17 '' with space for 2 HDD laptop

Similar Questions

• Cannot send messages from desktop (Windows Vista) with wire for modem or laptop (Windows 10) wireless, but can read the new email (Thunderbird) on both computers.

  (1) changed modem Internet 2016-11-12 (used by two computers), but also later than 15 messages sent on the desktop (Vista & wired) but nothing impossible to send the 2016-11-16 or later. The 5.7.1 error message is received and no e-mail message was added to the list "sent". (2) equivalent (on Windows Mobile with Wi - Fi 10) has been effective on 2016-11-16 (with no attempt sends on 14 or 15) but the 16 message showed on the list "sent". Next attempt on the 18th with the same message (updated and transmitted the message with more information), stopped with the 5.7.1. error message and did not appear on the list "sent". 3) denied computers their respective messages with the message: "an error has occurred when sending mail. The mail server responded: 5.7.1 address unauthorized. Please verify that your email address is correct in your account settings and try again. (' 4) no changes have been made between sends with success and failure sends with 5.7.1. messages.

  Your ISP may have changed, how they want you to send your outgoing emails. ISP does not necessarily tell their customers when they make changes like this.

  Discover on site from your ISP, or you can call to make sure that your e-mail server settings are correct. Be thorough and check the incoming (IMAP or POP) and outgoing (SMTP).

  Thunderbird menu: Tools: account settings

  -It just occurred to me (at the end), to ask if the e-mail address you have in the section 'From' of your email is a valid e-mail address and that of your ISP provided you.

• How do I pair for windows 10 laptop via bluetooth with the iphone 6

  How do I pair 6 + for windows 10 laptop via bluetooth with the iphone?

  You do not have. This isn't a feature of iOS. It has never been.

• Cannot find a volume with sufficient space for the extraction of the file, trying to watch a movie on netflix with Silverlight plug-in

  Install the Microsoft silverlight plug in. it's necessary to watch movies on my vista computer. When I try it is the message I get. Cannot find a volume with enough disk space for the file extraction. This is the message I get trying to watch a movie on netflix.

  Hi cardsharkha,

  I suggest you try the steps mentioned in the link below for cleaning broken Silverlight installation and check if the problem persists

  How to manually clean a broken Silverlight installation

  http://blogs.msdn.com/b/rpomeroy/archive/2008/06/10/how-to-manually-clean-up-a-bad-Silverlight-installation.aspx

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I create system recovery disc for a new laptop with windows 7 Home Premium?

  I just bought my daughter a new Toshiba Satellite with Windows 7 Home Premium laptop last night. The laptop came with a Windows restore disk. How to create a set of boot from the DVD then when the system fails, or I need a new facility? I created a system repair disc and two-disc Image recovery. Is this enough to fully restore Windows 7 to the initial state of machines? (Technology at best buy assured me that it was nothing that I was able to do and that they would do for me for $70.00.)

  In short: my Dell came with a system recovery disk which was very convenient. I would like to reproduce this convenience with Windows 7. Any help appreciated.

  Jim

  You will need to follow the manufacturers directions to create the recovery media. Looks like you've done that, but Toshiba could only say with certainty. I recommend that you contact their customer service.
  Kerry Brown MS - MVP - Windows desktop experience

• Hi, my old G5 died and now I need to download the version CS3 average Easrtern - my new Macook has no space for a CD. I have all my serial numbers. I was with the cat for hours - they sent me a link - but when I open the program - all the Hebrew has been

  Hi, my old G5 died and now I need to download the version CS3 average Easrtern - my new Macook has no space for a CD. I have all my serial numbers. I was with the cat for hours - they sent me a link - but when I open the program - all the Hebrew was reversed. I need to ME version. Where should I go?  MANY thanks, Naomi

  The latest product from Adobe's creative cloud that we create no more any version of Creative Suite.

  You can check the availability of creative cloud subscriptions in your country from here: https://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-matrix.pdf

  Purchase at: pricing and membership creative cloud plans | Adobe Creative Cloud

  Also see, modify the language setting for Adobe Creative Cloud applications

  Let us know if that helps.

• Síntax liquid for webapps fields with spaces

  Silly question I am stock with.

  How we make in a video collection called a field named as 'Youtube Id' {{video.items. ["YouTube Id'] | JSON}} does not work...

  Thank you

  Hi, Machinette

  While using the code {{this.video.items [0].}} ["YouTube Id'] | JSON}} you access the array element, so that everything will work fine, however if you want to display all items from webapp 'Youtube Id' field then the best option is to use the for loop.

  Example: {module_webapps id = "1223" filter = "all" collection model = "webcall" = ""} / / I have collected all the data of webapp id 123 to collection webcall

  This webapp now have the name of the 'Number of tickets' field (with spaces).

  To display all the data in the 'Number of tickets' field, we can run a forloop as below

  {% for items in webcall.items %}

  {{Items. ["Ticket number"]}}

  {% endfor %}

  This will display all the items in the "Ticket number" field.

  I also created a test page: test of liquid

• When you try to install Acrobat 9 Standard to my HD Setup outboard seems stuck on C:\ and I can't move on a disk with enough space for the installation.  What can I do?

  When you try to install Acrobat 9 Standard to my HD Setup outboard seems stuck on C:\ and I can't move on a disk with enough space for the installation.  What can I do?

  You will need a bigger c. For everything that you can move there will be 10 things, you can't. Software installation puts the huge amounts of information in the Windows Installer on C database.

• Problems with drivers for laptop HP650

  Hello

  I have a problem with drivers for this model.
  I have installed windows 7 32 bit, then removed all the drivers from the official website of HP, but a problem with the two drivers, PCI SIMPLE COMMUNICATIONS CONTROLLER and CONTROLLER ASSISTED, now I can't connect to Internet, LAN or wireless internet.

  Is there a solution?

  

  Hello:

  This is the driver you need for the PCI SCC.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5225011&prodNameId=5225013&swEnvOID=4062&swLang=13&mode=2&taskId=135&swItem=ob-104656-1

  In order to find the right driver for the wireless card (since there may be one of several different model wireless cards in your notebook), go to Device Manager and click on the network controller needing drivers and display the material for her ID.

  If you don't know how to find the hardware ID, please read the info on the link below:

  http://www.DeviceDriverFinder.com/blog/device-drivers/how-to-check-the-hardware-ID-for-a-Windows-device

• Problem with m230: not enough space for music DB. Please free 8 MB.

  OK, so. Hi, I'm new in this forum.

  Then.  I wanted to listen to music. SanDisk initialize arrived, then the 512 MB Sansa m230 and then the error:

  Not enough space for music DB. Please free 8 MB.

  And then you can see: no files 0/0. And the battery is fully charged. I thought that the...

  So I decided to connect m230 to my computer. First initialization, then the error came, had to wait a bit and then... the Sansa screen shows:

  USB connected MTP (and this popped into my computer: http://i30.tinypic.com/2i9jo82.png)

  Then. I open Sansa m230 in my computer and the folder that I saw was: RECORDING

  Well... I'm sure many of you could suggest me to format or reset. But... There is a problem:

  Where is the format button? (http://i31.tinypic.com/dvoky9.png)

  Then. I tried to format it in computer management. Device Manager > portable devices >
  Sansa m230. But... where is the format? (http://i31.tinypic.com/10x7q06.png)

  I went through a few topics, and someone suggested to format under removable storage, but there is no m230.

  Then I thought that I try the FirmWare update. But... the error popped up:

  The following error occurred: your device is in MTP mode. It can only be updated in MSC mode. Please disconnect your device and switch to MSC mode if you want to check the updates.

  But good... How can I change the mode MSC, coz... If I press the menu button on my m230, always pops up an error:

  Not enough space for music DB. Please free 8 MB. I can't do nothing in the menus. Aaand by the way, I have this player mp3 more than a year, so there is no guarantee or something for me I guess.

  Then. is there a way to do the hard reset or something? Is there a way to fix my m230? Feel free to ask me questions. I would be very happy if you answer.

  Aaand... Sorry for my English. I'm not from English speaking countries

  All the best,

  MagicIsland

  Hello MagicIsland, you may need to format your device, but it will delete everything on your player to try to see if you can always save the files when you connect your device by following these steps.

  http://KB.SanDisk.com/app/answers/detail/A_ID/1/kW/not%20enough%20space%20For%20Music%20dB%20error%20For%20m200/r_id/101834

  hope this work

• Satellite A200-1 g (PSAECE) Win XP. Need drivers for SATA HDD and GeForce 7300

  Hi all.
  I would install XP instead of Vista on my note. As far as I know, XP has no builtin for SATA driver. I found no drivers for GeForce 7300 on the toshiba Web site. So I need drivers for SATA HDD and GeForce 7300. Where can I find them?
  Thank you.

  Hello

  Why must you SATA XP drivers? You are not able to install XP because the HARD drive is not visible?

  With regard to the nVidia drivers:
  It seems that the A200 notebooks were shipped with a different hardware configuration.
  Some laptops come with the Intel GPU and some with nVidia graphics card.
  The Intel GPU driver is available on the Toshiba page.

  Graphic driver nVidia can be downloaded from the site Web of Toshiba Canada or 3rd sites like www.omegadrivers.net or www.laptopvideo2go.com

  See you soon

• Basic necessary for SSD + HDD Setup assistance

  Hello

  I know that this topic probably has to be put to death, but more I'm looking more confused I get.  I'm a total noob to the time modern PC s Please treat me like a fool in this regard :)

  I get a new rig built for me, especially for games. It includes Win 7 Home Premium 64-bit, an SSD 120 GB drive (which will be installed with OS startup disk) and a 1 TB WD Black HDD.  I intend to put some games on the SSD and everything else on the disk drive HARD (music, movies, documents, other games, etc etc).  Of course I have not yet, but basically I'm trying to anticipate the inevitable backups and partitioning issue when I get back to the computer.

  I understand that following the instructions on the installation of Win 7 with regard to the choice of the backup drives and create partitions etc should be simple enough.  What I am unclear of is as follows:

  To create a partition on my SSD and HARD drive?  If so the size should be partitions for each?

  * When creating partitions for backup, should there be that a single backup partition and this partition should be large enough to hold the combined SSD and HDD data or are they mainly just for backup OS and important documents?  I saw a tutorial here on how to include more than one disk in the backup process, so I think I can handle this quite well if necessary.  Of course, I'm hoping to have the backup partition on the HARD drive has a lot more space for him.

  * Is there an advantage in the creation of partitions/disks for specific things (one for the games, one for multimedia, documents, etc.) or is it OK to lump most of it in a player?

  One of my main concerns is the right balance with regard to the partition backup size/quantity: I don't want to put too much memory for what could possibly leave me short, nor do I want to find my backup partition/s are not large enough to hold whatever it takes.

  I will leave that for the moment, thanks in advance for your patience.  As I said, I checked these forums for the info I get but I just more confused and end with more questions than answers accordingly.

  Through the information provided in the links. This will permanently delete your doubts

  http://www.StorageReview.com/ssd_vs_hdd

  http://www.computerhope.com/jargon/s/SSD.htm

  http://SearchStorage.TechTarget.com/definition/hybrid-hard-drive

• Partitioning hard drive, I want to spend 30/40 GB drive and the remaining space for the creation of other partitions.

  I created a recovery disc for my system that I bought the new laptop.
  It consist of 500 GB HARD drive, now the problem is the C - drive which is my WIN7 Home Basic installed occupies 400 GB of space and the D-drive has only 25 GB.
  My problem is I want to partition the drive C so that the other player must occupy the space according to my condition.
  But here its only gives me half the space to shrink.
  I mean, when I opened diskmgmt to shrink, C this is 200 GB disk space allotted to me.
  Medium I can use this space to create other partitions, but what I want is, I want to spend 30/40 GB C drive and the remaining space for the creation of other partitions.
  Help, please... Thnks...

  That's what we tried to tell you. An OEM installation does not lend itself to change and having to clear guarantees for re-setup means that you must be quite certain that you have other reliable ways to re-setup.

  If you want to dabble with Linux or dual boot, you should buy a complete commercial edition of Windows 7 that will give you more flexibility and accept that for drivers etc, you're on your own...

• DV7-3010so BIOS support for 2nd HDD

  I plan to install a second hdd in my PC for entertainment of W7 (1 320 GB SATA HARD drive) and I found a shopping cart, the drive I have is 9.5 mm thick and there is a unit of 750Go with the same thickness.

  My question is: the BIOS will recognize a 750 GB drive?

  Previous books I had been strangled so that it was not possible to install much larger disks.

  Yes the BIOS will be no problem. The 750 GB drive will function as a treat. SATA drives are not BIOS limited size as we do with IDE drives. Your laptop last must have been at the time of Windows 2000 since XP Service Pack 2 and Pentium 4 processors (2002-3 or almost) even the IDE drives have used big block (48-bit) and it was not really a limit of size of hard drive, but I'm old enough to remember when 512 megs, and 8.4 GB then 32 concerts then 123 concerts was the insurmountable obstacle.

• Can I use my 27 "IMac as a monitor for my Windows laptop

  Hello

  I want to use my iMac 27 "(fin 2012) as an external monitor for my Windows laptop." On my laptop, I have a miniDisplay port and on my iMac, I have a Thunderbolt connection.

  Is it posible to connect between them, or is it only possible to connect to apple to apple...

  Wouter gr.

  Read carefully > use your iMac as a display with the target - Apple Support Display Mode

  Some of them indicated that they were able to make a PC work, but only if the PC has a video card with Mini DisplayPort connector on set that meets the requirements of CT. > http://science.opposingviews.com/use-imac-pc-monitor-9320.html