2050 all-in-one is blurred lines and feed new pages in the middle of print job

Similar Questions

• HP Officejet 6310 All in One – "cartridge error - remove and re-insert cartridge on the left.

  HP Officejet 6310 All in One "cartridge error - remove and reinsert cartridge on the left."

  Help!  With this error message, it is not allowing me to print at all.  I did the steps to clean the cartridge and carriage of the printer inside, twice with no result.  I turned off and unplugged the printer several times also. In addition, the cartridge that I just put is new.  Frustrated.  Thanks for any help you can send my way!

  Hello

  Looks like you did the correct steps to try to resolve the problem. If you did all the steps on the below link without resolving the issue, the hardware may be damaged.

  http://support.HP.com/us-en/document/c00831987

  After checking all steps have been completed, please call HP at 1-800-474-6836 for see what upgrade options are available for this model.

• HP OfficeJet J4660 all in one appears "off-line" and the function desappears scanner

  Original title: device

  HP OfficeJet J4660 All in one – [1] it has been properly installed on the computer - DELL - Vostro. [2] he worked very well; [3] after a while, it appears "off-line" for all its functions. The scanner function desappears. What should I do?

  Hello

  · What is the operating system installed on the computer?

  You can follow the procedure in the article: "the printer is offline" Message appears on the computer and the product will not print HP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=sk&dlc=sk&lang=sk&lc=en&product=3692891

  You can also run the tool of diagnosis of HP for printer and scanner of concern:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=32965&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=3692891

• DeskJet 2050 All - in - One J510a: outside the printable area

  Hi all

  I use-

  W.7, Ultimate, 64-bit.

  Name of the model: Deskjet 2050 All - in - One J510a
  Firmware version:... SLM2FN1006BR
  Serial number:... CN0BD3F28805D1
  Service ID:... 21074
  IK No.:... 670
  Software version:... 028.000.1313.000
  The printer driver version:... 09.84.00.1189

  When you use Word, in Office 2010, I have margins set to 'Normal ' -.

  Top: 0.98 "low: 0"

  Left: 0.12 "right: 1.18"

  Whenever I have insert a border around my text and that you try to print, I was informed that section 1 page borders are defined"beyond the printable area of the page. Do you want to continue? »

  By clicking on 'Help' I read and follow all the different "solutions" available. None allow the page to print.

  I selected all of the selections of available margin different and even selected some of my own under the "custom margins. The page to print with border permits.

  For example, one that I tried was-

  Top: 0.06 "low: 0.57"

  Left: 0.12 "right: 0.13"

  I then clicked on 'Options' under 'Page borders.'

  to the "measure of" I chose "Text" once more, I was unable to print the page with the border!

  I find this very frustrating, and I can't find a solution.

  I would be very grateful if there is a known workaround that will allow me to print a Word document with a border selected.

  (I have no technical experience, and if there is a soluition, I'd be happy to get detailed instructions!)

  Thank you

  ColinX

  Hello

  Your printer can print without margins (IE margin = 0 ").  This printer can print only to a certain margin.

  bottom margin is 0.57 ",
  top margin is 0.06 "
  and the left and right margins are 0.125 ".
  
  So if you try to print beyond this margin, the impression will be cut or outside the printable area.
  
  Kind regards.

• DeskJet 2050 all-in-One - J510: how to print without borders?

  I try to print my project on paper to A4 borderless, but it seems that no matter how to change settings, the results still had a border. Can someone give me some advice on how I could solve this problem?
  
  I print on Word, and my printer is HP Deskjet 2050 all-in-One - J510a.

  Hello.

  The deskjet 2050 printer does not support printing without margins, as you will find by notebook loads below:

  Without borders: No.

  http://h20195.www2.HP.com/v2/GetPDF.aspx/4AA1-1465EEE.PDF

  This material allows to print only to a certain margin.

  The lower border is 0.57 ", the top border is 0.06 'and the left and right borders are 0.125. any impression beyond these margins is cut off due to the limitations of harware.

• DeskJet 2050 all in one J510: installation HP deskjet 2050 all-in-one with windodws portable

  Hello

  Top of greaded for the new laptop that has windows 10 and can not get my printer to be seen.  When the printer is connected through the USB port, computer laptop just scan, load an application for wireless use won't see or interact with the printer as the device is not a wireless model, (only 5 years).  printer still works great on Windows 7 laptop, but the laptop keeps freezing as is the reasosn for the upgrade.

  Question is how to make the new laptop to use my printer?

  I still have the domain controller that came with it, but it will not work installation on the laptop W10.

  Help, please.

  Thank you

  Denise

  @ladyzq

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you did not, please install the software of full functionality for the printer.

  and / or

  • Start here: HP Print and Scan - Doctor help solve printer problems

  Printer, one of

  "Deskjet 2050 all in one J510 ' (5)

  Full software functionality (the printer program):

  Name of the file:

  DJ2050_J510_1313 - 1.exe

  (49.0 MB)

  Help, suggestions and examples:

  Install the full features software - printer

  Operating system recently migrated to Windows 10 and re - install the printer software:

   

  1. If you use a USB cable to connect the printer and the computer, disconnect the cable
  2. Create a Restore Point >
  3. Reinstall / update your PDF reader (Adobe Reader DC / Foxit)
  4. This works best if the updates of Windows (10) computer are up-to-date - check if you are unsure
  5. Update your drivers HP (or another computer of the seller) - printing software like updated drivers
  6. Open printer pilot site support Page >
  7. Download a new copy of the Full Feature software >
  8. Remove the printer from programs and features existing software / applications and features / all Apps / devices and printers >
  9. Shut down the computer > start and connect >
  10. Install the full feature software (find in your downloads folder > double-click the file) >
  11. Restart the computer and log in to complete the installation

  Article (s) of interest include:

  • Start here: HP Print and Scan - Doctor help solve printer problems
  • Preparation
  • Extras, tips and some Cool stuff > HP, Installation Help and Diagnostics information
  • Create a Restore Point
  • Remove the printing software (two parts)
  • Download and Installation
  • Integrated webserver (EWS)
  • 10 Windows updates (check)
  • Restart all
  • Analysis of the Options of program *

  ** Cool independent scan programs (thanks to greenturtle for links to HP extended Scan!)

  Reference:

  Options of the digitization program

  Sections of the document include:

  HP Extended Scan - Single, multiple scans, automatic framing!

  NAPS2 - not another scan PDF

  And others...

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• Print on both sides, Deskjet 2050 all-in-One J510a

  Hello

  I have a Deskjet 2050 All - in - One J510a and I just realized that I can't manually print on both sides simply because this function does not exist on the print menu in the Properties window.

  So, how can I print on both sides?

  Thank you

  Gil

  So I guess I should be a REP from HP because these guys are not answering the question? If you go under Printer Properties Advanced there is an option to print only the even or odd, pages print the odd pages first and then put the paper in the printer, go to print click on main pages and bam there you go.

• How can I download my HP Deskjet 2050 All in One series J510 on my netbook without disc

  Is it possible to download my HP Deskjet 2050 All in One J510 printer on my netbook without disk? I really need to print things because my main computer's in the shop. Any help would be greatly appreciated. Thank you. Sincerely, Lisa Horsmon

  Hello

  the software to install your printer can be downloaded here...

  http://h10025.www1.HP.com/ewfrf/wc/pfinder?CC=UK&DLC=en&LC=en&tool=&query=DeskJet+2050

  .. you will need to select model 510, 510 or 510g depending on what model you have.

  Tricky

• I have Adobe Acrobat 9 Standard on both of my computers.  Some time previously, one crashed my computer and I had to reinstall the operating system and all applications.  After you install Acrobat 9 special and differential treatment in the computer once,

  I have Adobe Acrobat 9 Standard on both of my computers.

  Some time previously, one crashed my computer and I had to reinstall the operating system and all applications.

  After you install Acrobat 9 special and differential treatment in the computer once, I wanted to update the update of the version 9.0.0 software to the same level as it was before the crash and that the other computer has version named 9.5.5.

  The update to version 9.0.0 system does not at all. 'There is no update' listed in the dialog box.

  Can you advise how to get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level it had before the accident.

  FTP://FTP.Adobe.com/pub/Adobe/Acrobat/Win/9.x/

• Photosmart C8180 All-in-One printer that turns off completely in the middle of printing.

  I have a Photosmart C8180 All-in-One printer that powers completely in the middle of printing, wasting time, paper and ink. It restarts also sometimes more and more and more and sometimes it stops and all the lights blink quickly, show an on-screen error code. During these periods, the power button seems useless. I use the printer with a HP Pavilion dv7 laptop running Windows Vista and an HP / Compaq Presario Windows XP.

  When the C8180 works correctly, it's great. But I can't allow myself to be play roulette of the printer. Help, please. Thank you.

  Thanks to kkcb9395 for your help.

  Unfortunately, I have not found a solution to fix my HP C8180. The 800 number only referred me to another number (866-234-1377) where someone in India tried to sell me a phone support or a new printer. Phone support will not fix a burned capacitor and the new printers HP scan slides. Not to mention the $100. new ink I'll have to eat if I can't solve this problem.

  For anyone who has followed this thread and interested in your own C8180 setting here is a link to a parts list.
  http://www.partshere.com/hppartslist/hpparts.asp?part=L2526A
  If you find a repair manual, let me know.

  I am a customer of HP for HP CEO and longtime who think they have the customer service thing down, I'm on my way to buy an Epson.
  Thanks again for your time.

• I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

  I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

  Hi edwards39572619 ,

  Please visit this link to download Acrobat 9 Pro:-download Acrobat 8 and Acrobat 9

  Let me know how it goes.

  Kind regards

  Christian

• How to upgrade my HP Photosmart all-in-One for Windows 7 on my new computer?

  My HP Photosmart C5380 all-in-One bought in 2008, and it was connected to Windows Vista my laptop LG. However, this month my laptop LG broke down and I bought a new Sony VAIO laptop.

  However, I can't seem to connect my printer to my laptop because the printer says that it does not accept Windows 7. I brought the computer to a repair shop, and the seller told me that there is a program that can be downloaded from the HP site which would allow the printer HP be able to connect to my new computer. But I can't seem to find it.

  Could someone help me please?

  There are two flavors and versions of Windows 7. The question fundamental whather it is 32 or 64 bit. This is where the software for Windows 7 . There is a drop-down list on the web document that allows you to choose the appropriate operating system software you want to download.

  Best regards
  ERICO

• How to get the phone and messages back in my dock apps? And for some reason, I discover now all my app pages from the middle of my phone and not at the top?

  How can I get the phone and messages apps in my dock? And for some reason, I discover now all my app pages from the middle of my phone and not at the top?

  Try

  Settings > general > reset > reset home screen presentation.

  Note: All other applications will be organised by alphabetical order.

• How can I combine all pages of the site to a new page of the site?

  Hello

  I use Dreamweaver cs4 on a windows pc. I have 12 pages of my site with a spry vertical navigation bar. Whenever I create a new page I then add that to the spry navigation bar. All other pages do not show this new page in the navigation bar. Thus, the spry NAV. must be site wide update. Is it possible to update the spry navigation bar site wide in a few clicks? Is there an easy way of all the other page a link to this new page? I have a rendering template, but all pages on my site are now detached from this model. Whenever I saved the template in an html file to create a new page in the navigation bar was the word inside template, so I just deleted it out of the code. As you can probably I'm pretty new to dreamweaver so any help will be greatly appreciated to say the least. I checked everywhere wherever I can think of for the answer

  Thank you for taking the time to help, dluthier

  Is it possible to update the spry navigation bar site wide in a few clicks? Is there an easy way of all the other page a link to this new page?

  Yes, there are ways to have all the pages to be updated when you make changes to a navigation bar.  However, the way you describe the situation you currently do it all manually.

  The easiest way to update a navigation bar:

  1. the use of serverside includes: this is a basic tutorial explaining what is a SSI and how it's done.

  http://bignosebird.com/SSI.shtml

  2. the other is the use of models - that you tried.

  I have a rendering template, but all pages on my site are now detached from this model. Whenever I saved the template to a file html to create a new page in the navigation bar was the word inside template, so I just deleted it out of the code

  That's where you went wrong, you save the template with a new name, and save it as an html file.  You must use: Create New > model.  This way, you create a new page of the master model and save it in the root of your site - and this is what is called a "page of the child".

  Using DW templates:

  http://www.Adobe.com/devnet/Dreamweaver/templates.html

  The differences between the use of SSIs and DWTs (template file):

  With a SSI file, you make changes to the file and all the pages, the inclusion of which will update automatically and you need only download a SSI whenever you make a page.

  If you use a model, whenever you make a change, once again all children pages are updated, but you need to download * all * changed pages.

  I hope this helps.

  --

  Nadia

  Adobe® Expert community: Dreamweaver

  http://Twitter.com/nadiap

  --------------------------------------------------

  Unique templates CSS | Tutorials | SEO articles

  http://www.DreamweaverResources.com

  http://csstemplates.com.au/

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.