110 - 412na: input device error

Similar Questions

• I am trying to download images from a compact flash player map, but every time my computer shows i/o device error. What does that mean?

  I am trying to download pictures from a card compact flash player map, but every time my computer shows i/o device error. What does that mean?

  Hi Richard,

  1. what version of Windows you are using on the computer?

  2. have you checked if the problem persists in a different USB port and in another computer?

  3 - is the card compact flash not detected in Device Manager?

  A Secure Digital or SD memory card is a device of small portable storage usually used on a digital camera or camcorder, cell phone, or computer system. When you use the card, you may sometimes experience an IO error. The term "i/o" is refers to an input/output error and may involve the SD itself card or the card reader you are using.

  Try these methods:

  Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Eject the SD card in the card reader and check the writing on the side protection tab. This tab should be in the up position; otherwise, you will not be able to save all data on the card. Also check the connection between the computer and the SD card reader. If the card reader is not properly connected to the computer, you will receive error messages when you try to use the SD card or your computer does not recognize the card.

  Response with more information to help you. Back to us for any problem related to Windows. We will be happy to help you.

• F\ is not acessable due i\o device error

  F\ drive is not acessiable due to the i\o device error

  Hello

  • What version of Windows?
  • What is this disk F means? It is an external hard drive, Flash drive or the DVD drive?
  • Were you able to access the same drive?
  • Did you recent hardware or changes to the software to the computer before the show?

  An I/o device error occurs when Windows XP or Vista, is not able to perform an operation of input/output (such as reading or copying the data) when it tries to access a drive or disk.

  Causes of an i/o device error: I/O error problems could occur for one of the following reasons:

  • Windows tries to use a transfer mode that can not use the hardware device.
  • The device you are trying to access is damaged or defective.
  • Hardware drivers are damaged or incompatible.
  • There is a connection problem, such as a bad cable.
  • The disk CD or DVD that you are trying to access is damaged or dirty.

  Try the steps mentioned below:

  (a) restart your computer and then try to access the drive or disc again.

  (b) if it is an external drive then wipe the drive and connect to the different port and then check.

  (c) If you have another computer available, try to access the data on the drive or disc with the other PC to confirm that the drive or the drive is not damaged.

  (d) If you do not have another computer available, try a different disk to ensure that the problem is with the computer and not with the original disc.

  If the problem is resolved and you get is more the error message, the issue is resolved. If the problem persists, post your reply with more information.

  It will be useful.

• Registering a dll file to start the service HID Input Device

  Hello

  I would like to register the dll located in my System32 hidserv.dll. However, when you enter the command 'regsvr32 hidserv.dll' I have an error message indicating that: "hidserv.dll was loaded, but the DllRegisterServer entry point was not found. This file cannot be saved. "

  How I then save it, knowing that I checked that this file is not corrupt?

  I need to register this dll in order to start the "HID Input Device" who stubbornly refuses to start despite an integrity check in the registry.

  The system event viewer specifies that:

  "HID Input Service service terminated with the error:
  Error 126: The specified module is not found. "

  I already tried to extract hidserv.dll, mouclass.sys & mouhid.sys sp2 and sp3 even to put them in the C:\Windows\System32 directory, but I had no change.

  The files I have place in my SYSTEM32 have the following version:
  Hidserv.dll: 5.1.2600.5512
  Mouclass.sys: 5.1.2600.5512
  mouhid.sys: 5.1.2600.0

  but the service still does not start even after rebooting. The 126 error continues. Is there other files to extract / expansion?

  I checked the integrity of all stakeholders key in the registry (for example, to have the "ServiceDll" key whose value is "% systemroot%\System32\hidserv.dll" in the settings of the service HIDserv ControlSets), but nothing more.

  I give you an export of the current CS:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ]
  "DependOnService" = hex (7): 52, 00, 70, 00, 63, 00, 53, 00, 73, 00, 00, 00, 00, 00
  "Description"="allows generic inbound access to the user interface devices, which activate and maintain the use of the active buttons preset on the keyboard, remote controls, and other multimedia devices. If this service is stopped, the normal controlled active buttons not of will operate this service don't. If this service is disabled, any services dependent on explicitly will not start. »
  "DisplayName"="HIDDEN Service entry.
  "ErrorControl" = DWORD: 00000001
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  "LocalSystem ObjectName"=""
  "Start" =: 00000002
  'Type' = dword:00000020

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" = hex (2): 20, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Enum]
  "0" = "Root\\LEGACY_HIDSERV\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  By analyzing the Observer newspaper of events more deeply, I could identify the date on which took place the first concern. The problem is dated, 18/08/2010 at 11:59:17 (it sticks with the conclusion of the first concern of losing control of my volume on my Logitech G110 keyboard also control buttons). I don't remember having a particular to this date on my system change, except perhaps a Windows Update automatically.
  I could not try a system restore, knowing that the RP oldest I have is dated 20/08, so downstream of the original problem.

  I ran a File Checker sfc/scannow system with my Windows XP Pro SP3 (current version of my system) installation cd. I've been thinking about it since a cd to install Windows XP Pro SP2, but better is worth twice more than once. I also realized a CheckDisk, but these two operations have not changed the problem.

  You will find export of address following my diary of events on the system.

  I have completed all of the tasks (start, replacement dll, see registry, SFC,...) while logged on sessions 'standard user', 'administrator' and even as a 'SYSTEM' (NT Authority), but in none of these configurations, it was possible for me to start this service. If I come to you, is precisely to avoid passing through a repair using the cd which would have made me lose a lot of time. I don't usually do the use of support services, in general the case has already been handled and the response or similar cases are on the web. But now I feel like in front of a technical impasse. I appeal to your specific skills to do what is necessary for good service restarting without using a remedy that eventually a reinstallation of the system.

  It you want to check my configuration, you can find it here.
  If you need more information, feel free to contact me. I would be happy to answer them.

  Until then, thank you very much. Kind regards.

  Arnaud TIERANT.

  First of all, the hidserv.dll is not a DLL that can be recorded.  You can try all day long, but it will not be because he is not on the list of DLLs that will be or must be registered.  There is a list, and which is not on it.  (well thought of).

  Your problem is in the registry with the HidServ, section ServiceDLL parameter.

  You have a space left in the key ServiceDLL.  In regedit, it should look like this:

  %SystemRoot%\System32\hidserv.dll

  Yours probably looks like this in regedit:

  %SystemRoot%\System32\hidserv.dll

  See the space left?  I don't know how it got that way (perhaps something that was installed for these humans), but I know that if I put a space in front of me and restart my system, HID service not start and give me an error 126 as you describe.  He has no idea about the problem in the log events.

  With space on the left, the specified module really not found because there is no such thing as the path (with the space to the left).

  Your registry export reveals this problem.

  Yours looks like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 20, 00, 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  It should look like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  In your, you can see I have stuff in bold print on the front of the chain: 20.00...  In hexadecimal, is a space and a null value (null value is correct).  You must use regedit to get rid of this leading space (20 hex), and don't forget that, in the settings section, the first character of the value ServiceDLL is the % sign (which is a hexagon of 25).

  You can, of course, just change the string, delete everything that is there, and retype the value if it looks like this without spaces attack/crawling:

  %SystemRoot%\System32\hidserv.dll

  The HID Service will not start if you come to make the changes and try to start the service.  After making your changes, you need to restart, you can check it out, and then start the service HID.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Cannot open the input device. Another program, it may have already. RC = - 10 (Ventrilo)

  
  

  • Duuring the time I downloaded Ventrilo, I was getting rather annoyed with it. I can't speak to members of my Guild felloe that this error message keeps popping up, to open the input device. Another program, it may have already. RC = - 10... Ive asked them suggestions, but all I received didn't come clear to solve the problem...

  I use a headset called Gembird AP-870. I searched the web, trying to find a solution but have not found anything that can help me... If anyone knows how I can solve this problem I will be grateful...

  It is located directly above the ORB start and said in fact start search inside.

  If you can't find it always, hit the Windows key and R at the same time to open run and type msconfig.exe, and then enter.  As you will get to the same place.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• need a pc input device driver

  Hello, I am on Windows 7 and does not have a driver for device entry for PC, I bought a program that detects all the drivers, but he can't find one for this one! Can someone please advise how I can get this driver? I have a new sound card, but still he did not make a difference.

  Any suggestions would be much appreciated

  See you soon

  Tori

  "pc input device" could mean anything, when exactly you see an error message?

  Driver finder so paid or free programs should not be used as they can and are causing problems.

  Drivers for your PC are available for free since your assumption of the manufacturers of PC, or for a generic desktop by the creators of individual materials

• Opening Don t see a camera as input device

  I like to transfer pictures from my camera, a V - LUX (Type114) of Leica at the opening, but the software has not shown this input device

  Jurgen,

  What have you already tried?

  The camera shows if you open the import in the opening panel manually by entering ⌘I?

  You try to read directly from the card or is the camera connected by a USB cable?

  Try if the card can be read, if you use the card reader.

  The device is fully charged or connected to a power source?  Is the camera in the right mode to connect to the computer?

  Other applications see the camera?  Photos for Mac? Image capture?

  Have you tried, if the opening is to see the camera, if yo use another card?  Any camera sees opening?

• I/o device error series Equium

  I have a satellite phone and when I put the DVD in the drive I get:

  d: / is not accessible
  and
  This request could not be performed because of an I / O DEVICE ERROR.

  Please someone can help, I had a lot of problems with this laptop and wondered whether or not I take repairs... yet again!

  Hello

  This error is displayed because the drive is not able to read DVD media.
  It would be interesting to know if this happens with all DVDs

  In any case, I think you should try it first;

  Access to the registry, and then remove the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this short intervention, restart the laptop.

  If this doesn't help then the chances are that the player could malfunction
  In this case, you should ask the technician to phone for help!

  Good luck

• Satellite P30-145-IO device error

  My problem is with the so-called player super multi, when I insert a DVD - RW I get i/o device error, I tried other brands and CD also with the same result.
  It works very well with the 'true' DVD but not the accessible variety in writing.
  I tried using Microsofts IE. the whole thing of IDE ATA/ATAPI controllers with nothing does not.
  Can someone help with this frustrating dilemma?

  [Edited by: admin]

  Hello

  As far as I know there is no one-size-fits-all solution for this type of problem. Try to remove the device from Device Manager, and then restart the device.

  You have this problem for a long time?

• HP Jet 7, 8.1 Win Win 10 update and Bluetooth "devices errors."

  I did the upgrade from 8.1 to win to win 10.  So far, I've noticed all my devices Bluetooth "devices errors."  I have deleated all BT devices and tried to charge the BT device to my soundblaster roar 2 and a simple generic keyboard and I got the same results. I have tried reconnecting with other devices.  Did someone went down this path? HP, Microsoft, suppliers... has a driver upates?  I have not read on win 10?  Device Manager will be my frined here, deleting and reloading BT associated drivers?  What do you say?

  Hi, Yes, my bluetooth mouse works fine on my Stream with 10 Windows 7, device drivers are available from hp.com.  You could try to reload the driver bluetooth of Windows 10.

• Tecra A4 PTA40E: DVD rom IO device error

  I have the portable Tectra A4 PTA40E. When I insert a disc into the DVD Roam driveand try opening. I get an ie error message is D:\is not accessible. The request could not be performed because of an i/o device error.

  I reinstalled the driver, dosent them work again.
  Help, please
  Thank you very much

  Hello

  It looks a bit like a hardware problem but first try them all these common advice;

  First try to remove the drive from the Device Manager and restart the laptop. Windows should recognize the CD/DVD drive and re-install the drivers.

  If this does not help, you must check this document knowledge of MS;
  You receive an I/O device error message when you try to use your CD-ROM drive in Windows XP
  http://support.Microsoft.com/?kbid=891894

  According to this MS document, you should try to change the Transfer Mode to DMA to PIO and back.

  I hope it helps

  PS: this forum thread might be useful:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868

• Qosmio G20: device error - "no audio device found".

  Audio device error showed "no audio device has been detected" and seems to have lost the link to the audio device. Any advice on how to restore this lost link please

  Sorry, but your description of the problem is really more than ridiculous. Explain what is exactly the problem, and when this error message occurs.

  Do you use external device or what?

• Qosmio G20 - DVD RAM i/o device error

  Hello

  I need help.
  My dvd ram driver do not work dvd.

  When I run the dvd he told me "the requested could not be performed because of an i/o device error" and I don't know how to fix it.

  Try to remove the optical drive from Device Manager, and then restart your laptop.
  The reader should be recognized again and correctly installed.

  Please try to test again the feature with CD or DVD media.

  You can use ODD as boot device?
  ODD is displayed correctly in Windows Explorer?

• On Satellite A100 DVD drive is not accessible - i/o device error

  I have a Satellite A100 - 01 G, but the CD/DVD drive is not accessible when I try to open the files on a disc. When I try to run a disc I ge "the request cannot be performed an i/o device error.
  When I click on the drive icon it says that the application is not found.

  Help, please.
  Thank you

  Hello

  Have you tried to update the CD/DVD drive?
  You could go to the Device Manager and could remove the reader of CD/DVD from the list of devices.
  Then, you must restart the laptop.
  After restarting again the Windows operating system will recognize the new device as the CD/DVD drive and will initialize and reinstall the driver.

  Then try using the new CD/DVD drive

• Satellite A110: D:\ is not accessible - i/o device error

  im getting a message saying d:\ is not accessible and then below it says the request cannot be performed because of an i/o device error can someone help me with this please

  Post edited by: willvila

  Hello, William

  I'm not 100% sure but I assume that you have problems with ODD (optical disc drive)? Am I right about that?