Satellite C870-1J6 wired LAN DHCP problems

Similar Questions

• Satellite C870 - sound quality & Bluetooth connection problem

  C870 satellite.

  (1) problems with Bluetooth - machine could not find other peripheral and there were communications problems;

  (2) I am very, very disappointed by the quality of the sound. The speakers are very poor. If I had known I wouldn't n buy it! Unfortunately, I have not had a chance to check it out and assumed Toshiba will keep minimum standards in this area.
  In the past (a few years ago)

  I used PC Toshiba laptop and it was OK.
  To be honest, I bought for this calculated because of my good experience of the past, but will be more careful in the future.

  Now I have to life with her in the past 800US.
  The rest is OK - for now.

  > 1) issues with Bluetooth - machine could not find other devices and there are communication problems;

  What Satellite C870-xxx you have exactly?
  From my own experience, some models support BT and some don t so probably your device does support BT or you have done something wrong then that configuration of BT.

  (> 2) I am very, very disappointed by the quality of the sound. The speakers are very poor. If I had known I wouldn't n buy it! Unfortunately, I have not had a chance to check it out and assumed Toshiba will keep minimum standards in this area. In the past (a few years ago)

  My own different models of knowledge supports different hardware specifications. You can buy models of laptops with Harman-Kardon speakers that offer the best sound quality. This device seems to support standard speakers.
  So it s always a question of value for money and in my opinion it is not too bad.

• Re: Satellite C870-1J6-Win8 freezes

  Hello world

  My Satellite sometimes "freezes" that gets pretty boring. It has been done from the very beginning and the moments seem random. Weither I am using chrome or typing in word does not really matter. I'm running on windows 8 and could not find anything in the previous posts so thought I would ask...

  Any thoughts anyone?

  Best regards

  It freezes for a short period of time or completely if you need to restart your laptop?

  You know that's not easy to talk about problems that occur

• 1DX / Windows 10 wired LAN pairing problems

  Since I updated to Windows 10 I can't my LAN WFT matching to work with my 1Dx.

  There is no report error code. After having reached the matching point in the Connection Wizard, the camera keeps trying to connect but never does.

  I tried to use the settings manual, but quickly realized I don't know what I'm doing.

  I think that maybe some Windows features necessary to achieve needs matches to be turned on manually - I know that the FTP server components are not installed by default.

  Of course, it's a major disaster, I like to use this technology and it has been one of the main points of sale of the camera for me.

  Any help much appreciated.

  OK, so it works 100% now. I was convinced that it was stable enough to use the EOS utility with a customer today and it didn't let me down. LAN high speed transfer all the way.

  Here are the settings I changed to get the camera to connect:

  -In the network and Internet / network and sharing Center / Advanced active profile sharing settings / private, I turned on the network discovery and automatic configuration of connected devices

  -In the Windows Firewall, I turned on permissions for EOS Utility 3 and Canon EOS UPNP detector in bot profiles private and pubic.

  It took a bit of trial and error but I am happy to have the operation of the system.

  For the guy Canon CPS who kept going on the FTP mode and how I should contact Microsoft (and soon to be Googling this page every day that people update Win10): you're welcome.

• Problem with my Satellite C870

  I have a problem with my toshiba satellite C870. The noise stopped working. the sound icon is cut and I got a message: no speakers or headset is connected. I tried corrections but I thought that my driver is up to date. For accuracy I am under W7. Sorry if my English is bad (I speak french, but you can answer me in English)

  Thks

  Hello

  Reach:
  Panel of-> sound-> the Read tab

  You see your speakers or headphones here?
  If so, make sure that the speakers are marked as the default device.

  In addition the combination FN + F11 would turn on and off MUTE.
  Check it!

  When two solutions of workaround don t help, uninstall the device high definition audio / controller as well as the audio driver from the Device Manager and restart the computer laptop n.
  After restarting again the system should install the uninstalled drivers even more often, this will help you to get the sound.

• Wired LAN undetected on a Satellite U940 after installing Win7 Pro

  Hello

  After replacement of the HDD in the Satellite U940-100 and the installation of win 7 Prof 64 b the wired lan device is not detected. According to the documentation, there should be a 'Fast Ethernet LAN' in the U940.

  On the Toshiba support site, there is a Realtek driver available, but no luck. During installation a message appears: Realtek network controller was not found. The network cable is plugged in, but no led indicator. On the router the giga bit led will blink.

  There is no unknown device left in the 'management of the computer--> device manager'.

  Went LAN so where? Any suggestions?

  Thanks in advance,
  Frans

  > There is no unknown device left in the 'management of the computer--> Device Manager. "
  And what is stated in the network adapters? Realtek network card is listed there?
  This is really strange.
  Try to set the BIOS to default settings and check again.

• Re: Weird sound coming from USB using the Panel mixing Audio on Satellite C870-1EX

  Hello!

  So, my sister has Satellite C870-1EX and she uses new Audio Mixer with integrated sound card sends its via USB cable to the computer (computer recognises as external audio device and map). It's the device: http://alesis.com/multimix8usbfx.

  A few weeks ago, she began to notice a very odd sound, sort of high-pitched, whistling, like a very fast electronic beep. Something similar to what good old modems of the internet when they were connected to the phone line, just not a little faster and strong.

  First of all, of course, we tested every single setting on the Audio Mixer Panel.
  Then, we got new USB cable and it traded.

  After that we also took down all the material, checked all cables, if necessary, detangle swapped the power supply, check a different recording software, even tried a few other recording devices USB etc etc.

  None of this has helped. The drivers are all there too.

  Here's the catch. I used the same equipment with the same settings on my computer and no hissing noise at all. The thing is, any parameter, we tried, only the hiss remains the same, nothing changes.

  Even if you apply a few sound effects which should either accentuate or reduce any type of noise in the signal that is sent to the USB port on the computer, this whistling noise remains the same.

  What worries me is that something is wrong with the material of my sister's laptop.

  The noise does not appear if we use, for example, microphone that uses 3, 5mm taken or the built-in microphone of the laptop during the recording of the commands in the same session with the same software and similar settings (given some must be different because of the different entry).

  However, the noise is if we use an external USB recording equipment on any of its ports.

  Windows on his laptop were resettled some time ago (now it is on Windows 7), but the problem appeared a few weeks later.
  As I said earlier, the drivers are all there and to date as well.

  So, I hope that one of you will return with a software sollution (single)... and I hope we will not need to take his computer back to the shop.

  However, as it seems now, the last is more likely to occur.
  Please, tell me I'm wrong :)

  Thank you!

  Hello

  One of my friends had a similar problem with a DJ controller: Traktor Kontrol S4
  There was not a sound, but he noticed a few dropouts stuttering and audio.

  The problem was the background processes that were open when you use the controller.
  To resolve this problem, it was necessary to disable all possible devices in the device as WLan, LAN, Bluetooth Manager, etc.
  In addition, he had to Disable Antivirus software and firewall that was running in the background.

  I put t know if it helps you, but I think that its worth a try

  Another idea: try to reduce the performance of the processor. This is possible in the Windows 7 power management.
  How to manage Windows 7 power management features
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Option CPU power management contains the option called the Maximum processor state
  Here you can set it to 90% - 80%

• Can I have 2 Airport Extreme with running in a single wired network DHCP server

  Hello friends,

  Just a teenager from the windows world crawling as a child in the MAC world.

  I'm curious to know if we can have 2 extreme airport, acting as 2 DHCP servers in the same local network. I really doubt if it is possible, but still want to have Advisor by experts. I am considering a wired LAN. If possible, please help me understand how this can be done in detail.

  Thank you.

  In fact, you can. The key is to assign different DHCP scopes for each base station in the same IP address space.

  For example, you could assign the range 10.0.1.2 through 10.0.1.99 to a base station and have the other on: 10.0.1.100 via 10.0.1.200.

  You set the DHCP scope or range using AirPort Utility, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • Select the network tab.
  • Select Network Options...
  • The range is set with the option "IPv4 DHCP Range".

  

  But the question would be why would you?

• WIRELESS and wired LAN do not know each other

  My internet provider installed a new cable modem, without capacity WIFI because I have an airport extreme base WIFI (with cable Express extensions).  Speed and quality are OK, wireless and wired, but there seems to be a wall of China between WIFI and wired (LAN): devices that are connected via a cable to my LAN are not visible from the wireless network and vice versa.  Airport extreme is not 'Bridge' mode ("because not of wireless on the new modem capability".)

  No idea of the reasons for this?  Thank you very much

  Sounds like the configuration of the device. With the airport devices it can operate as a device on the network or another firewall as its own network. I think that it is way jumpered to activate, this will allow you to configure the wireless on the airport, but your current router will do the DNS/DHCP and will be a single network.

  Now that you have configured as two routers on an independent network as there is no bridge.

• Satellite C660 - 1J6 Win7 installation failed - disk HARD disabled controller

  IV received a toshiba satellite c660-1j6.
  The problem is that the hard drive has been deleted (including the back upward). I don't have any of the Toshiba backup disks, but I have new copies of win 7 home prem and xp pro. However when I try to install win7 that I get as far as selecting the installation drive and I click on the drive and I get the message about how windows cannot be installed to this disk please check the drive controller is enabled.

  IV check the BIOS then several times and I can't find anything to do with it apart from the Mode of the SATA controller and which dose nothing.
  The Toshiba tech support when no help at all. so is locked HD or BIOS, and is it possible to unlock them so I can install the o/s?

  IV tested the drive by hooking up a PC desk top and installing windows like that, but as soon as I put the drive in the laptop it comes up with no installed new o/s

  Can anyone give any help... or even indices, iv it for a week now and im going crazy.

  Hello

  HARD drive is not locked. You can install any OS on the HARD drive.
  Usually, the Windows 7 operating system already contains the SATA drivers that are required to see the HARD drive. So it of not necessary to include the SATA drivers while installing Win 7. You said that you have a copy of Windows 7 disc. Is this an original disc for Win 7 complete with functional Microsoft?
  I ve installed several times Win 7 on my Toshiba notebooks and didn t need to use SATA drivers

  In the BIOS, you have found the SATA controller mode. This should be set to AHCI. You can change this pressing SPACE.
  But also the default BIOS settings should do the job.

• No bluetooth on Satellite C870 using OpenSuse Linux

  First of all, thanks for reading and eventually respond to this message

  I installed opensuse 12.3 x86_64 on a Toshiba Satellite C870 - 1 HR with a wifi/bluetooth adapter realtek 8723. The rtl8723ae module is running.
  Wifi works with kernel 3.10 provided by opensuse kernel team, but not the BT. bt kernel modules are loaded, kde recognizes the bt stack, but not access.

  hcitool dev
  Feature:

  and

  rfkill list
  0: hci0: Bluetooth
  Soft blocked: no
  Hard blocked: no

  However, I have discovered with dmesg:

  8.347377: HCI device and connection manager Bluetooth Initialise
  8.347389 Bluetooth: socket initialized HCI layer
  8.347391 Bluetooth: L2CAP initialized SSL
  [Bluetooth 8.347399: initialized SCO socket layer]
  8.350732 ACPI WARNING: 0 x 0000000000004040-0x000000000000405f SystemIO comes into conflict with the \_SB_ region. PCI0. SBUS. SMBI 1 (20130328/utaddress-251)
  8.350739] ACPI: If an ACPI driver is available for this device, you must use it instead of the native driver
  8.356121] usbcore: registered new interface driver btusb

  rtl8723ae 8.759901: using the rtlwifi/rtl8723fw_B.bin firmware
  8.875659 ACPI WARNING: 0 x 0000000000000428-0x000000000000042f SystemIO comes into conflict with the \PMIO region 1 (20130328/utaddress-251)
  8.875666 ACPI: If an ACPI driver is available for this device, you must use it instead of the native driver
  8.875670 ACPI WARNING: 0 x 0000000000000530-0x000000000000053f SystemIO comes into conflict with the \GPIO region 1 (20130328/utaddress-251)
  8.875674 ACPI WARNING: 0 x 0000000000000530-0x000000000000053f SystemIO comes into conflict with the \GPXX region 2 (20130328/utaddress-251)
  8.875677 ACPI: If an ACPI driver is available for this device, you must use it instead of the native driver
  8.875679 ACPI WARNING: 0 x 0000000000000500-0x000000000000052f SystemIO comes into conflict with the \GPIO region 1 (20130328/utaddress-251)
  8.875681 ACPI WARNING: 0 x 0000000000000500-0x000000000000052f SystemIO comes into conflict with the \GPXX region 2 (20130328/utaddress-251)
  8.875684 ACPI: If an ACPI driver is available for this device, you must use it instead of the native driver
  lpc_ich 8.875686: resource found on gpio_ich
  8.888936 ieee80211 phy0: rate control algorithm selected "rtl_rc".
  rtlwifi 8.889107: wireless switch is on

  Any idea?

  Hello

  Your problem is a little weird!

  Your wireless network card is a BT / WLAN combo and should be supported by the kernel used in openSuse 12.3.
  Check the functionality in Windows or any other end Linux distribution?

  I would say to download Fedora 19 and run as a direct medium OS to check the operation of BT.
  If it works fine, I belive there is a bug in the distro openSuse.
  If this isn't the case, I really think you should consider checking your hardware.

  I have the same card in my works C850 and BT just perfect in Fedora 19.

  Hope this helps you out

  Tom BR

• Update on Satellite C870-1GD display drivers

  Hey.

  I recently bought a new toshiba laptop.
  I noticed that the AMD drivers are not supported directly and I need to download from here.

  They do not seem to do the trick and I've always found these rather confusing support sites.
  If my laptop is Toshiba satellite C870-1GD (pscbce-03c004bt)
  ([Link 1 | http://www.toshiba.be/nl/laptops/satellite/c870/satellite-c870-1gd/]: Dutch)

  The Belgian driver for my mobile site gives these 2 drivers
  Intel: [link: http://www.toshiba.be/innovation/download_driver_details.jsp?LNG=10&service=BE&selC fulltext = 2 & selFamily = 2 & selSeries = 312 & selProduct = 747 3 & selShortMod = 3766 & language = 12 & selOS = 40 & selType = 11 & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & coun try = 3 & selectedLanguage = 12 & type = 11 & page = 1 & ID = 88053 DISO = 40 & driverLanguage = 42]
  AMD: [link: http://www.toshiba.be/innovation/download_driver_details.jsp?LNG=10&service=BE&selC fulltext = 2 & selFamily = 2 & selSeries = 312 & selProduct = 747 3 & selShortMod = 3766 & language = 12 & selOS = 40 & selType = 11 & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & coun try = 3 & selectedLanguage = 12 & type = 11 & page = 1 & ID = 88048 DISO = 40 & driverLanguage = 42]

  I downloaded both and featured intel should be on board. However, it does not change a thing.
  So far, I've tested League of legends; works without problem (no update necessary driver)
  But it does not even minecraft cause of no openGL acceleration. Which in my opinion is very weird

  Any suggestions?

  In your case the situation is quite clear. Your model of laptop has AMD Radeo HD 7610 M GPU inside and last supported driver is always offered on the Toshiba download page. If you have this latest version that s it.

  In any case, in the past, several people spoke of trouble with Minecraft. Put Minecraft as a search term in this forum and you will find several interesting discussions. One of them that you can read on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=282293

• Crackling on Satellite C870-198

  I just got a new Satellite C870-198 and the audio began to Crackle after about a week.

  It seems to happen with external speakers, headphones as well as with the speakers on Board (i.e. all the time). Windows 8 has been frustrating me anyway so I installed windows 7 on it, but the problem is still there.

  The cracks are more noticeable when the music I play is stronger. I tried to uninstall the sound drivers to try a few different, but they always reinstall themselves whenever I restart. I don't really know what I'm doing. Sometimes it makes a brief gurgling like electronic interference noise or something too.

  Any ideas?

  Hello

  To be honest I'm not very well if the issue you described is really a problem of laptop because you said that you've probably noticed the sound of crackling playing loud music of m.
  From my point of view, it could be a common behavior in which crisscross loud music.

  You are using Windows 7 now.
  On the page of the Toshiba UE (Satellite C870 PSCBAE) driver, you can find the audio drivers 3.
  Realtek, nVidia, SRS
  All drivers must be installed.

  In addition, you can find edge settings in Control Panel-> Realtek HD Audio Manager.
  Here, you can change the sound properties. Check it out.

• How to remove the upper part of a key on a Satellite C870-C196?

  Hello

  I would like to know if it is possible to remove the upper part of a key on a TOSHIBA Satellite C870 C196 to clean underneath?

  I have a button that does not work properly.

  How to go without anything break?

  Is there a specific tutorial for this projection keyboard how?

  Thanks to you all.

  Kind regards

  Tutorial so that it does not exist, but I can say, is that you can remove the plastic cap. It may be problematic to implement.
  On older machines, it was quite easy, but on the new laptops equipped with flat keys, it is not so easy. As far as I know that each CAP is fixed with 4 pretty small hat holders must be fixed properly. to put all the 4 instead is not so easy.

  I don't know what to say. You can try it, but on the other hand, I don't want to encourage that because you can damage something and in the end, you need to replace the entire keyboard.

  If there is a serious problem, you can request the service of Toshiba for advice and ask for help.

• Satellite 1400-103: driver LAN

  Hello

  I have a laptop of 1400-103. I read a previous post about this and I'm having the same problem. I can't find the LAN drivers, on the post I found, someone referred to in http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp so I went on this site.

  IM blind or they do not have the drivers on there: P so if someone could help I would be very gratefull.

  Post edited by: cagdasal

  Post edited by: cagdasal

  Hello

  As I remember the Satellite 1400-103 supports LAN Intel 82550 PM chip!
  I found the right drivers on the Intel page!
  Try these two:

  Intel 8255 x Ethernet controllers
  http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=997&lang=eng

  or

  Fast Intel 82550 Ethernet controller
  http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=993&lang=eng

  Good luck