Get the message to replace a new cartridge on C7280
I replaced the black cartridge in my C7280 and when you print a get message to replace the black print cartridge or the printer will use other colors to simulate black. Solutions HP tells me that the (new) cartridge is full (as it should). I removed and re-installed 3 times different.
The driver settings should be changed to reflect the connection has changed. See the page here for more information.
Tags: HP Printers
Similar Questions
-
cartridge problem with photosmart c5550 75; get the message that it is the wrong cartridge
I get the message that the cartridge 75XL isn't the correct cartridge for my C5550 all-in-one printer. We have inserted THREE new 75XL cartridges and the same message.
Hello jjsl,
Welcome to the HP Forums.
I see you have a problem with the printer displays an error of bad ink cartridge.
"Please click on the following link that deals of a ' cartridge Incompatible ' or an 'Impossible cartridge' message on the computer.
If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.
Thanks for your time.
See you soon,.
-
problem cartridge carrier, get the message "problem paper jam.
The cartridge holder snaps from one side to the other, and I get the message "problem paper jam. The problem is new to me. What should I do to solve the problem?
Hi Alan,
The information provided in your post is not sufficient to diagnose your problem. To at least tell you if it's a hardware or software problem, we need to know the name of the printer manufacturer and model number, when exactly meet the problem and what are the symptoms you see.
Usually, a paper jam is caused by a hardware failure in a printer. So, at this point, I also suggest you go to the website of the manufacturer of the printer support and ask for help on their part. This can help you better.
Hope that this information gets you started in the right direction. Please respond with more information about the issue so that we could help you more.
-
I got the message to update my browser, I went on the site and download the latest version of Firefox. I update my plug-ins as well. However, I always get the message that my browser is obsolete. I uninstalled it, reinstalled, without success. Please help me. When I go to help and select about Firefox, I have that I use the latest version: 6.0.2.
Check general.useragent preferences on the topic: config page.
You can open the topic: config page through the address bar just like you open a Web site.Filter: general.useragent
If all general.useragent prefs are "BOLD" (user set) then right-click this pref and select reset.
It would be probably due the FBSMTWB on the end of your useragent that you had added the Fast Browser Search toolbar extension.
-
I use YOSEMITE 10.10.5.
My gmail and Icloud mailboxes (and several smart mailboxes) disappear from the list under "Mailbox store" in the mail. When I try to recreate my gmail account using the "new mailbox...» "(using the sign on the side down and to the left of the screen in Mail +) I get the message"this mailbox already exists. ». What can I do to recover my mailbox?
Restart the Mac and Mail.
-
Relatively new to Vista. Cannot open the pictures, get the message"the Server execution failed «»
Inherited from Dell with Vista laptop. Everything worked OK for several weeks then all of a sudden I can't open images. In other words, images imported from a digital camera, images or attachments in emails or documents scanned files: no open, but after a wait of several minutes, I get the message of the execution of the server failed.
Hello
- What program you use to see all the photos?
Step 1: Check if the problem continues in a new user account.
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
Step 2: If the problem not in the new user account and then you can copy the files from the existing profile by following the steps mentioned in this link:
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile -
I currently have an ad - one that I use frequently on IE8 which does not work on IE9. How can I stop to get a message that I have new updates when IE9 is the only update?
Hi altak38,-What is the add-on which you speak?-Are you referring to Windows Update with Internet Explorer 9 update several times even if it has been installed?If so, follow the steps in the following article to resolve this problem.Post back with more information for the issuance of the add-on - to help you help. -
Whenever I use the computer, I get the message "install new updates"
The most recent 2 Win7 security upgrades/downgrades are on my computer. I checked.
Whenever I use the computer, I get the message "install new updates"
How to set the flag that says I have miserable things?
Thank you
Trevor
Original title: upgrades
Hello Tworg,
Thank you for the update on the question and sorry for a delayed response.
If your Windows Update history shows that .NET Framework 4.5.1 is installed successfully. If troubleshooting says ' registration for the service is missing or corrupt... not fixed "then you can try the methods provided below and see if help."
Method 1
I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways
Method 2
If after performing more high question method persists try to follow the steps described in the following Microsoft article methods.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Registry warning : This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/
Important:
Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Thank you.
-
How to get the message that API to a new version were supported once it is released?
Hi all
For my work, I do my Intigration of based on the API of the latest version. So I need to be reminded, when a new version is available.
How could I get the message that a new version APIs were supported as soon as it is released?
Thank you
Biao
All the ads around API will be done through Code it. Going forward, if/when a new API (or the version of the existing API) is released in the form of GA, it will be announced the Code it along with appropriate documentation.
-
I've updated my billing for new card c, I have my paid October Bill and I always get the message (only 30 days).
Hello
Please see the below help documents:
Applications creative Cloud back in test mode after an update until 2015 for CC
Kind regards
Sheena
-
I bought a new computer. I reinstalled my Photoshop CS6 leave a DVD, but when I entered the serial number I get the message "you are not connected to internet" while I was. I have "pussy" with Naveen on customer support and after 20 minutes he told me to go to the following link and reinstall through it: http://www.adobe.com/sea/downloads/other-downloads.html
This led to the same exact scenario only it took me over 2 hours to download CS6. I then contacted the 'Support Portal online' to ask for additional help. It was 2 days ago and I still have to be contacted and assisted with my problem. Any help or ideas out there?
Here is what is in the file "hosts":
127.0.0.1 localhost
127.0.0.1 activate.adobe.com
127.0.0.1 practivate.adobe.com
127.0.0.1 ereg.adobe.com
127.0.0.1 activate.wip3.adobe.com
127.0.0.1 wip3.adobe.com
127.0.0.1 3dns - 3.adobe.com
127.0.0.1 3dns - 2.adobe.com
127.0.0.1 adobe - dns.adobe.com
127.0.0.1 adobe-dns - 2.adobe.com
127.0.0.1 adobe-dns - 3.adobe.com
127.0.0.1 ereg.wip3.adobe.com
127.0.0.1 activate - sea.adobe.com
127.0.0.1 wwis-dubc1 - vip60.adobe.com
127.0.0.1 activate - sjc0.adobe.com
127.0.0.1 lm.licenses.adobe.com
127.0.0.1 192.150.14.69
127.0.0.1 192.150.18.101
127.0.0.1 192.150.18.108
127.0.0.1 192.150.22.40
127.0.0.1 192.150.8.100
127.0.0.1 192.150.8.118
127.0.0.1 209-34-83 - 73.ood.opsource .net
127.0.0.1 3dns - 1.adobe.com
127.0.0.1 3dns - 4.adobe.com
127.0.0.1 3dns.adobe.com
127.0.0.1 activate - sea.adobe.com
127.0.0.1 activate.wip.adobe.com
127.0.0.1 activate.wip1.adobe.com
127.0.0.1 activate.wip2.adobe.com
127.0.0.1 activate.wip4.adobe.com
127.0.0.1 adobe-dns - 1.adobe.com
127.0.0.1 adobe-dns - 2.adobe.com
127.0.0.1 adobe-dns - 3.adobe.com
127.0.0.1 adobe-dns - 4.adobe.com
127.0.0.1 adobe - dns.adobe.com
127.0.0.1 adobe.activate.com
127.0.0.1 adobeereg.com
127.0.0.1 crl.verisign.net
127.0.0.1 ereg.wip.adobe.com
127.0.0.1 ereg.wip1.adobe.com
127.0.0.1 ereg.wip2.adobe.com
127.0.0.1 ereg.wip3.adobe.com
127.0.0.1 ereg.wip4.adobe.com
127.0.0.1 hl2rcv.adobe.com
127.0.0.1 ood.opsource.net
127.0.0.1 practivate.adobe.ipp
127.0.0.1 practivate.adobe.newoa
127.0.0.1 practivate.adobe.ntp
127.0.0.1 tss-geotrust - crl.thawte.com
127.0.0.1 wip.adobe.com
127.0.0.1 wip1.adobe.com
127.0.0.1 wip2.adobe.com
127.0.0.1 wip3.adobe.com
127.0.0.1 wip4.adobe.com
-
When I launch the new photo or the new HDR feature fusion device, they start for about 10 seconds, but then I get the message error "an unknown error has occurred." What should I do?
There is a problem with these models of Leica cameras providing accurate information in the EXIF data F stop. Photomerge for HDR and Panorama will use this information to "mix" the image files. A solution has been found using an EXIF here Editor:
Re: LR/ACR Pano merger combining Glitch
This may or may not be the source of your problem, but worth investigating. Try to use any other device non-Leica and do a quick test Panorama or HDR and see if you get the same message.
-
Photoshop has moved from old new machine of the toe. Have the cd and serial No. Get the message "memory could not be allocated for activation. Restarted but no change please help
Hello
CS2 and earlier versions are more activated because the activation servers are gone. You must download the CS2 buildreleased for customers who still use the old software or buy a version of Photoshop.
See https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
^ Ani
-
I just bought a new iMac and used the Migration Assistant to transfer my files. At first everything worked, but now a week later, I get the message that the application manager is missing, and I can't Photoshop and InDesign to start. For my personal use, I don't have a need to reach creative Cloud. You have any suggestions for a workaround?
Try installing Adobe application Manager down the link and check
Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager: thank you
-
Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?
Hi PTTimothy
1. what operating system is installed on the computer?
2. you are the administrator of the computer?
I suggest you to check and to provide us with the information about the installed operating system.
Step 1:
You can open the administrator and verify if you can open Windows Easy Transfer correctly.
You can even check if you face the same question in the user account different or new user account. You can create a new user account on your computer, and then check.
Create a new user account-
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountStep 2:
An analysis of the SFC and audit-
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833I hope this helps.
Maybe you are looking for
-
How to disable the "begin with Firefox" web page when starting of Foxfire?
Everytime I open Firefox I get the additional web page 'start Firefox' and don't know how to turn it off. Can you help me?
-
Satellite L305D suddenly stops
* Hello world *.I have a problem with my L305D and maybe you could help me. I was working with my computer to my bed and it suddenly turned off. It is perhaps because the air at the base was not well in traffic. It's extrange because I used to do the
-
Get duplicates of files when generating deployment
I just upgraded from Dev Suite 2009 to 2010. I use the same .tsd file to create a deployment. However, I now get the following error at the start of construction:
-
I can get the mouse works fine, but the keyboard respond only to the Windows key... everything else... nothing... Any ideas? Jim
-
How to make Windows 7 see the list of the user on the login screen, not just the last logged-on user
I am running Windows 7 Professional 64 - bit and have two user accounts on my computer. Problem is that the login screen shows only the last logged user and one "other users" button which allows you to manually enter the username. Is it possible to r