2 external monitors on HP DV7tqe Quad Edition

Similar Questions

• Want T15 - J100 Quad Edition Tou: recover the BIOS of the laptop using an external storage device

  So, from the start of my screen is empty and Caps Lock flashes 2 times.  I tried the Windows key + B + power key without success as indicted here:

  http://support.HP.com/us-en/document/c02693833?JumpID=reg_r1002_usen_c-001_title_r0003

  I tried to recover the BIOS with an external storage device but HP's Software and driver download page does not have BIOS updated.  I've updated for Windows 10.

  Where is the BIOS update that is supposed to be here? :

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-J100-Quad-Edition-Notebook-PC-series/6521...

  This model seems to have a lot of problems with what I find it everywhere on the internet, but the solutions all return to the download of the update of the BIOS.  I noticed that I can download an update for Windows 8.1.  Are there not one for Windows 10 yet?  Can I use the 8.1?

  The BIOS in the list of drivers of Windows 8 is the last exit for your model. You can use it regardless of the operating system because the BIOS recovery is run outside of Windows.

  BTW-to help the Windows key + B keys. When you press and release the power button / continue to hold the buttons for a few seconds see if BIOS recovery screen appears. I know that it is different from the document - but try it.

• Envy 15 t-q100 Quad Edition CTO: Envy 15 t-q100 Quad Edition CTO (ENERGY STAR) at 2560x1440p?

  I am looking to buy a 2560x1440p monitor to use as an external monitor with my laptop Envy 15 t-q100 Quad Edition CTO (ENERGY STAR) . Can this laptop complete 2560x1440p run via HDMI with Windows 10?

  Hello

  No, its maintenance and Service of Guide:

  ● HP Smart AC adapter
  ● audio input (mono microphone) / jack combo audio output (stereo headphones)
  ● HDMI v1.4 support up to 1920 × 1080 @ 60 Hz
  ● RJ45 (Ethernet)
  ● USB: two USB 3.0 ports, two USB 2.0 ports

  http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/7258295/model/7200495/manuals

  Kind regards.

• External monitor of higher resolution for Envy 17 t w/GeForce GT 740 M?

  I have an envy TouchSmart 17 t-j100 Quad edition with a Nvidia GeForce GT 740 M graphics card. It has only a HDMI port, no DisplayPort, DVI, VGA port no port.

  I bought a HP ZR2740w 27 "monitor, but apparently the desire cannot drive a very high resolution (2560 x 1440) monitor via HDMI port.

  What is the display max resolution that want support for an external monitor via its HDMI port?
  I looked for it in the product specification, but do not see it.

  Thank you...

  Whatever the graphic subsystem as UMA, 740M, 750M, or 840 M. It HDMI v1.4 output supports up to resolution of 1920 × 1080 @ 60 Hz.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• External monitor gives strange aspect ration with Satellite P20 XP

  I have a P20-552 (PSP26E-025E9-S4), who is four years and works well with XP Home SP3. For more screen space while editing video I recently bought an external monitor - an Acer X193w. It shows everything what is shown crashed down a little bit, that is to say, but it should show., a circle has a distinctive oval to it.

  It is plugged into my Toshiba with analog cable and the only resolutions that it will give me are 1280 x 1024, 1024 x 768 and 800 x 600 which none do actually correspond to the 1440 x 900 on my Toshiba.

  I tried all the settings that I could find, made sure my BIOS and nVidia are up-to-date and I exchanged a few e-mails with Acer support on the subject. Their support staff is now leading me round in a circle ("it is plug and play," "oh yes, that's sounds wrong", "here is the pilot", "no, we don't give installation instructions" and so on) and still no joy. The screen plug and play perfectly with an another Vista laptop that I have, but I really like to use with my Toshiba faithful.

  Suggestions, please?

  Thank you, Brian.

  Hello Brian

  Sorry, but I believe that there is not a lot, you can do it. It is 19 wide TFT screen and your laptop s video card does not offer good resolution for it. Display modes Satellite P20 cannot offer the resolution 1440 x 900 for external displays.

  * All you can do is try to change the driver display, but on your own risk.*
  Check http://www.laptopvideo2go.com/

• Satellite L30-149, only works with external monitor and VGA mode

  Satellite L30-149, Windows XP Home Edition

  Yesterday I did face the following problem:

  I swithched on my laptop but I have nothing on the screen. I tried to reboot several times, but it did not help. If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  I plugged on the external monitor. With that he gives a little more. The Intel logo with the instruction how to reach configuration etc. Then Windows logo but when it should ask the user, the external monitor going to sleep mode and nothing happens after that.

  And an external monitor, I managed to connect to Windows in safe mode and also in VGA mode. In VGA mode, I tried to change the resolution, after that I got black screen again and I had to start.

  Now I wonder if I could do something (update of drivers, etc.) or should I go to the store where I bought the laptop and ask them to fix it. This look like a problem covered by the warranty?

  --
  Upgrade to this message (what happened after that I wrote the above text).

  I turned on the laptop again. I thing the lightning from the room is now better because I noticed that the laptop seems to work (almost) correctly. Windows starts normally, I can faintly see the desktop. This seems to be a problem in the background ligthning. FnF7 does not change the situation.

  Post edited by: mpetas

  > If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  This sentence is very interesting.
  Sounds like a question of FL-ups!

  It is a small part behind the screen and control the backlight of the screens.
  Usually, this part is not very expensive and the replacement is not complicated to a technician for laptop.

  If your warranty is valid, then everything should be done for free.
  Try to contact the ASP in your country and ask for later handling.

  Greetings and good luck

• External monitor does not work on Vista of Tecra M7

  My external LCD monitor connected with analog cable doesn't work on my Tecra M7 with Win Vista and latest driver downloaded today on this site to display. Display of Windows Mobility center see the trendy, office is extended to the second screen and Windows display settings dialog box shows the correct resolution of the external LCD. But there is no image on an external monitor (with the 'no signal' message just after turn on the monitor).

  Any changes to the display (resolution, type of display (mirror, second screen, primary/secondary)) the settings do not work.
  Monitor works fine with my old laptop and Windows XP.
  If I restart my computer M7 laptop with connected external display I see loading messages and windows on external monitor logo and after that I see only painted while internal lcd to my laptop is black and I can't move at all internal lcd in this case (only restarting with external display disconnected works in this case).

  Hello

  Did assign the external monitor as the main screen in the graphics properties?
  I think you did this due to the fact that the Toshiba splash screen appears on the external monitor.

  But just moment please. The Tecra M7 was delivered with Win XP Pro tablet edition and not Vista.
  Have you installed it you own hand?

  I guess that everything worked running Win XP
  Maybe you should try to remove the graphics driver Vista system and use one from the 3rd site like www.laptopvideo2go.com

• Recommendation for external monitor for 2009 17 "MBP

  Hi all

  I would like to get an external monitor for the time where a 17 "display is not quite big enough, but is there a limit on the size I can go? And with a 2009 MBP, would be a 4 k screen work?

  The specifications of my MBP is: 17-inch, early 2009, processor Intel Core 2 Duo 2.66 GHz, memory 8 GB 1067 MHz DDR3, NVIDIA GeForce 9400 M 256 MB graphics card

  I'm happy to find an opportunity that A1082 Apple display 23 ", but maybe I would go a little bigger. Used Apple screens are starting to become a bit expensive when there are more than 23 ", so I consider sacrificing the aesthetics of the product and get a monitor not Apple to about 27"... could anyone recommend any specific model?

  I will mostly use the screen for the design work (InDesign) and surf, so that I don't do high range editing, I'd still like the colors to be accurate enough.

  Any help is appreciated!

  Markos

  the resolution maximum support from outside is 2560 by 1600, the resolution of the movie screen 30 inch apple.

• Re: Satellite A200-1IZ - external monitor problem

  Hello
  I recently bought an IPS monitor for photo editing. I configured the monitor in several ways, such as two monitors or monitors extended, but the image on the external monitor has a few little flicker and the image is not very pleasing to the eyes, a feeling like little refreshment on old monitor, very disturbing for the eyes.
  I plugged the monitor into another laptop and the image is much better.

  What could be the problem? I have Windows 7 32 bit and Ati Mobility Radeon HD 2600 adapter with the latest drivers.

  We do not know what monitor you have exactly, but what is the native screen resolution and what resolution is set to the external monitor when you use it with your laptop?

• Portege R600 - how to use the external monitor on the docking automatically

  Hi - I just got a new Portege; R600-102. It's a great machine - very light and fast.

  I connect to a Slim port replicator to the office and I wish I could anchor and automatically use the external monitor without opening the laptop. Can someone point me in the right direction on how to do it? This process has worked well on my recently retired Dell X 300.

  More precisely:
  # I have the laptop closed Portégé and standby mode
  # I anchor in the Slim Port Replicator (SPR)
  # I press the button 'on' on the SPR
  # I see the message "recovery windows" and the bars of the countdown on the external monitor. (So I know it's connected and you can see the external monitor)
  # The laptop turns on but use the laptop screen (private) LCD
  # I have to open it and manually tell it 'out to watch.
  What can be automatically?

  Thanks for the tips.

  Post edited by: ExDirectory

  Hello

  You use Windows XP Home or Vista edition?

• Satellite Pro L670-103 screen is dark - external monitor ok

  Hello

  Screen goes black in my Satellite Pro L670-103 while playing games. It is not completely off, but very very dark.
  System is activated and works while its happening. No flickering, changing colors.
  On the external monitor (TV via HDMI) everything works fine (so I guess that the GPU is very well).

  The beginning I had to restart the laptop and screen was once again but now it does not work and I have to wait a few more hours a sound goes on again just by itself (im leaving laptop on).

  I only use the approved oryginal drivers.
  System Windows 7 pro 64
  I guessed it might be the display inverter, but someone from the point of laptop repair told me that because my screen is RUN there is no converter and problem is with the screen itself.

  I spent hours reading various forums and UPS has been my best guess.

  Post edited by: Cezar_1

  Hello

  I think that its problem of converter FL.
  The FL inverter controls the backlight of the internal display.
  I think I get m with my suggestions because the external monitor looks ok.
  So it may not be a driver issue not a GPU problem

  Get in touch with the service in your country then must check this part

• Satellite Pro L670 - 16Z BSOD after start and an external monitor

  Hello!

  I have a strange problem with two Satellite Pro L670-16Z. I connected to an external monitor. After changing the settings to extend the windows desktop, I rebooted the system.
  Then I gott a blue screen. I disconnected the screen external, nut, this is not enough. The system does not start. I always get a blue screen.
  Systems running Windows XP. I have this with both of them with different external monitors.
  I can boot a BartPe. I did correct the systems yet. The systems are very cool, works only for 14 days.

  Any suggestions?

  Concerning

  Stephan

  Are you using the original recovery image Toshiba WXP?
  Can you start Windows XP Home edition in safe mode?

  The port on which you are using to connect the external monitor?

• Satellite L850-1V5 AMD RADEON HD M 7670 - no display on external monitor

  Hello.

  I'm having a strange problem with my Satellite L850-1V5 new with card in order to 7670M AMD RADEON HD.
  (It runs windows 8 64-bit family)

  At the beginning I couldn't open the CCC.
  So I uninstalled the program and reinstalled the drivers I found here, on the Web at Toshiba Europe site.
  Now it works well.
  But now I have another problem.

  First, I tried to extend/duplicate(whatever, it does not really matter) my workstation via the VGA port.
  In CTC, I could see that he acknowledged my external monitor model and even the mouse cursor has acted as the Office has been extended.

  BUT
  1. it has no image on the external monitor
  2. on the input of the external display Menu(:where one chooses the port to be used, i.e. VGA, HDMI, SCART, DVI etc etc) VGA port c o u l d NOT be selected, as if there were no cable on the external monitor

  Then I tried an HDMI cable with the same result, with the difference that on the external screen menu entry the HDMI port c o u l d be selected, as if it were a cable on the external monitor, but the monitor says "no signal".

  I tried the same steps via Windows Control Panel (menu Display).

  Same results...

  I tried on 2 different external monitors (the two LG ones, even if we're about 3 years older than the other, so I guess he should have nothing to do with the monitor).

  Any ideas?
  Is this a hardware problem, a software problem? Toshiba Service go?

  Post edited by: L850

  Hello

  To my knowledge, use the keyboard shortcut to switch to an external monitor.
  AFAIK the F4 (or Fn + F4) changes the output display.

  Have you tried using this button?

• Max Resolution for external monitor via HDMI on Lenovo Y700?

  Hello

  I hope that someone has experience with external monitors on a computer laptop y700.

  I would like to ask if my laptop Y700 supports resolutions higher than 1920 x 1080 for external displays via HDMI.

  My model is:

  https://www.Amazon.de/Lenovo-i5-6300HQ-quad-core-Prozessor-Betriebssystem/DP/B016QB9HZK/ref=sr_1_2?i...

  I want to use a monitor with a resolution of: 2560 x 1080

  https://www.Amazon.de/DP/B00TF0X37I/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&ColId=31RP1ZDSM66ZA&colii...

  Is this possible with my laptop. And it is even possible to connect a 4K screen?

  Thanks in advance for your help.

  So finally, I tried to connect my laptop to a 2560 x 1080 widescreen-resolution-display via HDMI in an electronics store:

  THIS MARKET! It is not a problem to run it with 2560 x 1080 at 60 Hz. The only problem might be a 4K resolution screen that it only works with 30 Hz, because it's an HDMI 1.4 port.

• Cannot use external monitor with my Tecra A9

  Hi all

  Need help on this:

  I connected to an external monitor to my Tecra A9 but the monitor shows me blue color.
  I tested other monitors and reset the graphics card to the default settings but the same stills.

  Can you give me some advice on how to find out the solution for this?
  I really need the external monitor to work because I need to edit some screens of the application.

  Thanks for your attention!
  Pago

  Have you tried to use the option of FN + F5 to switch to the external display?
  If this does not help I recommend to check the settings in the properties of the graphics card-> advanced settings.