10G instance, registration failed on 11.2.0.3 grid

Similar Questions

• WHAT CAN I DO ON MY FIREFOX 3.5 ME REPEAT IT THE CHROME REGISTRATION FAILED

  RPET CHROME REGISTRATION

  This link explains what you need to do - https://support.mozilla.com/kb/Chrome+registration+failed

• cleaning of instance 11i failing on WINDOWS

  Hello
  I am looking for a cleaning instance 11i failing on windows. I can only find for LINUX o/s. Any id document would be appreciated. In fact we have SCREWS on one of our servers, and I want to clone from prod on this server. so I tried to clean it to up everything first and then clone it.
  
  
  Even if I don't need to clean up before clone please suggest me the id of the DOC.
  
  
  Concerning
  Taher

  Taher,

  Should I clean the SCREWS before cloning.

  I think I have already answered this :)

  If you are going to clone from PROD to SCREWS and use the same configuration of the instance of SCREWS, then you will have to do. Otherwise, you worry as long as you have enough space and resources on the nodes of the target.

  Kind regards
  Hussein

• Single Instance Oracle 11.2.0.4.7 with GRID + ASM - AMT headphone attack Poison Fix?

  I'm under a single Instance Oracle 11.2.0.4.7 with GRID + ASM database on Red Hat Enterprise Linux 5.7. I'm trying to fix the infamous TNS Listener Poison attack vulnerability. I tried to implement the COST using this guide (Doc ID 1453883.1) but it doesn't seem to work as it still appears on a scan of the retina. I can't get a remote listener to register to test the vulnerability, and it does not appear in the log listener xml as a registration or denied. Don't know what I'm doing wrong.

  
  

  I added this to my listener.ora:

  SECURE_REGISTER_LISTENER_PROD = (CPI, TCP)

  The Alternative fix to the COST must turn off dynamic registration but I can do it when executing grid with the DSO with only a single instance database?

  How can I fix with my setup?

  You would implement better VNCR on 11.2.0.4:

  for CARS: 1914282.1

  the properties of a single instance: 1600630.1

• SPA112 registration fails?

  Hello!

  My SPA112(1.3.5 004p) fails to register for Vendranges. When you restart the unit everything works and recording work. After a while the departures of re-enrollment to fail and sometimes I get a recording failed before the re-registration started. My SPA112 is behind a router Netgear R7000 SIP ALG disabled. I really tried everything, including the demilitarized zone, Port Forwarding and QOS and NAT deaktivating filter, but it makes no difference. I also tried almost all the options with the SPA112. When the Fax via T.38 works great!

  I already have a detailed log of the process through Slogsrv. This is what happens if the save fails (XXX = personal information):

  SIP_tsClientEventProc(Event: 4)
  tryAltIp_delay() SIP_regTsEventProc(event: 4)
  CC_eventProc(), event: CC_EV_SIG_REGISTER_FAILED (0x3B), cover: 0, rating: 0, par2: (none)
  AUD_ccEventProc: event 59 vid 0 by 0 x 0 par2 0x0
  SLIC_stopRing
  SLIC_stopTone
  [0] RegFail. Try again in 10
  SIP_regTsEventProc(Event: 32)
  SIP_tsClientEventProc(Event: 3)
  [0]-> XXX:5060 (461)
  NOTIFY sip: XXX SIP/2.0

  Via: SIP/2.0/UDP 192.168.2.21:5060; branch = XXX

  From: "XXX" <> [email protected] / * />; tag = XXX

  TO:

  Call ID: [email protected]/ * /.

  CSeq: 87 NOTIFY

  Max-Forwards: 70

  Contact: 'XXX' <> [email protected] / * /: 5060; REF = XXX >

  Event: keep-alive

  User-Agent: Cisco/SPA112-1.3.5(004p)

  Content-Length: 0

  SIP_tsClientEventProc(Event: 3)
  [0]-> XXX:5060 (461)
  NOTIFY sip: XXX SIP/2.0

  Via: SIP/2.0/UDP 192.168.2.21:5060; branch = XXX

  From: "XXX" <> [email protected] / * />; tag = XXX

  TO:

  Call ID: [email protected]/ * /.

  CSeq: 87 NOTIFY

  Max-Forwards: 70

  Contact: 'XXX' <> [email protected] / * /: 5060; REF = XXX >

  Event: keep-alive

  User-Agent: Cisco/SPA112-1.3.5(004p)

  Content-Length: 0

  There is no password.

  The journal begins with the attempt to REGISTER (CSeq: REGISTRY 43236). This request has not been answered by server. He was retried several times until the time-out period. There are also unresponded NOTIFY at the same time (CSeq: 1 NOTIFY).

  Same for the request Cseqs 43238-43263 REGISTRY.

  It is not possible to decide at this level, it's all about network (queries are lost on his way to the PBX / responses are lost on their way to you) or PBX problem (the server simply not responding applications).

  Check the configuration of the values of registry expires and Reg retry Intvl ; They should not be defined for lower value than that requested by your provider or a filter anti-DoS on the PBX may consider your blocked IP. If there is no requirement of your provider, the 60 / 30 seconds should be considered minimums.

  Well, lets go back to save the analysis.

  First succesful REGISTRY is Cseq 43264/43265. NOTIFY Cseq 15 seems to be also reacted well. Right now, everything seems to work. Until the last REGISTRY Cseq 43273 success.

  With the check expire set to 60 that means there were about 10 minutes of successful registration.

  From 43274 REGISTER queries become again until 43279 unresponded. For example about 3 minutes of blackout.

  Application of REGISTRY 43286 is very important. He was answered by "500 Server Error". It may be that there is a question on the PBX. Of course, it may be a transient problem no importance as well.

  The rest of the journal reveals nothing important. successful registration periods are followed by periods of unresponded record and so forth.

  So final conclusion is - network or PBX problem problem.

  I'm no expert of Netgear, so I can't advice how to debug the network problem. You should ask to expert Netgear instead. Note that the 'problem of network' does not mean 'Problem Netgear'. The destination server may not be accessible isue anywhere on the network path.

  Depending on the cause of the PBX, there was only one "Server error". We must not overestimate. But you can ask your administrator to help PBX. Not only because of this error. It can verity REGISTER packets you come to him. So it can help you to verify the network path full of your part to the server (one-way) is broken or not.

  Unfortunately, all the logs of the phone allow not more specific findings...

• Configuring the listener and Instance registration

  Hello

  I was watching one of the cases that we run on a box and I could not understand how the connections are deployed for this particular case, and I hope someone can enlighten us please...

  We run Solaris 5.10 with two houses of installed oracle 10.2.0.4 and 11.1.0.7, a running instance that:

  Oracle: oracle/home / > ps - ef | grep smon

  Oracle 28299 28048 0 08:31:23 pts/7 0:00 grep smon

  24870 2965 Oracle 0 Jul 17?          ora_smon_dbs 45: 03

  TNS_ADMIN to point to ""/var/opt/oracle ": "

  Oracle: oracle/home / > echo $TNS_ADMIN

  / var/opt/oracle

  I had a look at the directory and there is no file tnsnames.ora:

  Oracle: / var/opt/oracle > ls-l

  Total 7

  -rw - r - r - 1 oracle dba 474 14 April 2014 listener.ora

  -rw - r - r - 1 oracle dba 55 7 March 2014 oraInst.loc

  -rw-rw-r - 1 oracle dba 750 19 Jan 10:33 oratab

  
  

  We then looked at the configuration of the listener.ora file, and the SID_NAME does not reference a real SID:

  
  

  listener.ora # Network Configuration file: /var/opt/oracle/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = PLSExtProc)

  (ORACLE_HOME = appl/oracle/10.2.0)

  (= Extproc PROGRAM)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = dbmzsbsdb01.int.un) (PORT = 1521))

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))

  )

  )

  
  

  For awhile, I thought it's ok that we could fix local_listener of the database, but once again if this is the case then I expect to see a file tnsnames.ora with address or list of addresses of listeners specified them then obviously this was not the case and certainly enough, looking at the database local_listener was not established:

  
  

  SYS@dbs> show parameter local_list
  
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  local_listener                       string
  
  

  I also noticed that we use the listener 10g instead of the 11 g listener, and looking at the processes running, it is certainly the case:

  
  

  Oracle: / var/opt/oracle > ps - ef | grep tns

  9384 2965 Oracle 0 Jun 27?          80:37 /appl/oracle/10.2.0/bin/tnslsnr EARPHONE-inherit

  Oracle 2777 26227 0 08:15:50 pts/7 0:00 grep tns

  
  

  I'm a little lost on how this database is same! ??? any ideas on what's happening please?

  
  

  Thank you
  

  
  

  WebLogic even will need connection strings and you should be able to find them.

  The JDBC thin driver does not use tnsnames.ora and fat jdbc driver can use tnsnames.ora but is not necessary.

  JDBC uses the :: syntax.

  The database registers itself with the listener using the service_name parameter in init or - better - spfileSID.ora

  All this is documented, so not too difficult to find for you,

  ---------------

  Sybrand Bakker

  Senior Oracle DBA

• registration fails, no explanation why

  Recording without success

  Was a problem when trying to send information on the Internet.

  Gee, this is an informative error, people. There is nothing wrong with my Internet connection.

  It was pretty good doggone program download and installed with the serial number I

  provided on the first try, but three attempts to save it failed; the first time and after five minutes of fake "try."

  Any ideas? Adobe thoughtfully CLOSED my case before to help me solve the problem. Not.

  Name and version of the product?

  If you are referring to older Apps, follow the procedure below :

  > Disconnect your Internet connection by disconnecting the Ethernet cable or turn-off WiFi.

  > Then restart the Adobe application.
  > When you get registration pop up, select "never register.", then connect you to the calculate with Internet connection and check. "

• Shared services registration failing when configuring EPMA 11.1.1.3

  Hi all, I am currently woking on essbase and any knowledge of planning so tried to update my knowledge. I installed epma 11.1.1.3 on workstation to VMware windows 2003 that I have windows 7 laptop. oracle 10g installation created a user/database (epma) patterns (sm, ms) is trying to set up the foundation, essbase, planning and reporting and analysis services. the configuration database and register with shared services has failed. I'm doing something wrong. I followed some configuration documents that are documented with screenshots are still unsure as to what I do. Please advice on how to avoid these failures.
  
  Here are the results of the validation of the configuration.
  
  Thanks in advance.
  Srinivas
  
  Oracle EPM system
  Diagnostic reports
  Generated 03/03/12 23:05
  Running on validation srinivas
  Validation tool Info: 11.1.1.3.0 drop 9-0 build 3129 2009-07-16 13:24
  Name of the operating system: Windows 2003
  Operating system version: 5.2
  
  
  Status Service Test Description duration of test
  Foundation of Hyperion
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  relationalStorageConfiguration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  OPN FAILED: OpenLDAP Check if global roles number of not less than 16
  Error: $item.exception.localizedMessage
  Recommended action: 0 s
  OPN FAILED: connection OpenLDAP OpenLDAP
  Error: srinivas:28089
  Recommended action: open Start LDAP 1s
  The ERP Integrator
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Essbase / customer
  WR PAST: Windows registry check if EQD excel addin registered for Essbase Client 0 s
  Essbase / Essbase
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  EAS FAILED: Essbase Server start the Essbase server check using the Maxl command
  Error: Result: unable to connect to Essbase server by using the command MAXL. Please check the essbase server is running.
  Recommended action: check Essbase server is started. 2 1
  SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
  Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
  Recommended action: make sure that the external auditor is working. 7 s
  Essbase / Essbase Administration Services
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Essbase / service provider
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  Essbase / Smart Search
  CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
  Essbase / Studio
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Managing the quality of financial data
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Foundation / calculation Manager
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Foundation / Performance Management architect
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Foundation / workspace
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  FROM HTTP: Http is [C:\Hyperion\common\httpServers\Apache\2.0.59\bin\installhyperionapacheservice.err] s 0 empty file
  [FROM HTTP: string check Http [LoadModule jk_module modules/mod_jk] file[C:\Hyperion\common\httpServers\Apache\2.0.59\conf\httpd.conf] 0 s
  PAST REG: Register all links are present in the registry. 2 1
  Performance dashboard
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Planning
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  applicationServerDeployment: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Profitability and cost management
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Strategic Finance
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Financial management
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Reporting and analysis
  CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
  SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
  Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
  Recommended action: make sure that the external auditor is working. 1 1
  
  Test start time: 23:05:18
  End of test time: 23:05:40
  Test duration: 21s

  Hi Srinivas,

  I suggest you to do separately from the configuration of the different components. First you configure shared services and continue with the other components.
  And also using the same relational database for all components is not recommended.
  Doing so will make you empty the things about it you give and would be easy to fix too.
  And I'm sckeptic on your database connection.

  Few things to check before you start the configuration.
  1. check are you can connect to the database on firewall problems.
  2 and also check the timeout values defined for the database.

  Kind regards
  Pradeep

• Adding the instances dynamically fail on FormServer

  Dear all,

  I am facing a problem when adding a subform instances dynamically by solving an XML hierarchy is different from that of hierarchy PDF.

  
  Question: Instances of a subform added fails in FormServer (working on the local machine) when you try to resolve XML which is different from

  Hierarchy of nodes PDF.

  Adobe Reader Version : 9.0

  Adobe LiveCycle Designer : 7.0

  The code written to : initialization of the Parent of the subform that must be repeated.

  Script used is:

  var FundDataArrayNode = "xfa.record.FundDataArray";

  If (xfa.resolveNode (FundDataArrayNode)! = null)

  {

  for (i = 0; I < 10; i ++)

  {

  Add subform instances 'x '.

  }

  }

  XML contains the following data:

  " < WIP xmlns:ns0 = ' http://schemas.ml.com/CCP/standards/common/WIP_v2_0/ ">

  < FundDataArray >

  < / FundDataArray >

  < / work in PROGRESS >

  I am trying to solve for the node of "FundDataArray" and if it is available I am trying to add 10 instances using the 'for' loop It works fine on the Local computer, but not on the form server.

  If I can't solve for the node and add instances by using simple loop 'for', it works fine on the local computer, as well as on server.

  As I am not able to join PDF, let me know which mail ID I can send the PDF and XML.

  Please advice.

  Try like this...

  Use JavaScript as a language of...

  If (xfa.resolveNode ("$record. FundDataArray') .value! = null)

  {

  for (i = 0; I<>

  {

  Add subform instances 'x '.

  }

  }

  Thank you

  Srini

• 10g RAC installation fails...

  Hi all
  
  I'm new to RAC installation.while make installation of 2node cluster, until windows assisstants configuration that everything went well. in CA in the State Audit, the oracle clusterware configuration assistant failed with the following log...
  
  
  
  INFO: Starting installation on the nodes 'server004 '.
  INFO: Save the inventory Cluster
  INFO: By running the command ' C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui\bin\setup.exe - jreLoc C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\jre\1.4.2 - paramFile C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui/clusterparam.ini-silencieux - ignoreSysPrereqs - attachHome - noClusterEnabled ORACLE_HOME=C:\oracle\product\10.2.0\crs ORACLE_HOME_NAME = OraCr10g_home CLUSTER_NODES = server003 , CRS server004 = true 'INVENTORY_LOCATION = C:\Program Files\Oracle\Inventory' LOCAL_NODE = server004 - remoteInvocation - invokingNodeName server003 - logFilePath "C:\Program Files\Oracle\Inventory/logs" - 2010-05-18_11-41-42 AM timestamp' on the nodes of 'server004 '.
  NEWS: Removal service "OracleOUIOraCr10g_homeService" nodes "server004."
  INFO: Creating service 'OracleOUIOraCr10g_homeService' node 'server004 '.
  NEWS: Starts the service 'OracleOUIOraCr10g_homeService' node 'server004 '.
  NEWS: Stop service OracleOUIOraCr10g_homeService on server004 of knots.
  NEWS: Removal service "OracleOUIOraCr10g_homeService" nodes "server004."
  NEWS: cf session retrieved for key: OraCr10g_home oracle.crs
  NEWS: cf session retrieved for key: OraCr10g_home oracle.crs
  NEWS: cf session retrieved for key: OraCr10g_home oracle.crs
  NEWS: cf session retrieved for key: OraCr10g_home oracle.crs
  NEWS: cf session retrieved for key: OraCr10g_home oracle.crs
  NEWS: cf session retrieved for key: OraCr10g_home oracle.crs
  NEWS: FIRST RUN_RECOMMENDED_TOOLS set to false
  NEWS: No. recommended Tools5
  NEWS: plugin-list is created
  INFO: pluginlist is updated for: Oracle Clusterware current size: 1
  INFO: No ExitOnly tools in this session: 0
  NEWS: cf session to run a hashcode: 1040982
  INFO: detached list tool prepares model fo: Oracle Clusterware
  INFO: cfsession hashcode for output only tools: 1040982
  INFO: hash for the action code: 17596838
  INFO: No ExitOnly tools: 0
  NEWS: economy out only tools...
  INFO: no tool only seconded in this session
  INFO: output only tools are created in a single installation
  INFO: No. sets of tools to be run: 1
  INFO: page ca look: true
  INFO: tools to run exitonly spent: 0
  INFO: Begin to run the configuration wizards
  INFO: Command = C:\WINDOWS\system32\cmd/c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
  
  Step 1: check the status of the cluster CRS
  Step 2: Creating directories (C:\oracle\product\10.2.0\crs)
  Step 3: configuration of OCR repository
  OCR Upgrade failed with (-1073741819)
  
  Command = C:\WINDOWS\system32\cmd/c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat failed
  
  INFO: Setup Wizard "Wizard of Configuration Oracle Clusterware" failed
  -----------------------------------------------------------------------------
  From OUICA *.
  The Oracle Home C:\oracle\product\10.2.0\crs value
  Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml under the directory files will be processed
  INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, has been omitted or were cancelled. This file can be used to run these wizards of configuration outside of YES. Note that you may need to update this script with passwords (as applicable) before running the same thing.
  -----------------------------------------------------------------------------
  GRAVE: YES-25031: some of the wizards of configuration failed. It is strongly recommended that you repeat configuration at this time assistants. Not run successfully the Wizards '' recommended '' means that your system is not properly configured.
  1 check the details on the screen Configuration Wizard panel to see errors resulting in chess.
  2 fix the errors causing these failures.
  3. Select the wizards failed and click 'Retry' to retry them.
  INFO: User selected: Yes/OK
  
  Have 1 GB of RAM in the nodes.
  
  could someone help me solve this problem?
  
  Thank you
  
  Deruy
  
  Edited by: user4487322 may 18, 2010 01:46

  It is a problem in 10g. You must manually call the VIPCA utility and have the address set by you.

  It is very common that people just click OK without going through the operating system and run the VIPCA config. Deputy, so at the point where the YES program ends VIP addresses still aren't reported, causing this problem appears.

  ~ Madrid

  http://hrivera99.blogspot.com

• MDM registration fails with "out of find CRL, unknown CA.

  I'll put up a few classes worth of iPads for a local school and a few problems getting iPads recorded on the Apple MDM server.

  We have a mac mini to the latest version of El Capitan and iPads to connect by using the domain name (theserver.mdm.theschool.edu).  The domain is registered and administered by a third party and they run the main site (theschool.edu), but they passed on to all applications on the subnet of mdm (i.e. *. mdm.theschool.edu to our LAN (ASM was able to communicate with our server using theserver.mdm.theschool.edu, so we know that it works). nslookup and the ping from inside the local network is theserver.mdm.theschool.edu without problem.)

  Because we cannot mess with the primary DNS for this project, I use the DNS on the mac mini and send all our subnet of mdm requests to this server.  All iPads use this server as a DNS server address and have no trouble accessing it. Any unknown applications are transferred to the primary DNS server.

  I created a domain in Open Directory for our local subnet (mdm.theschool.edu) and the captain the mini mac.

  When I try to save an iPad via the web site server, it fails and I only see it in the newspaper:
  Jul 22 15:23:21 salome xscertd-helper [2261]: could not find the CRL, unknown CA: F9D65C0B-42E7-4EBE-96A1-BB5F2EC0EF2C

  I use free free certificates.  CA in the message changes each time.

  I can download the certificate that I use for the iPad with success, just not register actually unit. I had a quick glance at all the certificates that I can see and they have all what looks like the correct CA in them.

  Where can I find more diagnostic information?  Why CA continue to change (corruption, something caused random data not specified...)?

  I could be wrong, but as I KNOW MDM will not work with free certificates, you need to get a certificate of push Apple related to one identifier Apple. You don't mention in your question.

  In addition, according to:

  https://help.Apple.com/ServerApp/Mac/5.1.5/#/apd05B9B761-D390-4A75-9251-E9AD29A6 1D0C

  "To use the Profile Manager as a service of mobile device management (MDM), OS X Server must have a static network address and a fully qualified domain name and may not be on an isolated network."

  C.

• NB200 - 10G - recovery process failed - Setenv.ini question

  Hello, I have a problem with my netbook.
  I want to recovery my windows with operating system windows xp delivered in my hard drive, but this reconstruction process failed.
  On the recovery screen GUI (RecoGUI) displays a message box and a message:

  "ERROR: Setenv file D:\Setenv.ini or X:\tools\Setenv.ini not found!

  wrote about this.

  so I tried to change the Mode of the controller SATA in the BIOS from AHCI to compatibility.
  But this change does'nt have effect.
  This error message always appears when I tried recovery and I don't have a recovery disk.

  What should I do?
  Thank you

  This s pity companion
  Seems that something was wrong with the partition of HARD drive and the HARD drive recovery procedure.
  From my point of view there is no much to do

  If the recovery of HARD drive does not work, then you can install the operating system only using a disc.
  Either you use a Toshiba Recovery disk or a Windows shared drive.

  Recovery disc can be ordered here:
  https://backupmedia.Toshiba.EU/landing.aspx

  By the way; Need a CD/DVD USB drive in order to install the operating system from the disk.

• I CAN'T GET THE WINDOWS MEDIA PLAYER! Self-registration FAILED with Visual Studio 2010!

  Hello world!

  I just bought the Visual Studio 2010 Professional Edition, registered and everything. I have the Windows XP operating system and I wanted to do a media player using WindowsMediaPlayer, I. I saw on YouTube that all you had to do was simply right click, add click on choose the elements and go to components and click on WindowsMediaPlayer. I couldn't find that if I used Google and found that he had to go in System32, then click wmp.dll. After I did, he said

  "Self-registration impossible C:\WINDOWS\system32\wmp.dll.

  I want this thing so BADLY!

  Any help would be VERY VERY LARGELY APPRECIATED!

  Thank you

  TheElevatorMaster

  Hello
   
  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public to MSDN development.
  Please post your question in the MSDN Visual Studio category. 
   
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ole32.dll registration fails

  Hi I need to register ole32.dll but it fails.  I get the following message:

  The module "ole32.dll" was loaded but the call to DLLRegisterServer failed with error code 0 x 8007005.

  I made in the framework of trying to solve a problem I have with MSOffice 2007 and an error message im done with this.  Until I have resolve the error im getting with register the ole32.dll I can't move foreword with the error of the Office.

  I've worked with office news groups that experts cannot help me more.  I can't register the ole32.dll, it would seem that it is a problem of vista originally my problem at the office.

  kind regards Gilly vista ultimate 64 bit sp2

  Hi Gilly,

  High and open command prompt. To do this, click Start, click programs, accessories principally made, right click Guest and then click run as administrator.

  Now, save the file Ole32.dll using the Regsvr32.exe. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Media Center to demand registration fails intermittently

  configuration:
  Vista Home premium 64-bit
  950 Hauppauge usb tv tuner, an ATSC signal

  Scheduled recordings work fine for a few days and then stop working. First sign of distress is a notification by the State which media center units failed to record a scheduled recording. Then if I open media center and you try to watch live tv, it is said that the tv tuner is disconnected. Shows Device Manager the device is connected and turned on. I can only restore functionality by disconnecting the tuner tv by the USB port, restart windows, and then plug the device back in. Things work fine again for a few days, but the problem is recurring. I tested the device on all USB ports available (rear, before and on the powered usb hub). I have updated all drivers for the tuner tv, graphics, sound, windows updates, etc.

  Problems and solutions does not have this problem. The ususally computer restarts, presumably after a blue screen, because I can tell that the computer has been restarted. The records are scheduled to start so I'm not here to actually see it happen.

  How can I determine the cause of these failures?

  Hi spm2004

  First check a updated driver for tuner card and also install all the updated optional equipment.

  Since you are facing so many problems with the system, you can try to run a SFC (System File Checker) scan to check if a system file is missing or damaged and check what is happening.

  (1) close all open windows.

  2) click on the Start, click on ' all programs"and click on"Accessories ". " "»»

  (3) with the button "command prompt" and click on ""run as Administrator ". "

  (4) in the window "Administrator: command prompt", type "sfc/scannow" (without the quotes) and press ENTER.

  (5) restart the computer after completing the analysis of the SFC.

  For more information, you can consult the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.