120W adapter dv6-7014NR?

Similar Questions

• DV6-7014nr: no drivers or software not listed on HP Support for dv6-7014nr

  26 July 2016 there is no drivers or software listed on HP's Support page for my dv6-7014nr product.

  There is a message-

  We were able to find the drivers for your product. Pilots may be developing, so please, check back at a later date or visit the product home page. -end

  When will drivers and software available? They were recorded yesterday when I started the process of clean install of Windows 7 x 64. Now, they are not now and I find myself with a non-functional system due to no access to drivers.

  Thank you.

  @Oberkanone

  Drivers are back.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV6-entertainment-notebook-PC-series/5226230/model/5255909

  REO

• Upgrade hard drive SSD HP Pavilion dv6-7014nr

  Hello
  I have a HP Pavilion dv6-7014nr and would like to change my standard hard drive for an SSD Sata(+-700Gb).
  My questions are:

  -My laptop does support SATA III?

  -Physics of SSD what size should I get? 2.5 inch?
  
  Is there a maximum capacity of SSD supported by the laptop?
  
  (I'm not referring to the WSSD)
  
  -I thought I'd get something around 350 GB, advice? (Mark?)

  Thanks for any help

  HP Pavilion dv6 Entertainment PC Maintenance and Service of Guide;

  Hard drive

  Takes care of 6.35 cm (2.5 in) discs hard in12.7 mm (. 50-in), 9.5 mm (. 37-in) and thicknesses of 7.0 mm (. 28 - in) (all hard drives use the same bracket)
  Customer-accessible
  Serial ATA
  Protection accelerometer support
  Supports the following drives:
  ● 1 TB 5400 RPM, 12.7 mm
  ● 750 GB, 7200 RPM and 5400 RPM, 9, 5 mm
  ● 640 GB, 5400 RPM, 9, 5 mm
  ● 500 GB, 7200 RPM and 5400 RPM, 9, 5 mm
  ● 320 GB, 7200 RPM and 5400 RPM, 9.5 mm and 7.0 mm
  SSD drives

  Supports the 160 GB drive

  The list above is indicative of the readers installed at the factory and is not exhaustive. If the computer supports SATA2 or SATA3, most SATA3 SSDs will be compatible. The computer should support the SSD up to 1 TB or more.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Drive hard uograde SSD HP Pavilion dv6-7014nr

  Hello
  I have a HP Pavilion dv6-7014nr and would like to change my standard hard drive for an SSD Sata(+-700Gb).
  My questions are:

  -My laptop does support SATA III?

  -Physics of SSD what size should I get? 2.5 inch?

  Is there a maximum capacity of SSD supported by the laptop?

  (I'm not referring to the WSSD)

  -I thought I'd get something around 350 GB, advice? (Mark?)

  Thanks for any help

  I just put a 840 EVO 250 GB Samsung in a HP Envy m6. Without checking, I am almost sure that your machine supports SATA III, no new laptops will not have that. Even if he has not a SATA SSD will work with SATA or SATA II even I have.

  You reason that 2.5 "is what you need. One thing to check is if your machine is really thin it may need a smaller height z. Some readers are 9.5 mm high (especially mechanical) and some are 7 mm. I know that the Samsung drives are 7mm while a former 520 Intel, I bought was 9.5 mm.

  As far as I know, there should be no maximum size that would support the laptop. Given that 1 TB is the maximum size of 2.5 "SSD and I don't think that 2 TB will soon happen, you can get any size. The only reason why it would be same as a limit would be something artificial that HP has added as blocks of material that they use.

  For ability, it depends on your needs. I have several computers and keep most of my media on USB 3 external drives and the main server that has a lot of disk space. If you plan on using this system and you want to download music, movies and images, you may want to look at 500 GB being the minimum. Hell, if your budget allows, you can enter a 750 GB Samsung SSD EVO for less than $400. While this seems like a lot, keep in mind that you can pass on to your next laptop, a desktop computer, or purchase a chassis and use it as an external USB drive in the future.

• HP DV6-7014nr wireless card replacement

  Hi all.

  I currently have a HP DV6-7014nr with Windows installed 8.1 and parts of stock out of the box.  I noticed that the stock is an internal wireless card is not dual-band.  It is a very large problem with my current situation, in which I can't take advantage of the possible bandwidth to my ordinary place almost as well as if I had installed dual card.  The warranty is already in place, so I am not concerned by the cancellation of the warranty, I just want to know if the card that I'm looking work inside the laptop.  I was going to buy a wireless card Intel Centrino Advanced-N 6235 HMWWB for my laptop, and I need to know if this card will work correctly with inside my laptop.  Thanks in advance.

  Well have the driver on the hard disk or on a key USB available for install after you pass cards. You can't install the driver before the material is present in the computer.

  Also, you will probably find that Windows 8.1 has built in the driver of the Intel card.

  Otherwise download here for Windows 8.1 Intel driver and he is ready to go:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23726&lang=eng&ProdId=3315

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Dv6-7014nr sd card

  Maybe you can help me, people. My 4 - month, dv6-7014nr, under Win7 Home Premium on a drive hybrid 750Go, has a bad habit: if I leave it unattended for a period of time, the screen turns off (most likely the screen saver, I get it). If I shake the mouse, I have about 50/50 chance either get my back of the screen or a BLACK SCREEN!

  There is one way I found to get back on this BLACK SCREEN: put the laptop to sleep, then back outside tool, connect to any new.

  That is this stupid BLACK SCREEN and how to I get rid of him forever? Thank you!

  We can mark it as RESOLVED.

  In my frustration, I finally called HP Technical Support, dreading the call. But Ann was patient, friendly, and very knowledgeable. She took me through the steps to remove the driver for the SD card reader... whose Windows 7 immediately replaced by itself. FACT! SD card reader reads SD cards!

  Technical Support HP and GOOD FACT ANN thanks!

• Replacing the dv6-7014nr autour former hard drive - it'll work?

  Here's my dilemma:

  My new dv6 7014nr, customized by the dealer with performance 12 GB of RAM and a disc of hybrid SSD 750Go (best decision I did!), has a bad keyboard: the 'C' button keeps jumping off the power. They offered to replace the laptop.

  Problem is, I have sensitive data on my hard drive and I want him to stay here. So, here's the plan:

  I'm very comfortable in pulling the hard drive and leave it here. The dealer will build me a dv6-7014nr, 12 GB RAM, SAME performance all the same and ship it to me without a hard drive. I've happily jump in my 'old' hard drive and rock on.

  Which will work? Or the new material causes non repairable conflicts?

  Thank you!

  Welcome! And thanks for posting your question.

  If the machine is, like you say, identical, there should not be any conflicts. In theory, any SATA hard drive should power be removed to any machine and placed in another computer SATA or external drive Bay. The only exception would be if your drive was encrypted. What suite of Windows is installed on the hard drive? (7 or 8? Home Premium or professional?)

• problem adapter dv6 - 7095ca

  So I purchased a DV6 - 7095ca and when I plugged it in, I was told that I needed an adapter stronger. So I took the rear adapter (was a 65w) and they gave me a replacement 90w Hp card. However, I just plugged and got the same message again. Is there a setting I need to change on the laptop? Or should I buy a more powerful adapter yet?

  ruruliu is correct. The list of product specification the power supply as being 120w. You will need to get one of these adapters 120w to get rid of the error message. Here a link to the HP parts store where you should be able to buy the piece. I hope this helps!

• AC adapter dv6-3143sa light always on?

  Hi, I recently got a HP dv6, I noticed that the ac power light is always on, even when the laptop is turned off, is this normall? The light turns off only when the power is off.

  Matt29 wrote:
  

  Sorry just to clarify, the LED next to the power socket adapter stays on even when the computer is off?

  If it remains on the AC adapter unplugged there is actually a problem. If the laptop is under tension and the power adapter is connected the led stays on.

  Source reference: HP media partner library

  Best regards
  ERICO

• Pavilion dv6-7014nr: Synaptics touchpad has ceased to be recognized! NEED HELP URGENT!

  I was using my laptop for general browsing today and she left open for about half an hour to attend to other things, but when I came back, I found that the touchpad had stopped responding completely - the two buttons and the trackpad. The touchpad no longer appears in Device Manager.

  I uninstalled and reinstalled the driver Synaptics touchpad of HP Recovery Manager and the Web of Synaptics, company site restarts in each case, but nothing helps. After each restart, however, I received a pop-up message in a program, I install it, TwoFingerScroll saying "Synaptics touchpad device is not found! This program caused no nay problems within two years, I've used. The touchpad, also, has never had any problem.

  It was, as I said, a development suddenly. Fortunately, I had a USB mouse on the spot so I'm managing it, but it is imperative that I solve what I am a student and have to present my final thesis in a week; It threatens to derail my efforts completely.

  Please advise on a solution.

  Thank you!

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you are facing problems with the Touchpad of your laptop
  We will surely help you with this

  Steps to drain the static charge and load the BIOS default settings to solve the problem
  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 to load the default Installer for BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now, please wait until the unit load the Windows operating system

  Now please re - install the drivers for touchpad of HP Web site in order to solve the problem

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• USB 3.0 ports dv6-7014nr acting as USB 2.0 ports

  I FINALLY got an another USB 3.0 - the Samsung Galaxy Note 3 - device and connected on USB 3.0 to my HP laptop. Without a hiccup, recognizes the port and the phone connects... but a popup advises me that the transfer of data and load would be faster if I used a USB 3.0 port.

  I tried all USB ports on this machine, with exactly the same result. What happened to USB 3.0 on my laptop, and how can I restore it?

  Thank you!

  Using a USB 3.0 or usb 2.0 cable? This could be the problem.

• Is a HP 6.15 A 120W HDX18-compatible adapter 19.5V?

  Original adapter from my HDX18 died this week, and I ordered two new genuine HP adapters with the exact specifications I need. However, my graphic/web design company is executed only that the laptop and I client work I need to do while I'm waiting for my new adapters to arrive. I have my client files stored externally, but no laptop I can borrow has, in the meantime, the software that I have to do my job. A friend of source on for me a 6.15 A 120W adapter to borrow 19.5V, but my original adapter specifications are 18.5V 6. 5A 120W. The difference in volts and amps will not affect me (damage to my laptop or the adapter) if I use this adapter with my HDX18 for a week or two?

  the code on a spare elitebook charger a smart charger, same HP seen & have used in 18.5V older ok.
  Safe to try.

• PIN Smart Dongle AC adapter 90W KG298AA

  Hello

  I have a labtop HP model: 2170ee dev6

  I want to get an AC adapter, and I found that the chargere:

  PIN Smart Dongle AC adapter 90W KG298AA

  is compatible with the service:

  DV6-2100 Entertainment Notebook PC series

  However, my original adapter 120w 10 rather than 90w, is so this adapter is really compatible with my laptop?

  Please help me.

  Thank you much in advance,

  Best regards

  Aya.

  Two things may happen: it is a genuine adapter 120W or mislabelled as a 120W adapter 90W Adapter.

  More than likely, it is a 120W adapter.  However, I suspect the damage was done as it would have already been long apparent before three years ago.

  If it was the other way, too low on watts, then he probably wouldn't have charged the battery.

• Query current AC adapter

  The wire of my adapter became tired between the adapter and the computer - I ordered a new one, but instead of 15V and 8A (for a Satellite A40) its 15V and 10A - the provider says its Ok but I won't burn my baby's brains! Can someone reassure me?

  Thank you

  Donald

  Hello

  Your Satellite must certainly 15V 8A 120W adapter PA3237U-1ACA part number.
  Try to order the original part.

• HP Smart adapter

  Hi, I bought my Envy 15-j151sa a week ago. A day after that I started to receive smart HP adapter message.

  

  My adapter is now 90 W, I think about to buy 120W or better, but I'm not.

  Hello
  
  Through 7, 27 Page in this manual:
  http://h10032.www1.HP.com/CTG/manual/c03943414.PDF
  
  For the AMD processor model, 120W adapter is not listed.
  
  Do a hard reset and check if the error comes up again.
  http://support.HP.com/us-en/document/c01684768
  
  Test your battery also from HP Support assistant utility battery test.
  
  If you are under warranty, contact HP in your area for the replacement of the spiritual adapter the HP number given in the manual.
  
  Concerning
  
  Visruth