13 "MBP 8.1 died strangely - but battery test as well

Similar Questions

• The Car battery test (automobile)

  Hello world

  I'm new to Labview test and I would like to learn how it works for example of a car battery test, test diesel Injector and other parts for the automotive industry. I would ask your suggestion where I start. My question is not directly test a car battery, but my approach is to deepen my knowledge in particular to this.

  Best regards

  Ravi

  Hello

  Little case studies for battery management systems are listed here:

  http://search.NI.com/nisearch/app/main/p/bot/no/AP/global/lang/en/PG/1/q/automotive%20battery%20test...

  Go to NI.com and use search to find articles on a particular area.

  You can also call the local representative or who should be able to give you more details about your particular case.

  Hope this informationis helpful for you.

  Ravi

• Battery test

  I have a computer laptop dv6t and laptop off when I unplugged the power cord. In the lower left corner, the battery notification was 90% +. I went to do a battery test and it came out with

  Failure ID: 60FQQM-5K76JQ-MFH141-COEPO3

  Main battery

  Battery test: failed.

  I guess I need to replace the battery, but I want to just make sure before that I do.

  Hello

  As the battery Test is a not you will need to replace the battery.

  In case your device is still covered by warranty og call HP technical support or if your device is OQ you can replace the battery yourself.

• I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? suggestion pls

  I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? Someone had this problem? Suggestions please...

  nidgp wrote:

  I left about 80 days of warranty. I'd give to repair?

  Absolutely, examined her!  There is some kind of hardware problem.

  Ciao.

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• The new version does not see my camera. But my cam works well with older versions. What should I do?

  The new version of Skype does not see my camera. But my cam works well with all older versions. And it works with any other programs as well.

  Try to uninstall the version 6.18 and install version Skype 6.14.0.104.

  You can use this download link for the 6.14.0.104 version:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Don't forget to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• seeing cRIO of State flashes 4 times, but the prog works well until you restart cRIO

  I have a cRIO 9073 with a significant program in RT and FPGA, using a front-end for Windows communicating using the network of shared on the cRIO variables.  Great short program if I simply deploy the RT VI main (with of course built FPGA code), or if I deploy the RT version.  However, if I select 'run as starting", works to deploy on the main façade of RT VI opens and I see activity (it works very well), but then I click to restart the cRIO, and the cRIO restarts only to run for a second or two before the status light blinks 4 times (soft error).

  I doubt it's a problem of memory as suggested by the manual as if it were the case, I expect the deployed application would fail as well, but it works very well.  I have check the fault log and see nothing useful.  I see also on the deployment of the cRIO dialog box has ~ 12 MB free after the deployment, if I deploy against a target with the "NOR-RIO 3.6.0" software - January 2011, and further if I use a minimum package with additional components, I need (network engine Variable and editor of State system).

  It was a project of years which worked beautifully and recently required change.  In the meantime, my development PC has been updated with Windows 7 64 bit.  I am running LabVIEW 2010 SP1 Professional Development System with RT and FPGA packages.  CPU utilization on the cRIO when I run the deployed application (with the cover available for diagnostics) is about 20%.

  Any suggestions?

  Thank you

  Erik

  I found my problem, and it was mine and not Windows.

  I ended up using the Console output for help and saw Exception Code 6 (0 x 00000006) appear on the console, ultimately ending with Safe Mode - software in Max error message unfortunately, I can't find anything looking for this exception code, so I went back and looked at my VI in real-time , and I found my problem: I had added two new network static Variables (NSV) and had not fixed the reference to the Relative target Mode. I have so many DRVS in this VI that I had not also wired their outputs error to an indicator for troubleshooting.  Since I have it, but even that resulting in still mode safe, if I have returned the absolute reference Mode.

  I suspect that the VI has run in interactive mode, as the project was the IP address of the cRIO set when the RT build was made and later failed, because the IP address changed when the cRIO was on the network.  Oddly, I had a lot more luck for the cRIO to run in mode interactive (then disconnect from it) if my PC and the cRIO were connected by a crossover cable, and both have been using link-local addressing.  In this way, I could get my project running every time.  When I later tried connecting via the network, it is when same interactive mode would fail most of the time.

  Unfortunately, a mini-project, I created to test this situation was not the issue - it could not run (if I built the RT build by setting the IP address of the target to an imaginary device) or ran very well (if I put the address IP target correctly prior to construction), but never caused the cRIO enter Safe Mode.

  What I want to know is, can be an option somewhere to make all default DRVS for the target Relative to the reference Mode?  I have not yet used an intentionally used this absolute addressing.  I also recommend to the reference on the NSV Mode indicator something more obvious than a tiny symbol OR in the lower left corner.

  Thank you

  Erik

  P.S. I created a support for this request and the console log provided to support engineer if this is useful.

• can I submit a webworks App (blackberry 10) for approval, but only tested in the emulator in the vm player?

  can I submit a webworks App (blackberry 10) for approval, but only tested in emulator in the drive of the VM, since I don't have any blackberry Device?

  where to find the differences between the web of BB and phonegap works,... preparation & submission?

  Or otherwise if I have a html5/css3/js/jQmobile approx... How loan submit? Android App Phonegap already submitted in the game of Google... but as I see there are differences between the BB web works and phonegap.

  We understand that not all developers have access to a physical device, which is the Simulator comes in. The Simulator you usually gives a good idea of how your application will run on a physical device, and you can absolutely submit this application for review of the BlackBerry World. If problems arise, the BlackBerry World team will let you know of those that need to be corrected before the application can be approved for sale.

  This is true for WebWorks, Android, etc. The BlackBerry World team reviews your application and provide feedback if there are all the important issues which seem to be broken. If you have tested the application elsewhere however, generally you should not be from.

• HP 8600; Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Contact HP support.
  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=8600#n251

• CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

  CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

  There are major problems with this page as shown in the screenshot below.

  

  This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout.  This isn't what APDivs were intended.  That's why Adobe them removed from DW.  Unfortunately, not soon enough.

  I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

  Either way, Flash is dead now.  Most of the people cannot display Flash media more.  You can convert the HTML5 video or use YouTube to host videos now.

  Nancy O.

• Satellite A210-17I extinguished but battery led amber goes when reconnected AC

  I've seen a few discussions on the batteries is discharged quickly.
  To be honest, when my Satellite A210-17I is on batteries, they last for 1 hour + / 15 min and recharge relatively fast.

  The strange thing is when I worked on AC and stop and unplug all night, I always find the battery when connecting to Acre the next orange light.

  It happened when I had only Vista as well as now with only XP in the boot menu (Vista still not deleted).
  I have no alarm clock apps in the start menu and could not understand what Windows or Toshiba apps should force the laptop to wake up while it is turned off.

  Someone at - he a clue, any similar experiences, comments?

  Thank you.

  Hello

  Sorry, but I could t find problems with your laptop.
  Is that battery working time depends on the use of the laptop.
  I have an A210 with an AMD processor and my battery out lasts for about 1 hour 20 minutes using only internet Explorer.
  The point is that all parts high performance like CPU and GPU ATI needs and wastes a lot of energy when running it only with the battery.

  > The strange thing is when I worked on AC and stop and unplug all night, I always find the battery when connecting to Acre the next orange light.
  It is perhaps strange to you, but this is normal behavior for laptop.
  A wake on LAN (WOL) function could be the reason for the flow of this power.

  Check this doc from Toshiba:
  [Battery draining 15-20% when it is turned off during the night | http://aps2.toshiba-tro.de/kb0/TSB6B01N50013R01.htm]

  On the other hand, the battery still loses 2-4% of the power. Also if the WOL function would be disabled.
  There is also an interesting Toshiba doc who could confirm.
  [My unit loses 2-4% battery by turning the device off then turn it back on. | http://APS2.Toshiba-tro.de/KB0/TSB6B01MY000WR01.htm]

  See you soon

• HP 15 r-031tu notebook AC do not recognize when, but battery when the costs

  Hello

  I bought this HP 15 laptop r-031tu about a month ago and I have some very strange power problems:

  1 AC plugged in, with battery - battery recharges correctly when the laptop is turned off (LED: solid orange light), but doesn't recognize is no AC when the laptop is turned on (LED: solid white light). Status icon still shows just remaining battery power as if the AC isn't there (and not the "plugged in, not load" case);

  2 AC connected, no battery - cell fuels

  3 AC unplugged with battery - laptop runs correctly on the battery (no light).

  Also, whenever I plug the AC with the laptop running on battery power, the display flashes and the HQ icon changes in "charge" for 1 second and then she goes back to battery mode.

  I tried a lot of solutions found on the forum, including the update of the BIOS, hard closed, using other adapters etc but none of these solutions work.

  Before you take this phone to the service center HP is there anything else I can try?

  Thank you!

  All tried, but failed, so I took the phone to the service center and fixed it. The answer:

  Problem was caused by something dirty inside the power supply! They cleaned for me and now the laptop is perfectly supported. Kudos for the effort tho!

• No sound when guitar hung on the macbook air.  entrance monitoring, on strong connections.  Speakers as microphones, strangely, but nothing straightens guitar sound.

  Hi all

  I'm operating out of a brand new MacBook Air.  I tried to interfacing with 2 separate 3.5 mm adapters, but also a USB adapter without success.  I have followed input turned on and I am getting no sound what so ever of the guitar.  Strangely, my speakers seem to act like microphones when I am connected, but nothing is to recognize that a guitar is plugged.

  Very simple configuration.  The Paul > electric guitar string > guitar string 1/4 in an adapter of > 3.5 mm 3.5 mm adapter into the headphone jack of the computer (also tried USB adapter) > choose the guitar/bass track (also tried audio) > select input 1 (or USB) > monitoring of activated entry = absolutely no sound guitar!

  Any guidance here will be very appreciated.

  Thank you!

  The headphone jack is an exit, not an entrance and the USB is a digital input, your Les Paul is not digital, so that all the senses.

  Get a USB preamp for guitar, connect through that.

  Nice axis incidentally.

• E8C34UA #ABA - Split X 2: Split HP X 2 - 2 plugged but battery does not charge

  Hello, I have a HP divided X 2 model number E8C34UA #ABA. I keep having a problem that says battery plugged 2 but not supported or 2 Bttery undetected. I see that other users of Split X 2 have the same Botr question, this issue has not been resolved. Any help would be appreciated.

  I was contacted by a case manager HP on the problems I've had. Even if my product is out of warranty, HP gave me a discount on the repair. They have replaced the battery inside the docking station and fixed another issue. I must say that I am very happy with HP and their representatives and will remain a loyal customer.

• Clock loses time to computer HP G62 laptop but battery OK

  Clock keeps losing time. All messages say that the battery must be faulty, but when I run the battery (with or without the external power supply) check the status is always good. What is the reliability is the battery check and he would take the flaws at the origin of the problem of clock?

  Otherwise the overall performance of the battery on the laptop does not have seriously deteriorated since the problem of clock started.

  I would be grateful for any help.

  Hi Tony,.

  The battery you need to replace is the RTC (CMOS) battery - the procedure to replace that is detailed from Page 51 in your & Maintenance Guide.

  The replacement battery, you need is almost certainly a cr2032 (but controlling one of you remove) which is easily available at any PC shop / electric - an example of this battery can be seen here.

  Kind regards

  DP - K