2373 9FU T41 won't start

Similar Questions

• T41 won't start, help!

  My three year old T41 won't start. When I turn it on, the battery light comes on, I hear the fan and then... nothing. No IBM logo, so it isn't even going to BIOS. I tried to remove and reinsert the battery and this makes it grew up the IBM logo and taken to my XP login and then screen... the keyboard is locked, and there are horizontal stripes (a bit like trails caused by electric shocks on a TV screen) around the connection icon. Stop and on again, the fan noise and nothing else.

  Any help much appreciated.

  IBM T41 (model 2003), Windows XP Pro, 1 GB of ram.

  Check your PM.

  Good luck.

• T41 won't start

  I recently bought t41 eBay seller said it worked fine, but when it happened does not start flashing screen cdrom

  power light and green battery really don't know if it's to suspend or sleep mode used external unsuccessfully monitor all help

  Maybe something loose potted in shipping appreciated.

  memory was discovered at the back has been reinstalled the bad it by suggestion sellers no difference deleted completely and she pulled upward

  Thank you for all your valuable

• IBM/Lenovo 802, 11-N available for T41 2373-9FU internal card?

  I have an IBM T41 2373-9FU Type.

  The laptop has an internal wireless card, and I guess that the card was included with the laptop because the card can be managed by using the Fn + F5 key and the corresponding software.

  I really like the IBM software used to manage the card and also like the relative elegance of use an internal card, rather than a PCMCIA or USB card.

  Are there maps mini-PCI IBM or Lenovo available that take supported 802.11n? I love the wireless software I use now on the laptop and wish to continue using it, rather than using a software and a different brand card.

  Thank you

  Steve

  Welcome to the forum!

  No "n" card is available for the series T4x ThinkPads, I'm sorry to say.

• my iphone 6s erased and won't start

  My Iphone 6s erased and won't start

  Hello

  Follow the instructions here, including contacting Apple Support or your Genius Bar reservation if necessary:

  If your iPhone, iPad or iPod touch won't turn on - Apple Support

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• Equium A100-147 tried to update BIOS, now won't start

  I was updating the BIOS on my laptop and now it won't start, the screen stay black and I just hear three beep. A long-term follow-up of two short.

  Any help would be appreciated,
  Thank you.

  > I was updating the BIOS on my laptop and now it does not start

  It seems that the update of the bios that went bad and had to be reflashed. Bios recovery is a delicate procedure and you should contact the service center:

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

• Satellite Pro 6000 won't start or do something

  Hello

  My satellite pro 6000 stopped working all of a sudden.
  Power led, battery, keyboard LED is on, but nothing happens, tried to remove the battery, cd, hd and put them back, nothing seems bad.
  Also tried the back button back in case but no tip was not all good.
  It just won't start at all.

  Any ideas out there?

  Thank you

  [Edited by: moderation of the Forum]

  Do the job of seem´to LEDs ok, or they do a code flashing for you say that it is something wrong?

• Qosmio G20 - won't start, error ATA #1

  I have a G20-102. Today I opened my flash drive and files all showed them as shortcuts. I tried to connect to Firefox 4 and a warning from AVG threat came pointing to C:\windows\system32\mssrv32.exe (Tr/Crypt.xpack.Gen3) as a Protection of identity. I opted for the "Move to vault" option and asked to restart

  Now my pc won't start - I get the Qosmio screen, ATA error #1 (CD player has been removed) and then the screen "rolls" - looks like random pixels flashing on the screen. I'm trying to start safe mode, but F5, F8 or any Fkey is not doing

  To make things worse, the CD rom has been removed, faulty, so I can't boot from another device. I don't have a USb in the BIOS, only FDD option which I did not

  Help, please

  Hey,.

  To me, it looks like a serious hardware malfunction

  You could try to load the default settings in the BIOS. Enter in the BIOS, and then press the F9 key to load defaults. Then save & exit the BIOS and try to start again.

  The HARD drive is recognized correctly in the BIOS? If so I try a recovery disk Toshiba recovery installation and check if the problem is hardware or software partners.

• In early 2011, MacBook Pro won't start

  In early 2011, MacBook Pro won't start

  Is-ti connected? Fully charged?

  Give us some facts!

• MacBook won't start - completely back screen

  2015 12 '' MacBook

  My MacBook won't start. I put on various points of sale and even changed on the brick of cable and power (I have an extra).

  Nothing happens when I press and hold the power button.

  Any suggestions before I take it to the Genius Bar?

  Here is some information that might be useful.

  After I press the button for a few seconds, the trackpad does not haptic feedback, confirming that this is the start.

  However, if I press the power button once again, I get haptic trackpad. It tells me that it is on, but I always get a black screen. And if I press the caps lock key, no green light appears.

• Satellite Pro 2100 won't start at all - LED flash

  My SP2100 began to have feeding problems and now won't start at all. The AC adapter green LED is lit, that are relevant lights on the body of the laptop (although the "battery charge" light always orange these days). When I try the switch on, startup begins (in fact succeeded on occasion until this morning), however the battery indicator and the adapter lights are flashing, and everything stops again.

  On the rare occasions when I'll be past this stage, lights blinking, and the system soon shuts down again with a screen message "low battery." Until this morning, he would sometimes settle, the computer remained on, and the lights showed a State of equilibrium as usual.

  Initially I thought that the problem was of course the battery or the AC adapter, but now I'm starting to think that it is with internal PSU of the laptop (although I suspect the battery is probably tour after all this part of loading and unloading).

  Any ideas?

  Hello

  I think you're right. Flashing LEDS are a sign that hardware is defective.
  I can't say what exactly is the problem, this should be verified by a technicain.
  On the other side I don't know if it's worth to repair such an old machine.

  Good bye

• 4600 won't start

  Hi, community,

  my pro sat suddenly won't start. only power led flashes. Got out of the car, a piece of metal appears to be noise. But - if the drive is broken - shoulnd't the laptop will start anyway? Thank you for your help in advance. Wolfgang

  Hi, Wolfgang

  Yes, the machine must be able to start up indicating at least the TOSHIBA logo without the optical drive and fixed.

  Some background info: flashing DC-IN means that you have a problem of power supply to your machine.

  Please delete what you can without using a screwdriver. PC card, battery and so on. If you have 2 mem cards remove one.
  When everything is there, try to restart the device. Keeps blinking? If you had 2 plates of mem, remove the still inside and install another one in another location. Try again. Always the same?
  So I guess that there is a physical problem with the machine.

  If the machine starts normally, try turning off and to reconnect one removed items at once turn on the machine after each reconnection.
  Test them one by one and see if you can find out if there is a specific that causes this problem.

  Good luck!

  Tom

• A30 won, t start

  Hello. I'm new on this forum, but I need help. When I turn on my Satellite A30 it won't start. I get the: in touch with toshiba on the screen, then the fan starts but it won't start. I get this message on the screen: PXE - E61: media test failure, check cable of
  PXE - MOF: exit ROM PXE.
  John was soon

  Hi Mustafa,

  In the BIOS settings, you should have an option called "Memory of UMA", which should show that 64 MB. This is the memory allocated to your graphics card and is main part of RAM of the laptop.

  If you choose this item it should display the options available in 16 MB, 32 MB, 64 MB and 128 MB. use the arrow keys to change from 64 MB to 128 MB., then save settings and exit. On re - start your available RAM will be reduced by the additional 64 MB, which will be reserved for your graphics card.

  HTH

• Satellite P300-156 won't start or by MAIL

  Hello

  I have a Satellite P300-156 I bought a few months as damaged. The screen has been damaged and the case slightly cracked. I replaced the screen and hard drive and main card seems to have no physical damage. I've been running this system for 3 months now without any problem but, today, for some reason, it won't start or even POST. It powers on and the CPU fan starts to turn then stops and does nothing. No display (I tried external). CD player works. No beeps.

  I tried reinstalling RAM even open completely and reinstalling all connections, nothing done. Does anyone have an idea what component is gone? (CPU/GPU/RAM)

  Any help would be greatly appreciated

  Thank you

  Did you update the BIOS or something?
  For me, this is a normal behavior when the BIOS chip is faulty.