read everything which is available, whenever I read the only way for the buffer fills would be that the time between two readings take more time than necessary fill the entire buffer.

  Or in other words to each reading I will read at least as many elements that it has been filled by writing since the last read, so the only way to fill the buffer would fill completely at once since the last reading.

  This should be a lot safer than reading a fixed amount, because in this case, I'd get a problem if I read it that fewer items than writing complete at the same time, regardless of the number of items that would be and no matter what the size of the size of the buffer that would be.

  What I understand here?

  Thanks and regards,

  Sebastian

  SBach wrote: this VI is a State Machine in queue, the reading part is made in the case of timeout and cases are used as initialization orders, stop and change the outside DAQ hardware.

  That I can't tell when these commands will trigger the time between two readings could not be set. If a strictly fixed amount of data could lead to a buffer to fill.

  Init command: you certainly don't have a running task.

  Stop: You stop the task, then doing here if you get overrun.

  Edit tasks: you will probably need to stop the task still before you can edit the task, but let's go back to not caring.

  The way I see it, the other commands must stop the task anyway.  If you can leave the timeout do its job and do not do a lot of extra stuff.

  And here are some alternatives:

  1. use a shift register to keep track of how long your wait time should be.  In the case of reading, make the deadline to be whatever it is that you are using.  In all other cases, only the 0 so that a read timeout must be performed immediately (once the queue is empty).

  2. When you do your check to 1.5 times the timeout, if there is too much data, queue a reading at the front of the queue so that playback will happen.  The idea is that you really want to keep the same stack sizes to keep the memory to be allocated.  So just to be read more often.

• Intermittent visa BFFF0011 with viOpen error

  I'm contacting a 2700 Keithey DMM via TCP/IP, and very occasionally, when I call viOpen, it will fail with BFFF0011 error code. Everyone knows that before and if so, what was the cause? I checked the patch ethernet lead and in any case (I think) it happened on another instrument on the system.

  Does anyone have any suggestions as to what I might try?

  Thank you

  monkeyfinger wrote:

  Thanks for the suggestion. I think it would work. My only concern with the maintenance of the open instrument is that if he loses power - I seem to remember that it causes the calling thread to hang, but maybe it's a more manageable problem!

  I'll have to give it a go.

  Thanks again for the suggestion.

  If the unit loses power VISA (modern versions of NI-VISA) calls will return with an error TMO (device found but not to recognize the session descriptor) or 1 (device not present, "always off") error simple mistakes to manage reconfiguring the device in the first case or incentive at the technology to see why the aircraft fell in offline mode in the second case.

  Any system requiring a high reliablility needs a UPS!  Thus, the power is not interrupted.  Any Long term test average of gracefully suspended for maintenance needs.

• Need help with an error report

  It is an error to a VI report which normally crashes with the error, the default checking in the configuration of the LCFN VI attached dialog box. Impossible to debug it when it crashes; LabWindows CVI rises to debug but CVI crashes too.

  The attached error report was available only after you set to "No. Error Checking" error checking.

  Any ideas what is happening with this DLL function called by the LCFN?

  Platform: Windows 7-32 + LV2013 Pro SP1-32.

  Jeff

  Jeff,

  I think those KBs are what you were talking about.

  http://digital.NI.com/public.nsf/allkb/7253D2F0D91F68058625752F005AB672?OpenDocument

  http://digital.NI.com/public.nsf/allkb/D84C9775ABD921CF8625772A005CA50C?OpenDocument

  The typical setting for this crash to switch from C to StdCall. How is the value of the function disabled?

  Can you post this free dll (or link to it) so that we can try to reproduce the problem?

  -Connor

• why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  Hi James,

  Let us know a few details about the issue.

  1. which operating system you have installed on the computer?

  2. what web browser do you use to open itv player?

  3. are you able to play other videos online on other sites?

  If you use Internet Explorer, then you follow these methods.

  Method 1:

  You can run the fix for video problems in Internet Explorer.

  Playing video files crashes or blocking Internet Explorer - Windows

  http://support.Microsoft.com/mats/video_freezes_or_crashes/

  Method 2:

  You can also follow the steps in the following article and check.

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings and Add-ons. We recommend that you note these sites before using Internet Explorer settings reset feature and re - activate the Add-ons.

  Feel free to get back to us for other queries.

• Home Vista premium: KB978338 fails with the error code 80004005

  Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7

  Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows.  The PC then realized... Updates not configured correctly - returning changes.

  Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.

  Hi gbislay,

  I think that you are able to get on the desktop after changes have been restored.

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  The system update tool

   

  Step 3: Clean boot the computer

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

  Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.

  You can see the steps outlined in the article below, which deals with a similar question

  Windows Update error 800f0826

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005

   

  Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.

  Thanks and greetings
  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft