Support SSHv2 matrix

Similar Questions

• Difficulty to install Windows XP because of the missing HARD drive driver

  Hello

  I recently bought a P200-1 and I try to install Windows XP instead of Vista.
  I bought Windows XP Home Edition. Installation was first arrested for lack of HARD disk drive.
  Classic message: «Setup didn't find any hard drives installed in your computer»
  I downloaded Toshiba support "Intel Matrix Storage Manager" (pilot: ICH8M_32bits).

  The contents of this directory was extracted to the root of a disk.
  I restart my PC with XP CD-Rom and floppy drive connected. Setup download SATA AHCI floppy driver (press F6, and then later S key).
  The installer can read disks and partitions and offers the choice of a partition for the installation of XP system.

  After you have selected a partition, the installation begins and the installation program asks to insert "Intel Matrix Storage Manager" in drive A.
  Here's the problem: floppy drive not responding, disk is not read and XP installation stops.
  Ask for a second time to insert the floppy is suspect because he thought the driver drive HARD has already been read successfully.

  What can I do now?

  Thank you for your help

  JR

  Hello

  The problem might be that you have formatted the HARD drive (partition) or created a new partition after the installation of the Intel Matrix Storage Manager.
  In this case the formatting removes the driver from the HARD drive.

  Another possibility is the use of software called nLite. This software allows to include the SATA driver in the XP installation CD.

  Simply search for nLite and you will get lots of useful details.

  Greetings and good luck

• Generate ACS V 4.1.1 23 aging via SSH password does not work.

  Hello, my name is Elias and I have problems with ACS via SSH password aging does not work and there is no meseges password sent by ACS console when I use SSH from aging. I know that there are problems with this, but I can't find any workaround or documentation that says that there is no workaroun. Can you help me with this?

  Greetings from the King.

  Hey Elias,.

  SSHv1 does not support the password as you can do in telnet. You must be

  running a version of the IOS which supports SSHv2.

  The following site explains which versions support this:

  http://www.Cisco.com/en/us/partner/products/SW/iosswrel/ps5207/products_feat

  ure_guide09186a00802045dc.html

  Rgds,

  somishra

• Telepresence system questions

  Dear all

  I IX5000, MX 800, call control system (see the table below), 410 MCU, addition of license for CUCM 9.x/10.x, 14.X and TMS BE 7000 QTY: 2 with Hyper ver 5.X

  My Questions are:

  (1) concerning the call in the table control system, I think it's a fast track, need to install software E-Highway and Express-C track or all I need just install Expressway-E?

  (2) unit that will fit with CUCM and how it will be, trunk or there are in addition to the configurations are needed?

  (3) concerning MSDS server, what configuration I'll choose Provisioning or others?

  (4) regarding the IX5000 and 800 MX, it will record in CUCM, right? CUCM has IX5000 and MX800?

  (3) call control system
  LIC-EXP-GW	Turn on GW (SIP-H323)
  LIC-EXP-AN	Enable the Advanced Networking Option
  LIC-EXP-E	Activate the Expressway-E feature set
  LIC-EXP-SERIES	Turn on the game series features Expressway
  LIC-EXP-TOUR	Turn on relay TOWER
  LIC-SW-EXP-K9	License software encrypted key
  LIC-EXP-E-PAK	Lane Express series, Expressway-PARISI
  EXPWY-VE-E-K9	Cisco Expressway-E Server, Virtual Edition
  EXPWY-VE-C-K9	Cisco Expressway-C Server, Virtual Edition
  SW-EXP-8. X K9	Software image for highway with encryption, Version X 8
  LIC-EXP-RMS	Rich Media Express session

  I thank.

  (1) concerning the call in the table control system, I think it's a fast track, need to install software E-Highway and Express-C track or all I need just install Expressway-E?

  -You need two motorways (C & E) to work in the solution. The two boxes are part of the infrastructure of collaborative Edge and the solution will not work if a box is missing. Edge of collaboration (Expressway Core + Edge) are part of the environment of CUCM mobile and remote access and management of B2B calls.

  (2) unit that will fit with CUCM and how it will be, trunk or there are in addition to the configurations are needed?

  -Track Express Core will be interfaced with CUCM via SIP trunk. And when you enable mobile access and remote (ARM) and B2B calls, you must create 2 separate crossing (ARM 1) areas and 1 for B2B on Core (traversal customer) Expressway and the highway (crossing server).

  Here are the guides of good deployment:

  For Mobile and remote access with the B2B deployment guide:

  http://www.Cisco.com/c/dam/en/us/TD/docs/solutions/CVD/collaboration/Midmarket/Oct2015/CVD-CollabEdgeUsingBE6000.PDF

  For the Mobile deployment and remote only access:

  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/Expressway/config_guide/x8-7/mobile-remote-access-via-Expressway-deployment-guide-x8-7.PDF

  (3) concerning MSDS server, what configuration I'll choose Provisioning or others?

  -Can you clarify what you want to achieve in the deployment of the TMS? Planning/Booking? Phone book?

  (4) regarding the IX5000 and 800 MX, it will record in CUCM, right? CUCM has IX5000 and MX800?

  -Depending on your BOM and licenses, the solution is a highway. The highway do not support records. All the video end points will record on the CUCM. Endpoints immersive (IX500) and a versatile video endpoints (MX800) are supported in CUCM and will be managed these endpoints for the call control points.

  Please refer to the compatibility CUCM for supported devices matrix:

  http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix_chapter_00.html

  Kind regards

  Acevirgil

  Please indicate or mark as correct answer if this post is useful.

• Certification of form 12 c Navigator

  Hey,.

  We are looking for install Oracle Forms 12 c on a box of Microsoft Windows 2012 r2 . When we look at what browsers are certified, I found mixed results.

  Outcome 1:

  When you use the matrix certification from the following link, I see the following browsers being certified.

  

  Oracle Fusion Middleware taken supported system Configurations

  Result 2:

  When you use the My Oracle Support certification matrix, I see that Safari 8.* being certified for Windows 2012 r2.

  

  But if I look at the matrix certification of the My Oracle Support for Windows 2012 (NOT r2) then I see more than one of the above browsers.

  

  Question:

  Which is correct? What browsers are certified in fact on my box of r2 Windows 2012?

  The worksheet is accurate data.  There is a known issue in MOS that is currently under review.

• Import workspace Document-Script error

  Hi all

  We faced to the workspace under question.

  Error: could not detect the Version of the browser

  Support matrix - supported platforms matrix - Oracle Enterprise Performance Management System

  

  Please not it's only limited to IE11 support, it should be + 11.1.2.3.500 and Enterprise Mode and it is limited help to check the support doc:

  Policy to support the EPM 11.1.2.2.500 system and 11.1.2.3.500 with Internet Explorer 11 (IE11) (Doc ID 1920566.1)

  See you soon

  John

• VMWare ESXi6 standard ISO vs VMWare ISO customized for HP

  Hello

  One of my clients uses VMware ESXi 5.5 on their HP BL465c Gen7. They have no driver problems.

  Now, as they migrate to the ESXi6, they think its OK to go with as before ISO instead of the one customized for HP servers.

  Anyone could shed some light on this.

  I guess it worked because the server was in ESXi HCL.

  Is there something beyond pilots to use ISO standard HP.

  What is VMware recommendation when it come to support.

  Kind regards

  MJTS.

  Hello

  Yes, go with the RESUME on ISO measure as Hardware drivers and firmware are interdependent with OS ESXi and secondly if you try to upgrade the ESXi then yes HP image will be more advantageous in regards to the latest firmware and drivers.

  Looking for a support point of view, I guess that HP has a tie with VMware on racks if necessary, or else you can get direct support two vendors too.

  You can download the Image--> Download VMware vSphere

  You can consult the HP VMware's Certification and Support--> compatibility matrix | HP®

• Reports of Oracle 11 g Universal install does not start

  Hello

  I try to install reports Oracle 11 g R2 (11.1.2.0.0) on a Win 7 64 bit desktop. I followed all the instructions for the installation begins with the installation of java jdk 7_45. The WLS server has been installed without any problem also (WLS1036_generic.jar for 64-bit). When I go in the folder of disk 1 of Oracle reports install files and click on Setup.exe, a command window opens with the following message:

  Claiming Universal Oracle install...

  Check the swap space: must be greater than 500 MB. Real 4962 MB passed

  Monitor: must be configured to display at least 256 colors greater than 256. 4294967296 real past

  Preparations for the launch of Oracle Universal Installer from C:\Windows\Temp\OraInstall112013-11-15_08-29-42AM. Please wait...

  The command window gets stuck here and no installation window is launched. Others followed the same process, but had an installation window open. Everyone knows about this issue or to know what measures to take in order to remedy?

  Thank you!

  Oracle Forms and reports 11.1.2.0.0 is not supported with Java JDK 7 according to the matrix certification Oracle Support: http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-11gr2certmatrix-519680.xls

  It's specific to a reason why you use version 11.1.2.0.0 more precisely? If you're looking for the latest version of reports and forms Oracle 11 GR 2 (if you are working with forms, reports, or both), exists in version 11.1.2.1.0, which is the latest version available and contains the latest patches to the patch. You can find the download at the Oracle's Web site: http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html

  You can use JDK with forms/States 11.1.2.1.0 7u45 because it is supported by Oracle Support certification matrix for 11.1.2.1.0: http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-111210certmatrix-1886127.xls

  In addition, you can always use WebLogic 10.3.6 as it is supported with forms and 11.1.2.1.0 States.

  NOTE: When you start the setup.exe to install forms and reports 11 GR 2, I highly recommend right-click on setup.exe, then select "Run as Administrator". You must have administrator privileges to install the software.

  Thank you

  Scott (PITS)

• Hyperion 11.1.2.3 compatibility with Oracle 12 c

  Greetings,

  We intend to move to Hyperion planning 11.1.2.3. We also plan to improve our database of Oracle 11 g in Oracle 12 c. Are there compatibility issues of Hyperion 11.1.2.3 with DB Oracle 12 C?

  Support matrix > supported platforms matrix - Oracle Enterprise Performance Management System

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• driver configuration problem

  Hi experts,
  
  Need your help once more :-)
  
  I tried to configure the SQL interface and I was getting an error * 1021001 unable to establish connection * when I created the data source, it shows very well, however, when I create a rule file or export data, I get this error msg.
  
  I have checked the support both matrix and uses the right.
  
  Any help would be much appreciated.
  
  Thanks in advance

  Didn't know that! Second thing about SQL load rules I learned from the forum during the two weeks (the first was the thing of Glenn using a variable substitution as a list of dynamic fields in the SELECT clause).

• RightManagement brief political

  Already install RightManagement (trial) and try to understand how it can be useful in my case.

  I created a simple strategy that allows you to access the contents of pdf and encrypt pdf on this subject.

  First thing I can't do is how to enable the preview of the contents of pdf using browsers different files (windows, mac ifinder Explorer) (even when used an anonymous user).

  In addition, one more problem. I can't seem how to assign to politics. When I create new policy and you are trying to add users - find users or groups is empty

  Use the correct version of Adobe Reader such as mentioned in the supported platform matrix. Do you use also, no need to explicitly add the field of strategy, to find users and groups:

  

  -Wasil

• 64 bit Hyperion workspace and financial information

  We found 64-bit version of Hyperion Planning available for download at edelivery.oracle.com. However, we are not sure if there is a Hyperion 64bits version workspace and financial information. Has anyone tried 64-bit before?
  
  Thanks in advance!

  Hello

  Have you had a glance to the supported platform matrix, it appears each o/s and what products work on 32/64 bit.
  http://www.Oracle.com/technology/products/bi/Hyperion-supported-platforms.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Oracle ATG Commerce 11.2 Matrix support environment

  Hello

  is someone can you please let me know the supported Oracle ATG Commerce 11.2 Matrix environment?

  Thanks in advance,

  Hello

  PFB environment details supported for version ATG11.2: -.

  JDK:1.7.0_80 (64-bit), 1.8.0_60 (64-bit)

  JBoss version: 6.1.0 EAP, EAP 6.4.0

  Oracle db version: 12 c (12.1.x), 22 (RAC 12.1.x) 12 c, 12 c (12.1.x), gR 11, 2 (11.2.0.x CARS), gR 11, 2 (11.2.0.x)

  And for the short versions:

  * Oracle short MDEX engine 6.4.1

  * Oracle short platform Services 6.1.3

  * Oracle short tools and frameworks 3.1.2

  Kind regards

  Prateek Gupta

• Reference Dell R710 - Perc 6 / disc matrix (support 4 TB?), I supported

  Hi all

  Since then, we want to upgrade the hard drive 2 TB (3.5 inches) for a large as 3/4 to.
  Is there information on the matrix of disc official supported of PERC 6 / i?

  We use Seagate 2 TB 72kRPM (bought from Dell) on our R710 servers. If the PERC 6 / I can't stand 3 to/4 TB disk. Is it possible to order the H700 support 4 TB drive adapter?

  We have installed the latest firmware /bios,
  -Perc 6/i: 6.3.3 - 0002, A-00
  -System BIOS: 6.4.0

  Thank you and best regards,
  Caleb Wong

  PERC 6 does not support disks larger than 2 TB. The H700 is supported in the R710 and supports disks larger than 2 TB. I would not, however, use desktop or NAS drives.

• Replication ODSEE support matrix

  Hi experts,
  There is a matrix of replication support? I need to know if multiple master replication between Department 6.x and ODSEE 11 g is supported...
  Thank you very much.

  Yes it is supported.
  See http://docs.oracle.com/cd/E20295_01/html/821-1220/bcasa.html#scrolltoc

  -Sylvain