00Thotkey.exe - missing file - Portege M200

Similar Questions

• The fcpcmcia.sys file is not found on a Portege M200

  Hello

  Someone at - he never understand the problem "the file fcpcmcia.sys is not found"? I saw in another post, but suggestions does not solve it and the post has been locked while I couldn't answer.

  I have a Toshiba Portege M200, who has the same problem when I try to put in Windows XP Tablet PC edition 2005 level. I used the recovery CD to return to XP Tablet PC edition (because the previous installation was messed up) and then tried to launch the installation of Windows from a couple different XP Tablet PC 2005 CD that I got from MSDN.

  When I try to reboot when the installation program tells me to do, he runs the Windows Installer, but it quickly fails with the "the file fcpcmcia.sys is not found." She did not mention a location where the file is supposed to be. I can't get into Windows XP Tablet PC (first edition) very well and I see there are 3 files fcpcmcia.sys hard disk.

  Any ideas? I have to upgrade this Tablet PC for the 2005 edition, because some software I need to run demands it. I tried to reinstall the fcpcmcia.sys (drivers FreeCom) but that did not help.

  The CD player I use is a Targus slimline CD-ROM/DVD-ROM (PCMCIA, USB not) which is recommended by Toshiba on their Web site.

  Thank you

  Bob

  Hello

  It is difficult to say why this message.
  The problem is that you have installed the OS of the original note Toshiba recovery CD.
  On the page of the Toshiba driver I found the cardbus driver. Maybe you need this driver?

  Usually if you install the new operating system, you must install the correct drivers Toshiba in the right order. The chipset utility, cardbus, common modules driver are very important and must be installed first.

• run missing files rundll32.exe missing. Unable to open many programs

  Infection Trojan horse on Sunday, McAfee detected and removed on Monday.  run missing files missing rundll32.exe can't open most of the programs without having to 'open with' quick screen.  Have tried the solutions to similar problems, without success.  Cannot use the restore system or clickfree. AM running xp service pack 3, any suggestions?

  He hides on your part.

  The dllcache folder is a hidden system folder (normally).

  The dllcache folder is where XP keeps copies of important system files.  Windows file protection monitors these files when your system is working and if it happen never disappeared, PAM quickly and quietly replace it using the copy in the dllcache folder - this is why you put the rundll32.exe file in both places...  One in the dllcache folder is the backup.

  If you want to use Windows search, you need to go to the Advanced Options section and select the search system folders and enable folders and files hidden research.

  If you use Solution Explorer, while you're looking in the c:\windows\system32 folder, you must:

  Click on tools
  Click on the folder view tab Options
  Enable: Display the hidden files and folders
  Disable (uncheck): Hide extensions of known file types
  Disable (uncheck): Hide protected operating system files

  Then, you'll be able to find and navigate in the dllcache folder.

  When you are finished, you can set your options to view back the way they were then you don't have an accident one day in one of these folders.

• Error message WLMON or WLMON.exe, the missing files and WPC54G

  Portable running Linksys Network adapter card WPC54G

  OS: XP

  Driver version: 4.100.27

  I get an error message that WLMON.exe has no inialize, and a second pop up that tells me that there are missing files. Can someone tell me if there is a fix to this addition WLMON out of my boot ini and the devil made WLMON.exe? Did he get the same problem and have a solution?

  Do not install the Linksys monitor... just install the driver.

  Remove the Linksys adapter and uninstall the Linksys software menu programs... Re - install drivers insert the CD of Linksys install in your CD-ROM drive, when the welcome is displayed click on exit, connect your USB adapter now... When the Hardware Update Wizard window appears, click on install the software automatically (recommended) and then click Next... Click Finish when the installation is complete.

  Click Start and open the control panel and double-click on network connections. Right click on wireless network connection, and then select view available wireless networks "-If you see your network wireless in the list, the highlight by clicking 'single' on it now, click on the 'Connect' button below-if your wireless network is secured, it asks you to provide the network key - provide the wireless network key and confirm again in the confirmation box and click 'Connect'." It should work...

• RDPCLIP. EXE missing startup file (system32 dir). Unable to restore the system because of missing file unspecified.

  Windows 7 (new machine, not updated). Autoruns shows this file RDPCLIP. EXE be found at startup. This file is usually located in the System32folder. Unable to restore the system of time earlier because of unspecified missing file (rdpclip.exe?). System seems to be runnuing normally except these two questions. Occasional freezes (once just by renaming the downloads folder). How can I get
  new file restored to the version of Windows 7?

  Note: CLIP.exe is in the System32 directory.

  Hi bigdome6984,

  If your machine acts as a Terminal Server, i.e. someone else connects to your computer using remote desktop, then rdpclip.exe will be loaded on your computer as part of the functionality of Server Terminal Server.

  RDSCLIP is loaded on the computer, allowing other machines to connect via Remote Desktop.

  It should be found at the following registry location:

  HKLM\SYSTEM\CurrentControlset\Control\Terminal Server\Wds\rdpwd\StartupPrograms

  Important Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support

• How to get off the Vista of Portege M200?

  Hello

  I inherited Portege M200 from my boss, and he has updated using an external DVD from XP Pro to Vista Ultimate. Slow as a slow thing, very few pilots etc, meant that I am determined to go back to XP Pro.
  I (128, 1 Gig and 2 gig options) SD cards and USB HP dvd1040e external drive, and XP Pro Tablet records.

  I tried to select the devices to boot from the toshiba start screen, selecting SD or external DVD, but nothing helped. I changed the boot sequence in the Bios (hit escape and F1 at startup screen spalsh) and tried all combinations. I copied the image file to $TOSFD00.vfd on the SD card.

  I managed to loop the machine, in all configurations, so that I just get support PXE-61 test failure, check cable PXE - MOF existing boot lines agent, then go to the Boot Manager Windows asks me to insert the windows installation disc as winload.exe may be damaged or missing. I removed the drive, checked that the winload.exe is present on the HARD disk, it is, and it is in its original version / size / format the date created.

  Someone at - it a suggestoin which stops me pulling my hair?

  Thank you

  Hello

  If you want to start from the CD or DVD you need a compatible external CD/DVD drive! Without that player you will not be able to reinstall Windows XP from the CD!

  But the boss installed you the Vista operating system by using the external drive. Why you n t use the same drive to reinstall the XP?

  The install form SD card is not possible! And if you want to install the image using the LAN you must configure a server

• Portege M200 - CPU runs only at 598 MHz! Basic BACK Toshiba Service tool

  Portege M200 - CPU runs only at 600 MHz

  I have a Portege M200 with a Dothan Pentium M 725 supposed to run at 1.6 ghz, but posts a 598 Mhz
  frequency. I updated the bios to 1.8.

  I read in a previous post "locked"...:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63390

  .. He's supposed to be a base of BACK of Toshiba utility to fix the problem. .
  It is said that this is not a Bios problem...

  Can someone direct me to this utility?

  Thank you!

  Gary

  The answer is here... thanks all and who is responsible for:

  http://forums.Toshiba.com/T5/Qosmio-laptops/598-MHz/TD-p/194566

  The key is a utility called 'pom200t1 '.

  You will need the following.

  A floppy disk or if you do not have an external floppy drive, or if you are common sense to be able to boot a file from a CD player.
  You must also WinImage, as all files that you download come as .ima files
  Download pom200t1 - V1.5.zip and pom200t1.zip (if if doesn't work either).

  You can find them here:

  http://www.stormpaintball.com/Toshiba/pm765.bin (this one is a ditch last attempt).
  Then follow the instructions on the site I posted before:

  Symptom: CPU remains constantly 598 MHz.

  * Process: *.

  (1) boot in the BIOS. (Press "Esc" during the boot process, before the loading of the operating system, but after having entered your password, if you use the startup password protection).

  2) look under 'Other' category.

  (3) if the motherboard does not have enough information about the CPU, the category 'Dynamic CPU frequency Mode' appear on (you won't see it).

  If the laptop is in this state that he won't ever faster than 598 Mhz until you perform the following procedure.
  Note: Although this utility said it's for a Toshiba Portege M200, the particular difficulty you need may work on other Toshiba laptops.
  He has worked on 3 different Toshiba Satellite Pro M15 S405s, but * USE at YOUR OWN RISK *.

  (1) start Windows and create the startup disk in the pom200t1.exe file.

  (2) boot from the diskette you just made.

  (3) in the menu, select the initial repair option 2 "set config".

  (4) in the following menu, select option 1 'Initial cofiguration"(misspelled)

  (5) after a few seconds, you should see "Writing a file is over!" and the laptop restarts automatically without asking for confirmation.

  (6) when restarting the laptop go back into the BIOS and look under 'Other' category. You should now see the "dynamic CPU frequency Mode". Make sure it is set to "Dynamically switchable" for the CPU limitation.

  7) restart Windows and make sure that the CPU can throttle in normal conditions. The Intel SpeedStep technology icon should now be in the systray. Go to the Toshiba power management / Power Saver Properties and update all of your methods to save power to use technology SpeedStep that you prefer (fixed or automatic) and mount all caps speed processor, or you can go above 798 MHz because cursors will always be to their previous settings (4 or less), while they can now go up to 7. Let me know how you go.
  I have fixed the CPU now just need to find out why my fan only works when I activate it manually!

• Portege M200 - bought on Ebay and frustration comes

  Hello

  I m new here and I want to ask for a warm welcome. I purchased a M200 on Ebay and he received two days before. The M200 hasn t had a DVD player and I have no recovery CD or software for my Toshiba. I have a Toshiba external slimline PCMIA CD-ROM, but more of him later.

  I found a lot of information based on this topic, but really nothing has worked for me, that article why I ask my questions here. So far, I'll tell you what I tried...

  I bought VISTA Home Premium and want to install on my M200.

  On my M200 FreeDOS short.

  I tried:

  1. use my USB drive as a floppy using a HP tool that simulates a USB drive as a disc of floppy (FDD). I ve a copy all the contents of the Vista DVD for my USB. Then I ran the BIOS on the M200, select FDD as first boot option, but nothing happens, it still start FreeDOS.

  What I'm doing wrong, Boot USB (diskette) works on the M200?

  2. as there is an external Toshiba CD Player included in my M200, I thought the first installation of a Windows XP disk. In the first period the player seems to not work, but after some time, it worked and I put my Windows XP on it. He loaded the disc, and the typical blue screen for the start-up of the plant came. But after a few seconds he stopped and said "could not read the data xxxxxx.xx, error 7. I tried two more times and same error appeared, only that it was another file that could not be read, and another error number.

  I read and I don't know if it's true:

  I have red somewhere that I can only install Windows XP which was used on the recovery CD from Toshiba (that the CD was not included in my M200). So I can't use for OS install the recovery CD and any other normal XP CD?

  Or is there an error with my external CD drive? Currently, it doesn't work again...

  3.

  I have red the following link to install Vista on M200 by a PXE server:

  http://flimflan.com/blog/InstallingVistaOnYourToshibaM200.aspx

  and this one

  http://home.allegiance.TV/~joem298/

  The first link says I can go point 13 of the second link:

  Umbrella and that's what bothers me. They tell me. Turn on your Toshiba M200 and press F2 to select the network. I press F2, but nothing happens, I see the Toshiba logo but nothing happens... If I press on enter, then come back to FreeDOS...

  Also on the second link, I tried to start from the point 1. But in point 5, the word:

  Unzip the contents of "BFD package full v1.0.7.zip" in a temporary directory. Open a command prompt and navigate to the temporary folder. Run the command "bfd msnet" in order to create the startup disk.

  I don't have a floppy drive. They tell me to run bfd.msnet from the command. Cmd.exe command is? If Yes, what should I type in to get bfd.msnet run?
  ---------------

  I knew that installation would be very difficult and I kindly ask for personal assistance. If you can speak German, it would be nice to answer in German.

  Up to now
  Ahmed

  :/

  Hello

  As you can see in this thread, you can install Vista on the Portege m200 and it works fine:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=73510𑼦

  The point is you need a PCMCIA compatible CD/DVD drive to boot from the Vista DVD.

  This thread will show you how to install OS without using the external CD/DVD drive:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232

  It describes the procedure for Portege R100, but it should also works on an M200

  Good luck

• New hard drive installed on Portege M200 but does not start

  I upgraded the hard drive in my Portege M200 from 4 GB to 80 GB using Parted Magic to clone the original disc. Cloning complete successfully, but instead of starting with the new drive, the M200 simply display a blinking cursor when turned on. Any help is very appreciated.

  TIA, update

  Hello

  Maybe you can try one of the below to solve your problem:

  BUT! ALWAYS keep a backup!

  Boot the system with a flexible BACK (with fdisk.exe inside) to restore the MBR by typing

  FDISK/MBR

  This works even on a SATA drive. Start alternative all Win2k or XP installation CD, go to the console command and issure of recovery

  FIXMBR

  See you soon

  Tom

• Portege M200 - unable to access the recovery console

  Hello

  Yesterday my software anti-virus let me know that a virus was trying to access my computer, had quarantined it and claimed a reboot of my Portege M200 to remove it completely. Restart, the laptop is not actually restart and just hung. It gets past the Toshiba window and crashes. I tried to start in safe mode but nothing helped. It starts to load files and crashes to a particular system file that is obviously now corrupt. I tried to enter my recovery console using Windows XP Recovery discs, but was unable to do so. The discussions on this forum have been useful, however I still have not solved the problem.

  I have my product recovery DVD-ROM, but I'm afraid to use it as the next warning with her said that reformatting will lose all my work and I do not know if it will automatically reformat my hard drive (which I have no back ups of my work) or I will give a choice? Also, I see BONES of your forums, that it will correct not actually of corrupted files. I've also seen queues to make an image ghost on a floppy drive but I don't have a floppy drive on my Portege M200.

  Can someone please provide me with the steps to solve this problem, as I am of 11 hours trying to solve this problem, but nothing helps!
  Thank you

  You are right about image recovery. Recovery image is designed to clean BONES only and there is no option for the repair of the BONE. What you can try is to get the disc of Microsoft WXP installation and Startup Repair option.

  I hope this will help you and you will be able to boot OS preinstalled. If it will work on the first back up all your important data.

• Can not install Windows on Portege M200

  Hello
  I bought a Portege M200 opportunity. I discovered that the HARD drive was broken, so I bought a new one, plus a (160 GB)
  I know the problems Porteges can do when triing to install the OS on them, so I used this tutorial for installation of the network:
  [http://blog.ryantadams.com/2008/02/01/how-to-boot-from-the-network-pxe-boot-with-tftp-and-windows-pe/ | http://blog.ryantadams.com/2008/02/01/how-to-boot-from-the-network-pxe-boot-with-tftp-and-windows-pe/]

  everything worked well. then, my xp installation 'button' was grey, so I went with this tutorial:
  http://blog.ryantadams.com/2008/07/30/option-to-install-Windows-is-grayed-out-when-running-network-install/

  that worked well, too. The installer kopies some files and the desire to do a restart. So he brought me to Windows PE, I typed 'wpeutil reboot' as described in the second tutorial. My PC has started again and then nothing happens.
  I chossed "boot from HDD" and all I can see is a black screen with a small flashing underscore white top.

  IT IS REALLY FRUSTRATING. I also tried another method, for example the back of things (like I got [my R100 to work | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=120473]), with the same result.

  Thanks a lot for your help!

  You have a smaller HARD drive you can try?

  The M200 may be limited to 120 GB HDD due to the LBA48 137 GB limit. More info here: http://www.48bitlba.com/

  Ultimately, you must use the original Toshiba Portege M200 recovery disk to reinstall Windows. You can order from Toshiba https://backupmedia.toshiba.eu/landing.aspx

• Portege M200: Graphics need Win 7 driver for Hibernate/sleep, rotation

  Hello

  I recently bught use M200. I installed Windows 7 above. It works really nice.
  I use it with ' Toshiba Portege M200 Tecra M4 Multi Dock 2 PA3315E-3PRP ' and a second screen with a resolution of 1680 x 1050.
  Now I am looking for a witch of recent driver has the following features:

  Work screens, Hibernate / sleep, rotation.

  * Problems with 97.52: *.
  Does toshiba drivers wrong with screens, if the outside is connected inside stops working, is not more recognized in windows and you can't put it back to work... (see the nvidia Panel but you can not activate it)

  At the same time the internal screen stops working, the external screen in rotation.
  So right now, I don't have a working screen.
  The same problem I have with all the drivers from the 97,29 version.
  With the version of the driver 101,70 graphic glitches extra one there the second screen of rotatet.

  With the version of the driver 156.55 both screens are gray after installation of the driver...

  The pilot previus to the working version of the version 97,19 to 96.33 without hibernation / sleep (glitch)

  The works of 95,62 driver with Hibernate but external resolution is only 1600 x 1024(can be modded), but if you turn the knob to another landscape all black rest until you rotate to the natural landscape...

  The pilot 88.61 has without hibernation / sleep (gray)
  ----------------------------------------------------------------------

  If anyone has any advice for me what can I do to get Hibernate working with old drivers or the second screen with latest drivers?
  Do not install XP, its installed but not used because windows 7 RC came out and made for tablets... I can't miss more...

  * [PC-information] *.
  Modellname Portege M200
  TEILENUMMER PPM20U - 004CD 4
  Serial number 44053610HU
  BS-Version Microsoft Windows 7 Ultimate 6.1.7100
  Version of the BIOS Version 1.80
  Processor Intel (r) Pentium (r) M processor 1.60GHz
  2048MB RAM Arbeitsspeicher
  Festplattenkapazitaet 116,512,714,240 [bytes] 108.511 [GB]
  Kapazitaet of the freien Festplattenspeichers7, 886, 950, 400 [bytes] 7.345 [GB]
  Video NVIDIA GeForce FX Go 5200 32 / 64 M Version = 9.6.8.5
  Bildschirmaufloesung 1050 x 1400 Pixel
  Farbqualitat True Color (32 bit)
  Ohne sound
  Netzwerk Atheros AR5008-Drahtlosnetzwerkadapter Version = 2.0.0.70 MAC address = 00:1: 0F:B2:97:60
  Intel(r) PRO/100 VE-Netzwerkverbindung Version = 8.0.47.1 MAC address = 00:08:0 D: 8B: FE:FA
  Modem TOSHIBA Software Modem Version = 2.2.89.3
  Internet Explorer 8.0.7100.0
  IDE-Gerät ST9160821A ATA Device
  Edit/Delete Message

  Akuma is right. For the time being, you can use Windows 7 for testing purposes. Official Windows 7 will be support begins when Microsoft, it offers for sale. So far, Toshiba or any other manufacturer offer some Windows 7 compatible drivers.

  I installed Windows 7 on my Satellite Pro P300 and use it without a driver.

• Portege M200 recovery process does not work

  I want to re format my old M200 of 4 years using the original recovery disks (4).
  The recovery.txt file that is stored on the first disc advise me of a process for this, but also States that "this utility does not if the drive has been formatted or converted to NTFS.

  My C drive is NTFS, and the recovery process does not work.
  I'm unable to find any other documents or files on the drives to advise me what to do help.

  I would be greatfull for anyone who has experience with this issue who can advise me on the correct process to run my recovery on a drive formatted as disks

  NTFS.

  May I ask what laptop do you have: is it a M200 Satellite or Portege M200?

  How have you tried to recover the laptop?
  Have you tried to boot from the CD?

• Vista on Portege M200 - some problems with nVidia display driver

  Hello

  I recently decided to update and perform a clean installation of Windows Vista on my Portege M200, now that Toshiba have released official drivers for this machine.

  Everything works fine, EXCEPT the nVidia display driver. I have the following questions with the driver Toshiba provides for this machine (97.52 version):

  (1) when the screen turns off to save power, the backlight does NOT turn off. Screen turns off but the backlight will stay lit.
  (2) for the recovery of the standby mode, the backlight is OFF. You must use the shortcuts Fn-F6/F7 to change the backlight level manually, that will bring him back.
  (3) external monitor does not work (with command Fn + F5 or nVidia control panel). External display is always blank.
  (3) video playback in WMP is very chopped (a secondary concern for me).

  Is there a chance that Toshiba could finally get a updated driver that would set out the? That would really make this machine fully functional in Vista.

  Thanks in advance for any help or information.

  Null value

  Hello

  > Are there opportunities that Toshiba could finally get out an updated driver?
  I noticed that from time to time new updates of pilot (any series of notebook) are released on the European driver Toshiba page and, therefore, I m optimistic that new updates are available

  But note; usually, various problems can be resolved by installing some patches MS Vista and missing patches.
  Then visit this [MS update website | http://www.update.microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us] and check if all the patches are installed.

  Best regards

• HP Pavilion DM4: HP Pavilion DM4 missing files problem

  I have a laptop HP Pavilion DMf that I'm trying to make it work properly

  who has missing files

  After I connect to the computer as an admin user

  I get the following message

  API-ms-win-downlevel-user32-| 1 1 - 0.dll

  is missing on your computer

  When I cancel this message box I could

  get get a Firefox browser and browser Chrome to work

  and connect to Web sites

  but Internet Explore triggers the following message

  API-ms-win-downlevel-advapi32-| 1 1 - 0.dll

  is missing on your computer

  some of my applications such as

  Media Player, live mail and HP Security Assistant

  trigger the following error message

  API-ms-win-downlevel-ole32-| 1 1 - 0.dll

  is missing on your computer

  My infographic connects to my wifi internet connection

  I ran the file sfc.exe schecker propgram and when it ends

  it say found missing software

  I was able to open the cbs.log file it creates

  but I do not know how to interpret the results.

  Also I could use instructions on how to recover

  the missing files that it identifies.

  I'd appreciate any help that you can come on me

  to solve my problem

  Hey @wsigner ,

  You need to try a clean Windows installation. Here's help on how to do it.

  Thank you.