0x1000008c and 0xc0000005
Are there ways to prevent the closing down and the screen because of the mistakes above blue
- What were the changes made before the issue occur?
- What is the full error message that you receive?
- Are you able to boot to the desktop?
- When this happens?
a. restart your computer.
b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
c. using the arrow keys, select the desired option of Mode without failure.
d. press the Enter key on your keyboard to start in safe mode of Windows Vista.
e. when Windows starts, you will be at a typical logon screen. Connect to your computer and the Windows Vista goes into safe mode.
f. do whatever tasks you need and when you are done, reboot to return to normal mode.
Step B.
See the article below for instructions on how to start your computer in a clean boot state.
http://support.Microsoft.com/kb/958233
Tags: Windows
Similar Questions
-
Original title: I need emergency with a blue screen error after new Athlon Proc and motherboard.!
I had to fix my computer professional brothers due to its motherboard out. So, I advanced and ordered a motherboard latest and processor and also much more memory because the PC was about 6 years old. After installing, I he started and configured the BIOS and thought that it should start right up because it was working fine until the motherboard is out and also I left to himself, the hard drive that has XP installed, because he was also big enough for what he needs. But instead of cranking up XP, I get this error every time even when I try and boot in safe mode.
I have also ordered him a new copy of Windows 7 to update his OS, but until I can get into XP and do an upgrade, I'm stuck. (I have to do an upgrade because of her inability to save his business files before exiting the motherboard.)
* Without the [] error code: [stop: 0x0000007e (0xc0000005, 0xba2cb756, 0xba4c742c, 0xba4c7128)]
Any help will be greatly appreciated, thank you.
There is the old motherboard-specific drivers (for example, video, network, bridge, BIOS, etc.) in XP loads that are not compatible with the new motherboard. Conversely, you may need drivers specific to the new motherboard (see the disc that came with the motherboard for details). You might have to perform a repair installation on the existing XP. When you started on the XP installation disc, do not take into account the first mention of repair and then accept the option the second time, you are prompted to repair the existing installation.
To be honest, you also get a new drive of 500 GB for Windows 7. A hard drive of six year, or approximately 80Gb (...?) and who will get eaten up real quickly by installation of Windows 7. In addition, I don't think you can update directly from XP to Windows 7. I'm sure that there must be a Vista installation in the meantime, but I was called incorrectly.
-
0XC0000005 error printing "Lexmark Web gateway has encountered a problem and needs to close"
0xc0000005
Recent problems with my Lexmark X 7675. After printing, I get an error message that says:Lexmark Web gateway has encountered a problem and needs to close.
I think it's a problem with the latest Windows updates. I use XP SP3 and that you have not seen this problem until this last week.
Find C:\WINDOWS\system32\spool\drivers\w32x86\3\lxdwwbgw.exe and delete or rename it so that it does not work.
This program sends just the stats of the printer for Lexmark.
-
0x0000007E (0xc0000005, 0XF7B068F0, 0XF7B067F4, 0XF7B064F0
I tried all that I need help. I tried to fix what I did just as much as to reinstall and the first time that I start it, it displays this error message. I have an acer with an intel atom clocked at 1.6 Ghz prossesor and a memory of 1 GB and 80 GB HD with the H2O bios so that you can help me please.You probably have the hardware failure. It is a brand new computer. Return it immediately for replacement. MS - MVP - Elephant Boy computers - don't panic!
-
Today, I started my computer as usual worked well. After about 30 minutes of use it has restarted without having to provide me at all. When the computer reboots, it starts as usual, after the XP loading screen, it goes to blackscreen for a second, then a blue screen error message appears, then disappears. The error code given is:
STOP: 0X00000007E (0XC0000005. 0X87F23B2, 0XF793D26C, 0XF793CF68)
I managed to take a picture of him just during one of the reset and got this. Incase you need to see the full message. http://img21.imageshack.us/img21/9268/1image0421.jpg
Initially I thought it was a stick of RAM going bad, so did reinstall each stick etc. to know who does what, and all the sticks started the computer at this point where I get the blue screen. Then maybe this issue is not a RAM? I have NO idea what this error code is... Does anyone have an idea? I did my share of research on the internet and that you have not really found any answers for my situation.
Solved. I put in my XP CD and booted from it, press ENTER for a new installation, then to the next option, press 'R' or a repair installation. After he went on his own thing, its up and running again, and all my files/preferences have been saved too. The only thing that was wiped out was my WINDOWS folder, so I just need to download IE8 and updates for XP etc.
-
Original title: try to put wrong question ID problem!
Due to problems of Java, I formatted and made a new installation. My Vista Home Premium says its active. When I try to put my product id was not found. When I try to leave microsoft to find that they can't pick up my computer and I can't enter by hand, he said its incorrect. When I try to ask online chat, I cut that they deal with activation problems. It is activated, I can't get the Web site recognize my product id, so I can post for help? The world is - that sound familiar at all?
I have fatal routine Java errors when I play a game Runescape. I'd appreciate any help anyone could give me. Thank you
A fatal error has been detected by Java runtime environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6d884dca, pid = 3032, tid = 2976
#
# Version JRE: 6.0_30 - b12
# Java VM: Java hotspot Client VM (20, 5 - b03 in mixed mode, sharing windows - x 86)
# Problematic frame:
# V [jvm.dll + 0x94dca]
#
# If you want to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
#Hi Verisetti,
Have you installed security software after formatting windows?
If so, you can uninstall the security software temporarily and check if you receive the access violation error.
If the uninstallation of security software solves the problem, you may need to configure the settings of the software of safety accordingly. Please contact the software vendor for assistance in this regard.
Note: Make sure that you install the security software after the trial.
What about Windows vista product ID, you can try to validate Windows and check if it helps.
For more information, see the following articles:
-
Error: 0xc0000005, installer of Windows modules stopped working and the launch failed password
Original title: Hello,.
my Dell computer is running the following errors: 0xc0000005, modules Installer Windows stopped working and the Word failed to launch. I need help with this. My system is Vista Home. Thank you.
Hello Ewazn,
· You get this error message only when you launch Microsoft Office applications or launch any application?
You can view the article in the Microsoft Knowledge Base and check if it helps.
How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
http://support.Microsoft.com/kb/2438651
Please elaborate on the question so that we can help you in a better way.
-
Blue screen and error code: 0x0000008E (0xC0000005, 0x8243BA8D, 0xE3452BB4, 0x00000000) _
I get the above error message and bluescreen when the computer is just sitting idle does nothing. Usually, it's when the internet is open, but not surf. Can someone help me understand this. The graphics card is an Intel 82945 G express shipset family and I checked to see if it is up-to-date and the pilot said he is up to date.
Any help?
Hello
Have you checked Site system manufacturer (manufacturer of custom systems motherboard), then
Intel downloads?After checking the system manufacturer's Site
Intel - Downloads - graphical value and then the other parameters as needed.
http://Downloadcenter.Intel.com/===========================================================
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65--------------------------------------------------------------------------------------------------------------
Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
other pilots to check there. Disable the installation of self as those who are older and if
Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.See methods of update driver generic in the next message.
BCCode: 8th 0x0000008E is the same as 0x1000008E
Cause
Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.
Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.
Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques:
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.
If you do not know the specific cause of the exception, consider the following:
- Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
- Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.
If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.
Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.
The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.
You can solve the problems of BIOS by upgrading the version of the system BIOS
BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
* 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-=============================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens. (If necessary)
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
It comes to my convenience store generic bluescreen:
Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
This would help. Such as ITC and 4 others entered at the bottom left. And another error
information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Blue error screen Stop 0X0000007E (0XC0000005, 0X8070194F, 0XF78DAC30, 0XF78DA12C) and when ejecting a CD or DVD
Said event system category 102 event 1003 error view
Error 1000007e, parameter1, parameter 2 8070194f, parameter3, parameter4 f78da92c f78dac30 c0000005.
Customer says that has happened for about a year. Don't know it please help
Hello
Use BlueScreenView, MyEventViewer and other methods of troubleshooting BlueScreens
See the responses in this thread - high two answers.----------------------------------------------------------
References to Vista also apply to Windows 7.
This error (7th) is usually a driver problem and display adapter (video) driver is the most suspicious if
It could be others. Antivirus/antispyware/security programs, major software and hardware (heat)
questions can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my
generic methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.BCCode: 7F 0x0000007E
Cause
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
interpret, you must identify which exception has been generated.Common exception codes are:
0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in the inc directory
the Microsoft Windows Driver Kit (WDK).Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.Make sure you have enough disk space.
If a driver is identified in the bug check message, disable the driver or check with the
Reference of the manufacturer for driver updates.
Try changing video cards.
Check with your hardware vendor for updates to the BIOS.
Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug switch... This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the/debug switch.In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
Hardware incompatibility. Make sure all new hardware that is installed is listed in the
List of Microsoft Windows Marketplace tested products.
Service system or driver faulty device. A service driver or defective peripheral system can be
responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and .chk files files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.BCCode: 7F 0x0000007E<-- read="">
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E--------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the.
http://www.NirSoft.NET/utils/blue_screen_view.html
death ' crashes and displays information about all accidents of a table.
FreeBlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
HOW DI I STOP ERROR 0X0000007E 0XC0000005, 0X8A27FB97, 0X859C1BA8, AND 0X859C18A4 CODE
HOW DI I STOP 0X0000007E 0XC0000005, 0X8A27FB97, 0X859C1BA8, AND 0X859C18A4 ERROR CODE OCCUR?
Hello
This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.BCCode: 7F 0x0000007E
Cause
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.
Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).
Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.
If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .
In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
- Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.
Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.
You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.
The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.
-------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
http://www.NirSoft.NET/utils/blue_screen_view.html
Displays information on all the "crash" of a table - freeBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
When I try and some open programs I get this error 0xc0000005
Original title:
0xC0000005 error
Hello! I'm not really good with computers, so sorry if it is really stupid.
A week ago, out of nowhere, my computer randomly had a blue screen, then restarted.
Once it restarted everything was fine, except that many programs have given oxc0000005 cases like photoshop and vlc media player.
Also other programs have been sent me errors saying that the versions of the program are not compatible with my version of windows (sims 3, civilization 5 and internet explore)
Other programs such as Microsoft office more, chrome, Firefox, windows media player work.
I did a virus scan and nothing came, so I don't know what to do next.
Hello
Sorry for the delay in response. If you are still looking for a solution, you can try the following:
As the error message has developed recently, you can perform a system restore and check if that helps.
For more details, follow the links below.
What is system restore?
http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
I hope this helps.
-
Error crashes (office and metro) app "': 0xc0000005 '"
Original title: Accidents of application (office and metro)
I am running windows 8 pro 64 bit on a lenovo ideapad z575.
Example error:The failing application name: ThumbnailExtractionHost.exe, version: 6.2.9200.16384, time stamp: 0x50109bfaThe failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000Exception code: 0xc0000005Offset: 0x000007ff732d0000ID of the process failed: 0x7acStart time of application vulnerabilities: 0x01cdb2dfc0a0d3a7The failing application path: C:\WINDOWS\System32\ThumbnailExtractionHost.exePath of the failing module: unknownReport ID: 000142be-1ed3-11e2-be67-64273786b136Faulting full name of the package:ID of the failed package-parent application:These errors are generally the same (with the exception of the fault offset [the last 2 digits can be 80])It comes up with the following programs (remember that these aren't the only programs that it comes up with):ThumbnailExtractionHost.exeWinword.exeSynTPEnh.exeSettingSyncHost.exeI contacted microsoft and they still have not fixed the problemsHelp, pleaseI saw the same problem when running windows 8 pro x 64 on Lenovo Ideapad Y580
I found this error occurs after I tried to install OneKeyTheater, when I uninstall the OneKeyTheater the error no longer appears. Hope this helps -
Hello
Running VMware Workstation on Windows 7 64 bit 9.0.2.
Created a machine virtual 64-bit of Windows 7 at the workstation to VMware Workstation, I am able to connect a USB device and it is accepted within the virtual machine.
Clone of this virtual machine using Workstation Drag & Drop in the shared VMs that throws the Exception when I click on the USB device:
---------------------------
VMware Workstation error
---------------------------
Fatal error VMware Workstation: (vmui)
Exception 0xc0000005 (access violation) occurred.
A log file is available in «...» ».
You can request support.
To collect the data to submit to the VMware support, choose "Collect load data" in the Help menu.
You can also run the script 'vm-support' in the folder my computer directly.
We will respond on the basis of your entitlement to support.
Same Exception I get when I start this VM on ESXi and use via VMware Workstation.
Journal of the fasteners.
MKS. Enable3D true or false doesn't make any difference
Thanks for the help, Philipp
Hi PhilippD!
It seems that you have reached a vice that crept into the manipulation of workstation s 9.0.2' of remote USB devices. We have fixed the problem in our internal versions of workstation, but until an updated version is made public, it seems that you need to roll back to the workstation 9.0.1 if you need to work around the problem.
Sorry for the inconvenience!
--
Darius
-
That's happened since I've updated to vista with the latest updates, so im pretty ticked off.
Now, ive tried many things bootrec - so im not really familiar with it at all.
in some cases, he said I had - 0 - installations on my computer.So I tried it - bcdrebuild and it is found 1 and I changed and that did nothing.
Nothing seems to work.
It does not start in SafeMode either, so I can't simply uninstall problems.
I really need help. Im getting married and all my info of honeymoon is on outlook, which
I can't access my desktop computer.Help me please.
JAS
P.S - Oh and restore disc I tried to ive, that does nothing either, there are lots of problems
but does not fix any of them.And I don't seem to have any system restore points, but windows tells me that what makes
them all the time by updating.Hello
Make a Restore Point while it works
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
=================================Check the updates of Windows to see if load anything, especially updated drivers, just before that the problem started.
Configuration-updates Panel Windows.
=================================
Personally, I would take the opportunity while it is trying to back up my data and update my major drivers.
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
get the blue screen for video ati3duag.dll and also 0x000008E (0xc0000005), 0xBF0C8855.
ERROR MESSAGE
I get the blue screen for video: ati3duag.dll, BFO72000, time stamp 33fb6e2af. How to find & fix the problem? Speak not disable bios memory.Also I get: 0x000008E (0xc0000005), 0xBF0C8855.
This happens when I want to watch a video.
I use windows XP Home EditionThank you
LaurieI guess you have a problem with
your video driver. You may want to update or
It may have been a version that your
hardware has problems with.Do a restore of the system in Mode safe for a time
before the problem started, may be worth a try.See the following articles:
(306084) how to restore Windows XP to a
previous state
http://support.Microsoft.com/?kbid=306084How to restore a Windows XP system to a previous state using system restore
http://bertk.MVPs.org/(315222) a Description of the Safe Mode
Boot into Windows XP options
http://support.Microsoft.com/?kbid=315222How to start safe mode in Windows XP
http://bertk.MVPs.org/html/SafeMode.htmlGood luck...
Maybe you are looking for
-
Re: Satellite U500 begins with the "not enough space in runtime area» message
I have this message at the start of my laptop U500-17: not enough space in runtime area. And after that ask me to press F1 to continue, but nothing happen, and start the windows does not work. I'm trying to get into the Bios, but I have some error an
-
Help! What is - this on my old Satellite 300CDS?
Hello! Today I borrowed a friends computer, a satellite, I think the brand I s 300CDS (it is old). because he's old enough, she doesn't have the software I wanted to use, so I tried to install "Office 2000 Premium". I worked and I shut down the compu
-
What are the ports SATA of the notebook HP Pavilion DV6, model LZ495E
Hi all I used the HP Pavilion DV6-6152er, model LZ495E #ACB Laptop got Toshiba MK5061GSYN with Serial ATA 3.0 Gb/s hard drive This phone has on chipset HM65, who have SATA2 and SATA3 ports My question what is port (speed) that comminicated on the har
-
Using Vista monitor screen is suddenly upside down. Any ideas?
-
keyboard replacement for dv2620ca
Hi all I wonder if there is a different alternative keyboard that I can get to a dv2620ca. I'm trying to find one, but it seems the only dv2620ca I can get are very expensive and expensive expedition to the France. I don't need the french keys to thi