0x800f020d wrong class ID - DNS does not resolve

Similar Questions

• El Capitan DNS server does not resolve host

  The server does not resolve host 'root '.

  I upgraded from an environment of Snow leopard server to the El Capitan 5.0.15 server.

  The server is running on a mac mini, which is now about 2 weeks old basis.

  Follow the instructions in the DNS settings. Hosts such as www.example.com work perfectly well.

  However, the server does not resolve example.com. On Snow Leopard server, I used to create records for hosts like example.com as www.example.com, but this seems to be not not more possible.

  Any idea?

  Thanks, XL

  to be more precise, that's what I get when a ping is made:

  Ping: impossible to solve example.com: Unknown host

• Problem WiFi - no internet / DNS does not work

  Hello

  I installed Windows 7 64-bit on my T500, and I have problems connecting to wireless networks.

  Everything works fine with cable networks, but when I connect to a wireless network (any network wireless) DNS does not work.

  I can ping and connect to websites using intellectual property, but he refuses to resolve domain names. I checked that the correct DNS servers are beeing used.

  I installed all the drivers provided by the update of the Lenovos system + some beta drivers from http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html, but right now I'm more sure what drivers are beta and whats release.

  Software & drivers installed:

  The version of connections access 5.42 build 6JC725WW

  11 b/g/m Realtek Wireless LAN Mini-PCI Express Adapter II (version 2007.2.1103.2009 driver)

  Microsoft Virtual WiFi Miniport Adapter (version 6.1.7600.16385 driver

  Anyone know what this could be?

  Thank you

  Trygve

  I finally found a solution. Looks like there is a compatibility issue with my VPN software and wireless drivers. (even if without using VPN). To disable 'Filter light shrew soft' for wireless Internet works fine - but there again I won't be able to use VPN over wireless who is a problem for me as well.

• I have problems with my DNS does not. It happens every day.

  I'm having problems recently with the DNS does not.  However, it is not a constant problem.  I have access to internet, and then a few hours later will have no access.  It went back and just 3 times in more than a few days., I do not have anything to temporarily solve the problem, it only happens on its own. This occurs regardless wireless or direct.  Thank you...

  original title: DNS is not responding

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Perform the steps mentioned below and see if the problem persists.
  a: click on the button "Start".
  b. in the search box, type "invite."
  c. in the list of results, right-click Guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  d. at the command prompt, type ipconfig/flushdns.
   
  Method 2: Click on the link below and see if the problem occurs.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/i-keep-getting-this-message-your-computer-appears/7b1f225b-5936-495e-be3d-9ec1d074d3b5
   
  Method 3: Click on the link below and see if the problem resolves.
  http://support.Microsoft.com/kb/928152
   
  
  Hope this information helps.

• How to make a box for error off my screen. Wrong e-mail address does not pass & I always get error days later

  How to make a box for error off my screen.  Wrong e-mail address does not pass & I always get error days later

  Hello

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would be grateful if you could help me with more information.

  • You use the Windows 8 Mail or any other email client?
  • When was the last time it was working fine?

  If you encounter problems with Windows Mail app, try the following steps.

  Step 1:

  Please go to the link below, download the file and run it.

  Run applications troubleshooting

  Download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Step 2:

  I suggest to go through the link and follow the given procedure. Here is the link for your reference.
  Solving problems with a soft

  Hope this information was useful.

• Re: ORACLE_HOSTNAME-INS-40904 does not resolve to a valid host name

  Hello
  
  I am installing 11.2 grid on RHEL 5.5 but infrastructure is
  
  Re: ORACLE_HOSTNAME-INS-40904 does not resolve to a valid host name
  
  
  I've already put the fully qualified host name oracle_hostname! can someone please! the other thing I noticed is installer of grid infrastructure is by default by choosing the IP as hostname! I'm talking about the screen where I enter host name for my name virtual ip address of the cluster nodes
  
  
  I also need to change the name to ip address virtual it is because the default Installer took more name: 10 - vip.70.22.33 (which is the combination of my ip address and virtual ip address!
  
  
  SSH works fine, all entries are in the dns and I can ping...
  
  the last time I didn't even set the oracle_hostname when I installed 11.2 on 5.4 (this time its on 5.5)
  
  Thank you

  Set you your hostname in/etc/hosts?

  For example:

  127.0.0.1        host.example.com host localhost.localdomain localhost
  ::1             localhost6.localdomain6 localhost6
  192.168.1.1        host.example.com host
  

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Labour is not DNS - DNS does not but I don't know what is not correct.

  Constantly having to run Network Diagnostics, but no other difficulty lies or it says THAT DNS does not work that I positive is not true because when I connect Ethernet problem disappears. My WiFi works fine too.

  As a simple troubleshooting step, you can put public DNS...

  How to change the address of the DNS public IPv4 DNS server in Windows?

• I remain unplugged for a long period of receipt message that dns does not when you use windows 7

  I remains disconnected for long delivery message that dns does not when you use windows 7, wired LAN

  Concerning

  NAWAB IKRAMULLAH KHAN

  Hello

  ·          When the issue started?

  Method 1:

  Run the Windows 7 network troubleshooting and check if it can automatically find the fault.

  For more information about how to run the network troubleshooter, check this link:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Get the network store event of Event Viewer logs.

  Check out this link on the event logs of the resolution of network problems.

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 2:

  a. Click Start. Type cmd in the box start the search. Right click on cmd and select run as administrator.

  b. at the command prompt, type the following command and press ENTER:

  ipconfig/flushdns (there is a space between ipconfig and /)

  It will show you the message successfully empty the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:

  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)

  e. the command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  f. If your connection to the Local network IP address is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.

  g. If this is the case, try this:

  ·          enough ipconfig at the command prompt and press ENTER.

  ·          ipconfig / renew in the command prompt and press ENTER.

  h. test it again by typing ipconfig/all to see what is the address?  (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

• Hardware swap does not resolve crashing...

  Hello, I have an iPhone 5s which has experienced a wide range of weird questions (for example, does not have a charge, hangs way random, often insensitive to the buttons/touch, drops calls, etc...)

  I took it to the Genius Bar several times. We did a restore from iTunes > restore from iCloud > replacing the screen > DFU reset, none resolved the problems.

  The Genius Bar gave me a brand new iPhone 5 s. I did a "restore to iCloud", but I have to reconnect to iCloud for contacts, notes and photos. The problems will occur again.

  Any idea what's going on? The iPhone is not used for anything else complicated, barely any extra apps beyond those preinstalled with iOS 9. I think it is extremely unlikely that I received two failures, but I hope I'm wrong...

  Thank you!

  prohnc wrote:

  I think it is extremely unlikely that I received two duds...

  I agree with you.  So let's look elsewhere for the source of the problem.

  prohnc wrote:

  The iPhone... has barely any extra apps beyond those pre-installed...

  That's good, because it means that you won't find in very many places for the source of your problem.  One or more of these applications can be very suspicious.  If they are very commonly used apps for iPhone by many people, they are probably fine.  If this is not the case, consider keeping their (and their data) on your iPhone and see if it helps.

  Also check the settings > general > storage & use iCloud > manage storage (under storage, iCloud no) and make sure that you have a minimum of 10% of the total free storage of your device.

• Fixed DNS does not not on PIX 501 6.3

  Hi all

  I'm running a PIX 501 FW and all is well except for one thing. We have a DNS on the inside and the docs setting of dns correction should automatically translate a records so that they have IP addresses 'outside' from the outside, even if they are actually configured on the DNS server with 'inside' IP.

  However, it does not work. If I for example. query the DNS server for ns.my.com it returns 10.195.0.1 and x.x.x.x not as I expected.

  Is my wrong setting or not working at all?

  Excerpt from config:

  fixup protocol dns-maximum length 2048

  public static x.x.x.x (indoor, outdoor) 10.195.0.1 netmask 255.255.255.255 0 0

  Hello

  I don't think that is what dns fixup is for.

  Try this

  public static dns netmask 255.255.255.255 x.x.x.x (indoor, outdoor) 10.195.0.1

• Local NETWORK adapter DNS does not work after connecting to Anyconnect

  Hello

  Am stuck with a problem with Cisco Any connect.

  My organization has a domain name (for example, domain.com) and the local NETWORK card is configured with the IP Address of the DNS server to resolve host names. Connectionless Cisco Any-connect the resolution on LAN is going very well and I am able to solve the COMPLETE domain name (for example, name1.domain.com).

  Now, when I connect Cisco-plug any software provided by customers, the all-connect also provides a DNS server IP in the map virtual all - Connect, and once connected to the VPN is not identify the FQDNs on local network (for example, name1.domain.com), he solves all the FQDN behind the VPN (for example name2.foreigndomain.com)

  On troubleshooting, we checked out the route for the DNS on VPN server has liked metric and resolution of FULL domain name is passing through the DNS on the VPN server. Now since the DNS from VPN server has no DNS on the LAN (or FQDN on LAN) server information it doesnot solve.

  Note: Here "domain.com" and "foreigndomain.com" are 2 separate institutions.

  I was going through some documents and seen on the split-dns VPN configuration but was not sure if it's the real solution.

  Wish I had the solution so that even that my Cisco Any-Connect be connected DNS traffic to 'foreigndomain.com' must be passed on the rest to another VPN all DNS resolution to get by using the local configuration of NIC DNS.

  Any help would be much appreciated.

  Thank you...

  Hello

  As you mentioned the right way is to set up a split in this way DNS only DNS for domain name queries FULL configured on the SAA will be routed on the tunnel to the ASA DNS server configured for the tunnel traffic

  You can get more detailed information in the following document:

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

• Unable to connect to the Internet error message, "(serveur DNS) does not". "

  Original title: connection to the Internet.

  I am really a novice in computer science.   The wifi signal is strong and I'm connected to the internet, but I can not connect or when I do connect it falls to me as soon as it connects.  Where is my problem?   the only statement I received is that the computer is configured correctly, but the device or resource (DNS server) does not.   Can anyone suggest what to do next?

  Hello

  This problem may if the router is not configured correctly or if the TCP/IP settings are incorrect.

  1. What is the brand and model of the computer?

  2. when, exactly, you get this error message?

  I suggest you try the procedure described in the article and see if it helps.

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7
  http://support.Microsoft.com/kb/2779064/en-us

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• default DNS does not not in l2tp/ipsec

  Hi all

  We have Setup l2tp on asa, everything works except the default domain that is not defined. This is necessary because all the links does not provide full dns:

  It's cisco config:

  IP mask 255.255.255.224 local pool ClientVPNAddressPool 172.16.31.1 - 172.16.31.32

  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set TRANS_ESP_3DES_SHA TRANS-ESP-3DES-MD5 ikev1

  card crypto PublicTESA_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  PublicTESA_map PublicTESA crypto map interface

  internal DefaultRAGroup group strategy

  attributes of Group Policy DefaultRAGroup

  value of server DNS X.X.X.X Y.Y.Y.Y

  Protocol-tunnel-VPN l2tp ipsec

  value by default-field AAA. BBBBBBB

  the address value ClientVPNAddressPool pools

  It's windows ipconfig/all:

  Useful PPP VPN from Cisco ASA :--> name of the connection

  Sufijo DNS specific para the conexion. . :--> suffix DNS specific connections (in WHITE)

  Descripción...: Cisco ASA VPN--> description

  Dirección física... :--> physiqueet address

  DHCP enable...: don't--> active dhcp

  Automatica habilitada... config: if--> active auto config

  172.16.31.1 (Preferido) IPv4 address... :--> IP address

  Subred... mascara:--> netmask 255.255.255.255

  Puerta of enlace... by default: 0.0.0.0--> default GW

  Servidores DNS...: X.X.X.X--> dns servers

  Y.Y.Y.Y

  Sober NetBIOS TCP/IP...: enable--> net bios on tcp active

  Thank you!

  Hi Jose,

  L2TP over IPsec will not be able to receive the DNS suffix.

  This is a limitation of the PPP. More information:

  http://cdetsweb-PRD.Cisco.com/apps/dumpcr?identifier=CSCse74376&parentprogram=QDDTS

  Marcin

• & quot; The class being compiled does not match the class that was imported & quot;

  -Actions on the timeline in sixSpices/updateSite/updateSite.fla---
  
  com.sixspices.updater.view import. *;
  var calDrawer:CalendarView = new CalendarView(); Listener / view
  
  file---sixSpices/com/sixspices/Updater/view/CalendarView.as-
  
  Class CalendarView {}
  public void CalendarView() {}
  }
  public void onRecieveData(listOfEvents:Array) {}
  displayEvents (listOfEvents);
  }
  public void displayEvents(listOfEvents:Array):Void {}
  trace (listOfEvents);
  }
  }
  
  When I test the movie (updateSite.swf) in flash, it gives me the error:
  The class being compiled, 'CalendarView', does not match the class that was imported, "com.sixspices.updater.view.CalendarView."

  I thought about it (with a little help from more advanced google search). I had to import the package ' import com.sixspices.updater.view. *; ' in the CalendarView file. I thought it would be counterintuitive because it does not use himself - he himself - and the structure of the file should be denoted where it existed. However, once I did the import, it now works without error.

  Moral of the story:

  When using the classes in several files, they should import the package they are contained in, or have their name written as:

  Class com.sixspices.updater.view.CalendarView {}

  Other discussions here