2540 cartridge error HP all-in-one office under windows 8 will not be printed

Similar Questions

• Windows email will not be printed and give this message "email error unexpected call to the method"

  Windows email will not be printed and give this message "email error unexpected call to the method"

  is there a solution for this?

  Yes, I uninstalled the upgrade to IE9 and rebooted and unfortunately I can print my email again! No more unexpected call to the method.  Check my IE and it's IE8.

  Problem solved!

  Thanks for the replies.
  Neal

• Fatal error when installing the Photosmart all-in-one software on Windows 7 x 64 for printer C4385

  Hello

  I had to reformat one of my laptops and as a result, reinstall the Photosmart software & drivers for my printer C4385. I downloaded the software from the HP website (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76047-2&cc=us&dlc=en&lc=en&... =).

  However, during the installation, I get on a fatal error in the last step, "product Configuration".  I uninstalled and reinstalled several times with the same result.  As you can imagine, I am really frustrated and seeks help from the community to solve this problem.  Here is a screenshot of the error.  Your help in solving this problem is greatly appreciated.

  

  Hello

  I see that you have a problem with the printer.

  I suggest you to install the software one. Go ahead and uninstall the software first and then follow the instructions below.

  You should get to a point in the facility, which looks something like this. Please click on the area where the yellow arrow.

  

  Once you do, it will look like this. Please install each driver one by one, starting with the first options which is the printer driver. You have to disable each option, that some of these drivers will not let you uncheck which is very good.

  Once its finish, you can go back and do the following installation.

  

  Let me know the results.

• HP Officejet J4680 series: all-in-one HP Officejet J4680 series will not print Word documents

  My HP Officejet J4680 all-in-one ink jet printer will not print in Word 2010 documents. It will print .pdf and Excel 2010 documents. I ran printing HP and doctor Scan and check it and put to date and said all is fine. Just around checking on my computer it said in the devices that the printer is ok. I printed the test from the doctor of Hp Plug and it came out ok. Seems so that Word documents are the only problem. I installed Windows 10 earlier so not totally sure that's the problem I don't remember if I used the word since installation up to now.

  I bought this printer in 2010 and have had no problems with it and I can tell you that I have printed a large NUMBER of pages.

  Any ideas how to get this printer working?

  Thank you!

  Hey @Ric88xx, welcome to the Forums of HP!

  I'd love to help you with your JO J4680. I understand that you are unable to print from Word, but you can print the PDF and Excel. Please use the following article from Microsoft to solve the problem and I would like to know the results of your efforts: How to troubleshoot printing in Word failures.

  If this resolves the issue, please click Accept as Solution button below. If the problem persists, let me know and I will do everything I can to help. Thank you.

• HP PSC 1350 all-in-one driver for Windows 7 - driver not included!

  My Windows 7 64 bit is supposed to have the included driver for my HP PSC 1350 all-in-one, but he's not here. When I use the "Add Printer Wizard" single PSC series included is 1500 and 1600. I don't have the installation disc (this is a printer to work and they don't give me the disc when they gave me the printer). Now all the sites I go to driver to tell me that the driver is automatically included in my Windows 7, but it isn't here. Help!

  If I try to use the pilot for the series 1500 instead, I get a warning that my printer is working properly or that my computer may not work at all. Another driver which is compatible, or how can I download the correct driver?

  Yes, the PSC 1300 series includes the PSC 1350, this driver should work fine.

• V40 HP on office xp and is shared via the wireless network. laptop with windows 7 will not be printed on v40.

  Cannot print from laptop (windows 7) via the wireless router desktop (windows xp) with attached usb HP v40 .for all-in-one.

  (7) - wireless laptop router - desktop (xp) - usb - HPv40

  Has worked for laptop is running xp.

  Laptop of the coils of print job at the office and apparently complete, but the bureau simply ignores the print job.

  No error message.

  printing from office very well.

  I reported this as resolved. I submitted this problem. The problem started when the update of my laptop computer from Windows XP to Windows 7. When I did, the Lexmark printer to my desktop worked find with the new system of the laptop. The HP V40 has failed. The Office has just received each print job submitted from the laptop (via a local wireless network) and scrapped it. I could see the print job come in the V40 print queue and could disappear.

  Here's what I did to solve the problem:

  I tried a dozen or so combinations of withdrawal and installing the printer on my Windows 7 laptop and my Office Windowx XP (with the V40 attached via USB) and manually removing and installation of printer drivers on my desktop PC, it works finally. What have I done? I have no idea, but I think that deleting manually pilots v40 on the office was part of the solution. While view printers available on my XP desktop computer, I clicked on file and one of the tabs has led me to a place where I could remove the drivers for each printer (I just removed them for the V40).

  Here's what I DIDN'T DO:

  I'm not following the advice of the HP support person I contacted by phone. This Board had to reinstall Windows XP on my desktop. That clearly was not the problem when I talked to him. But he would NOT listen to reason. Luckily I have enough knowledge to know PC than its low of false tips

  I am pleased with the resultant availability of the V40 again.

  I have no idea how to officially close this problem.

  I would be happy to discuss with someone else who has a similar problem, but when I submitted this problem with my name and email address, the moderator has deleted my presentation of the problem. Therefore, I think that all those who want to know more is out of luck.

• Microsoft office for windows 7 will not download

  Thus, after Windows 10 has been downloaded without authorization on our laptop ASUS and nearly a week of the struggle of the community looking for a solution, that I got ASUS was the F9 recovery.  Of course the Office package that we bought to be reinstalled and now it is our problem.

  I used the disc and then tried to follow the instructions which had to do a microsoft office activation.  The Wizard no longer supports this and we would like to be able to use Office without having to buy another product.  Is there a solution?  I don't want to be told how great Windows 10 is.  We have already on another computer.  I am looking for a way to download the 2007 disc that I or another solution that does not involve buying more things than we are on a fixed income.

  Then run setup.exe and screen 2010 opens with 4 choices.  Enter the product key, enter the preferred type continue the configuration process, full reboot, Setup and... it worked.  I'll have to stop taking the words of my husband for stuff that doesn't work do not.  When I installed it, it worked fine.   Thank you

• HP psc2100 series all-in-one: printer was working fine, all of a sudden its impasse on copy and will not be printed said export error

  computer printing problem saying "Error exporting" and printer saying just 1 copy.  I tried troubleshooting on mine, doesn't have the verified maintenance on the printer, but still saying error. Help, please!

  Hi @kelley22,

  Welcome to the HP Forums!

  I see that your HP PSC 2100 printer is stuck on copy and will not be printed on Windows 8. I'm happy to help you!

  The first step, I would like to recommend is a hard reset. Please see this message, How to perform a hard reset, by @Rich1. It is very important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. See this article, questions when it is connected to an uninterruptible power supply/Strip/surge protector power, for more information. This is true for printers and ink jet.

  Once this step is finished, please try to print a self-test report, to check the printer hardware is fully functional.

  To print a self-test report, follow these steps:

  • On the product control panel, press Setup.
    The installation menu appears.
  • Press the right arrow ( ) until print report displays and then press OK. The menu print report appears.
  • Press the right arrow ( ) until the self-assessment report and press OK. The self-test report prints.

  If the test report print, then on the computer, please try our HP print and Scan Doctorand let me know what happens!

  Hope this helps and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Officejet 8500 a e-all-in-one: Officejet 8500 A progressively less black ink prints

  Greetings,

  I have an Officejet 8500 a e-all-in-one, which was a little finiky when it print black ink. It prints well in the morning and for most of the day, but sometimes late in the afternoon, it will print progressively less black ink until it stops completely. When he is left alone during the night, it will start printing without any problems again in the morning. The amount that we will print does not seem to have an effect. It will do the days where we printed almost anything just as often we are printing constantly throughout the day.

  There is a laptop connected via the USB port and two other people who connect via radio. A computer has 10 64 - bit Windows, Windows 64 - bit to 8.1, the last is a macbook. Printing problems are are produced through two connections.

  There is no problems with the ink cartridges, they are brand new and in Full ink levels report.

  The printer has aligned the printheads several times with success.

  I ran to the printhead cleaning several times and it had no effect.

  I took the print heads and cleaned the contacts on the back and in the machine.

  There has been no error on machines or computers.

  At this point I'm not sure if it's a matter of ink clogged or if it is somehow overheating.

  Hi pyrakitt,

  If the steps described in the guide I provided did not resolve your problem, I would certainly consider replace the printhead (s), or the upgrade of the printer. Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that answers your question and have a nice day!

• HP 7210 all in one - will not be printed on the fast project configuration

  For the last two weeks, my 7210 HP all-in-one has decided that he does not want to print on quick project more.  I have the default settings of the printer on quick project, and I even went and edited individual documents to ensure that they are on the quick project, but it still prints on quality.  I do a ton of printing on a daily basis, and that is to kill my ink, not to mention how long it takes.  My OS is Windows 7, 64-bit.

  Hey @kmh1883,

  Thanks for getting back to me on this subject "fast draft" with your HP Officejet 7210 all-in - One Printer. Even if printing HP and doctor Scan found no problem, it seems that you may have a driver conflict. I would like to try another driver at the moment to see if this clears up your printing problems.

  How to add another driver:

  1. Click on the Start menu
  2. Select the devices and printers
  3. In the devices and printers folder right click on your HP Officejet 7210 and left-click on properties of the printer
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  9. After selecting Deskjet 9800 hit next complete the new driver Wizard
  10. Under the printer properties window, select 'Apply' but do not hit OK
  11. Select the general tab
  12. Rename your printer in HP Officejet 7210
  13. Click OK
  14. Finally, right click on your HP Officejet 7210 one more time and left-click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its project of Fast
  17. Press apply and OK

  Test print from the print driver Deskjet 9800 replacing to check if the setting "Fast Draft" remains.

  Please let me know if this solved your problem. Good luck!

• How to install software for hp photosmart c5390 all-in-one on a windows 7...

  How do I install the software for HP Photosmart C5390 all-in-one on a windows 7. I don't have software cd for vista and mac.

  Hi Matt, thanks again for your quick response - which is certainly service 5 stars! Everything works fine now. I just got myself this new laptop - my first HP (Hp Pavilion DV7 6 c 80) and it is excellent, and I'm slowly he get it all set up. I can be naughty and ask you another question? I've (obviously) set up my hotmail on my HP. Do you know how I can remove my files from my old Toshiba Hotmail. I am giving my girlfriend and I want to set up his mail pop3 on it. Whenever I log into windows live mail on the Toshiba, my hotmail more old e-mails coming up on the screen.

  many ways, Ragnar.

• Total number of pages printed on printer e-all-in-one-hp officejet 6700 premium do not match

  Printer model: hp officejet 6700 premium e-all-in-one

  OS: windows xp, service pack 3

  Method of connection: network

  Description of the problem: number of page do not match

  If I double click on the "hp officejet 6700" icon on my desktop.

  Then click on "view the ink level.

  Then click on the reports of the device"" tab.

  Then click on "check printing.

  The report provides: Total number of printed Pages 8159

  If I double click on the "hp officejet 6700" icon on my desktop.

  Then click on "view the ink level.

  Then click on the "devices" tab

  Then click on "printer ews home page."

  Then click on the 'Tools' tab, I see:

  Total number of pages

  6725

  Difference = 8159-6725 = 1434

  Can someone tell me why these numbers are different? They represent different totals?

  MelanieHello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have questions about your number of pages.  I would like to help.

  The built-in web server does not account for pages printed not across the network.  The number of printer pages all the elements. 1434 pages were not printed through the network, therefore, not counted in the SAP.

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• Windows Vista Home premium all-in-one is downloadable windows 10

  Windows Vista Home premium all-in-one can download windows 10 and run it because I have a windows vista Home premium service pack 2.

  Information system

  

  I've heard rumors that you can download windows 10 on windows vista and I don't know if its true or not but I also people saying that windows gives 10 free windows for windows vista and windows XP

  Hello

  You buy Windows 10, as there is no free upgrade to Vista 10.

  https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

  Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

  http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• I have a 7410 all-in-one printer. Is power on but it will not be printed.

  I have a 7410 all-in-one printer, the power is the printer turns on, but when I push the printer button on the light does not come on and it will not be printed. Is there a reset somewhere button? Any suggestions

  This is usually caused by a failure of the wireless LAN card.  You can solve this problem, as shown on this page.  Unplug the connector on the wireless card will disable wireless and correct the problem.  Since you're using USB shouldn't be a problem.

• HP Photosmart c7280 all-in-One vs. Windows 7 32 bit Home Premium - will NOT PRINT!

  I recorded more than 6 hours trying to get this thing to print.  It does not print.  Tried the wireless, USB, Ethernet, NOTHING!  My laptop Lenovo detect it when I plug in the USB cable, downloads, everything he needs, it's good to go, without errors, convenience store can not find something.  When I try to print something, the printer icon appears in the taskbar, but when I scroll over it, it says '0 documents pending' then it disappears eventually.  The only thing that I could print are the test page & page of the HP Toolbox diagnostics software help page.  When I try to print from any other program, it will not be printed.

  I downloaded and installed all the patches, updates and even reinstalled the software that is supposed to be compatible with WIndows 7.  I'm tired, I'm in a bad mood, I'm about to give up AND do what they hope, I'll do and just buy a new printer.

  I browsed all the forums here and done everything someone suggested.

  Have you installed the driver http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3204785&lc=en&cc=us&dlc=en&lang=en&cc=us star