13 elements do not remember crop settings

Similar Questions

• Somehow, I accidentally hit th control/shift / and wound up with the computer, do not remember my settings, the browser history, etc. How can I undo that?

  I clicked on the 'troubleshooting' box and install right now but it does not appear to have changed things. my stored passwords still do not appear. I'm not very computer literate, so the simpler you keep it, the better. I am so appalled that such a simple mistake could have such far-reaching effect. I have Windows XP and use AOL for email, browser

  I noticed that you have enabled the keyboard navigation:

  • Accessibility.browsewithcaret: True

  You can switch the power switch keyboard navigation by pressing F7

  • Tools > Options > advanced > general > accessibility: [] "always use the cursor keys to navigate through the pages."

• Firefox doesn't remember "user names". In addition, Firefox does not remember dashboard settings IE. Toolbars, etc. How can I fix this.

  Nightly Firefox pours his memory of the names of users and toolbars.

  Sounds you have cleaning software running which removes cookies and possibly other profile data.

  The Bank Web site may use autocomplete = off to prevent Firefox to save and fill in the name and the password.
  You can remove autocomplete = off with a bookmarklet to make Firefox ask to record the name and the password.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered

• LR3 does not remember last filter setting

  When you access the image files in the library module, LR3 does not remember filter settings used during the last visit. It was a great feature in 2. Is it possible to restore this desirable behavior?

  It is a post-it.

• Windows 7 not able to remember my settings of the mouse when I alternate mouse

  I have problems with Windows 7 when I plug in 2 different mice at different times.  I take my laptop to work and I plug a USB mouse here at home I plug in a different mouse (the two Microsoft, various models).

  My problem is that windows does not remember the specific settings for each mouse.  When I go into control panel-> devices and printers, I can see that windows detected correctly where I used the mouse.  However, when I right click and go to "Mouse settings" and click on the tab "buttons" 2nd (there are 2 tabs, after you have installed the mouse drivers), the tab from the drop-down menu 'Connected the device' is unchanged: it never gets changed automatically.

  So when I get home, I have to choose my mouse (comfort optical 3000) and choose the right setting for the thumb touches (or "expand button", according to windows).

  When I get to work, the scroll wheel does not work in all applications, so I have to go to settings, then choose the right mouse...

  
  

  Is there anyway I can avoid this clicking repetitive?  If windows 7 should not be able to automatically detect it along for the mouse settings and use the previous settings for this mouse?

  
  

  Thank you

  
  

  Jeremy

  Hey Jeremy,

  This could be due to third party settings and windows settings conflicts. To avoid the same, uninstall all conflicting mouse software.

  Method 1: Uninstall all conflicting mouse software

  If you have any other software mouse that is installed, such as the Logitech software or touchpad, this software can conflict with the IntelliMouse software. To uninstall other software, follow the appropriate procedure for your version of Windows.

  Open programs and features in Control Panel. To do this, follow these steps:

  1. click on start
  2. in the search box, type appwiz.cpl.
  3. press ENTER.
  4. Select the software and then click on uninstall.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  Method 2: Run a "clean" boot, and then reinstall the IntelliPoint software

  Step 1: Restart the computer by using a clean boot

  When you start Microsoft Windows, other software may start with the operating system. These programs may include antivirus and system programs that may interfere with your mouse. When you perform a clean boot before you start the installation, you prevent these programs from starting automatically.

  1. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available).
  3. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  4 restart your computer.

  For more information:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Step 2: Remove and reinstall the IntelliPoint software
  
  1. to do this, follow steps 1-3 in method 1.
  2. click on Microsoft IntelliPoint.
  3. click on uninstall/change.

  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  4. click Yes to confirm that you want to remove the program.
  5 restart the computer.
  6 reinstall the IntelliPoint software.

  You can download the software for your edition of:
  Download mouse and keyboard software

  For 32-bit Windows 7:
  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=mouse&name=D1T-00002&OS=Win7_32&lang=en

  64-bit for Windows 7 driver
  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=mouse&name=D1T-00002&OS=Win7_64&lang=en

  Once the download is complete, install the appropriate software and see if that solves your problem.

  Additional help:

  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

  Once you have finished installing, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. on the general tab, click the Normal startup option, and then click OK.
  3. When you are prompted to restart the computer, click on restart.

  Does this solve your problem? Post back and we do know.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• under the Privacy tab address bar, do not remember settings

  Since Firefox 16 and 17 versions are out, I always had this problem with the location bar to not remember my choice. "When you use the location bar, suggest: nothing." Is what I prefer, but if I never reboot my computer or just restart firefox over all, it boils down to the option "history and bookmarks. I find this very annoying. The reason why I've waited so long to report that it is because I was hoping the next version of Firefox would take care of it. Is what I can do to fix this or I will just have to wait until it is set by Firefox itself?

  Unfortunately, that didn't help me. I have advanced and uninstalled Firefox completely without saving any customizations, and reinstalled. Seems to work fine now.

• Photoshop elements 12 [low (grey) screen where I do my crop settings and set my resolution is gone].

  For some reason any (I must have hit something wrong), the bottom of the screen (gray) where I do my crop settings and set my resolution is gone. The picture is there but losts of border grey, but the fundraising and the resolution went. I really need to get back to work. Thank you

  What operating system do you use?

  If a mac, you can click the Green zoom button to fit the 12 ESP on your screen.

  

  If windows, click expand in the upper right of the screen to fit pse 12 on-screen.

  

• iPhone does not remember network wifi from 10.0.2 upgrade

  Hi, I have an iphone with OS 10.0.2 5s (A 14, 456). Given that I have updated to version 10 my phone does not remember the hidden network (hidden ssid, security wpa2, no proxy, without filter mac or anything special) at work. The AP is a Cisco Aironet 2602i works correctly for others (with iphones with os 10 and other phones/computers as well) and this worked well for me before the update. If I add once again the network by entering the name and password that it connects without any problem and works fine until I have disconnect or leaving the office. Once I disconnected or run out of reach and restart the connection (manual connect or just getting back to the beach) the network is no longer there as it never existed then I have to start the whole process from the beginning, if I want to use wifi.

  I have tried of course to restart the phone and add the network and remove it while I was connected and then add again, but so far nothing works.

  It is something he does not automatically connect, but because he forgets all the information I need to type again and again is quite annoying. Y at - there someone out there who could give advice what could be the problem and how to solve?

  Thank you!

  Hi Sircsak,

  All you have to do is reset the network settings.

  Go to settings > general > reset > reset network settings

  Finally, add your network.

  This should solve the problem.

  See you soon!

• My Control Center won't let me not "remember passwords for Sites" option is gray in color instead of black and won't let me click on it?

  My Control Center won't let me not "remember passwords for Sites" option is gray in color instead of black and won't let me click on it?

  It also won't let me select "Exceptions" or "Change master password"

  Thank you

  You can check that you are not Firefox running in permanent private browsing mode (don't remember history).

  • https://support.Mozilla.org/KB/private+browsing
  • Firefox > Preferences > privacy > Firefox will be: "use the custom settings for history".
  • : Uncheck the [] "always use the private browsing mode.

• Reminder and calendar is not remember things

  My reminder and calendar are not remember things even if I set the time and date if event 5,10 minutes before.

  the stimulus passes time and no alert comes. When I recall his due. same thing in the calendar. No alerts...

  the sounds are put right. Even made with siri also, but no alert anyway... what else could be the problem of this alert no? Please help and guide

  Hello naveenvnair,

  Welcome to Apple Support communities. It is my understanding, you receive notification of your reminders and calendar events. I know how it is important to be informed of the specific information. I'm happy to help you to get this resolved with you.

  There are a couple of settings that may affect your alerts. Please make sure that your notifications are enabled for reminders and calendar. Go to settings > Notifications. Also, make sure you do not disturb is turned off by going to settings > do not disturb. Here is some additional information on notifications:

  Use the Notifications on your iPhone, iPad and iPod touch

  Have a wonderful day!

• I asked firefox does not remember passwords now it wont let me turn the tide?

  Hello
  I need help please, I asked firefox does not remember passwords now it wont let me turn the tide?
  I go into OPTIONS/SECURITY and don't forget NO words of PAST of SITES FOR, is is more highlighted so I can't select it.
  I have one installed and re installed Firefox and this has not solved the problem.

  Can someone please offer a solution? Thank you

  Hello, firefox will not save your passwords when you put to execution in permanent private browsing mode ("never remember history" in options > Privacy panel).

  Privacy, historical settings of navigation and-no-track

• Why Safari remember password settings 'record '?

  Safari is able to store logons and passwords for web sites which is very convenient.  Safari can also be set to never save passwords on selected sites.  This option displays as "record" in the preferences of passwords.  This is a security measure handy for sites such as online banking.

  Since 10.11 came out, I found that Safari does not have the "never saved" settings, which I do a session to another.  So, whenever I go to my web site of banking services online that Safari asks if I want the saved password and each time, I click "never for this site".  I can see this setting if I display the password dialog box.  But, if I close it, then reopen Safari, these settings are gone.

  Does anyone know how I could enable Safari to remember these settings?

  Thank you.

  Garry

  iMac (late 2009), OS X 10.11.3, Safari 9.1.1.

  Hello!

  The simple things in life can make life difficult, right? Laughing out loud!

  Safari > Preferences, click the password tab There you can uncheck the usernames and passwords. In addition, you add the websites you want and check the Show passwords of Web sites

  In other words, you are in control!

  Bravo!

• Firefox 24 - options not remembered from one session to the other

  When I've upgraded to Firefox 24, all the v23 option settings restore default values. I put them back the way I had them before, but after restarting the browser, all default as before. I use NoScript, and any change to its rules is also lost when I restart the browser. I rebooted several times. with no system restarts and the results are always the same.

  History and passwords seem to be updated and kept in sessions. The problem is with the data to configure Firefox and NoScript.

  I am running XP SP3 with 2 user accounts. One is an administrator account that I use only for the maintenance of the system, and the other is a limited account where I do most of my work. The admin account, where I installed v24, remembers changes in configuration between sessions; the problem is with the limited account, which is the one that I care.

  I checked the profile in use for the limited account, and files have updated definitives in application Data Mozilla \limited user\application folders, so it doesn't look like a permission problem. This folder contains now 86 prefs-files numbered out of all 3 have maintenance date today, but the file prefs.js watch was yesterday, before I improved versions.

  There are also 25 sessionstore-files numbered, that have all of the old dates, but the sessionstore.js and sessionstore.bak files show as recent.

  Any suggestions?

  After posting the question, I found this thread in the support forum - https://support.mozilla.org/en-US/kb/how-to-fix-preferences-wont-save?esab=a & s = firefox + + 24- + options + not + remembered & r = 1 & as=s#w_reset-firefox-to-fix-the-problem.

  Following the instructions, it seems that the file for the limited account has been altered in the upgrade to the Version 24. I deleted, and the problem is solved.

• Firefox does not remember the password or user name. Have done everything suggested, still no luck.

  Firefox does not remember the password or user name. Have done everything suggested, still no luck.

  Make sure that you are not Firefox running in permanent private browsing mode.

  • https://support.Mozilla.com/kb/private+browsing

  To view the history settings and cookies, choose: Firefox > Preferences > privacy, choose the setting Firefox will: use the custom settings for the story of

  • Uncheck the box: [] "always use the navigation mode private.

  Do you hear the names and passwords in the password manager or do you mean that you are connected is no longer on to (remember to) Web sites after the closing and restarting Firefox?
  
  There is a difference between remembering the name and the password in the password manager and a check box "remember me" on a web page.
  
  The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and which is sent to the server.
  
  If that "remember me" cookie is deleted or is corrupted or is not send to the server, then the server remember that you and you must connect once again.

  • http://KB.mozillazine.org/cookies
  • http://KB.mozillazine.org/Password_Manager
  • https://support.Mozilla.com/kb/make-Firefox-remember-usernames-and-passwords

• I do not remember identifying apple.

  Hello! My name is Nikolai. I have a problem! I have reset the settings on your phone, I asked the Apple code. But I do not remember your login or password! I have the documents. Is there a function to find the iPhone. Help me please! Reset your password! and Apple ID. iPhone 6 Plus, gold, 16 GB serial number. FK * 5 QT, IMEI *.

  If you do not remember of your Apple ID, you can go here to try to get it back: FORGET APPLE ID

  If the Apple ID which is connected to the device is someone of another Apple ID, then it is Activation locked to this Apple ID and only a person who knows that Apple ID and password can remove it.

  Good luck

  GB