10 to 1511 Windows Update - Lightroom, Illustrator, Dreamweaver... start not - only Photoshop and Acrobat - solution?

Similar Questions

• After that Windows update restarted as requested, by getting only now white screen

  After that Windows update restarted as requested, by getting only now white screen.

  Unable to set up windows

  I was able to boot in safe mode and restore that updated windows.  Then found that the monitor is released.  Again, everything is good

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

  After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required to restart or allow time (about an hour) for wuauclt stop execution and free PC - our aim here is to bundle 2010 via ZEN na enter the beam perfectly - this popup must be eliminated

  Hi Pops1148,

  ·         Is the question not confined with updated Microsoft Office?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article in the Microsoft Knowledge Base and check if it works.

   

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search .

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• Windows Update that affect Internet for Vista Home Premium and Windows 7 connectivity

  Hi, I have two machines in one desktop running Vista Home Premium and a laptop running under windows 7.

  After you apply the Windows updates a few days ago, I was not able to get internet connectivity using my Vista desktop computer.

  I was able to get a wireless on the Windows 7 machine, but to test the router I disabled wireless and tried a wired connection and it did not work.

  If I restore the installation of updates on both machines before the problem no longer exists, but it is clearly not a solution.

  Can someone please help, note that I have established that the router works and all the cables are OK. Thank you.

  I had a very similar experience. See the thread I posted and a solution I found:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/default-gateway-not-available-wired-and-wireless/55131516-C909-45CF-a98a-1e1134e61c26
  I'd be interested to know if the solution worked for you.
  -ONE

• Update error configuration Windows Updates... Do not turn off your computer. This is immediately followed by the default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer.

  OT: Windows Update failure 8.

  I recently re-installed Windows 8 using an old product key once I updated my PC using Windows 7 due to failure to boot Windows Technical Preview. The installation went smoothly, but when installation is finished, he told me that I had installed updates, for the most updated security. I installed them and restarting my PC, he has said configuration Windows Updates... Do not turn off your computer. It is immediately followed by updates default Windows configuration . Restoration of the changes. Do not turn off your computer. It accomplishes this task for like 10-15 minutes and then finally starts. Once my PC starts, this cycle starts again. So far, happened 4 times.

  Could someone please fix this? I want to update to Windows 8.1, but could end up, I'm stuck with Windows 8. (Also, why download from the store disappeared? "I'm not using a RT system).

  Thank you!

  -me15prg9926

  Why I can't update in the store?
  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

• "failed to set up the windows updates. returning from changes. do not turn off your computer.

  Hello

  I get this error "failed to configure windows updates. returning from changes. do not turn off your computer. The computer is a Samsung Ativ tab 5 and I got it for a little over a week.
  I have updated with the SW update
  The results of the troubleshooting online are:

  Problems encountered:

  Recent updates - not fixed installation problems

  Search for missing or corrupted - files detected

  Some security settings are missing or have been modified - fixed

  Registration for the service is missing or corrupt - fixed

  Windows Update error 0 x 80070490 (2014-02-10-t-11_25_11A) - fixed

  I have been through ALL the steps as described in http://support.microsoft.com/kb/949358. I have had no success.
  One thing that bothers me, is in the configuration of the system, I have a service called true vector Internet Monitor (Zone Alarm) and when the value disable as in http://support.microsoft.com/kb/929135, it is the only service still running when you perform a clean restart. I don't know if this affects the Automatic Updates/configuration or not.

  Hello

  Thanks for trying to help. Now my computer seems to be up-to-date.
  I followed your steps but MicrosoftFixit50202.msi did not like "my OS is incompatible. I use windows 8.  I couldn't run this in default or aggressive.
  I did go in Control Panel and disable antivirus and firewall Zone Alarm and reset Windows defender by default.
  I did IE default web browser I have prob changed when I got to the computer.
  I then returned to set up a clean boot and this time I managed to disable the true vector Internet Monitor (Zone Alarm) to run.
  I ran the reset troubleshooting of Windows with the same result as before is to say:
  Recent updates - not fixed installation problems
  Search for missing or corrupted - files detected
  I think I have restarted my computer at this stage and then tried to update again.
  It has not yet, but with the error, I got an error code and a link to help. I don't have not noticed this before. I followed the help and ran about 5 command prompts that have to do with the renaming of files I think.
  Then I tried updating again and this time 38 45 updates succeeded. I then ran the update again and it seemed to work on the other 7 updates.
  Although Windows Update said I was now updated, I was skeptical as when this whole thing started is started when I got the "windows installs updates" and then "failed to configure updates. Returning... etc"then I restarted my computer. At the start, there was no message on try to configure the updates, then, how do I know they are configured and working as it should?
  Thank you.

• I have Adobe Creative Suite 5.5 Design Standard and I can't open Adobe Photoshop. A window pops up that says "could not initialize Photoshop because the preferences file was invalid (it was deleted)." All my other programs, such as Illustrator, are a

  I have Adobe Creative Suite 5.5 Design Standard and I can't open Adobe Photoshop. A window pops up that says "could not initialize Photoshop because the preferences file was invalid (it was deleted)." All my other programs, such as Illustrator, are able to open. Any help is appreciated. Thank you.

  Hello

  Maybe if you check Photoshop on the cover page of the victory 8 and choose Run as administrator from the options bar at the bottom of the page and then do the Ctrl Alt Shift.

  Kind regards

  Sheena

• How can I change the creative cloud of membership that includes only Photoshop and Lightroom?

  How can I change the creative cloud of membership that includes only Photoshop and Lightroom?

  Hello

  Please follow:update or change your plan creative cloud

  For more details; Please contact customer service

  Kind regards

  Sheena

• My creative cloud subscription does not work, photoshop and lightroom always tells me to connect.

  My creative cloud subscription does not work, photoshop and lightroom always tells me to connect.

  The only way to start any program is by activating the 30 day trial.

  After 30 days the software is disabled. Is something wrong with my account?

  Thanks for the help!

  The crew of support for Adobe has solved it for me.

  If anyone else has this problem, try the following.

  1 disconnect from creative cloud.

  2. close all applications from creative cloud of the Task Manager.

  3. delete all the files in the following folders

  C:\ProgramData\Adobe\SLStore

  C:\Program Files (x 86) \Common Files\Adobe\SLCache

  4 start creative cloud and connect.

• I want to go to have all applications and pay for only photoshop and Illustrator, how do I do this?

  How can I change to have all applications to pay only for photoshop and Illustrator?

  1. decide if it's worth since Cloud plans are limited outside plan applications

  If you want only Photoshop and Illustrator, so you will need two plans: photography package ($ 9.99 / month) + single Illustrator App plan ($ 19.99 / mo).

  Contact Adobe to see if there is a cancellation of all applications planning early.

• Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Try to update camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the update I have the last update! Witch, I did not clearly. And my Photoshop have different camera RAW

  Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Try to update camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the update I have the last update! Witch, I did not clearly. And my Photoshop have different camera RAW plug-in. 8.4 the old and the new 8.7. But it does not work. Have removed and reinstalled several times. What is going on? Why can't update bridge to the last version 8.7 or read my raw files from the Canon 7dmk2?

  Try this:

  http://blogs.Adobe.com/Crawlspace/2011/03/keeping-Photoshop-up-to-date.html#NotConnected

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• After Windows updates no clock no start menu.

  OT: incognito.

  After waiting two hours for microsoft to upgrade my computer, which is an absolute pain, I have now no clock, no icons and the start menu does not work.  No, I got a message saying I'm incognito mode. How to get out this please? Thank you. Marnie.

  Hello

  Welcome to the Microsoft community.

  Looks like something was wrong just by doing an update of windows. We will have to return to an earlier point and then repeat the process of updates of Windows.

  What operating system is installed on the computer?

  You can read the following article to find out how to return to a previous point.

  What is system restore?

  http://Windows.Microsoft.com/en-in/Windows/what-is-system-restore#1TC=Windows-7

  Note: Windows updates are available again, make sure that you install them in small bunches.

  Kind regards

• Windows Update necessary Live now does not work

  I signed out of Messenger and obliged to update Windows Live to reconnect. From past experience, it's something I dread and avoid. Now a day later, it is not connect to Windows Live at all, just as I feared. He offered to trouble shoot, but IM just turns and says connection, but does not work. I need a solution.

  You will find support for Windows Live Messenger in these forums: http://windowslivehelp.com/forums.aspx?productid=2 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft