2 yellow lines on Satellite Pro L10 screen

Similar Questions

• Replacing the screen for Satellite Pro L10

  The screen is cracked badly on my Satellite Pro L10. About how much can I expect to pay for a replacement within the United Kingdom. Is this something that I can wait to replace me with a screwdiver and some care?

  How much would a complete hull and the screen?

  Where can get me a - Toshiba service center my best bet?

  Hello

  The fact is that the screen of the laptop is one of the most expensive neighborhoods that are installed on the laptop.
  But unfortunately, I do not know what will cost repletion.
  This information you won't get form the Toshiba service partner in your country.
  I recommend you ask the service partner.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

• Satellite Pro L10 - question of replacement screen

  Hello

  I was wondering if there is a screen replacement out there that would be a compatible upgrade for my L10?

  Need something more high resolution ideally.

  Rgds
  Anno2

  Hello

  To my knowledge the Satellite Pro L10 uses a 15.0 "1024 x 768 TFT color screen.
  That is why each display 15 must be compatible with your laptop!

  If you are looking for a second hand display, I recommend checking out some online auction sales
  You might also find laptops second hand which also provide an internal display of 15.

  It would be an easier way to find a.
  The display is also one of expansive parts for laptop and in my eyes it s not worth it to buy a new game.

  But it's your choice...

• Satellite Pro L10 will not start the system

  Hello!

  I have a Toshiba Satellite Pro L10, which won't work for some reason any.

  The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

  It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

  There is also a 30 second countdown if I do nothing the portable samekh automatically.
  It is, none of these things work.

  Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

  He did about 50 times now and still nothing.
  I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

  Help, please!

  If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

  hope this makes sense and I gave you all you need to know.

  Thanks, B

  It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
  If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

  In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

• Can not get my Satellite Pro L10

  I have a satellite pro l10, I tried to put my recovery disk in and she said keeping key c down when I start my computer but it does, nt work, how do I get this drive to work does anyone have an idea, s Please

  Hi James,

  Press and hold the 'C' key is a specific shortcut of Toshiba to allow the laptop to boot directly from the CD. However, you can also select the CD-ROM as boot device in the BIOS, just press the F12 key when you see the Toshiba start screen for power over the process and you will be presented with a menu of the device selection. Tab just down to the CD-ROM and press to enter. The laptop computer should now boot from the CD.

  Kind regards

• Satellite Pro L10 - need drivers XP

  I recently did a new install of Windows XP Pro on my new HARD drive and got a list of other devices of the yellow question marks on them. They are;

  -Controller Audio multimedia
  -PCI Modem
  -Video controller
  -Video controller (VGA Compatible)

  Anyone know how I can get the drivers for these devices that I can not find an any of them on the Toshiba downloads/support page

  I had a Satellite Pro L10.

  I would appreciate the help as I do not have sound on my laptop.

  Thanks in advance

  Hello

  The laptop Satellite Pro L10 is an OLD series.
  Drivers and tools have been moved to the area of _ARCHIVE_ on the European driver Toshiba page.
  Recommend to check this area for some XP drivers!

  Greeets

• Satellite Pro L10 - recovery does not work

  I am currently that use the recovery cd of the product on my satellite pro L10, however when I am with regard to the selection of recover whole hard disk (option 1) then continue and then the following message appears on a black screen:

  For a drive partition error checking - please try again!
  Press a key to continue...

  When you press a key, then I get another white screen like this:

  X:\ >

  X:\ >

  I have no idea what to do about it, or even if it is indeed a problem, any help or advice would be greatly appreciated, thanks

  Hello

  Please format the HARD drive again and remove all partitions on the HARD drive.
  Several months ago, my recovery CD did not work. But after formatting HDD, I was able to perform the installation of the Toshiba Recovery CD.

• Satellite Pro L10 - PCI on motherboard at boot error

  Hey,.

  I have a Toshiba Satellite Pro L10.
  This weekend my laptop works normally.
  But now for some reason when I boot I get this error message:

  Resource conflict - mother PCI card
  Bus: 02, device: 01, function: 00
  F1 F2 for Setup to resume

  I can still get into Windows (XP SP2) and the computer works normally, but the error message is a gene.
  I've also updated the BIOS to the latest version that I could find on the Toshiba site, but still get the error.
  I guess that it is a hardware problem, maybe something is broken/failing?

  Any help would be appreciated.

  Hello

  I m not 100% sure that this error could say, but I guess that the PCI device (perhaps a card) connected to the bus 2 causes this error message.

  Maybe this could be a PCMCIA controller that is responsible for the PCMCIA card.

  Did you check your device manager for errors that are indicated by yellow exclamation points?

  Please check if one of the devices listed in the Device Manager does not work properly.

  Good bye

• Satellite Pro L10 reconstruction from scratch

  I need to rebuild a Satellite Pro L10 from scratch:

  Model PSL15E-00U003EN number
  Serial number: X 5137966

  I tried the recovery disc, no joy, LAN and wireless both give "limited or no connectivity."
  So I tried to reload Windows with a disc of Microsoft, always "connectivity limited or not.
  So I downloaded all the drivers.
  I rebooted the LAN and wireless drivers, and the modem driver and a few others to heal the yellow "?" in the Device Manager

  What to do next? Do I need another driver? I tried the Toshiba Recovery disk and loading Windows 'vanilla '. It's starting to look like a hardware problem, and I suspect that my last resort is to recreate the PC from scratch. A few questions:

  1. is there a complete list of drivers somewhere?
  2. in what order should I load drivers etc?

  Ideally, I would like to leave the non-essential elements, so I have a 'standard' windows install.

  Any help gratefully received.
  Simon.

  Hello

  already checked your network connection on the side of the router? May be some settings in your router are not correctly defined, or perhaps a few other computers on your network is involved with your Satellite L10.
  Please check your computer to another, well-known to the work network and ensure that the machine has also limited connectivity to ensure that it could be a hardware failure.

  Please give some feedback.

  Greetings

• Satellite Pro L10 - Unmountable Boot Volume

  My Satellite Pro L10 loops in the boot process. After the Windows XP splash screen, the following error messages appears:... Unmountable boot volume... Technical information: Stop: 0x000000ED...

  I know that is nothing exceptional and do a full restore would solve the problem. But I don't want to lose the data (which are of course not saved). I tried a Windows XP disk, but it does not start from the cd/dvd drive by pressing F12 or <0>and change the boot order...

  Can anyone help please?

  Hello

  Hmm, the volume not mountable startup error message appears especially if the HARD drive may not be recognized during initialization. Why? Well, maybe the HARD drive failures or the master boot record is defective!

  If you don t want to recover the laptop, you can try to boot from the XP CD (C press immediately after switching on the laptop) and to start the repair console.

  In the repair console, you can use the command chkdsk/p and after that, you could fix the disk main boot using the fixboot command or / and fixmbr.

  If this does not help, the new installation of the OS is that you as a last resort.

  PS: If you want to save the data you can try to remove the HARD drive and try to connect it via external USB HDD controller to another computer.

• Cannot burn CDs on Satellite Pro L10

  I have a Satellite Pro L10 and impossible to copy data files to DVD/CD player. I go through the process by using the Editorial Assistant and it appears to download the files, but finishes with a screen that says "cannot complete the CD Writing Wizard" and ejects the CD. The CD is empty, but the displayed size went from 720 mB to 647 mB of free space and total size.

  This was not always the case, because it worked when I first got the L10. The L10 has Windows XP

  Any ideas please?

  Hello

  Are you trying to burn the files using clean combustion of Windows?

  Hmmm I put t like this feature of Microsoft. I use a 3rd party software to burn data and files on CD or DVD.
  It s Nero burning ROM.
  This tool is really nice and I have not noticed problems using this software.
  You should also test this tool and I'm sure that you will be very satisfied.

  But back to the error message that appeared during the burning process;
  After a lengthy investigation on Microsoft pages, I found very useful knowledge base article Microsoft and information;
  http://support.Microsoft.com/kb/324129

  The error messageError: cannot complete the wizard of CD writing ofmay occur if the IMAPI CD Burner service is shut down. To resolve this problem, make sure that the service is running and that it has not been arrested. By default, the service is set to manual. Start the IMAPI CD Burner service and then test it by writing on a CD - R or a CD - RW. If the service is running, you may need to set the service to automatic if it does not start in manual mode.

  To set the service to automatic, follow these steps:
  1. click on start, run, type services.msc /s in the Open box, and then click OK.
  2. double-click on IMAPI CD - Burning COM Service.
  3. under the service status, click Start.
  4. try to write data to a CD.

  Good luck

• Loss of wireless connection on Satellite Pro L10

  I have a Toshiba Satellite Pro L10, with wireless capabilities built-in. I recently bought an ADSL Modem Belkin Wireless G Router. My desktop PC can connect to the internet via cable and cannot therefore have my laptop. However, when I connect to the internet via wireless connection my laptop sometimes everything stops. This isn't something to signal that I'm only about 2 feet from the router, and it is not that I can't connect to the internet, as I am on this at the moment. Is that in a few minutes, the connection will be lost and I can't seem to find what I can do about it.

  The other problem is that when I click the icon at the bottom right of the screen, the "Wireless network connection" window opens. Here, it shows the wireless network I'm trying to connect and it shows with a strong signal, but it is almost always said not 'connected '. He said never 'connected', even when I am connected to the net and surf away!

  Anyone has any ideas at all?

  It sounds a little to the Wireless LAN card is unable to obtain a valid IP address.
  These interruptions may occur for different reasons.
  But especially the new version of the driver Wlan and/or Bios should help resolve these interruptions.

  What card Wlan do you use?
  If you are using the Intel Wlan card you can also visit the Intel Web site to download the most recent version of the WLan driver.
  Please also compare the BIOS version available on the Tosh site with the version preinstalled on your laptop.

  Wlan card properties contain some useful options that could improve the quality of the connection. Energy saving options should also be required to check other functions in the tab advanced and disabled.

• Satellite Pro L10 and Windows 7 drivers

  Hi guys,.

  I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.
  XP drivers do not work.
  If someone managed to install the drivers for this machine? I'm mainly interested in getting my wireless card working.

  I look forward to your responses.

  Thanks in advance for your responces
  Panos

  Satellite Pro L10 is old enough for laptop and I do not think that you will find all the Win7 drivers.
  According to the Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - your laptop isn't supported Win7 and find the drivers won't be so easy.

• Satellite Pro L10-103 - USB ports not working not

  Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

  Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

  Hey Buddy,

  As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

  After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

  In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

• Extension memory Satellite Pro L10

  Hello

  I have a satellite Pro L10, which has only 128 MB of RAM. I want to wear this but can't find any information about it in the manual.
  I would like to know,

  How much RAM, I put in the L10?
  What type of RAM the L10 take?
  It's like a stick or two?
  Where can I buy this type of RAM?

  concerning

  David U

  Hey there,

  It has no internal memory, 2 locations available, 128 or 256 MB at 1 location, PC2100 DDR - RAM 333 MHz, 1024MB max

  You can buy the RAM from all :) any store on the computer or online from Toshiba.

  See you soon