Cannot find solution to load HP Photosmart C5380 All in One printer scanner copier that runs on Windows XP or Vista. Have you tried most of the suggestions from HP

What can I do to fix this problem without having to buy a new printer

Have you unplugged the printer, then uninstalled any software via programs & features, and then in the devices & Printers HP remove any HP printer. Then run the cleaning disk & rebooted.

After that you visit the site of HP and download/install the full features software appropriate to the C5380 and win bit version and only connect the printer when the installation says?

http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=3560275#N189

If the installation is done correctly, then, what problems occur when you try to use the printer?

Tags: Windows

Similar Questions

  • HP Photosmart C4150 all-in-One printer/scanner/copier - the file you specified does not contain a compatible software driver for your device.

    I'm about to pull out my hair!

    My HP Photosmart C4150 all-in-One printer/scanner/copier will SCANNER is no longer.  I uninstalled the printer in the hope of re - install and fix the problem, but now I can't re-install.  He tells me I'm the operating system (Windows Vista - 64 bit OS) is not compatible.
    I remember that I kept getting error messages when Microsoft Updates running on my computer and I followed some "fix" for the error to go away in a few months.  I think I should have done something to mess up my driver?
    I'm not computer savvy so I hope someone out there can help me get my printer, re-installed and the scan option to work again.
    It seems to me have tried every download from the HP Web site, and nothing seems to help!

    Hello

    1 did you change your computer, after which the issue started?
    2. are you connected to a domain?
    3. have you downloaded the correct driver version?

    I would recommend that you download the correct driver (Vista 64-bit) from this link and check if that helps.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=1832919

  • HP Photosmart C3140 All in One - printer, Scanner & Copier

    I really need help! I've been on this site since yesterday just trying to post my question. I'd appreciate any assistance really. I have Windows XP 2007 - HP Photosmart C3140 all in one. Everything worked fine until I installed a new router - Linksys router Cicso Wireless-N-Home. My roommate has a wireless computer, not a laptop. He installed the router - my printer goes through the motions as if it will print even if nothing prints. I tried to locate the my HP Photosmart C3140 all in one on my computer is not listed. My old printer that I use to have installed HP Photosmart C3100 series Advanced Document list my computer. There are at least 5 items listed in printing (QC) how can I get my C3140 reinstalled? It's so frustrating. I really want to hire a geek to fix. With instructions step by step I hope that you can provide, I am confident, I can do it myself. Sorry for TMI (too much info)

    Sindi pebbles

    Thank you!!!

    [email protected]

    Sindi

    What is a PCU?  The printer is connected directly to your computer via the USB port?

  • Photosmart 2575 all-in-One printer scanner copier scans no longer, print only; MSI file not found

    It worked beautifully and still works fine as a printer, but can no longer answer mode "scan", which gives the message: "no scan options...". »
    I downloaded and installed your software (AIO_CDB_2570_Full_Win_WW_130_141.msi) from the HP Web site - even received a "Welcome" message after installing on my laptop (HP Mini running Windows 7 with all updates).  But when Windows tries to configure the installation package, it fails... (Message: Please wait while Windows configures HP Photosmart Essential.)   ...  Time remaining 1 minute' - then it gets no further.)

    Center of HP solutions running on my HP Mini, the message is: "your HP Photosmart 2570 series is ready" and I can adjust the parameters of scanning on the 2575 of my laptop. -for laptop and 2575 are "talk" to each other...
    When I run printing HP and Scan Doctor 4.4, it found errors of Solution Center & Twain & tells me I need an update to fix the errors, but it sends me to the same place from where I have already downloaded the software updated!
    Windows7 does not recognize the newly installed software & more like another package: "HPPhotosmartEssentials.msi", which he says he can't find.

    Instruction was also found on the HP Web site: "Locate & install the .msi file is missing file in the Temp of your computer folder", but there is no msi file in the Temp folder (download goes to the downloads folder).

    Please response ASAP - I cannot USE MY PHOTOSMART2575 MORE scanning DOCUMENTS and have lost DAYS on this - making circles in the round...

    I look forward to your help!

    Jeanne

    [Thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information].

    Sorry to say your advice has not solved my problem - but received a phone call the week last of Henry of HP at Gateshead (n. of England) support.

    After 4 hours or more (he missed his lunch...!) firmly on the phone and computer being "picked up" remote, it has removed HP all THE files on my computer (HP Mini) and then reloaded OLD original software for 2575 with updates,... Finally got all-in-one scan with the HP Mini success - so big thanks to Henry at Gateshead for his help there... :-)

  • HP photosmart 3210xi all-in-one printer-Scanner-Copier

    My problem is that I need a piece of the printer.  I like the printer, but the large gear that drives the ink pump is made of plastic and is worn.  I know the printer inside and outside so I could fix this printer if I could find a part.  I learned that the printers are not repairable.  However, HP must conclude a contract with a MFG Company somewhere to put together them.  How can I identify a number of reference and/or a company to order parts?  Without that part (gear), the printer is useless.

    Hello Pal700,

    Sorry to say that these pieces are not available outside and not customer replaceable ar IAM.

    That's why rquest to call the HP Technical Support for better options.

    Please call the HP Technical Support for assistance.

    If you are in the United States, the toll free # is 1-800-474-6836.

    If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

  • Invalid double-sided printing on the HP Photosmart C6280 all-in-One (printer, Scanner, copier)

    On my 'old' computer (ca. 1974) the print mechanism duplex worked fine, but after that I installed the printer on my 'new' PC (Windows 7, 64-bit), the double-sided printing feature works not at all (although it allows me to print on both sides manually).  In order to operate as it did in the past, should I uninstall everything related to the printer before reloading the software?  Or do I have to reload the software at all?  Or what should I do?  I would like to know before taking any action, because I don't want to create problems for me or my computer/printer.

    The duplexer must be set to "installed" as described in The Vista/Windows 7 Duplex Printing Guide troubleshooting here.  You will not need to uninstall and reinstall the driver.

  • HP Photosmart 3110 all-in-One Printer Scanner and install the HP for Windows 7 Solution Center

    Hello

    I have a printer HP Photosmart 3110 All in one with Windows XP. I bought a new computer with Windows 7. I plugged my printer HP to Win7 and now scan does not work. I need your help to install the HP Solution Center and make it work under Win7.

    There is not a download for Windows 7 on this printer. It is the only way for you to scan through paint. You will also be able to get the center of solutions is due to any software.

    THX

  • HP C5380 all-in-one printer: a thick black/gray line down the page when scanning.

    1 HP Photosmart C5380 all-in-One Printer

    2. Windows 7 64 bit

    3. no error is, as usual but preview and print with a dark gray line / think through the page.

    4. I got a new monitor.

    How can I fix?  the optical reading area is clean, no dust or dirt present and it just started this without reason. The connections are good, I unplugged and plugged the cables of the computer and the printer and the problem is still there.

    When I scan the document line is present and even when I print the line appears on the printed page is not my screen.

    bbjae, it looks like there may be a residual electric charge accumulated in the unit.  When was the last time you did a Hard Reset on this unit?

    Hard Reset:

    * Unplug the unit while the printer is on

    Disconnect the other end of the power cord from the wall jack directly

    * Wait 30 seconds

    * Plug power back in and make sure that the device is running

    So, it is a document with the steps to help fix the vertical lines and scratches in the copies or scans, click on the link below:

    http://support.HP.com/us-en/document/c01887471

  • HP Photosmart C4580 all-in-One Printer compatibility with Windows RT

    Original title: HP Photosmart C4580 all-in-One Printer

    My HP Photosmart C4580 all-in-one printer will always be compatible with Windows RT and my new Surface?

    Hello Jade_E,

    Your printer will be compatible with your Surface RT when HP develops and releases a pilot of RT for the HP Photosmart C4580. Hope it's soon.

    Have you tried any other HP drivers when you install this printer on the Surface? Because these drivers are generic, one of the other HP drivers might work.

    If you find a driver that works, please let us know which driver he is. Thank you!

  • Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

    Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

    How can I solve this problem?

    Other suggestions for this problem has not worked for me, but the info at this link on how to reset the computer worked! I thought I was headed to the store to buy a new printer, but this fixed.

    http://www.CCL-La.com/blog/index.php/HP-Photosmart-ink-system-failure-1/

  • Problem with the installation of the solution Center for a HP Photosmart Premium all-in-one printer - C309g

    Hi people,

    I searched many threads and found some tips to remedy this, tried and had no chance.

    I am running Windows 7.  All updates are underway.  When I bought the printer, I installed the software (on Windows 7 OS) from the disc and everything was fine.  Fast forward a year and Solution Center has stopped working.

    Uninstalled all HP software to reinstall.  I could only reinstall HP Update.  I was able to load the basic print and scan drivers, but not following any software, including solutions Center.  Installation stops abruptly after "install updates".

    I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.

    What can I do with my printer (HP Photosmart Premium all-in-One Printer - C309g)?

    Thank you

    Alex

     

    Screenshot of the update section:

  • Cannot install HP Photosmart C6380 all-in-One Printer

    Original title: HP Photosmart C6380 all-in-One Printer, it will not be installed in the computer disk or web site

    None of the things I have tried will allow programs to download and when I go to detect does not detect the printer at all so anything that I want to use this for is not good and I about ready to kill hp all to gether

    Hello

    1. who is the operating system installed on the computer?
    2. have you checked if the HP printer is compatible with the version of the operating system that you are using?
    3. do you get an error message when you try to install the driver?
    4. what all troubleshooting have you tried?

    If you use Windows 7, follow these methods.

    Method 1: You can also run the fixit of material.

    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2: in the Windows printer problems

    For more information, see these articles:

    Install a printer
     
    Find and install printer drivers

    Please provide us with more information on question help you also.

  • PriI impossible cannot print in color on my HP Photosmart C6180 all-in-One Printer.

    I can't print in color on my HP Photosmart C6180 all-in-One Printer.  I was not able to find the color preferences in the printer dialog box.  Any help?

    Try to uninstall and reinstall the software and drivers and see if it works for you.

  • Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

    Until that number today printing problems.

    Now can't print from Word or any text file.

    All other OK.

    Uninstalled and reinstalled SW.

    Problem remains.

    Word files and text printed in WHITE.

    All others are OK.

    Hey @Clark_Stillman,

    I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

    How to print a report of quality diagnostic:

    1. Load plain white paper in the input tray.
    2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
    3. Press arrow right () and select Tools, and then tap OK.
    4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

    • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
    • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

    Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

  • Photosmart C8180 All-in-One printer that turns off completely in the middle of printing.

    I have a Photosmart C8180 All-in-One printer that powers completely in the middle of printing, wasting time, paper and ink. It restarts also sometimes more and more and more and sometimes it stops and all the lights blink quickly, show an on-screen error code. During these periods, the power button seems useless. I use the printer with a HP Pavilion dv7 laptop running Windows Vista and an HP / Compaq Presario Windows XP.

    When the C8180 works correctly, it's great. But I can't allow myself to be play roulette of the printer. Help, please. Thank you.

    Thanks to kkcb9395 for your help.

    Unfortunately, I have not found a solution to fix my HP C8180. The 800 number only referred me to another number (866-234-1377) where someone in India tried to sell me a phone support or a new printer. Phone support will not fix a burned capacitor and the new printers HP scan slides. Not to mention the $100. new ink I'll have to eat if I can't solve this problem.

    For anyone who has followed this thread and interested in your own C8180 setting here is a link to a parts list.
    http://www.partshere.com/hppartslist/hpparts.asp?part=L2526A
    If you find a repair manual, let me know.

    I am a customer of HP for HP CEO and longtime who think they have the customer service thing down, I'm on my way to buy an Epson.
    Thanks again for your time.

Maybe you are looking for