2 connection of network cards

Similar Questions

• The 'Wireless Network Connection 3' network card is not properly configured to use the IP protocol

  I can't connect to any internet. I'm trying to connect to wireless hotspots, but it tells me that I am connected with limited access

  Hi idkmyname

   

  1. What is the exact error message displayed when you try to go online?
  2. do you have updated the network card drivers installed?
  3. What is the brand and model of the computer?

   

  Method 1:
  You can check the links below and check out them if the steps to help you resolve the issue-
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  You can also check the help links below-
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Method 2:
  You can follow the steps below to check the NIC in Device Manager. I suggest you to uninstall and reinstall the NIC drivers and check:

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  Check if you have any exclamation point beside the devices listed. If you have, then there is problem with the card is installed.

  c. in the NIC, expand adapter, right click on the devices listed and then click Uninstall.
  When you are prompted to confirm that you want to remove the device, click OK.

  d. restart the computer.

  After the computer restarts, the drivers will be installed automatically. Check after this procedure if you are able to get access to the network.

   

  If you get all the drivers related errors, you can check if you have the latest drivers updated, installed for the network card. See the help link - below
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  I hope this helps.

• (Problem connecting Wifi) network card drivers

  Hello!

  I got my computer laptop 15-r068no Windows 8 HP for Windows 7.

  The problem I have now is the wireless connection, I can't connect to any Wifi.

  When I look in Device Manager I see the network controller I have missing its drivers. (and the PCI device is also missing its drivers)

  Windows I'm not available to find the drivers and I can find my self...

  can someone help me? IM lost

  You are the very welcome.

  You need this card wireless driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-137990-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• Automated connection of the network card in the computer asked after that prompted Boote

  Hi Al,.

  I'm under VMWare ESXi 4 Update 1. I use a pair of firewalls Astaro Security Gateway Computers invited in HA mode on my ESXi 4. My problem is that when the two guest computers are running in HA mode, they are fine. However, when I restart one of them with its virtual NICs defined on 'Connect to the market', it is not 'sync' upward with another. Two firewalls Astaro Security Gateway have a separate NETWORK connected between them for the SYNCHRONIZATION of HA.

  However, when I uncheck the 'Connect to light' and allow the guest to start computer and then 'connect' virtual network cards, they work fine.

  Is it possible to automate the connection of the network of machines comments adapter after, say, x seconds once they are turned on?

  You can connect the network card in 60 seconds after the start of your virtual machine with the following script PowerCLI:

  # Get the VM
  $VM = Get-VM YourVMname
  
  # Get the network adapter
  $VMNetworkAdapter = $VM | Get-NetworkAdapter
  
  # Disable "Connected" and "Connect at power on" on the network adapter
  $VMNetworkAdapter | `
    Set-NetworkAdapter -StartConnected:$False -Connected:$False -Confirm:$False
  
  # Start the VM
  Start-VM -VM $VM
  
  # Wait for 60 seconds
  Start-Sleep -Seconds 60
  
  # Enable "Connected" on the network adapter
  $VMNetworkAdapter | `
    Set-NetworkAdapter -Connected:$True -Confirm:$False
  

  Robert

• 9 VMware upgraded to bu 10 no network card now (host windows 7)

  I removed 9 VMWare and then installs 10, but now I can't connect virtual network cards via the network Editor, - after having checked the connection and then apply the changes that nothing will happen. Virtual (about) unsaved changes, so not all adpaters not connect to the host.

  On this I host insttalls before VirtualBox and have to remove 2 "unknown network adapters' but VBox works after reinstall, while VMWare is not.

  I have quality solutions, but no luck yet. Here is someone who has solved the same problem?

  all network issues resolved now, thanks anyone

  I use ifcleanup.x64 for it and then deleted some unknown keys

  HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318}.

  (this is one that matches any seat NIC in the system. Registered NIC also listed by ifcleanup utility)

  VirtualBox 4.3.6 rocks now on my laptop!

• Broadcom NetXtreme II 5709 quad port NETWORK card issues

  Environment:

  -V4.1 ESXi on:

  -3 x servers Dell R710 (48GB of RAM) with SAS shared storage (No iSCSI) each with:

  -4 x Gigabit Broadcom PowerEdge R710 BCM5709 Ethernet ports on the motherboard (works well)

  -2 x Broadcom NetXtreme II BCM5709 1000Base-T on card 2 ports (works well)

  -4 x Broadcom NetXtreme II BCM5709 1000Base-T on a card 4 ports (problems!)

  Have installed ESXi 4.1 fees to each server.  When you configure the management network, I noticed that:

  -Server ESX1 correctly displays the 10 cards

  -Server ESX2 incorrectly shows 8 network interface cards (2 on the card 4 ports are "missing")

  -ESX3 server incorrectly displays 6 network interface cards (all 4 on the card 4 ports are "missing")

  VMware, I downloaded the latest drivers Broadcom 5709 for ESXi v4.1 and installed via the vSphere CLI (successfully) and restarted.  No difference.

  I exchanged the cards around in the server and 'mistakes' follow the cards.

  2 / 3 of the cards of brand new (I hope!) which have been purchased in an order are so apparently defective.  Maybe bad batch?

  Should I go with trying to replace these cards with the same model of 4-port Broadcom NetXtreme II 5709 cards... or should I try a different provider (for example a 4-port Intel card)?

  Suggestions welcome.

  In fact the network cards should be picked up in the order the PCI ID as described in example http://kb.vmware.com/kb/1002315

  Maybe it's allows you to run a 'Reset configuration data' in the BIOS of the server after connecting the network cards.

  The really strange thing is numbering ESX1, where even on a NETWORK card ports are not in ascending order.

  André

• 5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

  Hi all

  I just bought 8 streams HP 5901tw 4 days ago, yesterday, after internet connection using my card of 4G (WWAN driver) in my Tablet 8 Stream, suddenly the internet connection dropped and I lost my 4 G network card. I don't know why it happens by itself. But for connection Wifi still works well and wifi interface is always detected in network adapter but 4G is missing from the list.

  In Device Manager I see list of pilot missing in other devices-> HUAWEI Broadband Driver Module is missing from my Windows with Bing 32 bit OS 8.1. I try to find the driver through windows update, website of hp or other sources, but is not found. I also tried to update the BIOS firmware to the latest version and upgrade of such software firmware driver LAN, etc. from the HP Web site, but still can not fix missing pilot of the HUAWEI Module of high speed.

  I also try reboot several times, making recovery, but still having lack of driver for HUAWEI ADSL Module.

  Last effort, I try to current level Windows 8.1 to Windows 10, but still no conclusion success lack driver HUAWEI or fixing my 4G network missing question.

  Now I can still connect to the internet with my 4 G card more every trip.

  Someone there solution and how is address/where to download those missing 4 G network driver (HUAWEI ADSL Module) 8.1 for Windows or Windows 10 HP 5901tw 8 streaming?

  Really appreciate for any help and answer including HP support.

  It's really annoying to have this problem and get stuck without a solution. I just enjoy this new Tablet HP for 2 days and now unable to connect to the 4G network more.

  Thank you.

  Kind regards

  Wachyu

  I finally found the problem with the HUAWEI ADSL Module in my stream 8 HP (after 2 days of sleep trying to install and uninstall the driver and try all options).

  It seems maybe some Windows Update or a driver is trying to change the firmware inside the card top debit MOBILE HUAWEI to download mode (VID:12 d 1 PID:1568), so it can't use any driver installed in point 8.1 of Windows.

  I tried to manually change the download mode inside the HUAWEI tools firmware: Revskills (B. Kerler credit) return to the standard mode and then reset, then the Device Manager will detect again under the new material in NIC as HUAWEI Mobile Broadband Module (VID:12 d 1 PID:1570) and automatically installed its driver from Microsoft.

  VOILLAA, My Mobile Broadband can now be re-used to connect to Internet and now also presented in the connection.

  A lot of delicate here to force Windows using HUAWEI driver to use the COM Port to communicate with the card mobile broadband HUAWEI inside and then using Revskills tools to change the mode to return to standard mode.

  If someone knows this problem and wants my help, just ping me and I'll be happy to help you in the orientation.

• Satellite P100-324 - network card losing connection

  Hi all

  I'm a new user here, I have a * Toshiba Satellite P100-324 * with Window XP - 32 bit Media Center Edition.
  I have problems with my network card that seems to me to lose the connection network and need to reset the IP (repair) every time than in quite awhile to find the connection.

  What do you suggest to me what is the problem? A hardware problem or a software (driver)?

  Thank you in advance.

  Hello

  At the moment it is not easy to say what is the reason for this, it could also be a problem of the cable network.
  Did you check this first with another cable?

  If you have determined that the cable is not defective, you should try to update the network adapter driver. The latest version which is pre-tested on your laptop is that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Do you have other laptops or computers connected to the router? Maybe the problem is the router

  Good bye

• Not connected network card

  My laptop says he not a network card, I can't connect to internet via wifi or with a cable, he said also that I don't have the ehernet controller network controller PCI Device and SM Bus controller drivers

  If you can borrow an internet friends, you can download the drivers, to transfer them to a Flash DRIVE or a CD.  Without network drivers, you cannot connect to the internet.

• Unable to connect to the internet with the NETWORK card and Windows Millennium Edition.

  Hello

  I turned on my old computer yesterday, who has installed Windows Millennium Edition. At the back of the computer is an Ethernet port which is marked as LIEN ACT. The NIC with this port is Realtek 8139 PCI Fast Internet Adapter. I spend two hours on the Internet configuration and I did and finally got connected, but then, a few hours after, something went wrong and the Internet and the NETWORK card has stopped working! And the card has disappeared from the Device Manager, but he's still showing in network in Control Panel. I opened the computer and I reconnected it to the slot, but it did not help. At the back of the computer next to this port are two LEDs - green indicates the power that lights up when I plug the Internet cable and the other orange indicates actual connection. But now these two LEDs are not indicating something even when I plugged in the cable to the Internet, which comes from my router. In the computer a Dial Up connection PCI is installed too, but I disabled it. I used Dial-Up in 2002. So, I need help.
  But I know that I can connect with this Ethernet card to the Internet because it worked for 3 hours, I've loaded the pages and downloaded programs.
  Please don't point, should I upgrade Windows!
  Thank you.

  Hi friend,
  You can try a Bing search on connectivity to Win ME, I don't know there are still a few old sites that are not taken down you will find a few FAQ on.
  I saw not a ME machine in too many years to count!
  Good luck on your adventure.
  B Eddie

• Unable to connect to the Internet error "Windows does not detect a network card installed properly"

  Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.

  Any help is appreciated

  OT: Internet connection

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• HELP Please: problems connecting to Google Chrome or Internet Explorer: think it has to do with my network cards

  My computer works perfectly except that I can't connect to the internet using Google Chrome or Internet Explorer. Internet works fine.  I have another computer that is connected to the same network, and it works fine.  Also my signal strength is optimal. When I try to go on Google Chrome, it says that the web page is unavailable & the reason why is error: 105 (net: ERR_NAME__NOT_RESOLVE) the server is not found.  When I try to use the Internet, I get this message:

  Device is not working properly because Windows cannot load the drivers required for this device (Code 31)
  I've tried everything and looked at other forums. I went into Device Manager and tried to update the driver, but whenever I do it just says that all updates are already made.
  I really feel that my problem has something to do with network cards. When I go to Device Manager and discovered the network adapters 13 different adapters appear. The 1st is Atheros AR5007 802. 11b / g Wireless Adapter and it looks like it works very well but there are 11 different (Microsoft 6to4 adapt #10) (all have different # s, 10,11,12,14,15,16,17,18,20,5,9) there is (NVIDIA nForce Networking Controller)
  I think the problem is with the Microsoft 6to4 adapters because win I right click & then click on PROPERTIES of each adapter says: State of the device, this device is not working properly because windows cannot load the drivers required for this device. (Code 31) So, is to "find solutions", says & when I do that nothing happens, a message flashes on the screen that says: "Could not load driver software" and that windows is looking for information, but nothing ever happens.
  Can some1 please help me! My computer worked fine and both Google Chrome and still worked and then out of the blue it just stoped working. Any information would be very useful

  wisports,
  Thank you for visiting the Microsoft Answers community forum.

  You have found the source of your problems.  You must remove or uninstall, all the cards of 6to4.  Also delete everything that said map Tunnel or card miniport WUN.  Also uninstall or disable, Internet Protocol version 6 (TCP/IPv6) Properties tab on existing network cards.

  Once you have done these things, restart the computer and make sure that the 6to4 adapters does not return.

  Let us know how it works for you.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Atheros AR9285 in CQ61-410US wireless network card does not connect to the Internet after the update of the adapter driver

  I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter.   The laptop Internet access was fast and stable when using a Wi - Fi N.   Its pilot AR9285 was the initial version of the 8.0.0.172 factory.  But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe).  However, after updating the driver, I immediately lost Internet access.   The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.

  The driver seems to be installed OK, but it does not connect to the Internet.  Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly.  (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected.  Here are the results of the IPCONFIG/all command:

  C:\Users\Karen>ipconfig/all

  Windows IP configuration

  Name of the host...: KarensLaptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:
   
  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  Description...: Realtek PCIe FE Family Controller
  Physical address: 00-26 - 9th - JJ - 83 - 9 c
  DHCP active...: Yes
  Autoconfiguration enabled... Yes

  Tunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:

  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Microsoft ISHTHP adapter
  Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Auto connection...: Yes

  Map of tunnel Teredo Tunneling Pseudo - Interface:

  State of the media...:...: media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Teredo Tunneling Pseudo - Interface
  Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Karen >

  (3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."

  I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet.  I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N.  Even back to the original driver version 8.0.0.172 provides an Internet connection.

  Any advice would be appreciated.

  Hello:

  I'm glad that you were able to restore your internet connection.

  I'd go with the latest driver HP vice one from another source.

  The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.

  My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.

  Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.

• Windows Vista network card issues: limited connectivity

  My Compaq Presario laptop apparently has "problems with one or more network adapters. My connection shows only "limited connectivity" with the little yellow triangle. I tried several times to restart, update and turned off my computer so that the re - activate and update network cards. The wireless works fine on all other computers in the House, so I know it's my computer and not the modem. What can I do? I need help as soon as POSSIBLE. Thank you.

  Hello

  1. You have the latest service pack installed for Windows Vista?

  Method 1:

  The issue could be related to corrupt check Windows Socket the link provided below to troubleshoot issues with the nerve to Windows in Windows Vista.

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  Method 2:

  First, disable all other connections to try to force the wireless connection to request the information needed in the router.

  (a) click Start

  (b) Control Panel

  (c) network and sharing Center

  (d) managing network connections.

  (e) click every link that is EXCEPT the wireless LAN connection, and then click on disable this network device.

  (f) then see if your wire will connect.

  (g) you should probably run the diagnostic and repair utility on the Network and Sharing Center menu to force the wireless card to request information from the router IP.

  Method 2:

  If all else fails, go back into the network and sharing Center, manage network connections and right click on the wireless network connection and select Properties.

  Then click Internet version 4 Protocol and select Properties.

  Click in the box that says "Use following IP address" and enter the information that has been shown in IPCONFIG report for your connection to the Wired Local network above.

  Do the same for "use the following DNS servers."

  Make sure that you type the IP address, mask subnet, default gateway, and DNS addresses exactly the same than the connection to the Local network was when he got the information from the router.

  To learn more about how to troubleshoot network connection problems, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  If none of these things work let us know and we will continue to help you.

• Cable connection part for good - once I started using the wireless NETWORK card!

  Hello

  I went although all people in support on this issue, but now I have no other choice than to ask all you people here!

  That is the problem. I have two computers with multiple network cards. One is a laptop computer with wireless Draft-N support and 10/100/1000 NIC onboard. The other is a desktop computer with an ASUS Wifi b/g edge and also dual GigE ports nVidia graphics card.

  Whenever I try to use network wired for internet or local network even cards use, it died on me. It is impossible to obtain an IP address from the router to use and is unable to communicate with anyone at all. Not even with my local network or even directly to the router (192.168.1.1). If I turn on the wireless card, it connects and everything is groovy (except that I lost my GigE connection to my local network, which is most important!).

  I havegone through the standard fare of cyclic power to the router and cable modem, reboot of my machines, etc. all the normal things, we are required to do.

  After some hassles with the support of Linksys to get them to send me a new WRT330N, I finally received a new WRT310N and it shows exactly the same problem! Wireless connections work fine, but as soon as I disable the WiFi and wired go, Windows XP gives me nothing else than a message "limited or no connectivity" and let me out of the network.

  This leads me to think it's some sort of network problem due to multiple MACs on the same host name. Does anyone know how to get around this problem?

  Thank you!

  Disable the firewall on the computer and then also try to connect the computer to the modem and check if the computer is able to connect.