1209: loading paper HP inkjet all-in-one

Similar Questions

• try to load my kodak 5250 all in one disc but keeps showing 0x00000002

  Device

  try to load my kodak 5250 all in one disc but keeps showing 0 x 00000002 someone can help

  Hi barryhealey,

  You can check out the support of Kodak at following link and check if it helps to download the software:

  http://support.en.kodak.com/app/answers/detail/A_ID/36460/selected/true

  You can also check out the support of Kodak at following link:

  http://support.en.kodak.com/app/answers/detail/A_ID/36460/selected/true

  For more information, you can check the link:

  Find and install printer drivers

  Hope this information is helpful

• Long-term storage of inkjet all-in-one (F4480)

  Is there a good way to prepare for storing ink jet printers long-term (> 1 year) so that the jets get clogged?

  We have a F4480 deskjet all-in-one that has not been used in several months.  As far as I know it still works fine.  It has been stored in the original box & delivery packaging for 3 months.  We hope it won't be necessary for 1-2 years.  We had 2 former HP hoof to the top after a long period without use.  I said that they should be tested every month or two.  Do you need >

  This model integrates print on ink supplies heads, so in the worst case, you'll just need to replace the cartridges.  I think after a year or two ink supplies will probably dried out or clogged.   When you restore the printer to the service, you may be able to run up to three cycles of cleaning of the Toolbox.  Is there is an impression, but it is scratched or one or more colors are missing, then soak the nozzles of the cartridges down in about 1 "of very hot water for 10 minutes can recover the cartridges.

  The best plan would be to simply use the cartridges before long-term storage and then store the low or empty cartridges in the printer.

  For best results, store the printer with cartridges installed.  Be sure to turn off the printer to its power switch and wait for the cartridges to Park properly before removing the power.  Store the printer in a place cool and away from drafts, pets and other potential hazards.  Make sure that the printer is stored standing in its normal operating position.  Store the printer upside down or sideways or the end can cause problems.

• Owners of printer inkjet all-in-one Dell 962 thread (W7)

  Please follow the instructions below and then tell me what happens.

  Make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

  Unplug your printer.

  Download and run this patch to completely remove the printer from your computer. Run the fix, a MUST on Vista machines, until it prompts you to restart your computer.

  If you use Windows 7 also try... Driver Manual printer removal

  Restart your computer.

  Download the correct drivers.

  XP drivers

  Vista 32-bit drivers

  All other drivers

  Vista 64-bit drivers

  Install the appropriate drivers. You will be asked when connect you your printer (power on)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  If you use Windows 7, use the Vista drivers in compatibility mode.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Replace the Vista compatibility (try Vista SP2). Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

  Rick,

  Thank you much for the help. I took your advice and installed the Vista SP2 drivers in compatibility mode, and when my laptop is connected to the printer via a USB cable, I can print.  Now, here's the best... Later, I decided to have the printer put in place for the wireless.

  I tried to add a Dell network port, and then pass.  Did not work.  I tried also to add another printer by pointing to a shared printer on an XP computer.  I noticed one thing, it is that when the Dell printer software installed and prompted me to plug the printer into my USB port, it appeared that Windows snuck into another driver.  I saw a message saying that the printer was ready before the Dell software were made.  I also noticed that when I tried to create a new Dell printer two print drivers were available.

  In any case, I followed your instructions to uninstall everything (ran program of uninstalling the Dell software, rebooted, ran the patch to clean, restarted), then ran the Dell program configuration of the software (in compatibility mode Vista x 64 SP 2) and chose an installation over the network instead of local installation. He saw the Dell printer on USB wireless adapter and installed fine.  Now, everything seems to work wireless.

  I guess my point of view for writing is to warn that when you plug the USB cable during installation of Dell, it seems that Windows 7 is going to sneak in another pilot.  I also advise to install over the network if you want to try to use it wireless, rather than starting with the local USB installation and hope to switch to a network port later.  Thanks again for your message.

• HP Deskjet 3520e: question for HP Deskjet paper jam 3520e all-in-One Series

  I feel when the paper jam in the printer. I tried all the solutions they say to try to release the jam, but it did not work, and the message I get on the printer's "clear transport jam", I would like to know if there is something else I can try out the book?

  Hi@NIcoleSann22

  Thank you for visiting the HP Forums . One-stop shop for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  On the printer paper jam. Is this fair?

  I will definitely help you.

  Try the steps from the link below and check to see if that clears the error on the screen.

  http://HP.care/2dyjpZ7

  Let me know if this helped

  Resolv_S

  Happy to help you. I work for HP
  
  Please click "Accept as Solution" if you feel my post solved your problem, it will help others find the solution.
  Click on ' Bravo Thumbs Up ' to say 'Thank you' to help!

• 4500 HP inkjet all-in-one: the drivers Windows 10

  Error occurs when download drivers HP for 4500 to my laptop with Windows 10.  Fix HP ('Windows update') does not work.  HP Solutions icon is on the home page, but does not open.  I tried uninstalling and reinstalling several times.

  Hello

  Right click the button start and select programs and features, click View Installed Updates.

  Search for KB3132372 and uninstall the specific update, then try to open the HP Solution Center.

  If it works, temorarly will hide the update until Microsoft will resolve this problem by following this tool:

  https://support.Microsoft.com/en-us/KB/3073930

  Shlomi

• print single page hp inkjet all in one f4480

  How to print page 3 of the 5 page document w/o the other pages print on

  After starting a print job with file > Print or command-P, under Pages select from 3 to 3.

• 8630 inkjet all-in-one: scanner

  Any help appreciated.  New 8630 L7700 old replacement.  Analysis of contracts of real estate that may be long.  L7700 seemed to compress files a bit and has never been more than 22 MB.  8630 just scanned pdf typical of the contract, and had 42.0 MB.  Nothing changed on my computer.  Do not have WINZip.  Help? You need to send contract in 3 parts - very little professional.  Any suggestions?

  Hello

  Reduce scanning resolution should solve the problem.

  When the preview scan is displayed on the right side of the window, you would find an option to change the scanning resolution.

  Reduce the resolution and then save the document.

  Click HERE for the steps that should be useful in this regard.

• HP Photosmart Premium C410b inkjet all-in-one printer

  I bought a HP printer on ebay, and said it was ok necessary ink I bought a full set of 5 new HP ink for the printer, but when I turn on and charge she inks original application implemented inks that I don't I can do.

  Sorry you are having this problem with cartridges installation. Yes, you will need for modules installation so that the printer to go forward.

  You can contact the HP Support (1800-474-6836) and get the cartridges setup. Unused cartridges can be negotiated through HP to get the right. For more information, please call the number.

  I hope this helps.

• Cannot find solution to load HP Photosmart C5380 All in One printer scanner copier that runs on Windows XP or Vista. Have you tried most of the suggestions from HP

  What can I do to fix this problem without having to buy a new printer

  Have you unplugged the printer, then uninstalled any software via programs & features, and then in the devices & Printers HP remove any HP printer. Then run the cleaning disk & rebooted.

  After that you visit the site of HP and download/install the full features software appropriate to the C5380 and win bit version and only connect the printer when the installation says?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=3560275#N189

  If the installation is done correctly, then, what problems occur when you try to use the printer?

• How printing inkjet Hp enlargr all-in-one

  HP 3050 printer inkjet all-in-one

  How to enlarge print on printer

  The print size is controlled by your application software you are running.  You must increase the size of your program or your browser.

• Installation printer A920 all-in-one

  I just bought a used, refurbished OptiPlex 755 PC with Win 7 OS and am trying to install my all-in-One A920 printer. This is the printer that came with (my Dell Dimension 2400 series) desktop I bought about 7 years ago. I downloaded and installed (or so I thought) a Vista 64 bit driver I've read on the Dell website is supposed to be compatible with my Windows 7 64-bit OS. I plugged my printer and opens the file. I thought it was going to guide me through the process of setting up, but he did not. My computer recognized my printer, and he let me even in the all-in-one program. I was able to scan a document in color (but it wouldn't let me save it), I was unable to copy or print documents, and the "empty cartridge" box came up saying that black inkjet cartridges and color were empty; they are not empty because I recently replaced both cartridges. I miss any step, or not to do something in the right order? The printer does not give me a lick of problems on my Dell PC with Windows XP. I don't want to have to buy another printer, if possible, any help you can give me would be appreciated! Thank you! p.s. I have not loaded MS word on my new computer, so I wonder if this has nothing to do with the printer does not. (??)

  monksplay,

  The procedure is listed below. The OCR program, found on the disc from the printer, is required for scanning documents and fax.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Owners of printer inkjet all-in-one Dell A920 thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Rick

• What is the best all-in-one printer?

  We have been endowed with a HP Officejet 4632 years and there is no interface very well

  with our Mac.  When you use the charger, it does very well with occasional off-skew

  copies and scanned documents.

  However, when copying, scanning and resizing help flat, most of the empty time

  copies out.  When that happens, it should turn the printer power off and close

  Mac and start over.

  Are there other inkjet all-in-one printers

  I used the brother 7820N - it is an older model that makes black and white printing, but it connects beautifully on the network and reproduced faithfully what ever is sent.

  I guess the answer to your question depends on whether you need printing, what kinds of things print you color and what your budget

  There are some printers that are around 120-140 dollars if you are in the United States - try Canon or HP and are looking for discounts on stores like Best Buy or Fry

• All-in-one Officejet Pro 8620: officejet pro 8620 all-in-One scan negative

  How to scan negatives and 35mm on a HP Officejet Pro 8620?  I recently read it is possible on older versions, but can not find all the information about the printer I have.  Please answer quickly because it's something I have to do for my business.

  Hello

  Negative scanning requires a special film holder (as in This example), indeed such was offered by older models and not in the past years.

  The 8620 do not offer this kind of functionality, as well as any current inkjet all-in-one device and you can't scan negatives with your printer.

  Only proffesional scanners offer a these these days, not all in one of the devices.

  Here's the only model I have managed to find to your purchase today, there could be some more and it's worth trying a such google searh:

  Digital flat HP Scanjet 5590

• HP ENVY 7640 all-in-one: print envelopes and its telling me to load paper into the photo tray

  I am trying to print envelopes on the HP ENVY 7640 printer and it tells me to load paper into the photo tray. Have you encountered this problem and how to solve? Thank you.

  Hey @cmm3,

  Welcome to the Forums of HP Support!

  I understand that you have a problem when printing envelopes from your Windows 7 computer to your HP ENVY 7640 e-all-in-one printer. I would like to help you today with correct this print error "Photo tray". To start I have to make sure that the envelope is correctly loaded in your troubleshooting paper tray. Once you have confirmed that your envelope is loaded OK we'll take a look at the envelope to print on your computer settings. Can I please you follow the steps below.

  Step 1: Load the paper:

  To begin troubleshooting, please click here. Once the support document opens, please select the drop down list for "load envelopes. Please see the instructions on the screen to ensure that your envelope is correctly loaded in the paper tray. Once you have confirmed that your envelope is loaded correctly, proceed to the next step.

  Step 2: Check the print settings:

  Below I will provide you with instructions for printing envelopes per word. You should use a different program on your computer to print envelopes, please respond to this post with the program that you are using so I can provide specific measures.

  1. Open Word and click mail merge to top
  2. Select "envelopes" in the upper left side
  3. A page of envelopes and labels should now open. Enter your delivery and return address.
  4. Select 'Options' on the lower right
  5. Under the tab 'Options for envelopes' to ensure that your envelope is correctly selected.
  6. Select the 'Print Options' tab at the top. You must now select as appropriate feeding method for your product.
  7. Make sure that you choose the option "Face down".
  8. Also ensure that 'right-hand Rotation' is selected
  9. At the bottom of the window, select the drop-down list of pet food
  10. Make sure that the feeding method is set to main tray rather then select automatically
  11. Press 'OK' and 'Print'.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!