2055dn

Similar Questions

• HP 2055dn Printer Laser software for windows 7 does not work

  Have tried several times to install the software for Windows 7 64 bit on my HP 2055dn printer.  Used called download: P2050-full-solution-AM-EMEA1-v6.1.exe.  Still doesn't give me the software, even if the window "uploaded successfully" appeared.  Printer works fine.  I want to be able to access the software with the function ToolboxFX.  What can I do else?

  OMG.  I finally have my ToolboxFX now.  I went to the HP support & downloaded the program page:

  P2050-Full-solution-am-EMEA1-V6.1.exe

  It wasn't the 1st time I tried to install this program (for Windows7 64 bit).  Today, it worked.  I feel like the little engine that could!

• Software LJ 2055dn - FTP site does not?

  Hi people, tried to download the installer for the Laserjet 2055dn but the HP FTP site does not respond.  Can someone give me a HTTP link for the installation of the complete software for the United States / Europe?

  Much obliged if you can help!

  Hello

  I have no problem with them (I mean, I took 5 of them randomly). You can try a different browser to see any good - I use Firefox.

  Please try this and let me know that it does not work:

  http://ftp.HP.com/pub/softlib/software11/COL33807/LJ-84320-1/P2055_default_install_v6.1_ww.exe

  Kind regards.

• LaserJet 2055dn windows 10

  I have a 32-bit hp computer 10 years on which I have installed Windows 10.  I can't get my hp laserjet 2055dn printer to work with Windows 10. The printer appears in "Devices and printers" but the test page will not print nor nothing will print from MS Word. I can't find a driver on any HP support site. Help, please.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=3662059&swLangOid=8&swEnvOid=4191

• LaserJet 2055dn guard re - install (and fault) on Win7 32 bit

  Hi there, we have a certain Laserjet 2055dn office configured to print via a USB connection to a docking of the user (and thus their laptops). They also 2055dn at home too, which they plug it into their laptop again via the USB port.

  We recently migrated 3 users of XP to Win7 32-bit as a pilot and as such, we need get their impression also works.

  On the first machine, I used the HP Universal Print Driver PCL6 (5.4.0) version on the HP site - everything went well until when we went from the printer and turn it back on again - he then tried to install the printer all over again and then failed. We then tried the P2050 (61.093.02.77) Series PCL6 driver from the main site and yet once again, everything looked ok until the user called to say when she went home and plugged his 2055 in, he again tried to re - install the printer and a not rather than using the print object existing only.

  I checked and when the printed object is created, it's going to USB001, and as I said, it's all ok until you plug the printer back in?

  If anyone has noticed this problem, or similar? I wonder if force us users to always use the same USB port on the laptop if it would help? I note that when the printer is found, it also seems to show an integrated HP Web server (or along those lines) print USB driver and try to find the drivers for it too much.

  Any advice or suggestions is very welcomed,

  Thanks for looking, Steve S.

  Hi sansini,

  It is a product of the profit margin. For the best answer to your questions, you need to transfer your question at the following links.

  http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

• Pages with "GET /DevMgmt/Discoverytree.xml HTTP/1.1" unwanted printing on HP 2055dn

  Print pages with GET /DevMgmt/Discoverytree.xml HTTP/1.1

  Host: xxx.x.x.x:xxxx (IP address

  It comes from occurring with HP LJ 2055dn

  Anyone know how to PREVENT what is happening in order to avoid the waste of paper?

  There are a LOT of people posting on this problem WITHOUT help from HP support online!

  Common problem: using Win7 (32/64 bit) version with current driver from CD.

  Install the latest driver from HP.com does NOT solve the problem!

  Any ideas?

  Thank you!

  Here is how I solved the problem, at least for me

  -Goto printer and select HP 2055dn (currently using "PCL6" pilot)

  -Right click and select "printer properties".

  -Goto "the device settings tab.

  -The "Installation Options" settings Goto

  -Duplex: installed

  -Notification of printer status: DISABLED CE IS PROBABLY THE CULPRIT!

  Press 'OK' to accept!

  This solved the problem, at least for me

  Good luck!

• I use a HP Laserjet 2055DN on Windows 7. every time I print it gives me this blank page with t

  I get the message printed as follows:
  I use a HP Laserjet 2055DN on Windows 7.
  How can I get rid of this?  Every time I print it gives me this blank page with the message /DevMgmt GET / DiscoveryTreeee.xml HTTP/1.1 Host: 127.0.0.1:8080
  He just started to do in the last two days. I think that my software drivers have been updated automatically by HP.
  Can you help?

  Hello

  This problem has been caused by the HP Universal print driver. Please remove the existing device P2055 printer & printers. Click Server properties, and then remove the driver tab HP Universal print driver.

  Download the latest driver P2055 webste and install it.

  Download the latest driver from the following Web site:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3662052&prodNameId=3662058&swEnvOID=4063&swLang=8&mode=2&taskId=135&swItem=lj-84320-1

• HP laserjet 2055dn B0605 error

  HP laserjet 2055dn B0605 error, I need solutions for this error I tried with the site, but it does not work.

  @Abhitech,

  Please refer to this document to help troubleshoot the problem you on the error message with this printer...

  HP LaserJet P2050 Printer Series - error B0601, B0602, B0603, B0604 or B0605 POPs during initialization of the printer

• P2055dn: HP 2055DN displays a B0605 firmware error - BAD BURN FLASH error message

  Hello!

  This morning, when I update my firmware p2055dn with the original site of HP update tool, a saw, a green smile on the monitor represents everyrhing is ok. I do not watch my screen printers message, power cycle just the printer, after the update has finished its work.

  When the printer starts I a B0605 error message.

  I found solutions on this forum, but none of them does not work for me. I found an old Coves at the HP Enterprise forum, but I find not subject of the printer, just the categories of Enterprise Server and software.

  No one can solve this bug to update the firmware without service hp?

  Thanks for the replies!

  Here is a link to the instructions.  If they do not work, then you need to replace the formatter.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01687323-5

• HP 2055dn: 2055 series car no longer double prints

  automatically (manually) to print double-sided.  updated for win 7, is no longer automatically (manually) print double sided... of ideas?

  You can check in 2 places-sorry I have to use a color lasjet 3700 as my example, and I also use windows 10, so my screen may appear slightly different than yours.

  go to you the devices and printers folder in Control Panel of windows

  Right click on your printer driver and choose the printer proerties. You can then check to make sure that the duplexer is recognized.

  

  Once find you it, and it is enabled, click on apply, and you can also check the printer preferences. Find the duplex or two side printing option and make sure it is enabled or checked.

  

  Sorry, the photo below looks terrible, but there is now a checkbox "print on both sides.

• More on unwanted Pages print "GET /DevMgmt/Discoverytree.xml HTTP/1.1" on HP 2055dn

  I have this same problem with my new P2055dn.  I have studied the problem.  What happens to any driver that I use.  (I now have three people on board, each fully updated.  They are universal, PCL 6, PCL 5 v.5.4, so Microsoft XPS Document Writer).  I also disabled reports in the printer menu.  Yet, I get this printed page several minutes after each print job is finished.  I am running Windows XP.  I really hope that someone can help;  It seems really stupid, and I don't want to have to live with it!

  Problem seems to be resolved.  I use the universal driver (No PCM 5 or 6), with reporting disabled.  This is the configuration that I got when I wrote my original post.  I wrote because the printer DID print that report sheet at least once and maybe twice, with this configuration in place.  Multiple print jobs is completed since then, without any additional reports ongoing print!

  Given my experience, I suspect that other users will benefit from reviewing the several threads available on this topic.  HP, you must fix this so that the printer works out of the box!

• Cannot select 2055dn trays in Snow Leopard

  After upgrading to Snow Leopard, my tray 2 is no longer recognized. I called HP and asked if the problems were known and after being transferred around for an hour and a half to technicians of XP and have me do all sorts of checks on my hardware setup printer, finally told me "it must be a problem with the software. I TOLD them that for an hour and a half before, but I've done all of their requests.

  At any given time they would send me another printer.

  All I wanted to know is if it is a known issue and a fix should be available if it was. They have finally disconnected me.

  I read through the forum and have not found anyone else reporting this issue. My printer works fine through the 3 lowest status bar, but I as well need tray 2. Currently I have to share the media constantly for my business.

  An expert please confirm that the option to select the trays will be back someday? I undestand a lot have no printer to may all sounds a stupid problem. Believe me it's very serious. I would put even the old OS on if I felt that it could solve the problem.

  PS I have connected my Windows Vista 32 bit computer to the printer and the tray works correctly.

  I expect an answer please.

  Thank you

  Message edited by Gordyb 08/09/2009 19:48

  Where it says layout in the print dialog box.  Click on this drop down.  You should see an option for paper feed.   The section of the driver paper feed is provided by Apple and not HP.  If you click on page layout and that you don't see paper as an option, you should contact Apple Support as there is a problem with your printing system base of Mac OS X.

• I have a HP 2055dn which displays the error memory 10.1000 of power.

  I traded for a genuine HP cartridge HP toner cartridge and I still get the error. I tried several different cartridges thinking that one was defective. What can I do to correct this printer?

  Hello

  Please follow him that reset as below:

  1. press OK.
  2. press the down arrow or up arrow to navigate in the list, select Menu of Service.
  3. press OK to select the Menu Service option, scroll down to select default settings and press ok.

  Although I am an employee of HP, I speak for myself and not for HP.

• Network printer keeps losing its connection to laptop only

  I have a HP 2055dn printer that is connected directly to the port USB001 on a Dell Windows 7 SP1 desktop pc. This printer is on our network with limited access to a specific user. The printer is installed on the pc as the default printer and works great. However, the issue is with the Dell laptop Windows XP SP3 to users that is connected to the network and also has access to the same printer. The printer is set up on the laptop and, sometimes, it works very well and it is sometimes impossible to connect to print. It doesn't matter whether or not it is defined as the default value. The driver is updated. There isn't any manually installed on the printer IP address, nor I see that the IP address of the printer is connected to on the server directly from computers to change a port setting. We use Windows 2003 server and do not have an internal network administrator.

  After making the foregoing I check the devices and printers on the Win XP machine and the HP2055 is listed but still displays "unable to connect". When I check the port for this device settings, it says:

  Port: USB001

  Description: Virtual USB Port

  Printer: HP LaserJet 2050 PCL6 of series

  If the port on the laptop computer Windows XP appears as "USB001", this means that the laptop would expect to find the printer physically connected to one of its own USB ports.  This isn't where I understand that you have the attached printer.

  Unless I'm totally confused about your configuration (always a distinct possibility), you have the printer physically connected to the Windows 7 desktop.  You want to be able to access the printer from the laptop XP over the network.

  I guess that you can share files between the Windows 7 Desktop and laptop computer Windows XP.  If you can't share files because you have not properly configured the network permissions, you will not be able to share the printer either.

  On the Windows 7 Desktop, go to printers and devices, right-click on the icon for the HP 2050 and select "printer properties".  Click on the "Sharing" tab  Boxes for 'Making the printing on the client computers' and 'Share this printer' must BOTH be audited.  Make a note of the name in the "Share name" box (this should be a name relatively short no spaces and no special characters, something like HP2050 would be nice).

  On the desktop of Windows 7, click right my computer and select Properties.  Make a note of the name of the computer.

  Because the instance of the printer currently installed on the laptop Windows XP expects to find the printer on the USB port, you must install another instance of the printer on the laptop.

  • Go to printers and faxes, and start the wizard to add a new printer (click on add a printer)
  • Click the radio button to add "a local printer attached to this computer.
  • Uncheck the box for "automatically detect and install my Plug and Play printer."
  • Click next
  • Click on the radio button to "create a new port".
  • In the drop-down menu, select "Local Port"
  • Click next
  • In the "Enter a port name" box, type the following command and click OK
    \\COMPUTERNAME\Sharename
  
  where "COMPUTERNAME" is the name of the computer in Windows 7 that you noted above and "Sharename" is the name of the sharing the printer configured on the Windows 7 computer
• Run the wizard, add a new printer as usual.  If a message appears saying that a driver is already installed for this type of printer and you ask if you want to reuse the driver installed, answer Yes.
• When you get to the step of naming the printer, add something on behalf of so that you will know that this instance is one that is installed on the Windows 7 computer.  For example, if your computer name is DELLW7, you can name this printer 'HP2050 on DellW7.
• After you have confirmed that this system works reliably, you can delete the icon for the same printer in the screen of the laptop computer printers and fax machines (unless you sometimes actually want to connect the printer to the USB port of the laptop).

• LaserJet P2055dn cold reset

  I need to reconfigure a printer LaserJet 2055dn network.  However, I can't know how to do a cold reboot.  The sequences ' press on and press and hold the power on ' do not seem to apply to the 2055dn and there is not a reset option in the menus.  Any ideas that I can do to go back to its factory settings?

  Thank you.

  Sorry, but you have the wrong forum.  These are consumer forums and you need business forums.  Just follow the link and will get you to the right place.

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.UBwynk2PVM4