10.2.0.5 upgrade to 11.2.0.4 fails

Similar Questions

• I was downloading the upgrade to Adobe Bridge. It failed with the error 49. What now?

  I was downloading the upgrade to Adobe Bridge. It failed with the error 49. What now?

  Mcarlclapp the error States just error 49 or does a download error as well?  Also, what operating system are you using?  Finally, you are on a managed network?

• Upgrade to Firefox 13.0.1 failed

  Hello
  I tried to update to Firefox 11.0.1 to 13.0.1. After downloading, when he asked to restart, the computer never shutdown properly. I had to cold start. When I try to continue the upgrade process, it takes over again where it asks to restart the computer, so he is stuck in a loop. How can it be upgraded complete successfully?

  It should never be necessary to restart the computer to update Firefox.

  If necessary then you probably have some security software that is using or the protection of the files in the folder of the program Firefox (C:\Program Files\Mozilla Firefox\) changes.

  Do a cleaning (re) install and delete the folder of Firefox (C:\Program Files\Mozilla Firefox\) program to ensure that all the files are deleted.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 13.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will also lose your personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Upgrade to 8.1 Windows keeps failing - error 0xC1900101

  I can't upgrade to windows 8.1, that it gives me this error after sign in again:

  "Could not update for Windows 8.1.

  Sorry, we could not complete the update Windows 8.1. We have restored the previous version of Windows on this computer.

  0xC1900101 - 0 x 40017.

  The funny thing is that a few weeks ago, I've already updated to windows 8.1 but because of a bad driver and not being able to boot into safe mode, I had to renew my windows and upgrade to windows 8.0. But now I can't update to windows 8.1 more. I installed all the updates of windows, even those in option. So I did a factory reset and uninstalled everything which has not appeared necessary for windows, so the update go smoother. I found a page from toshiba with a tutorial for upgrading to 8.1 and it told me to uninstall the following:

  Genesys Logic
  Intel PROSet
  Intel Wireless Display
  Realtek audio driver
  TOSHIBA PC Health Monitor
  Realtek WLAN driver
  Realtek Bluetooth Filter driver

  and on another page he told me to uninstall anything related with toshiba so I did it all and these are programs I currently have:

  http://oi58.Tinypic.com/2ak028l.PNG

  I also tried with a clean boot but still no change. My atm graphics driver is version 8.9, while the newer version is 13.12 but toshiba not unlock updated 12.1 for windows 8.1 and I tried to install that, but he just in an endless loop of startup.

  My laptop:

  Toshiba Satellite C855-255
  PSCBYE-05000NDU

  You guys could help me please? I'm not sure what I'm doing wrong.

  Post edited by: Alicay

  Someone of your guys already check and read the solution posted in other threads here in the forum?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74631

• After the upgrade to v8, unloaded ActiveSync application fails for Windows phones...

  We have improved our 4600 to v8 Saturday.  We have an application relieved for Exchange ActiveSync and since the upgrade, Windows phones cannot synchronize and... an error message "error code: 80072F78.  iOS and Android devices seem to work OK.

  Roll back firmware with exact same parameter to 7.5 and Windows phones reconnect properly.

  Thank you for reporting this issue.

  We are able to repro the issue and is currently under review. Please stay tuned for further updates.

• upgrade ACS 5.3 5.4 fails

  Hello

  I try ACS 5.3.0.40 update to the new version 5.4.0.46. Everything looks ok:

  ACS-machine / acsadmin # application upgrade ACS_5.4.0.46.tar.gz rep01

  You want to save the current configuration? (yes/no) [Yes]?

  Building configuration...

  Save the configuration running at startup

  Application of % CARS installation required post installation reboot...

  Broadcast from root (pts/0) message (Thu Dec 6 23:36:41 2012):

  The system is down for reboot NOW!

  Successful application update

  But the ACS (vmware instance) machine cannot be started with this result: Volume group 'smosvg' not found. (see attachment for details)

  Any ideas?

  --

  Martin

  Have you installed patch 8 on the 5.3.0.40 before moving to 5.4?

  Maybe you run in CSCuc93106...

  Edit:

  Ehhmm... unlikely.

• Upgrade to Adobe Pro DC.  Failed hard drive.  Now can not find Adobe Pro DC.

  I had Adobe Acrobat XI.  In October 2015, I paid for and downloaded an upgrade to Adobe Pro DC.  My hard drive has failed, and now I don't know where to download the upgrade.  I registered on my Adobe account.  I can see the purchase and the link for the download, but when I do it download Adobe Acrobat XI.  I'd appreciate any help you can provide.

  Thanks in advance,

  Divina

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• New Fusion 8.02 Upgrade large / Win 10 update installation fails

  Hello

  27 "mac OSX in early 2012 10.11.0 and recently upgraded to Fusion 8.02 and tempted to upgrade 8 Win Win 10 and the upgrade fails with a message that says:

  "Compatibility issue:

  This PC cannot run Windows 10 here's why: VMware SVGA 3D

  Production of the display did not your screen compatible with Windows 10.  Check with manufacture for support".

  I have unchecked the selection of 3D graphics accelerated display Fusion settings, stop the machine virtual, rebooted and tried the upgrade to win 10, but always the same failure message.  I thought I read on Fusion 8 was ready to win 10, but I could be wrong.  Has anyone else had this situation? or suggestions for what I should do to correct the Win 10 upgrade failure.

  Corrective thanks in advance for any advice.

  BG

  Hello

  Please read the article here as it has a workaround:

  http://www.mikeroysoft.com/Windows-10-and-VMware-Fusion/

  --

  Wil

• 6.1.4 NSX upgrade to 6.2.0: DLR fails to upgrade with DHCP relay message

  Hey all, in the middle of an upgrade of non-prod to a greenfield 6.1.4 6.2. Did the Manager NSX, and follow-up of all controllers. Then after the VMware recommended upgrade sequence, I did the GSS. Then began the DLR. When you try to upgrade the DLR, I received an error message

  The "Upgrade Version" operation failed for the entity with the following error message.

  [DHCP] To enable DHCP Relay, DR instance must be created with a single connected LIF.

  

  Also, the router now displays status in the NSX edges pane: "failed to create/update edgeAssist interface for edge edge-3.» 404 not found. »

  

  So I tried erase the configuration of DHCP on the DLR with the button relay remove, no dice. Tried to redeploy, fail with the same message. Tried to force synchronization, changes in status to "impossible to force synchronization. NSX Edge edge-3 is in poor condition. Try the operation again. The DHCP configuration disappears, but the change seems never commit, because when I browse the bracing or routing section and browse to the DHCP relay page, the original configuration is still there. It is a simple DLR with no configured HA. I have attached the newspapers of DLR tech support in case there is any support curious people out there. Note, vCenter 6.0.0 2741530, ESXi 5.5 Patch 5 reissue 2718055.

  He was just going to remove the DLR and re-create it since it's a lab, but if it wasn't a lab I just want to know why it's a failure.

  After reading more carefully, I apparently missed a step in the upgrade (hosts). I suggest that whoever does the upgrade follows the upgrade guide in pubs located here: 6.2 NSX VMware vSphere Documentation Center

  • Manager of NSX upgrade to 6.2
  • Upgrade of the Cluster controller NSX to 6.2, check the status of cluster control
  • Upgrade the cluster hosts for NSX 6.2
  • 6.2 the NSX border upgrade
  • Guest Introspection to NSX 6.2 update
  • Remove the NSX data security and redeploy

  So I tried a lot of things to work myself back from that. I tried to upgrade the hosts but that didn't fly, esx-vxlan has been blocked to version 5.5.0 - 0.0.2691051. To return to a viable State in the end I had to nuke basically the GSS, logical switches, DLR, TZ, manually uninstall the NSX vibs and unsubscribe manager the NSX to vCenter in the cluster take-off of the State of "uninstall." From there, re - install the 5.5.0 - esx-vxlan 0.0.2983935 (6.2) vibs on the cluster worked OK, and I rebuilt the gateway routing and dashboard. So read before making anywhere near prod. : )

• Impossible to install Dreamweaver CS6 Upgrade! Hard Drive dump - error: failed to check for genuine Adobe software

  Hello

  I am unable to install Dreamweaver CS6 upgrade from versions CS4 Hard Drive DUMP-

  Error: failed installation

  Verification for genuine Adobe software failure

  The product you want to install is not a real software from adobe and seems to be counterfeit.

  .....

  Can someone help me with this question. I installed earlier but DVD, I am unable to find the DVD. I have a copy of full dump DVD network.

  Can someone help me solve the problem.

  Note: I installed Dreamweaver CS4 with serial number number.and try to install the upgrade to cs4.

  Help, please.

  Thank you

  Sin

  It was because I was installing directly from network dump.

  I managed to install and register the software.

  Thank you and my problem is solved.

• Upgrade process works on Snow Leopard, fails on Lion

  So I bought the upgrade to 7.0.1 (PPC version) on my old Mac Book Pro under Snow Leopard, Acrobat X. It installed correctly and accepted the old license on my older machine, which is loaded with the (7.0.1) OS version that supports always code PPC. However, I can't seem to load and accept the license even on the new machine. Because I can not install the old copy from Adobe on my new machine, as Lion can't stand not all PPC apps, the new upgrade fails. I tried to copy the old product more to my new machine just to see if something in the code would allow new software to find, but it fails.  To be clear, it * works * on my old laptop, so old my mother in law license was valid (I was worried she might be licensed to teaching or something). But it will not accept the old license on my new laptop. Does anyone know a solution to this? A kind of workaround? Adobe can provide me with a valid license that does not require this old code, since in the future, I'm having this same problem on newer machines?

  Well, that is a good question. I liked the idea of being able to open and edit PDF files that people could send me. PDF to Word and Excel.

  But for the life of me, I have not needed more than maybe once in recent years. I sold the computer today and let the application on this subject, with the warning that he cannot be upgraded. Overall, I think that Adobe does a good job of customer service, on equal footing with Apple, in my humble OPINION, and my experience is pretty much an outlier. I assume that in the world of statistical analysis, they can afford to have me have an experience like that, because it is unlikely to be repeated much. If it was 2 k $, I could have raised a little more than a line. For example, its legal application of Framemaker, is completely unable to be upgraded at this stage. Thus all writing she did must be retyped so let's revive old books it publishes. Maybe we can send to the India since no one seems to want to support jobs in America more (G). Adobe seems not to want to upgrade funds, and so it goes. In any case, we consider this case closed. If I'm a little irritated, it's a minor issue and not a rant. Detective Conan.

• Upgrade of connections 4.52 access: fails to detect WiFi networks

  
  
  

• Option 'search automatically' upgrade of Windows 7 device driver fails immediately

  I guess I'm really test the features of Windows 7 that I'm running it on a desktop PC's old, slow, and my access (due to overfishing) Internet was cut up to 64 Kbps (8bKps)!

  (And it's fast!  Time to shut-down/re-start is incredibly faster than XP even.)

  Having said that I did several times with Windows XP and Vista, I install Windows, and then plug a USB Wi - Fi dongle and access the Internet through that.  I then right-click on my other devices/Ethernet Controller (of which a driver has not automatically been installed) and select software update of the driver...  It worked without problem - on XP and Vista.

  I did the same with Win7 RC today and am surfing the Internet without problem (if a little slow).  However, the option "Automatically search for an updated driver" takes but ½ second to respond with an error "Windows cannot find driver software for your device".  It does not seem able to verify the (entirely functional, but slow) Internet at all.

  The previous screen said, "Windows will search your computer and the Internet for the latest version of the software driver for your device, UNLESS YOU have DISABLED THIS FEATURE IN the SETTINGS of INSTALLATION of YOUR UNIT."    This is a new installation, and I did not knowingly put such an option (with XP there was once a choice 'always check Internet Internet/check this time only').
   
  It's a matter of waiting period (half a second? or another bug of pre - release?)

  Until someone said, yes I could download the drivers on the C: drive and point the app update driver there, but it is not the purpose of this; also some people may use Win7 dial-up modem access... ;-)

  Thank you!

  See you soon,.
  skris88
  Sydney, Australia

  You don't like when they don't even read your post before responding? Thank you "Support Engineer".

• Upgrading ESX host to day 4 fails with an error "Unable to download .zip bundle offline."

  I run the command update the host ESX below. It fails with an error. I used the same command to update the first host in the same cluster and that worked. Try with others and that she fails.

  esxupdate - bundle = / vmfs/volumes / < data store name > //update-from-esx4.0-4.0_update04.zip updated
  Encountered error BundleDownloadError:
  The error data are:
  URL - vmfs/volumes / < data store name > / update - from -.
  ESX4.0 - 4.0_update04.zip
  LocalFile - / var/cache/esxupdate/bundle7107600307711814965/update-from-
  ESX4.0 - 4.0_update04.zip
  Message - file remote vmfs/volumes / < name of data store > //update-from-
  There is no such thing as ESX4.0 - 4.0_update04.zip.
  Errno - 26
  Description - could not download .zip bundle in offline mode.

  Any ideas?

  Try first to install the fix for shared data and store that if an error occurs, try to install it from a local. As I recall (we work with vSphere 5 for a long time), we were unable to find the reasons why the update for ESX 4 is not installed since the shared data store, it can be at the level of patches, can be a history of the host...

• Lightroom 5.5 on Windows 7 upgrade to 5.7 LR has failed. LR is now missing from my system.

  5.5 Lightroom 64-bit on WIndows 7. Tried to switch to Lightroom 5.7 on the internet. Installer 5.5 removed from my system, but Lightroom version 5.7 has not completed.  Error message States "Error 1335. The file 'Data1.cab' required for this installation is damaged and cannot be used. "Basically I now do not have Lightroom.  How ideas get 5.5 reinstalled or updated to 5.7?

  Hi, you can re - download directly from:

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  If the cab file is corrtpt, you will need to download if it can not be extracted.

  EDIT:

  I forgot to mention also clearly files temporary folder either using using disk cleanup or type folder in the search box, press on enter, select all and delete everything in the directory.