1022N PRINTER WHEN THE PRINT OF NETWORKING CYCLE REPEATS AGAIN AND AGAIN UNTIL THE MANUAL INTERVENTION

Similar Questions

• How can I specify location of the control file when the manual creation of DB?

  DB version: 11.2.0.4

  OS: Oracle Linux 6.6

  The CREATE DATABASE command creates the control file.

  CREATE DATABASE command is executed once you start the instance in NOMOUNT State as shown below.

  SQL > startup nomount pfile=$ORACLE_HOME/dbs/initBRCPRD.ora

  SQL > create database 'BRCPRD '.

  MaxInstances 32

  MAXLOGHISTORY 1

  maxLogFiles 192

  maxlogmembers 3

  ..

  .

  .

  < snipped >

  When you create the database manually, we can define the control_files parameter in the init.ora as below and control file will be created at this location. Right?

  control_files = ("" / u01/oradata/BRCPRD/BRCPRD_control01.ctl","/u01/oradata/BRCPRD/BRCPRD_control02.ctl "")

  When I was generating the DB using DBCA GUI creation scripts, it asks to enter the location of the Online redo logs and control files.

  I entered my desired location. But, I couldn't find CONTROL_FILES parameter in the init.ora file generated the DBCA. This is why I got confused. I think that DBCA is internally somehow. So thought I'd post it here.

  Hi John, OP

  Just checked the init.ora file created by DBCA. Although the parameter CONTROL_FILES is undefined, db_create_file_dest = '+ DATA_DG1' was created. OMF default location is defined by the db_create_file_dest parameter.

  So, I could safely use this script for the manual creation of DB, and during the CREATE DATABASE command execution, oracle will place CONTROL_FILES + DATA_DG1 using the format;

  +DiskGroup/dbname/filetype/filetypetag.file.incarnation

• When I restart my computer stop it crashes and I have to manually turn off

  When I restart my computer, it freezes and won't until you restart.  I have to manually turn the

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Acquire the values only when the digital output is high.

  Hello

  I work with test of transistor, whose door is controlled by the digital release of USB6289, related to BNC2120.

  Test plan:

  Door 1.transistor is enabled for 5seconds, with P0.0 for example

  2. then, everything remains off for 1secondes.

  3.p0.1 is used as digital output to activate the circuit passing him curent through in the opposite direction, P0.1 goes high for 3 seconds, PS: Gate is off.

  4. the same cycle repeats again.

  My question is to store values to the output of the transistor when P0.0 and P0.1 goes high, and these values should not change until my digital outputs respective again go high.

  I can access transistor by continiously read out my power supply values.

  and in the State off I want to read AI0 because at that time, my power supply is off, so that I can activate the circuit to pass the current in the opposite direction.

  Again, my question is to gain the output through power value when P0.0 is high and store them until the transistor turns on.

  and even for P0.1, acquire the value of output through AI0, when P0.1 is high and store it until it goes high again.

  Hopefully, I'm able to explain my problem clearly.

  Please help me.

  Concerning

  Anurag

  Think about what States (object:statemachine and determine when to use sequence Structures) do you want from t0... t(n-1), IF DAQmx generates outputs and/or inputs are absorbed and what needs to happen (event timed out), before move you on to the next 'State '.

  type def 'enum' with your different States:

  • initialize
  • wait (the user initializes times (sec) set for States, or whatever and presses button 'Start')
  • T0 (generate DigOutputs, store acquired data AnalogOutput (string output number) the register shift, before moving to the next State > user 'set time' must elapse (Note: the wait function allows you to control the rate of execution of loop and allow the CPU to respond to external events and system tasks and avoid using wait functions at the same time an operation of software...))
  • ...
  • t(n-1) if ' end (made requirement) "> goto 'stop', ' another (not requirement not)" > goto regardless of 'State '.
  • stop
  • write a text file of data (string).

• My 2008 imac has twice in the last month abandoned auto connect and restore needed. After the first restoation, it was Ok but used the manual connection. On conversion automatic return, he went for a week and has not yet. I'm OK, leaving on the manual

  My 2008 iMac interrupted twice by automatic logon. After the restoration of the first time, a month before, it wasOK on a manual connection until I converted to automatic, I restored again and it's OK, apparently, when the manual connection. Can there be an underlying cause that should I worry about the?

  Download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple Support personnel) of the CSA to provide a snapshot of the system and to help identify the most obvious culprits of software that can adversely affect the performance of Mac.

  

• Network connected to PSUS4 printer goes offline when the PC is shut down...

  I am close to giving up this problem, help would really be appreciated.

  My printer network disconnects when my computer is shut down or sleep. I have a Samsung printer connected to a print server through a router Linksys WAG160N Linksys PSUS4 wireless. Two computers that are hard cables to the router to see and access the printer without problem. I now have a new laptop Sony Vaio (Vista OS) that accesses the router WAG160N wireless. The Vaio connects to the internet OK, but everytime I shut down the PC, the printer is offline and remains offline to the Vaio when I start again.

  If I remove the printer of the Vaio and then 'add printer' again, by selecting the option "Add a network, wireless or bluetooth printer" shows the printer as \\LK90a6dd\p1 network is available. But if I try to connect to it, I have "X Windows cannot connect to the printer". If, instead of this, I choose 'Add a local printer' and select the existing port "\\LK90a6dd\p1 (renderer client-side) ' and the printer driver series Samsung ML1210, the printer is installed, works very well and remains online - until I have stop the Vaio, it is. Then delete the printer, install the printer etc to access the printer again.

  Pleeeaaassseee help...

  Kevin, I owe you a drink. I have added the printer as a local printer (as opposed to network), entering the IP, etc print driver, restarted the computer, and... the printer remained online. Unlike many critics of Vista, I found that it is a reasonable operating system. But maybe it's the glitches like these that give it a bad reputation. Thanks a lot for your help. Really enjoyed.

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• DeskJet 5500: When the printer uses the 57 cartridge?

  I thank very you much for your reply to my last post. Makes perfect sense.

  I'm doing a huge amount of B & W / grey scale printing; I use 56 about two cartridges a week and I reload them successfully for a few tens of cycles each.

  My 57 cartridges also mpty very frequently while I print almost any color - the only color is perhaps a small logo on the page.

  I tried to use the gray filter in Macintosh 10.4.11 system to send a grayscale image to the printer, but the 57 cartridge still empty quickly, even if the printed color is negligible.

  If the page still contains the least amount of color, 57 cartridge automatically prints the whole page, or the cartridge 56 prints black and the 57 print the little bit of color?

  If the 57 prints the whole page if it contains ANY color, is there anything I can do in the impression of New York to get the printer to use the cartridge 56 instead? I took to remove the cartridge 57, but when I put again, the printer goes through the cycle of test page, I want to avoid if I can.

  Thanlk in advance for your help.  I can't tell you how much it means for a user that a knowledgeable HP employee has actually answered questions through this forum. Other companies to let users themselves, often to hang in the wind without usable responses.

  Many use printers, not only HP, so-called 'underprinting' this is the pose of an ink of color on the page before the black ink.  Essentially, it is a primer for the paper.  The color dries quickly and is a base for black ink, allowing it to dry and cure without spreading out on the page.  If you have already printed with the cartridges out of alignment and saw a blue or magenta shadow to your text, you see the underprinting.  That's why, when the same printing black text, the printer uses a color ink.

  This printer is able to print reserve mode, which means it can print with 1 single cartridge installed.  The printing speed may be slower, but it's an easy way to make sure you are not using any color.  For reserve mode, remove the cartridge you want to use.  (Find a hermetic place to store this vertical cartridge with the nozzles pointing down as it is when it is installed in the printer, or it will dry out and become useless!)  To leave the reserve mode, put a good cart in the empty slot.

• HP Office Jet Pro 8610: printer goes offline at rest - requires market power when the new document is pending

  Printer and all functions work fine.  However, lately I sent a doc to print who just sits in the queue.  When I look at the printer by clicking on the tray icon I sde is offline.  So I turn the printer off and back to get it on the network.

  I don't really have any options to change my home network and hope it is some of the printer which will avoid going offline like this, or a faster way so he can go online without turn off and on.

  That dot the 'A' and a passage of "T" by the first response:

  The printer model-

  HP Officejet 8610

  Detailed problem description-

  Printer goes offline without warning.

  New print job is in the queue showing the printer is offline.

  Must be able to market, leading to the resumption of the print job.

  Operating system on the computer (including the revision of the service pack)-

  Windows 8.1

  Method - USB, LAN, Wireless cable connection? -

  Wireless, same problem if DHCP or static 192.168.0.253

  Brand and model of router and modem? -

  BrightHouse Cable router/Modem: Arris, H/W version 6, Firmware 8.0.120

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns?

  None

  If wireless, when the problem occurs, which is blue wireless light on the printer, active, disabled or flashing? -

  WE

• 2 of the 3 computers suddenly can't print on network 6500 e709

  I have three computers and domestic an OfficeJet 6500 e709 on my local network.  Everything worked well for several months until today.  Today, cannot print my two Win7 machines, but my Vista machine can still.

  I went through the center of Solution any sequence of troubleshooting and nothing fixed it.  So I tried my own diagnosis, as follows.

  Because apparently, this forum does not accept attachments, I refer you to the numbered screenshots I posted to http://winter.webfactional.com/HP-problem.doc

  1. printing of each application, I tried, I get "unable to print document."  Most said that the center of Solution is that it is due to "a mistake in the printing system."

  2. starting at the HP Toolbox on the same computer, print a test page.  This method works.  It turns out that there is a connection between the computer and the printer.  The printed test page shows "network status: Ready ', and everything else in the report seems normal.

  3. I go to the window of the printer for this printer, cancel printing failed, view the Properties window and click on "Print Test Page"...

  4.. .and see it immediately.  However, nothing comes of the printer and as little seconds later...

  5... .my screen looks like this.

  ~ Thanks in advance for your help

  ~ Ken

  Thanks, MusicMan ~.

  It happens that my two computers are print again with success.  I don't quite know what solves the problem, and I have no idea why the problem arose in the first place, after a few years a print without problem with this Setup.

  For whatever light it can cast for others (and for me if it happens again), here's the rest of the story:

  After exhausting all the troubleshooting procedures that I could find (including flashes of heat-queue and reboot), I posted my call for help here, turned off my computer and went to bed.  The next day, after having turned all back on again, I noticed that a printer test page appeared in my output tray on the printer, and that he had been sent to one of my computers previously defective, I'll call the "desktop".  As stated in my initial post, printing a test page had been impossible before.  Then, I checked the office by printing a document.  That worked well, and the Office has worked since.

  Then I checked my other computer, the "laptop", and unfortunately it still couldn't print.  Looking for differences between the two configurations, I noticed that the center of complete Solution has been installed on the desktop but not on laptop - laptop has had only the drivers.  So I took to install the Solution Center.  Long story short, the installation process is not well, when the printer is already recognized by Windows and the drivers are already there.  So I finished unistalling the printer and then installed solutions and here Center on the laptop very well printed.

  I hope this helps.

• I lose my Internet on my XP computer when the printer is connected to wireless.

  My new hp6510 wireless printer works fine but my internet connection is lost when the printer is connected to wireless. I use the printer with a linksys E3000 router. The network has a XP computer, a computer with win7 64-bit. I don't have a problem with the computer to win 7, but the xp computer will drop the internet connection and sometimes I can make it work by repair of the connection to the router, but sometimes I need to restart the computer. If I stop the wireless connection and use the USB it works OK. I tried to get help from HP and Linksysm but no help. I would like suggestions.

  Hello

  Please, try the next workaroud and let me know any changes:

  1. In the computer, click the HP Photosmart 6510 .
  2. In the printer Preferences, click the estimated ink levels.
  3. Click on the tab Advanced settings .
  4. Under view alerts, select the 2nd option - Show alerts ink when I print to me.
  5. Click on close, restart the PC and follow for any change.

  Please let me know any progress,

  Shlomi

• Wireless connection works only when the printer is turned off

  my desktop computer requires an adapter wireless for internet connection.  installation of this card was problematic and I discovered I mean it was because of my printer - a kodak esp 6150 desktop, which can work wireless.    I can only connect wirelessly when the printer is off on this computer.  However, two other laptops that do not need a separate wireless adapter are able to connect wireless when the printer is on.  any suggestions?   Thank you.

  Hi Moscotty,

  You can read the following article and check if it helps.

  Windows wireless and wired network connection problems

• My printer is configured to start when the computer turns on. I want to reconfigure it so that it does not turn

  My printer is configured to start when the computer turns on.  I want to reconfigure it so that it won't turn.  I know this is probably a simple change, but I can't find the path anywhere.  Any help?

  I guess you do NOT mean that you have both printer and computer plugged into the same power strip and both are turn on when you turn on the power strip.

  As nearly as I can determine the rather thin material in the Guide for the Dell P713w user, probably have enabled "Eco-Mode" or the mode 'sleep '.  See page 19 of the User Guide (if you don't have it, download it here: http://support.dell.com/support/edocs/systems/PRN_P713w/en/index.htm).

  When this feature is enabled, the printer goes into mode low power when it has been idle for a while.  When the computer is off, the printer is by definition inactive and so will go to low power, shortly after that the computer is turned off.  When the computer is turned on, it detects the presence of the printer and connects to the printer.  Apparently, the printer interprets this string as the "no-idle" and out of his low-power mode, which appears as if it is "turn on."

  In addition, this printer performs an automatic maintenance cycle every week if it is plugged into a power outlet. It will briefly exit Power Saver mode or turn on temporarily if it is disabled.

  At least one of the lights on the printer flashes power on and off when you think that the printer is turned off?  If so, it is in energy saving mode.

  Of course, I may be totally wrong, but it seems to me if you actually turn off the printer by pressing the button on / off on screen, he should not be able to auto (except once / week maintenance cycle).  From the Manual:

  Note: When the printer is turned on, press [power] to switch to the power saving mode. Press and hold [power] for 3 seconds to turn off the printer.

• Whatever it is possible to increase the speed of printing, or is the printing device / network critical connection?

  As the document of the site controller, I mark & print large volumes of documents. Variating in size but that explodes in general strongly when printing.
  Search within Acrobat forums and seems quite common and probably inevitable.

  Tried with/without feeling "like a picture" but did not really much of a difference. Increase in file and the time required for printing on the same.

  However, I think that the internet high speed and or the internal memory of the printing device is too large:

  Internet high speed - also the internal network connections - is a real problem

  Printing for example an original file size 15 MB I've seen explode > 300 MB but the worst is that I can see the indicator of memory on the printer (2.5 GB installed) increase of slow death.

  Takes minutes to load a next page - often with > 50 pages documents printing - multiple copies - really takes hours

  Then of course my colleagues do not appreciate it - local printer however not an option yet.

  
  Assuming that the problem might as well not be Acrobat but also somebody can help me? I'm in contact with suppliers of printing device already to see if a larger internal memory - if possible - would improve situation.

  Next issue will be speed network & internet?  15 Oct status: no improvements made/found yet...

  
  Any help - suggestions welcome!

  The problem is that PDFs are highly compressed, but the need for printers information is just the opposite. Printers are designed on the assumption there is a fast path to the printer - cable USB or network more quickly. There may be problems of speed printer too: a PDF can have be printed a full page of graphics and a slow printer designed mainly for text might crack.

  If printing the image makes no real difference, you have a printer that requires images already...

  If the printer has an available PostScript driver (and the equipment) try this.

  If the printer is capable of printing multiple copies itself (i.e. send once, a lot of printing, rather that send several times), try this.

  If your company can't run to a few hundred dollars for a local printer, then maybe they need to spend tens of thousands on an effective network. (Yes, I know that's not under your control, it's frustrating!)

• Why did you take away the print feature in the window "writing"? When the document window opens, I can't past and print more?

  In earlier versions of ThunderBird could copy items from the web page (for example) and paste it into the 'write' window and then print it directly. Now, I send to myself and then print the document. This is a very poor feature in newer versions of T.B.

  How can we get the longer feature back?

  Now, you said something useful. Press the alt key to display the menu bar. This shortcut has been involved since the beginning from Windows. You can remember it.
  When the menu bar is displayed, select View-Toolbars and relight the toolbars.