2D adapt: a question to Mr altenbach

Similar Questions

• Satellite M40X-183: AC adapter & battery question

  Hi guys

  I would like to ask questions on * TOSHIBA satellite M40X-183 *:

  (1) what is the compatible adapter for it?
  (2) what is the compatible battery for it?
  (3) where can I buy the AC adapter / CC & battery to the United Kingdom?

  Thank you

  Hello

  Some Satellite M40 eventually are also Satellite M40X PA3395U-1BRS-battery (Li-ion, 8 cells, 4300 mAh)-compatible and adaptor PA3471E-1CHG.

  All these parts are in the net.

  Of course, you can order it as the local ASP.

• AC adapter connector Question

  Hello. I have a t400 with a 90-Watt power supply. The connector of the adapter seems to be exhausted because insulation is heartbreaking and small son are coming out. Also when moving the laptop while it is plugged, it teeters between the battery and AC power.

  Here is a picture of the damage

  Link to photo

  So my question is, is - it safe to continue to use this charger with damage them my laptop? Thank you.

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  I would recommend that you stop using this adapter and get a new one.

  A short circuit may cause the adapter to ignite, or your motherboard is fried.

• Adapter LAN question, "no access to the network.

  Original title: LAN adapter issue

  Hi all, when connecting my laptop to a switch of the LED on the switch is green which means connected. The IP address on the laptop is entered manually, but when will the cmd and issue ipconfig it shows "media disconnected" and the network adapter in the Control Panel indicates "no access to the network. It also indicates that "this device is working propoerly! Please advice

  Hello

  What is the number and the model of the computer?

  Remember to make changes to the computer before the show?

  Thanks for posting in Microsoft Communities.  The problem description, I understand that you can not connect to the Internet.  Correct me I misunderstood the question

  Follow these steps:

  Method 1: Follow these steps:
  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

   

  Method 2: Follow these steps:

  
  Step 1: renew DHCP Dynamic Host Configuration Protocol)
  a. click Start, click run, type cmd and click OK.
  b. in the command prompt, type ipconfig / renew
  c. Close command prompt.
  d. check the result.

   

  Step 2: Try to obtain an IP address automatically
  a. open Internet Explorer, go to Tools, click on Internet Options, connections, LAN settings.

  b. uncheck all boxes except automatically detect connection settings
  c. click OK to apply the changes.
  d. check if the problem persists.

   

  Method 3: If the methods above do not help, check if the wireless card is very well and try to update the drivers on the manufacturer's Web site.

  a. click Start and right-click my computer.
  b. Select Properties and then click the hardware tab.
  c. click on Device Manager and expand network adapters in the list.
  d. right click on the adapter, then click Properties.
  e. click the driver tab and click Update the driver.

  Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

• adapter Wireless Question

  I have a Dell Dimension E520 with a Netgear WPN (TM) Wireless PCI array adapt

  I need to update and buy another. I have ultimate Time Warner cable 50mbps, but I get only around 15 Mbps of download speed test

  I am running Windows 7 64 bit

  My question is... Should which adapter I? model # and brand

  Best bang for the buck is 802.11 N USB based better antenna.  Relative speed depends also how far away you are and how many obstacles, are between you and the router.  You seem to be also confuse MEGABITS per second to MEGA BYTES per second, that is almost 10 x difference.  15 meg is the right speed. You are also faster than the slowest connections.  Nothing more 1.5 Meg in both directions is great for video streaming etc..  At 300K per second he starts stuttering and buffering and underneath, it stops, and then crashes every 25 seconds.

  http://www.Amazon.com/NETGEAR-n300-Wi-Fi-adapter-WNA3100/DP/B003G2Z1M6

  A more expensive 802.11 air conditioner will be no faster than if you spend $100 or more on a 802.11ac router.

• RTMP Adaptive switching question

  Hello Mr.

  
  

  I create a flash player using osmf plugin and smilplugin code I found (ofhttps://getstreaming.wordpress.com/2011/05/27/dynamic-streaming-test-drive/#comment-349).

  
  

  I have a problem when playing SMIL file in my "player customized" through wowza media server.

  The question is adaptive switching does not work in my custom player if RTMP protocol, but my custom player play more smil with Adaptive url switching and manual switching (@! http://mediapm.edgesuite.net/OVP/content/Demo/SMIL/elephants_dream.SMIL ).

  and also play HDS and HSL streaming through wowza media server.

  I appreciate your help.

  sample smil file which I use for below Wowza

  <? XML version = "1.0" encoding = "UTF-8"? >

  < smil >

  < head >

  < base meta = "_definst_/vod / rtmp://127.0.0.1:1935" / >

  < / head >

  < body >

  <>switch

  < src = 'mp4:main360.mp4' video system-bitrate = "200000" / >

  < src = 'mp4:main720.mp4' video system-bitrate = ' 480000 "/ >"

  < src = 'mp4:sample.mp4' video system-bitrate = ' 720000 "/ >"

  < / switch >

  < / body >

  < / smil >

  Hello

  Please use following methods to play RTMP SMIL-

  private var dynResource:DynamicStreamingResource;

  private var tracingNetLoader:TracingNetLoader;

  private var element: VideoElement;

  private void createSMILObj(str:String):void {}

  try {}

  var objSMIL:Object = createSMILObj (str); Function give below

  var obj:Object is objSMIL ["files"];.

  var fileLen:Number = getObjLen (obj); function given below

  dynResource = new DynamicStreamingResource (String (objSMIL ["baseURL"]));

  vector = new Vector. (fileLen);

  for (var i: int = 0; i

  Vector [i] = new DynamicStreamingItem(obj[i].src,obj[i].bitrates,obj[i].width);

  }

  dynResource.streamItems = vector;

  tracingNetLoader = new TracingNetLoader();

  element = new VideoElement (dynResource, tracingNetLoader);

  initPlayer (element);  Pass this object OSMF element and play the video.

  } catch (error: Error) {}

  trace ("detected in the SMIL XML loading error")

  }

  }

  public static void createSMILObj(_str:String):Object {}

  var baseUrl:String;

  var smilXML:XML;

  var videoList:XMLList;

  var mainObj:Object = new Object();

  var fileObj:Object = new Object();

  var str:String;

  var tempArray:Array = _str.split (')");

  var tempStr:String = String (")"+ tempArray [1]);

  Str = String (tempStr) .split (")<><>

  Str = Str.Split (")

  Str = Str.Split ("System-Bitrate"). Join ("systembitrate");

  smilXML = new XML (str);

  baseUrl=smilXML.head.meta.@base;

  trace ("base =" + baseUrl);

  videoList = smilXML.body.switchs.video;

  try {}

  for (var i: int = 0; i

  .@width fileObj[i]={src:videoList[i].@src,bitrates:videoList[i].@systembitrate,width:videoList[i]};

  }

  } catch (error: Error) {}

  trace ("error detected in SMIL XML File Update...")

  }

  mainObj ['baseURL'] = baseUrl;

  mainObj ["files"] is fileObj;.

  Return mainObj;

  }

  public void getObjLength(obj:Object):Number {}

  var number: number = 0;

  for (var id in obj) {}

  counties ++;

  }

  return of the counties;

  }

  Best regards

  Sunil Kumar

• Satellite C870 - 11G - AC power adapter compatibility question

  I have a C870 - 11G.

  It uses power adapter part no PA3917U-1ACA, who recently became damaged when someone tripping over the cable and it bends the end that connects to the laptop.

  I used to have a Toshiba C660D-10W a few years ago and the power for this laptop adapter you still, even part no PA3714E-1AC3,.

  Does anyone know if this is compatible with my C870?
  It seems to fit but I wanted to try it incase it damage the battery or something.

  Any advice will be greatly appreciated.

  On the first picture you can see the values:
  * 19V * (v) * 3.42A* (Ampere)
  On the second picture, you can find the same values.

  If two adapters providing the same volt Ampere and should be compatible.

• Toshiba 32RL933 - what wireless adapter I can use?

  Hello

  I have a macbook pro (latest version) which has intel WiDi and my tv has intel WIDI also remind that I could use the one I have in my house, but as I understand it, it is that I need a wireless adapter.

  I have one here at home, but it didn't work. (d-link dwa-140)
  I was wondering if it was my mistake, or if this adapter in question does not work on my TV.

  I would also like to know if the only one that works is the toshiba adapter or y at - it one adapter other than the toshiba that works.

  Thank you

  flaviotobi, after having read pages 13, 48 and specification of the pages (81), the manual of your model TV, (32RL933), the manual of English to me, at least, indicates that only the Toshiba dual-band wifi adapter is suitable for wireless networks and functions of WiDi.

  In my opinion, the use of the available USB only is a concern, this does not allow the use of the function of time-shift TV, because this feature requires the use of a flash or connected USB HARD disk drive.
  It is my opinion that the time shift function is more convenient than having the WiDi or wireless network card and find the cable system without problem, in my case.

  If I want to display anything from my laptop on the TV, I use HDMI, (via a HDMI auto-box switch), because I have multiple devices share available on my 32RL900A sockets and having only a USB taken is a little embarrassing, but as I have said in other forums, we buy what we can afford...

  donhe7

• Satellite L300 will not Windows load when using AC adpater

  L300 I used for 2 1/2 years has now developed fault because it will run when it is connected to the power supply - it won't start Windows. Laptop will charge of battery and then as usual using the battery. Then when connect it powers down and no sector will not start Windows.

  It is fine if I want to use that 2 hours and then recharge the battery and restart then disconnected from the main supply - which I did not I can't keep charging every 2 hours.

  I have reloaded windows with all updates of nominal and have tried to use different power adapter - same question.

  I do not understand why the L300 charges & works by using the battery, but does not work when it is connected to the power supply?

  Has anyone else had a similar problem? or knows how to solve?
  Do I need a BIOS update? or is it a more serious problem that does not work the power regulator?

  > Laptop will charge of battery and then as usual using the battery

  Hmm its strange usually if the AC adapter is defective, then s battery should not charge it is difficult to believe that this matter would be linked to the faulty adapter. In my opinion it of mobo problem and the solution might be an expensive

• Satellite P300 does not load

  Hello.

  I have Toshiba Satellite P300. It's almost 4 years.
  However, 3 months ago it started not not to charge the battery. I removed the battery and the computer left only with the adapter.
  Now it does not charge to one, I have to wait until electricity or sth will reach a level to start the computer.

  So, please help, if anyone has had similar problems or know the reason why and what to do.
  Maybe its adapter problem, or something wrong with the connection between the adapter and the pc. I don't know and have no money yet to check it out.

  Someone knows what's the problem? Thank you.

  Hello

  These issues can be related to different reasons;
  -AC adapter problem
  -Question-motherboard (I especially m thinking to provide electronic problem)

  But I don't think it could be malfunction AC adapter because the laptop can lights after either a specific power level reached or laptop can start after a longer time being connected to the power adapter. Is this good?

  Well, looks like a mobo problem but it's just a suggestion
  The parts must be checked first, before replacing

• Battery must be removed or not?

  I just bought a new HP 8570W laptop and I need to know how to handle the battery. My laptop is the msot of the time connected to the a/c adapter, the question is: should I remove the battery and connect only when you plan a trip?

  Generally speaking, the management of the laptop battery to keep it safe and in good condition? What are the best rules to recharge? I do not understand whether the battery is maintained under when he reached 100% of load or disconnects automatically it is removed.

  Thank you for any assistance. Best.

  Yes No more is an appropriate option, personally, I prefer now in and using at least once a week or more, as I found my staff & workbooks that it tends maintain cells healthier longer.

  With this option you are the best to vary the amount you use each discharge rather than keep it discharge roughly the same discharge level of say 50 to 70%, as the full charge of ocasional 15 to 20 percent will make the right cell & keep the higher lifetime capacity.

  With the option of storage in my view, State of charge of 40 to 50% is the best, I tend to go for 50% and have stored batteries from 2 to 6 months.

  Go with which option suits your needs better and not worry too much in the form option if performed well will be better than the effort of the average user on the battery maintenance ;-)

  Cycle count should not be a problem if you need use the battery then use him as extreme concern of charge cycles how you gets rather ridiculous in the real world, the problem is County of cycle on like HP and acer are low, as the quality of the cells is low & heat machine is strong the battery is superior and they put the lower title.

  As an example of our work books used out of Office charge about 300 cycles per year so that we at least 2 years on the low quality of the cells with cycle count as our probooks but our thinkpads have made more than 3 years.

  With HP normally, rebuild us the battery if the casing in good condition and reset the smart as control panel get cells better that way compared to hp OEM or aftermarket predefined options.

• Laptop to TV wireless - for Photo viewing

  wasn't sure what sub-forum to post, to chose this one large participation,-home computers are wireless network, to display pictures on our TV - but the TV manual does not whether it is connectable internet and this seems to be a requirement of the Universal Media Linksys WiFi connector adapter

  question: is there a way to make internet connectable?

  Thanks to those who respond!

  If your TV has no LAN port or built in wireless, then no you can't connect it to your router.

• Media Center won't play by video converter USB error ""files needed to display video are not installed or not working properly. " Restart the computer or Media center.

  I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor. What is the problem? Can it be fixed? I use questions cable 'Câble questions SuperSpeed USB 3.0/2.0 to HDMI/DVI for Windows and Mac up to 2048 x 1152/1920 x 1200' with windows 7. Is there another brand and model that works?

  On Wednesday, September 3, 2014 13:19:09 + 0000, CharlesHickox wrote:
   
  > I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor.
   
  I assume you mean WTV and not the WMV files? Likely the reason is that the adapter
  questions of cable is not HDCP compatible. (Rules of DRM Media Center
  apply).
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• The width of the preview in Windows Explorer screen can be hung on the left side instead of the right side?

  Whenever I open a Windows Explorer window, the preview window to adapt is questionable.  It is anchored on the right side of the window.  Sometimes it's fine, other times, it covers more important data like date/time and file size.  If I have it full screen on my wide screen, everything is great, but when I throw it in my smaller screen, everything must shrink.  Rather than shrink the preview pane, it allows the preview pane cover the most important areas.

  The width of the preview in Windows Explorer screen can be hung on the left side instead of the right side?

  I don't think it can be docked to the left.  I know that the sector details can twisted to put it on the bottom rather than the side (like Vista/7), but the preview pane itself isn't such a tweak.

• Tecra M1: Question about 21003B wireless adapter

  I have a Tecra M1 with 21003B wireless adapter. Company connection to one of our Wi - Fi points poses no problem - stay connected is a science.

  All the 1-2 hours all Wi - Fi access points 'disappear' app to auto-detection. The only way to reconnect is to disconnect XP (SP2).

  Any ideas?

  Hello

  Well, this really strange question. I found on the site of Toshiba four different
  WLan drivers. I suggest trying another driver, maybe this will help.

  Best regards