2Uplinks SF300-24, 2 class IP config?
If sf300-24 can config, how?
Thank you
Hi Bob,
Simple, you create another VIRTUAL local network, for example the vlan 2
F13 to F24 AND G2 ports do not identified in the VLAN2
step 1. Make sure you run the latest version of the software package for the SF300-24 (available for free). Upgrade if necessary.
Step 2 You have the choice of using the GUI or the command line interface.
So here's the screenshots on my SG300 - 28 p, but the configuration steps are identical to the SF300-24.
Step 3 Create the new vlan
Step 4. Arrived at the interface tab, select vlan2 and click OK.
Step 5 Now enter your ports as being members not marked vlan2 according to the screenshot below.
Step 6. Save your configuration (took me more time to create this response actually carry out the work.
or if you are running the latest version of the firmware of the switch when you buy the switch, or update the firmware you want you can try the method of the CLI.
In the cut and paste it below, I replaced "gigabitethernet' with 'fast' in the example below, because I was using a gigabit switch for my setup
User name: cisco
Password: *.
Please change your password from the default settings. Please change the passwor
d for better protection for your network. You want to change the password (Y/N) [O]? N
switch4cf17c #conf
database of VLAN
VLAN 2
output
hostname SG300 - 28 p
No complexity of passwords allow
No server snmp Server
serial fast13-24
switchport vlan trunk native 2
output
interface gigabitethernet2
switchport vlan trunk native 2
output
interface vlan 2
name blue
output
output
SG300 - 28 p #copy run start
Replace the file [startup-config]? [Yes / press any key for no.]...
As simple as that.
Best regards, Dave
Tags: Cisco Support
Similar Questions
-
the shape command does not display under the default class map-class
the form of traffic control is still missing in Touzé-default class-map
Policy-map rtp ASA (config) #.
Class ASA(config-pmap) # by default
ASA(config-pmap-c) #?MPF policy-map class configuration commands:
exit the configuration for the class action MPF mode
help help for orders sub-mode of MPF policy-map class/match
inspect inspection of protocol services
No Negate or default configuration of a command values
Exit out of the configuration for the class action MPF mode
set connection values SetWell Yes, 7.2.4 and 8.0.4 introduced the command.
Then it has no 8.0.3.
I think it is clear now.
Please mark it as answered if it is to future benefits of others.
RGS,
PK
-
N3048 vlan trunk band guaranteed bandwidth
Hello
Ive got 2 batteries of n3048 which will be connected by a link of fiber shds 1 Gbps, there are several local networks virtual on each stack and some of them I want trunk on the binding fiber.
an of vlan is for a balanced load diversely routed internet connection, there is a router on each site with 100 Mbps bandwidth, but also firewalls at each site that will be in the same vlan.
I don't want no internet to run slow because something is hogging the bandwidth on the shds, so the question is how can I guarantee 100 Mbps of traffic for vlan 10 through the shds with us other traffic crossing of vlan?
I have install other powerconnect switches and switches cisco with trunking VLANs between switches but I've ever done where I need to ensure a slice of bandwidth with QOS?
I'd appreciate any help or advice to achieve this
Thank you very much
Hi Daniel,.
Sorry for the late reply its been a bit choppy on other projects so just had time to test this out.
Here's what I ended up using in the config:
Console (config) # class - match-all card VLAN_10_MATCH
Console (config-WCPA) # match vlan 10Console (config) # VLAN_10_MARK policy-map on
class console(config-Policy-classmap) # VLAN_10_MATCH
Console(config-Policy-classmap) # brand cos 5Console (config) # int item in gi1/0/48
Console (Config-if-X/Y/Z) # classofservice trust dot1p
Console (Config-if-X/Y/Z) # classofservice dot1p-mapping 5 3
Console (Config-if-X/Y/Z) # cos - min - bandwidth tail 0 0 10 0 0 0 0
Console (Config-if-X/Y/Z) # cos - queue strict
Console (Config-if-X/Y/Z) # - political service on VLAN_10_MARKI applied the same configuration for the trunk on two piles of switch port
Thanks for your help in pointing me in the right direction
I used jperf on 2 laptops in VLAN 10, 1 in each switch then your laptop on the other switch into a vlan with jperf mode server and 3 computers, send traffic using jperf him around the trunk and which seems to work well. ive tried run qos traffic vlan first and then maxing the bandwidth through the traffic trunk vlan qos not and then vice versa with traffic vlan qos to a already maxxed bandwidth through the trunk and he still gave him its bandwidth of 100 Mbps in both scenarios.
concerning
-
I see the entrance to the newspaper below on a VPN3000:
___________________________________________________
17373 03/17/2004 16:09:47.530 SEV = 5 RPT AUTH/36 = 651
Protocol user [Unknown] [SNMP] attempt to logon ADMIN...
Status:
! ____________________________________________________
I do not see why SNMP would never connect as administrator. My first thought was that it was an attempt of unauthorized access. However, I see these journal entries about once every 30 to 50 seconds. Because it says "access granted" an attempt to access would probably stop when given access.
No one knows what may cause this?
Thank you
Eliot
These are caused whenever an SNMP packet is sent to the VPN3000, usually, you'd have a HPOV, or some other management station that seeks to SNMP queries the 3000.
To get rid of them, you can define the class event AUTH for only newspaper 4 sev and higher bugs. Go to events - Classes - system - Config, add the AUTH class and its severity in the journal to 1-4. They would stop.
-
Site to site vpn errors.
When you configure a site to tunnles, I get errors in logging of ASA of gall.
I've included the two configs on the walls of ASA file.
any one see what Miss me?
small site
: Saved
: Written by usiadmin at 15:22:08.143 UTC Monday, March 19, 2012
!
ASA Version 7.2 (3)
!
hostname smallASA
domain.com domain name
activate awSQhSsotCzGWRMo encrypted password
names of
!
interface Vlan1
nameif inside
security-level 100
IP 10.16.4.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 116.12.211.66 255.255.255.240
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
L0Wjs4eA25R/befo encrypted passwd
passive FTP mode
DNS lookup field inside
DNS server-group DefaultDNS
Server name 10.10.20.1
domain.com domain name
access extensive list ip 10.16.4.0 outside_1_cryptomap allow 255.255.255.0 any
access extensive list ip 10.16.4.0 inside_nat0_outbound allow 255.255.255.0 any
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 523.bin
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 116.12.211.65 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
http 10.16.4.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 12.69.103.226
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 20
Telnet 10.16.4.0 255.255.255.0 inside
Telnet timeout 5
SSH 10.16.4.0 255.255.255.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
dhcpd dns 165.21.83.88 10.10.2.1
dhcpd domain domain.com
dhcpd outside auto_config
!
dhcpd address 10.16.4.100 - 10.16.4.131 inside
dhcpd allow inside
!
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
usiadmin encrypted DI5M5NnQfLzGHaw1 privilege 15 password username
initech encrypted ENDpqoooBPsmGFZP privilege 15 password username
tunnel-group 12.69.103.226 type ipsec-l2l
IPSec-attributes tunnel-group 12.69.103.226
pre-shared key, PSK
context of prompt hostname
Cryptochecksum:e6bf95f3c25574bfed2adafb3283e882
: end
large site
: Saved
: Written by usiadmin to the 22:57:30.549 CDT Monday, March 19, 2012
!
ASA Version 8.0 (3)
!
hostname STO-ASA-5510-FW
domain.com domain name
enable the password... Ge0JnvJlk/gAiB encrypted
names of
192.168.255.0 BGP-Transit_Network description name Transit BGP
name 10.10.99.0 VPN
name 10.10.2.80 BB
DNS-guard
!
interface Ethernet0/0
Inside the Interface Description
nameif inside
security-level 100
IP 10.10.200.29 255.255.255.240
OSPF cost 10
!
interface Ethernet0/1
Description external Interface facing the Rotuer for Internet.
nameif outside
security-level 0
IP 12.69.103.226 255.255.255.240
OSPF cost 10
!
interface Ethernet0/2
Description physical interface trunk - do not use
No nameif
no level of security
no ip address
!
interface Ethernet0/2.900
Description Interface DMZ 12.69.103.0 / 26 (usable hotes.1 a.62)
VLAN 900
nameif DMZ1-VLAN900
security-level 50
IP 12.69.103.1 255.255.255.192
OSPF cost 10
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 10.10.5.250 255.255.254.0
OSPF cost 10
management only
!
L0Wjs4eA25R/befo encrypted passwd
banner exec **********************************************************************
exec banner STO-ASA-5510-FW
exec banner ASA5510 - 10.10.200.29
exec banner configured for data use only
banner exec **********************************************************************
banner login **********************************************************************
connection of the banner caveat: this system is for the use of only authorized customers.
banner of individuals to connect using the system of computer network without permission.
banner login or exceeding their authority, are subject with all their
activity of connection banner on this system monitored and recorded by computer network
staff of the login banner system. To protect the computer network system of
banner of the connection of unauthorized use and to ensure that computer network systems is
connection of banner works properly, system administrators monitor this system.
banner connect anyone using this computer network system expressly consents to such a
banner of the connection monitoring and is advised that if such monitoring reveals possible
conduct of connection banner of criminal activity, system personnel may provide the
evidence of connection banner of such activity to the police.
connection banner that access is restricted to the authorized users only. Unauthorized access is
connection banner, a violation of State and federal, civil and criminal.
banner login **********************************************************************
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS server-group DefaultDNS
domain universalsilencer.com
permit same-security-traffic intra-interface
object-group service SAP tcp - udp
Description SAP updates
port-object eq 3299
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service HUMANLand tcp
port-object eq citrix-ica
DM_INLINE_TCP_1 tcp service object-group
EQ port 5061 object
port-object eq www
EQ object of the https port
DM_INLINE_TCP_2 tcp service object-group
EQ port 5061 object
port-object eq www
EQ object of the https port
DM_INLINE_UDP_1 udp service object-group
EQ port-object snmp
port-object eq snmptrap
object-group service DM_INLINE_SERVICE_1
ICMP service object
the purpose of the service tcp - udp eq www
the purpose of the udp eq snmp service
the purpose of the udp eq snmptrap service
the eq syslog udp service object
the eq 2055 tcp service object
the eq 2055 udp service object
EQ-3389 tcp service object
object-group service human tcp - udp
port-object eq 8100
object-group service grove tcp
port-object eq 2492
netflowTcp tcp service object-group
port-object eq 2055
object-group service 6144 tcp - udp
6144 description
port-object eq 6144
object-group service 1536-DMPA-inter-tcp - udp
1536-DMPA-inter description
port-object eq 1536
the DM_INLINE_NETWORK_1 object-group network
network-object 198.78.0.0 255.255.0.0
network-object 207.152.0.0 255.255.0.0
network-object 69.31.0.0 255.255.0.0
the DM_INLINE_NETWORK_2 object-group network
network-object 198.78.0.0 255.255.0.0
network-object 207.152.0.0 255.255.0.0
network-object 69.31.0.0 255.255.0.0
the DM_INLINE_NETWORK_3 object-group network
network-object 198.78.0.0 255.255.0.0
network-object 207.152.0.0 255.255.0.0
network-object 69.31.0.0 255.255.0.0
the DM_INLINE_NETWORK_4 object-group network
network-object 198.78.0.0 255.255.0.0
network-object 207.152.0.0 255.255.0.0
network-object 69.31.0.0 255.255.0.0
object-group service rdp tcp
RDP description
EQ port 3389 object
the DM_INLINE_NETWORK_5 object-group network
network-object 10.16.0.0 255.255.0.0
object-network 10.16.0.0 255.255.255.0
the DM_INLINE_NETWORK_6 object-group network
network-object 10.16.0.0 255.255.0.0
object-network 10.16.0.0 255.255.255.0
the DM_INLINE_NETWORK_7 object-group network
network-object 10.16.0.0 255.255.0.0
object-network 10.16.0.0 255.255.255.0
the DM_INLINE_NETWORK_8 object-group network
network-object 10.16.0.0 255.255.0.0
object-network 10.16.0.0 255.255.255.0
access outside the 207.152.125.136 note list
extended access list to refuse any newspaper outdoors the object-group objects DM_INLINE_NETWORK_1 TCPUDP-group
scope of list of outdoor access to refuse the object-group objects DM_INLINE_NETWORK_2 host 12.69.103.129 TCPUDP-group
extended access list to refuse the object-group TCPUDP outdoors any object-group DM_INLINE_NETWORK_3
scope of list of outdoor access to refuse the subject-TCPUDP 12.69.103.129 host object group DM_INLINE_NETWORK_4
access outside the note list * in Bound SAP traffic by Ron Odom update *.
list of access outside the scope permitted tcp host 194.39.131.34 host 12.69.103.155 3200 3300 Journal range
access outside the note list * router SAP *.
list of access outside the permitted range tcp host 10.10.2.110 host 194.39.131.34 3200 3300
extended access list permits object-group DM_INLINE_SERVICE_1 outside any host 12.69.103.154
access outside the note list * entrants to the mail server to 10.10.2.10 Peter K *.
list of extended outside access permit tcp any host 12.69.103.147 eq smtp
access outside the note list * incoming to the OCS EDGE on DMZ Peter K *.
access list outside extended permit tcp any host 12.69.103.2 object - group DM_INLINE_TCP_1
list of external extended ip access permits any host 12.69.103.6
list of access outside the comment flagged for malware activity
scope of list of outdoor access to deny the host ip 77.78.247.86 all
list of external extended ip access permits any host 12.69.103.156 inactive
list of extended outside access permit tcp any host 12.69.103.147 eq www
list of extended outside access permit tcp any host 12.69.103.147 eq https
access outside the note list * incoming hosting 10.10.3.200 - Dan K *.
list of extended outside access permit tcp any host 12.69.103.145 eq www
list of extended outside access permit tcp any host 12.69.103.145 eq https
access outside the note list * journey to host 10.10.2.30 USIFAXBACK - Dan K *.
list of extended outside access permit tcp any host 12.69.103.146 eq www
list of extended outside access permit tcp any host 12.69.103.146 eq https
access outside the note list * incoming hosting 10.10.8.5 - Mitel 7100 BOB M 4/4-2008 - BV *.
list of extended outside access permit tcp any host 12.69.103.152 eq pptp
access list outside extended permit tcp any host 200.56.251.118 object - group HUMANLand
list of extended outside access permit tcp any host 200.56.251.121 eq 8100
outdoor access list note allow all return ICMP traffic off in order to help the attacks of hidden form
extended the list of outdoor access to deny icmp everything no matter what newspaper
list of allowed outside access extended ip 10.14.0.0 255.255.0.0 all open a debug session
list of allowed outside access extended ip 10.15.0.0 255.255.0.0 any
list of allowed outside access extended ip object-group DM_INLINE_NETWORK_7 all
outdoor access list extended permits all ip 10.14.0.0 255.255.0.0 debug log
outdoor access list extended permits all ip 10.15.0.0 255.255.0.0
list of external extended ip access permits any object-group DM_INLINE_NETWORK_6
list of access outside the scope permitted udp host 12.88.249.62 any DM_INLINE_UDP_1 object-group
Note added to pervent bocking human outside access list
list of access outside the permitted scope object-TCPUDP host 10.12.2.250 host 200.56.251.121 human group object
Note added to pervent bocking human outside access list
list of access outside the permitted scope object-TCPUDP host 200.56.251.121 host 10.12.2.250 human group object
outside the permitted scope of access tcp list any any eq log pptp
extended access list to refuse the object-group TCPUDP outdoors everything any object-group 6144
VPN-SplitTunnel extended 10.10.0.0 ip access list allow 255.255.0.0 VPN 255.255.255.192
extensive list of access VPN-SplitTunnel ip 10.11.0.0 255.255.0.0 VPN 255.255.255.192 allow
extended VPN-SplitTunnel access list ip 10.12.0.0 allow 255.255.0.0 VPN 255.255.255.192
extended VPN-SplitTunnel access list ip 10.13.0.0 allow 255.255.0.0 VPN 255.255.255.192
list of access VPN-SplitTunnel extended permitted ip VPN BGP-Transit_Network 255.255.255.0 255.255.255.192
list of access VPN-SplitTunnel extended permitted ip 10.0.0.0 255.0.0.0 192.168.10.0 255.255.255.0
VPN-SplitTunnel extended 10.10.0.0 ip access list allow 255.255.0.0 10.14.4.0 255.255.254.0
VPN-SplitTunnel extended 10.10.0.0 ip access list allow 255.255.0.0 10.15.4.0 255.255.254.0
VPN-SplitTunnel extended 10.10.0.0 ip access list allow 255.255.0.0 10.14.8.0 255.255.254.0
Note DMZ1_in access-list * OCS - 2nd interface to inside EDGE welcomes Peter K *.
DMZ1_in list extended access permit tcp host 12.69.103.3 host 10.10.2.15 DM_INLINE_TCP_2 object-group
Note DMZ1_in of access list permit all ICMP traffic
DMZ1_in access list extended icmp permitted any any newspaper
DMZ1_in deny ip extended access list all 207.152.0.0 255.255.0.0
DMZ1_in list extended access deny ip 207.152.0.0 255.255.0.0 any
Note DMZ1_in access-list * explicitly block access to all domestic networks *.
Note access-list DMZ1_in * no need allowed inside networks *.
Note DMZ1_in access-list * to do above this section *.
DMZ1_in list extended access deny ip any 10.0.0.0 255.0.0.0
DMZ1_in list extended access deny ip any 172.16.0.0 255.240.0.0
DMZ1_in list extended access deny ip any 192.168.0.0 255.255.0.0
Note DMZ1_in access-list * IP Allow - this will be the internet *.
DMZ1_in list of allowed ip extended access all any debug log
ezvpn1 list standard access allowed 10.0.0.0 255.0.0.0
access-list DMZ1-VLAN900_cryptomap extended ip allowed any one
access-list sheep extended ip 10.10.0.0 allow 255.255.0.0 VPN 255.255.255.192
IP 10.11.0.0 allow Access-list extended sheep 255.255.0.0 VPN 255.255.255.192
IP 10.12.0.0 allow Access-list extended sheep 255.255.0.0 VPN 255.255.255.192
access-list extended sheep ip 10.13.0.0 allow 255.255.0.0 VPN 255.255.255.192
access-list sheep extended ip VPN BGP-Transit_Network 255.255.255.0 allow 255.255.255.192
access-list extended sheep allowed ip 10.0.0.0 255.0.0.0 192.168.10.0 255.255.255.0
access-list sheep extended ip 10.10.0.0 allow 255.255.0.0 10.14.4.0 255.255.254.0
access-list sheep extended ip 10.10.0.0 allow 255.255.0.0 10.14.8.0 255.255.254.0
access-list extended sheep allowed ip 10.0.0.0 255.0.0.0 10.14.0.0 255.255.0.0
access-list sheep extended ip 10.10.0.0 allow 255.255.0.0 10.15.4.0 255.255.254.0
access-list extended sheep allowed ip 10.0.0.0 255.0.0.0 10.15.0.0 255.255.0.0
permit traffic to access extended list ip 10.0.0.0 255.0.0.0 10.14.0.0 inactive 255.255.0.0
outside_cryptomap to access ip 10.0.0.0 scope list allow 255.0.0.0 10.15.0.0 255.255.0.0
access extensive list ip 10.14.0.0 outside_nat0_outbound allow 255.255.0.0 VPN 255.255.255.192
access extensive list ip 10.15.0.0 outside_nat0_outbound allow 255.255.0.0 VPN 255.255.255.192
outside_nat0_outbound list extended access allowed object-group ip VPN DM_INLINE_NETWORK_8 255.255.255.192
outside_cryptomap_1 to access ip 10.0.0.0 scope list allow 255.0.0.0 DM_INLINE_NETWORK_5 object-group
pager lines 24
Enable logging
timestamp of the record
logging list VPN informational level class auth
logging list class VPN config level criticism
VPN vpn list logging level notification class
notification of log list VPN vpnc level class
VPN list logging level notifications class webvpn
logging alerts list any level
exploitation forest-size of the buffer of 256000
logging buffered all
logging VPN trap
asdm of logging of information
host of inside the 10.10.2.41 logging format emblem
logging ftp-bufferwrap
connection server ftp 10.10.2.41 \logs usi\administrator 178US1SIL3 ~.
Within 1500 MTU
Outside 1500 MTU
MTU 1500 DMZ1-VLAN900
management of MTU 1500
mask 10.10.99.1 - 10.10.99.63 255.255.255.192 IP local pool Clients_vpn
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ICMP allow any DMZ1-VLAN900
ASDM image disk0: / asdm - 611.bin
ASDM location VPN 255.255.255.192 inside
ASDM location BGP-Transit_Network 255.255.255.0 inside
ASDM location 10.10.4.60 255.255.254.255 inside
ASDM location 255.255.255.255 inside BB
ASDM location 10.16.0.0 255.255.0.0 inside
ASDM location 69.31.0.0 255.255.0.0 inside
ASDM location 198.78.0.0 255.255.0.0 inside
ASDM location 10.16.0.0 255.255.255.0 inside
enable ASDM history
ARP timeout 14400
Global (inside) 1 10.10.2.4 netmask 255.0.0.0
Global (outside) 10 12.69.103.129 netmask 255.255.255.255
Global (outside) 11 12.69.103.130 netmask 255.255.255.255
Global (outside) 12 12.69.103.131 netmask 255.255.255.255
Global (outside) 13 12.69.103.132 netmask 255.255.255.255
Global (outside) 14 12.69.103.133 netmask 255.0.0.0
NAT (inside) 0 access-list sheep
NAT (inside) 11 192.168.255.4 255.255.255.252
NAT (inside) 12 192.168.255.8 255.255.255.252
NAT (inside) 13 192.168.255.12 255.255.255.252
NAT (inside) 10 10.10.0.0 255.255.0.0
NAT (inside) 11 10.11.0.0 255.255.0.0
NAT (inside) 12 10.12.0.0 255.255.0.0
NAT (inside) 13 10.13.0.0 255.255.0.0
NAT (inside) 10 10.14.0.0 255.255.0.0
NAT (outside) 0-list of access outside_nat0_outbound
NAT (outside) 10 10.16.0.0 255.255.255.0
NAT (outside) 10 10.14.0.0 255.255.0.0
NAT (outside) 10 10.15.0.0 255.255.0.0
NAT (outside) 10 10.16.0.0 255.255.0.0
static (DMZ1-VLAN900, external) 12.69.103.0 12.69.103.0 subnet mask 255.255.255.192
public static 12.69.103.154 (Interior, exterior) 10.10.2.41 netmask 255.255.255.255
static (inside, DMZ1-VLAN900) 10.0.0.0 10.0.0.0 netmask 255.0.0.0
static (inside, DMZ1-VLAN900) 192.168.0.0 192.168.0.0 netmask 255.255.0.0
static (inside, DMZ1-VLAN900) 172.16.0.0 subnet 255.240.0.0 172.16.0.0 mask
public static 12.69.103.147 (Interior, exterior) 10.10.2.10 netmask 255.255.255.255
public static 12.69.103.152 (Interior, exterior) 10.10.8.5 netmask 255.255.255.255
public static 12.69.103.155 (Interior, exterior) 10.10.2.110 netmask 255.255.255.255
outside access-group in external interface
Access-group DMZ1_in in interface DMZ1-VLAN900
!
Router eigrp 100
Network 10.0.0.0 255.0.0.0
!
Route outside 0.0.0.0 0.0.0.0 12.69.103.225 1
Route inside 10.0.0.0 255.0.0.0 10.10.200.30 1
Route inside 10.10.98.0 255.255.255.0 10.10.200.30 1
Route outside 10.14.0.0 255.255.0.0 12.69.103.225 1
Route outside 10.15.0.0 255.255.0.0 12.69.103.225 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
AAA-server Microsoft radius Protocol
simultaneous accounting mode
reactivation mode impoverishment deadtime 30
AAA-server Microsoft host 10.10.2.1
key cisco123
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
Enable http server
http 10.10.0.0 255.255.0.0 management
http 10.10.0.0 255.255.0.0 inside
SNMP-server host within the 10.10.2.41 community UNISNMP version 2 c-port udp 161
location of Server SNMP STODATDROOM
contact SNMP SYS Admin Server
UNISNMP SNMP-server community
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Server enable SNMP traps syslog
Server SNMP traps enable ipsec works stop
Server enable SNMP traps entity config - change insert-fru fru - remove
Server SNMP enable doors remote access has exceeded the threshold of session
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 1 match address outside_cryptomap
peer set card crypto outside_map 1 115.111.107.226
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
card crypto outside_map 2 match address outside_cryptomap_1
peer set card crypto outside_map 2 116.12.211.66
card crypto outside_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
address card crypto outside_map 10 game traffic
peer set card crypto outside_map 10 212.185.51.242
outside_map crypto 10 card value transform-set ESP-3DES-SHA
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
card crypto DMZ1-VLAN900_map0 1 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto isakmp identity address
crypto ISAKMP allow inside
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life no
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
life no
Crypto isakmp nat-traversal 33
No vpn-addr-assign aaa
No dhcp vpn-addr-assign
VPN-addr-assign local reuse-delay 10
Telnet 10.10.0.0 255.255.0.0 inside
Telnet 10.10.0.0 255.255.0.0 management
Telnet timeout 29
SSH timeout 29
SSH version 2
Console timeout 1
management-access inside
dhcprelay Server 10.10.2.1 outside
a basic threat threat detection
threat scan-threat shun except ip 10.14.0.0 address detection 255.255.0.0
threat scan-threat shun except ip 10.15.0.0 address detection 255.255.0.0
threat detection statistics
Web cache WCCP
WCCP interface within web in cache redirection
NTP 192.5.41.41 Server
NTP 192.5.41.40 Server
Server NTP 192.43.244.18
TFTP server inside 10.10.2.2 \asa
attributes of Group Policy DfltGrpPolicy
banner of value WARNING: this system is for the use of only authorized customers.
value of server WINS 10.10.2.1
value of 10.10.2.1 DNS server 10.10.2.2
Protocol-tunnel-VPN IPSec svc webvpn
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value VPN-SplitTunnel
universalsilencer.com value by default-field
Server proxy Internet Explorer 00.00.00.00 value
the address value Clients_vpn pools
internal CHINAPH group policy
CHINAPH group policy attributes
Protocol-tunnel-VPN IPSec svc webvpn
Split-tunnel-policy tunnelall
enable dhcp Intercept 255.255.0.0
the address value Clients_vpn pools
internal ezGROUP1 group policy
attributes of the strategy of group ezGROUP1
VPN-tunnel-Protocol svc webvpn
allow password-storage
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list ezvpn1
allow to NEM
deleted users
IPSec-attributes tunnel-group DefaultL2LGroup
pre-shared-key germanysilence
type tunnel-group USISplitTunnelRemoteAccess remote access
attributes global-tunnel-group USISplitTunnelRemoteAccess
address pool Clients_vpn
IPSec-attributes tunnel-group USISplitTunnelRemoteAccess
pre-shared-key z2LNoioYVCTyJlX
type tunnel-group USISplitTunnelRADIUS remote access
attributes global-tunnel-group USISplitTunnelRADIUS
address pool Clients_vpn
Group-Microsoft LOCAL authentication server
IPSec-attributes tunnel-group USISplitTunnelRADIUS
pre-shared-key fLFO2p5KSS8Ic2y
type tunnel-group ezVPN1 remote access
tunnel-group ezVPN1 General-attributes
Group Policy - by default-ezGROUP1
ezVPN1 group of tunnel ipsec-attributes
pre-shared key, PSK
tunnel-group 212.185.51.242 type ipsec-l2l
IPSec-attributes tunnel-group 212.185.51.242
pre-shared key, PSK
NOCHECK Peer-id-validate
tunnel-group 115.111.107.226 type ipsec-l2l
IPSec-attributes tunnel-group 115.111.107.226
pre-shared key PSJ
tunnel-Group China type remote access
attributes global-tunnel-Group China
address pool Clients_vpn
Group Policy - by default-CHINAPH
tunnel-group 116.12.211.66 type ipsec-l2l
IPSec-attributes tunnel-group 116.12.211.66
pre-shared key, PSK
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:834976612f8f76e1b088326516362975
: end
Hello Ronald.
You use PFS on a site and not on the other.
Allows to remove from the site that has it and give it a try.
Change this:
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 12.69.103.226
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
outside_map interface card crypto outside
To do this:
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 12.69.103.226
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
outside_map interface card crypto outside
So just do a
NO card crypto outside_map 1 set pfs
Kind regards
Julio
Note all useful posts
-
daapi_config. JSON on RPi
Hi all
is there documentation on how to change daapi_config.json? I am tring to set up 25 PINS than the output pin and have a pull up, PULL-Down.
I can't find any documentation on this file (the modem management, relaxation and so on).
Kind regards
Gianmaria
Hello Gian Maria,
Unfortunately there is no document, but the rules are quite simple. Numeric values are equal to those of the specification, the property names are similar to the * class fields Config with substitution of 'device' by 'controller', for example 'controllerNumber"instead of"deviceNumber ".
/ Sergey
-
.
.
Arguments of memory in JAVA:-Xms256m-Xmx512m
.
Start mode of WLS = Production
.
CLASSPATH=F:\ORACLE\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar; F
: \ORACLE\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic
_Patch.jar; F:\ORACLE\MIDDLE~1\patch_ocp371\profiles\default\sys_manifest_classpa
th\weblogic_patch.jar; F:\ORACLE\MIDDLE~1\JROCKI~1.0-1\lib\tools.jar; F:\ORACLE\MI
DDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; F:\ORACLE\MIDDLE~1\WLSERV~1.3\serve
r\lib\weblogic.jar; F:\ORACLE\MIDDLE~1\modules\features\weblogic. Server.modules_1
0.3.6.0.jar; F:\ORACLE\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; F:\ORACLE\M
IDDLE~1\modules\ORGAPA~1.1/lib/Ant-all.jar; F:\ORACLE\MIDDLE~1\modules\NETSFA~1.0
_1/lib/Ant-contrib.jar; F:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.ja
r; F:\Oracle\Middleware\oracle_common\modules\oracle.dms_11.1.1\dms.jar; F:\Oracle
\Middleware\oracle_common\modules\oracle.jmx_11.1.1\jmxframework.jar; F:\Oracle\M
iddleware\oracle_common\modules\oracle.jmx_11.1.1\jmxspi.jar; F:\Oracle\Middlewar
e\oracle_common\modules\oracle.odl_11.1.1\ojdl.jar; F:\Oracle\Middleware\Oracle_F
RHome2\common\wlst\lib\adf-share-mbeans-wlst.jar; F:\Oracle\Middleware\Oracle_FRH
ome2\common\wlst\lib\mdswlst.jar; F:\Oracle\Middleware\Oracle_FRHome2\common\wlst
\resources\auditwlst.jar; F:\Oracle\Middleware\Oracle_FRHome2\common\wlst\resourc
es\jps - wlst.jar; F:\Oracle\Middleware\Oracle_FRHome2\common\wlst\resources\jrf-WL
St.jar; F:\Oracle\Middleware\Oracle_FRHome2\common\wlst\resources\oamap_help.jar;
F:\Oracle\Middleware\Oracle_FRHome2\common\wlst\resources\oamAuthnProvider.jar; F
: \Oracle\Middleware\Oracle_FRHome2\common\wlst\resources\ossoiap_help.jar; F:\Ora
cle\Middleware\Oracle_FRHome2\common\wlst\resources\ossoiap.jar; F:\Oracle\Middle
ware\Oracle_FRHome2\common\wlst\resources\sslconfigwlst.jar; F:\Oracle\Middleware
\Oracle_FRHome2\common\wlst\resources\wsm-WLST.jar; F:\ORACLE\MIDDLE~1\ORACLE~1\s
oa\modules\commons-CLI-1.1.jar; F:\ORACLE\MIDDLE~1\ORACLE~1\soa\modules\oracle.so
a.mgmt_11.1.1\soa-infra-Mgmt.jar; F:\ORACLE\MIDDLE~1\ORACLE~1\modules\oracle.jrf_
11.1.1\jrf.jar; F:\ORACLE\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar; F:
\ORACLE\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
.
Path = F:\ORACLE\MIDDLE~1\patch_wls1036\profiles\default\native; F:\ORACLE\MIDDLE~1
\patch_ocp371\profiles\default\native; F:\ORACLE\MIDDLE~1\WLSERV~1.3\server\nativ
e\win\32; F:\ORACLE\MIDDLE~1\WLSERV~1.3\server\bin; F:\ORACLE\MIDDLE~1\modules\ORG
APA ~ 1.1\bin; F:\ORACLE\MIDDLE~1\JROCKI~1.0-1\jre\bin; F:\ORACLE\MIDDLE~1\JROCKI~1.
0-1\bin; F:\ORACLE\MIDDLE~1\ORACLE~3\BIN; F:\ORACLE\MIDDLE~1\ORACLE~2\BIN; E:\Windo
ws\System32; E:\Windows; E:\Windows\System32\wbem; E:\Progra~1\Intel\DMIX; F:\ORACLE
\MIDDLE~1\ORACLE~2\opmn\bin; F:\ORACLE\MIDDLE~1\ORACLE~2\opmn\lib; F:\ORACLE\MIDDL
E ~ 1\ORACLE ~ 2\perl\bin; F:\ORACLE\MIDDLE~1\ORACLE~3\opmn\bin; F:\ORACLE\MIDDLE~1\OR
ACLE ~ 3\opmn\lib; F:\ORACLE\MIDDLE~1\ORACLE~3\perl\bin; F:\ORACLE\MIDDLE~1\WLSERV~1
.3\server\native\win\32\oci920_8
.
***************************************************
* To start WebLogic Server, use a username and *.
* password assigned to an administrator-level user. For *.
* server administration, using the WebLogic Server *.
* the http://hostname:port\console console *.
***************************************************
from weblogic with the Java version:
Java version "1.6.0_29".
Java (TM) SE Runtime Environment (build 1.6.0_29 - b11)
Oracle JRockit (R) (build R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-ia32,
compiled mode)
WLS starting with line:
F:\ORACLE\MIDDLE~1\JROCKI~1.0-1\bin\java - jrockit-Xms256m-Xmx512m - Dweblogic
. Name = AdminServer-Djava.security.policy=F:\ORACLE\MIDDLE~1\WLSERV~1.3\server\li
b\weblogic. Policy - Dweblogic.ProductionModeEnabled = true - da - Dplatform.home = F
: \ORACLE\MIDDLE~1\WLSERV~1.3-Dwls.home=F:\ORACLE\MIDDLE~1\WLSERV~1.3\server - Dw
eblogic.Home=F:\ORACLE\MIDDLE~1\WLSERV~1.3\server-Xms512m-Xmx1024m - Doracle.
Homepage = F:\Oracle\Middleware\Oracle_FRHome2-Ddomain.home=F:\Oracle\Middleware\user
_projects\domains\ClassicDomain-Dcommon.components.home=F:\ORACLE\MIDDLE~1\ORAC
THE ~ 1 - 11.1.1 - Dorg.apache.commons.logging.Log = org.apache.commons.lo = Djrf.version
gging.impl.Jdk14Logger-Ddomain.home=F:\ORACLE\MIDDLE~1\USER_P~1\domains\CLASSI~
1-Djrockit.optfile=F:\ORACLE\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocke
t_optfile.txt-Doracle.Server.config.dir=F:\ORACLE\MIDDLE~1\USER_P~1\domains\CLA
SSI ~ 1\config\FMWCON ~ 1\servers\AdminServer-Doracle.domain.config.dir=F:\ORACLE\M
OYEN ~ 1\USER_P ~ 1\domains\CLASSI ~ 1\config\FMWCON ~ 1 - Digf.arisidbeans.carmlloc = F:
\ORACLE\MIDDLE~1\USER_P~1\domains\CLASSI~1\config\FMWCON~1\carml-Digf.arisidst
ACK. Home = F:\ORACLE\MIDDLE~1\USER_P~1\domains\CLASSI~1\config\FMWCON~1\arisidprov
IDER-Doracle.security.jps.config=F:\ORACLE\MIDDLE~1\USER_P~1\domains\CLASSI~1\c
onfig\fmwconfig\jps-config.XML-Doracle.deployed.app.dir=F:\ORACLE\MIDDLE~1\USER
_P ~ 1\domains\CLASSI ~ 1\servers\AdminServer\tmp\_WL_user-Doracle.deployed.app.ext
= \--Dweblogic.alternateTypesDirectory=F:\ORACLE\MIDDLE~1\ORACLE~1\modules\oracl
e.ossoiap_11.1.1,F:\ORACLE\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1-
Djava.Protocol.Handler.pkgs = Oracle.MDS .net .Protocol - Dweblogic.jdbc.remoteEnabl
Ed = false-Dwc.oracle.home=F:\Oracle\Middleware\Oracle_FRHome2-Dclassic.oracle.
Homepage = F:\Oracle\Middleware\Oracle_FRHome2-Dem.oracle.home=F:\Oracle\Middleware\
oracle_common - Djava.awt.headless = true - Dweblogic.management.discover = true - Dwl
w.iterativeDev = false - Dwlw.testConsole = false - Dwlw.logErrorsToConsole = false - news
blogic.ext.dirs=F:\ORACLE\MIDDLE~1\patch_wls1036\profiles\default\sysext_manifes
t_classpath; F:\ORACLE\MIDDLE~1\patch_ocp371\profiles\default\sysext_manifest_cla
sspath weblogic. Server
[WARNING] Use of - Djrockit.optfile is obsolete and discouraged.
< 30 September 2014 20:16:47 am PKT > < Info > < security > < BEA-090905 > < CryptoJ deactivation
Check the provider PVE self-integrity for better startup performance. To enable this
check, specify - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
< 30 sep 2014 20:16:49 PKT > < Info > < security > < BEA-090906 > < change the dfau
lt Random Number Generator, in ECDRBG to FIPS186PRNG RSA CryptoJ. To turn off
This change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
< 30 September 2014 20:16:49 PKT > < Info > < WebLogicServer > < BEA-000377 > < from Web
Logical server with Oracle JRockit (R) Version R28.2.0 - 79-146777 - 1.6.0_29 - 20111005 -.
1808 windows ia32 of Oracle Corporation >
< 30 September 2014 20:16:50 PKT > < Info > < management > < BEA-141107 > < Version: WebLogi
Server 10.3.6.0 Mar 08:52:36 PST Nov 15 c 1441050 2011 >
< 30 sep 2014 20:16:52 PKT > < error > < management > < BEA-141244 > < schema validati
error when parsing F:\Oracle\Middleware\user_projects\domains\ClassicDomain
\config\config.xml - expected elements ' listen-port @ http://xmlns.Oracle.com/WebL
ECOLOGIC/field listening on port compatible @ http://xmlns.Oracle.com/WebLogic/domain cluster @
http://xmlns.Oracle.com/WebLogic/domain cluster-weight @ http://xmlns.Oracle.com/w
replication eblogic/areas group @ http://xmlns.Oracle.com/WebLogic/domain area
Ed-secondary-group @ http://xmlns.Oracle.com/WebLogic/domain consensus-process-ide
curriculum @ http://xmlns.Oracle.com/WebLogic/domain self-migration-enabled @ http://XM
web server LNS.Oracle.com/WebLogic/Domain @ http://xmlns.Oracle.com/WebLogic/domai
jdbc-save-enabled n @ http://xmlns.Oracle.com/WebLogic/domain j2ee12-only-mode-
enabled http://xmlns.Oracle.com/WebLogic/domain j2ee13-WARNING-enabled @ http://XM
LNS.Oracle.com/WebLogic/Domain iiop-enabled @ http://xmlns.Oracle.com/WebLogic/DOM
Ain user - by default-iiop @ http://xmlns.Oracle.com/WebLogic/domain by default-iiop-passw
ORD-encrypted @ http://xmlns.Oracle.com/WebLogic/domain compatible tgiop @ http://xmlns
.Oracle.com/WebLogic/Domain user - by default-tgiop @ http://xmlns.Oracle.com/WebLogic/
field by default-tgiop-password - encrypted @ http://xmlns.Oracle.com/WebLogic/domain
com-enabled @ http://xmlns.Oracle.com/WebLogic/domain compatible jrmp @ http://xmlns.or
acle.com/weblogic/domain com @ http://xmlns.Oracle.com/WebLogic/domain Server-debu
g@ http://xmlns.Oracle.com/WebLogic/domain httpd-activated @ http://xmlns.Oracle.com/
WebLogic/field system-password encrypted @ http://xmlns.Oracle.com/WebLogic/domai
n entry console compatible @ http://xmlns.Oracle.com/WebLogic/domain listening-wire-st
art-delay-dry @ http://xmlns.Oracle.com/WebLogic/domain Listeners-bind-Early@http
: listen-address //xmlns.oracle.com/weblogic/domain @ http://xmlns.Oracle.com/weblo
GIC/external-dns-domain name @ http://xmlns.Oracle.com/WebLogic/domain interface-a
lists @ http://xmlns.Oracle.com/WebLogic/domain network-point access @ http://xmlns
.Oracle.com/WebLogic/Domain accept-rear @ http://xmlns.Oracle.com/WebLogic/Doma
max-interruption-between - failures @ http://xmlns.Oracle.com/WebLogic/domain login-ti
meout-millis @ http://xmlns.Oracle.com/WebLogic/domain administration-port-enabled
@ http://xmlns.Oracle.com/WebLogic/domain administration-port @ http://xmlns.Oracle
.com/WebLogic/Domain jndi-portable-object-factory @ http://xmlns.Oracle.com/w
eblogic/domain iiop connection pool @ http://xmlns.Oracle.com/WebLogic/domain xml
-Register @ http://xmlns.Oracle.com/WebLogic/domain XML-entity-cache @ http://xmlns .
Oracle.com/WebLogic/Domain - java compiler @ http://xmlns.Oracle.com/WebLogic/domain
java-compiler-pre-class-path @ http://xmlns.Oracle.com/WebLogic/domain java-compilation
rel-post-class-path @ http://xmlns.Oracle.com/WebLogic/domain extra-RMIC-options@h
ejbc-extra-options ttp://xmlns.Oracle.com/WebLogic/Domain @ http://xmlns.Oracle.co
m/weblogic/domain verbose-ejb-deployment-enabled @ http://xmlns.Oracle.com/weblogi
c/domain transaction - log file prefix @ http://xmlns.Oracle.com/WebLogic/domain tra
nsaction-log-file-writing-policy @ http://xmlns.Oracle.com/WebLogic/domain network-c
Lass-loading-enabled @ http://xmlns.Oracle.com/WebLogic/domain tunneling-Enabled@h
tunnel-client-ping-dry ttp://xmlns.Oracle.com/WebLogic/Domain @ http://xmlns.o
tunnel-client-timeout-dry racle.com/WebLogic/Domain @ http://xmlns.Oracle.com/
WebLogic/domain admin-renew-interval-seconds @ http://xmlns.Oracle.com/weblogi
c/jms - by default-connection-factory-enabled domain @ http://xmlns.Oracle.com/weblog
IC/domain server-start @ http://xmlns.Oracle.com/WebLogic/domain listening-delay-dry
@ http://xmlns.Oracle.com/WebLogic/domain JTA migratable target @ http://xmlns.ORAC
le.com/WebLogic/Domain bass-memory-time-interval @ http://xmlns.Oracle.com/WebLogic
/Domain low-memory - sample size @ http://xmlns.Oracle.com/WebLogic/domain bass-memor
granularity level y @ http://xmlns.Oracle.com/WebLogic/domain bass-memory-gc-beat
old@ http://xmlns.Oracle.com/WebLogic/domain setting in scene-directory-name @ http://xmlns .
Oracle.com/WebLogic/Domain upload-directory-name @ http://xmlns.Oracle.com/weblogi
setting in scene-mode c/field @ http://xmlns.Oracle.com/WebLogic/domain auto-restart@http:
auto-kill-if-failed //xmlns.Oracle.com/WebLogic/Domain @ http://xmlns.Oracle.com/w
eblogic/domain reboot-interval-seconds @ http://xmlns.Oracle.com/WebLogic/domain
restart max @ http://xmlns.Oracle.com/WebLogic/domain health-check-interval-second
s@ http://xmlns.Oracle.com/WebLogic/domain health-check-timeout-seconds @ http://XM
LNS.Oracle.com/WebLogic/Domain health-check-start-delay-seconds @ http://xmlns.ora
cle.com/WebLogic/Domain restart-delay seconds @ http://xmlns.Oracle.com/WebLogic/d
omain classpath-servlet-people with disabilities @ http://xmlns.Oracle.com/WebLogic/domain default
-internal-servlets-disabled http://xmlns.Oracle.com/WebLogic/domain Server-versi
on@ http://xmlns.Oracle.com/WebLogic/domain Startup mode @ http://xmlns.Oracle.com/
WebLogic/domain server-life-cycle-timeout-val @ http://xmlns.Oracle.com/WebLogic/d
omain startup timeout @ http://xmlns.Oracle.com/WebLogic/domain graceful-stop-
timeout @ http://xmlns.Oracle.com/WebLogic/domain ignore the sessions-during-stop @
http://xmlns.Oracle.com/WebLogic/domain Managed-Server-Independence-Enabled@http
: //xmlns.oracle.com/weblogic/domain msi-file-replication-enabled @ http://xmlns.or
Acle.com/WebLogic/Domain client-cert-proxy-enabled @ http://xmlns.Oracle.com/weblo
GIC/domain weblogic-plugin compatible @ http://xmlns.Oracle.com/WebLogic/domain hosts
-migratable-services @ http://xmlns.Oracle.com/WebLogic/domain http-trace-support-
enabled http://xmlns.Oracle.com/WebLogic/domain key-shops @ http://xmlns.Oracle.c
OM/weblogic/field custom-identity-key-store-file-name@ http://xmlns.Oracle.com/w
eblogic/area custom-identity-key-store-type @ http://xmlns.Oracle.com/WebLogic/d
custom-identity-key-store-pass-phrase-encrypted@ omain http://xmlns.Oracle.com/we
blogic/field custom-trust-key-store-file-name@ http://xmlns.Oracle.com/WebLogic/
custom-confidence-key-store-type field @ http://xmlns.Oracle.com/WebLogic/domain Custo
m-Trust-Key-Store-Pass-phrase-Encrypted@ http://xmlns.Oracle.com/WebLogic/domain
Java-standard-Trust-Key-Store-Pass-phrase-Encrypted@ http://xmlns.Oracle.com/WebL
ECOLOGIC/reliable-delivery-policy area @ http://xmlns.Oracle.com/WebLogic/domain my
Sage-id-prefix-enabled @ http://xmlns.Oracle.com/WebLogic/domain by default-file-stor
e@ http://xmlns.Oracle.com/WebLogic/domain candidate-machine @ http://xmlns.Oracle .
com/weblogic/field-overload protection @ http://xmlns.Oracle.com/WebLogic/domain
jdbcllr-table-name @ http://xmlns.Oracle.com/WebLogic/domain use-fusion-for-LLR@HT
TP://xmlns.Oracle.com/WebLogic/Domain jdbcllr-table-xid-column-size @ http://xmlns
.Oracle.com/WebLogic/Domain jdbcllr-table-pool-column-size @ http://xmlns.Oracle.c
OM/weblogic/field jdbcllr-table-record-column-size @ http://xmlns.Oracle.com/WebL
ECOLOGIC/jdbc-opening session-timeout-seconds field @ http://xmlns.Oracle.com/WebLogic/domain s
Server-diagnosis-config @ http://xmlns.Oracle.com/WebLogic/domain auto-jdbc-connec
tion / closing @ http://xmlns.Oracle.com/WebLogic/domain support the Protocol @ http://XML
ns.Oracle.com/WebLogic/Domain Federation-services @ http://xmlns.Oracle.com/weblog
IC/single-sign-on-domain services @ http://xmlns.Oracle.com/WebLogic/domain Web is
m @ http://xmlns.Oracle.com/WebLogic/domain nm-Socket-Create-Timeout-in-Millis
@ http://xmlns.Oracle.com/WebLogic/domain coherence-cluster-system-resource@http:
//xmlns.Oracle.com/WebLogic/Domain virtual-machine-name @ http://xmlns.Oracle.com/
WebLogic/domain replication ports @ http://xmlns.Oracle.com/WebLogic/domain Transa
ction-journal-jdbc-store @ http://xmlns.Oracle.com/WebLogic/domain data source @ http://
xmlns.oracle.com/weblogic/domain' instead of ' ssl @ http://xmlns.Oracle.com/weblog
ic/domain ' server element here @ http://xmlns.Oracle.com/WebLogic/domain >
< 30 September 2014 20:16:52 PKT > < critical > < WebLogicServer > < BEA-000362 > < Server f
hurt. Reason: [management: 141245] in F:\Oracle\Middlewar schema Validation error
e\user_projects\domains\ClassicDomain\config\config.XML see the log for more details. CHS
EMA validation can be disabled by starting the server with the command line opti
on:-Dweblogic.configuration.schemaValidationEnabled = false >
< 30 sep 2014 20:16:52 PKT > < opinion > < WebLogicServer > < BEA-000365 > < Server sta
you changed down >
< 30 sep 2014 20:16:52 PKT > < error > < WebLogicServer > < BEA-000383 > < a criticism
service failed. The server will shut down >
< 30 sep 2014 20:16:52 PKT > < opinion > < WebLogicServer > < BEA-000365 > < Server sta
you changed to FORCE_SHUTTING_DOWN >
F:\Oracle\Middleware\user_projects\domains\ClassicDomain >
It seems accidentally tag ssl has been added to the config.xml file. You can try:
1 back changes
OR
2 restore backups of form of config.xml
OR
3. manually, locate the tag added ssl, remove it and restest if the problem disappeared.
Best regards
Luz
-
Problems with configuration properties and the java plugin
Hello
I have test the java plugin from the hyperic documents. Autodiscover works very well. Now, I had the problem if I want to change all "configuration properties" I get following error message:
' The configuration has not been set for this resource due to: invalid configuration: error reported by Agent @ 141.73.130.146:2144: java.lang.NullPointerException.
Wait I use properties by default, then I don't get any errors.
What is the problem?
MyAutoDiscoveryServerDetector.java
---------------------------------------------------------------------------------------------------------------------------
SerializableAttribute public class MyAutoDiscoveryServerDetector extends ServerDetector implements
{AutoServerDetector}
public list getServerResources (ConfigResponse platformConfig)
get {PluginException}
Server list = new ArrayList();
Server ServerResource = createServerResource ("My Auto-Discovery Server->" + (x + 1));
ConfigResponse productConfig = new ConfigResponse();
productConfig.setValue ("myTimeout", String.valueOf ((x+1) * 1000));
productConfig.setValue ("myUrl", "http://127.0.0." + (x + 1));
productConfig.setValue ('Description', 'Description - my Auto Discovery Description->' + (x + 1));
productConfig.setValue ("myValue", 10);
server.setProductConfig (productConfig);
Servers.Add (Server);
return of the servers;
}
---------------------------------------------------------------------------------------------------------------------------
HQ - plugin.xml
---------------------------------------------------------------------------------------------------------------------------
<? XML version = "1.0"? >
< package = "com.citytechinc.articles.hyperic.plugin plugin" >
< name of the filter = "domain" value = "My Auto Discovery" / >
< name of the server = "MyAutoDiscoverServer" version = "0.1 c" platforms = "Unix, Win32" >
< plugin type = "autoinventory" class = "MyAutoDiscoveryServerDetector" / >
< plugin type = 'measure' class = "MyAutoDiscoveryServerMeasurementPlugin" / >
< config >
< name of option = 'myUrl '.
Description = "Enter the URL for this resource"
" default = ' http://127.0.0.1 "/>
< name of option = "Description".
Description = "enter a description of this plugin"
default = "default my Auto Discovery Description" / >
< name of option = "myTimeout."
Description = "time-out for something in my plug-in.
default = "0" / >
< name of option = "myValue"
Description = "a metric value.
default = "10" / >
< / config >
< name metric = "availability".
alias = 'availability '.
Template = "System.avail:type = Platform:Availability"
category = "AVAILABILITY".
indicator = 'true '.
collectionType = "dynamic".
units = "percentage" / >
< name metric = 'value '.
alias = 'value '.
model = "" MyPlugin:Type = value: value ' "
category = 'USE '.
indicator = 'true '.
collectionType = "dynamic".
units = "none" / >
< / Server >
< / plugin >
---------------------------------------------------------------------------------------------------------------------------UM,.
This must be due to an incompatibility between the definitions of plugin in the server (and/or of the database) and the agent.
First of all, always check the server log, errors that appear it should lead to the cause.
The plugin xml initialized ok on the server, or any error appear?
You go to Administration-> default trace and see your plugin (Server Type: MyAutoDiscoverServer) and everything is there?
If this isn't the case, errors occurred when starting the server, check the log.Did you start to shave - created the plugin, added to both server and agent, autodiscovery, the platform/server added in Hyperic - or you already had the server/platform added in Hyperic and who has made some changes in the xml plugin that may be in conflict with what is already in the Hyperic database?
Generally the pitfalls that come from these errors.
Been there, done that.
-
Hello
I took several days, setting up connection between jboss and tuxedo by jca, but I only have TPENOENT.
Here's my configuration files
RA. XML
+ <? XML version = "1.0" encoding = "UTF-8"? > +.
+ < xmlns = "http://java.sun.com/xml/ns/j2ee" + connector
xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance".
xsi: schemaLocation = "http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/connector_1_5.xsd".
version = "1.5" >
+ JCA Tuxedo adapter < display name > < / name >.
+ Oracle < vendor name > - < / vendor name > +.
+ Tuxedo < eis-type > < / eis-type > +.
+ resourceadapter < version > 11gR 1 (11.1.1.2.1) < / resourceadapter-version > +.
+ < license > +.
+ license < description > Tuxedo salt < / description >.
+ license-required > < false < / license-required > +.
+ < / license > +.
+ < resourceadapter > +.
+ > class resourceadapter < com.oracle.tuxedo.adapter.TuxedoResourceAdapter < / resourceadapter class > +.
+ < config-property > +.
+ traceLevel < config-property-name > < / config-property-name > +.
+ java.lang.String < config-property-type > < / config-property-type > +.
+ < config-property-value > 80000 < / config-property-value > +.
+ < / config-property > +.
+ < config-property > +.
+ < config-property-name > xaAffinity < / config-property-name > +.
+ java.lang.String < config-property-type > < / config-property-type > +.
+ < config-property-value > true < / config-property-value > +.
+ < / config-property > +.
+ < config-property > +.
+ dmconfig < config-property-name > < / config-property-name > +.
+ java.lang.String < config-property-type > < / config-property-type > +.
+ < config-property-value > /export/home/jboss/jboss/standalone/configuration/dmconfig.xml < / config-property-value > +.
+ < / config-property > +.
+ < outgoing resourceadapter - > +.
+ connection < definition > +.
+ class < managedconnectionfactory > com.oracle.tuxedo.adapter.spi.TuxedoManagedConnectionFactory < / managedconnectionfactory-class > +.
+ > connectionfactory interface < javax.resource.cci.ConnectionFactory < / connectionfactory interface > +.
+ com.oracle.tuxedo.adapter.cci.TuxedoConnectionFactory < connectionfactory-impl-class > < / connectionfactory-impl-class > +.
+ connection < interface > javax.resource.cci.Connection < / interfaces > +.
+ connection < impl-class > com.oracle.tuxedo.adapter.cci.TuxedoJCAConnection < / connection-impl-class > +.
+ < / connection-definition > +.
+ < transaction-support > LocalTransaction < / transaction-support > +.
+ < authentication mechanism - > +.
+ BasicPassword <-authentication mechanism-type > < / type of authentication mechanism > +.
+ > interface credential < javax.resource.spi.security.PasswordCredential < / credential-interface > +.
+ < / authentication mechanism > +.
+ fake > helps reauthentication < < / re-authentication-support > +.
+ < / outgoing-resourceadapter > +.
+ < / resourceadapter > +.
+ < / connector > +.
Dmconfig. XML
+ <? XML version = "1.0" encoding = "UTF-8"? > < TuxedoConnector > +.
+ < name LocalAccessPoint = "JDOM" > +.
+ < AccessPointId > JDOM1 < / AccessPointId > +.
+ < NetworkAddress > //maqueta2:5001 < / NetworkAddress > +.
+ < / LocalAccessPoint > +.
+ < name RemoteAccessPoint = "TDOM" > +.
+ < AccessPointId > TDOM1 < / AccessPointId > +.
+ < NetworkAddress > //maqueta2:5000 < / NetworkAddress > +.
+ < / RemoteAccessPoint > +.
+ < SessionProfile name = "profile_1" > +.
+ < security > NO < / security > +.
+ < period > 30000 < / period > +.
+ < interoperate > false < / interfonctionnent > +.
+ < ConnectionPolicy > ON_STARTUP < / ConnectionPolicy > +.
+ local < ACLPolicy > < / ACLPolicy > +.
+ local < CredentialPolicy > < / CredentialPolicy > +.
+ < > 60 RetryInterval < / RetryInterval > +.
+ < MaxRetries > 1000 < / MaxRetries > +.
+ < CompressionLimit > 1000000 < / CompressionLimit > +.
+ < KeepAlive > 100000 < / KeepAlive > +.
+ < KeepAliveWait > 200000 < / KeepAliveWait > +.
+ < / SessionProfile > +.
+ < name of session = "session_1" > +.
+ JDOM < LocalAccessPointName > < / LocalAccessPointName > +.
+ TDOM < RemoteAccessPointName > < / RemoteAccessPointName > +.
+ < Nom_de_profil > profile_1 < / ProfileName > +.
+ < / session > +.
+ < / TuxedoConnector > +.
standalone. XML
....
+ < subsystem xmlns = "urn: jboss:domain:resource - adapters: 1.1" > +.
+ < resource adapters > +.
+ < adapter resources - > +.
+ < archive > +.
com.oracle.tuxedo.TuxedoAdapter.rar
+ < / archive > +.
+ < transaction-support > LocalTransaction < / transaction-support > +.
+ < connection-definitions > +.
+ < class-name = "com.oracle.tuxedo.adapter.spi.TuxedoManagedConnectionFactory" - name = jndi connection-definition "" java: / ist/TuxedoConnectionFactory "enabled ="true"use-java-context = 'false' pool-name =" java: jboss/ist/TuxedoConnectionFactory "/ > +"
+ < / connection-definitions > +.
+ < / adapter resources > +.
+ < / resource adapters > +.
+ < / subsystem > +.
...
Dmconfig
* DM_RESOURCES +.
+#+
VERSION = U22
+#+
* DM_LOCAL_DOMAINS +.
+#+
TDOM GWGRP = GRUPO3
TYPE = TDOMAIN
NETWORKID = "TDOM1."
PERIOD = 60
DMTLOGDEV = "/ appl/sf/tux/logs/DMTLOG.
DMTLOGNAME = DMTLOG
SECURITY = NONE
+#+
* DM_REMOTE_DOMAINS +.
+#+
TYPE = TDOMAIN JDOM
NETWORKID = "JDOM1."
+#+
* DM_TDOMAIN +.
+#+
TDOM NWADDR = "//maqueta2:5000".
JDOM NWADDR = "//maqueta2:5001".
* DM_LOCAL_SERVICES +.
TOUPPER
It's the connection in ULOG:
174335.maqueta2! GWTDOMAIN.26860.4.0: LIBGWT_CAT:1128: INFO: accepted connection of the field (networkid = < JDOM1 >)
and the jboss:
17:59:57, 618 INFO [org.jboss.as.connector.deployers.RaXmlDeployer] (service MSC 1-32 thread) IJ020002: deployed: file:/export/home/jboss/jboss-eap-6.1/standalone/tmp/vfs/tempd94ea707efb676cf/com.oracle.tuxedo.TuxedoAdapter.rar-f7058dab3d57d6b6/contents/
17:59:57, 626 INFO [org.jboss.as.connector.deployment] (the MSC 1-55 service thread) JBAS010401: JCA ConnectionFactory enlazado [java: / ist/TuxedoConnectionFactory]
17:59:57, 758 INFO [org.jboss.as.server] (HttpManagementService-NET - 1) JBAS018559: Implementado "com.oracle.tuxedo.TuxedoAdapter.rar" (name-DURATION: 'com.oracle.tuxedo.TuxedoAdapter.rar')
17:59:58, 144 INFO [stdout] (by default-NET - 2) < kills Jun 04 17:59:58 CEST 2013 > < Debug > < WTC > < BEA-180072 > < +++ / tplle/crypFinishOne/send_key (16) +++ >
17:59:58, 147 INFO [stdout] (by default-NET - 2) < kills Jun 04 17:59:58 CEST 2013 > < Debug > < WTC > < BEA-180113 > < 0 C F3 E2 49 51 93 2F A5 92 48 07 1 7F F4 92 A3... IQ? ?? H...??. >
17:59:58, 149 INFO [stdout] (by default-NET - 2) < kills Jun 04 17:59:58 CEST 2013 > < Debug > < WTC > < BEA-180073 > < +++ END +++ >
17:59:58, 151 INFO [stdout] (by default-NET - 2) < kills Jun 04 17:59:58 CEST 2013 > < Debug > < WTC > < BEA-180072 > < +++ / tplle/crypFinishOne/recv_key (16) +++ >
17:59:58, 153 INFO [stdout] (by default-NET - 2) < kills Jun 04 17:59:58 CEST 2013 > < Debug > < WTC > < BEA-180113 > < A5 DA EF 93 BE 79 E7 80 51 37 47 F5 77 C1 C0 AF? ?? y.? Q7G.w.. ? >
17:59:58, 154 INFO [stdout] (by default-NET - 2) < kills Jun 04 17:59:58 CEST 2013 > < Debug > < WTC > < BEA-180073 > < +++ END +++ >
17:59:58, 178 INFO [com.oracle.tuxedo.utils.TuxedoLogger] (by default-NET - 2) makes the connection to the remote domain TDOM1.
But when I prove the service, the only thing I get is TPENOENT
18:01:11, 888 ERROR [stderr] (http-/0.0.0.0:8080-1) TPENOENT (6): 0:0:TPED_MINVAL (0): QMNONE (0): 0:There no resources imported with name TOUPPER is configured!
I don't know what else to do!
Thanks in advanceI solved the problem with the TPENOENT.
All the configuration was ok, the problem came from libraries outside smoking. I put them in the package of the ear and not as global libraries in jboss (in the form of plug-ins).
For some reason any if you don't resolve the dependencies of your servlet, ejb... of these libraries, you are out of the context of smoking.
-
vCenter trial? Edit: doh found nvm.
IM studying for my VCP and many laboratories in the books requires vCenter server to do. Why is there no trial period for vCenter? How correctly configure vmotion or test of DRS or HA do not have access to the required tools. This does not make sense to me. IM problems with dvSwitches and have no way to put one in place, I took the class install config manage but that's more than a month and only read/memory will not adequately prepare for the test.
Edit: OK so there is a path, it's just not where I expect. Under products and vCenter Server there is no mentioned of a trail. However, under vSphear, he mentions that the trial license includes standard vCenter and heart rate.
This test is emotional me .
The trial of vSphere includes vCenter Server...
60 days of all the virtualization, you can manage...
-
Javafx 2.0 deployment request to the server web and accsess by URL
Hi all
I built a JavaFx 2.0 using Netbeans 7.1 application. He created an html file, a jar jnlp file a file with the name of the project. Now, I want to deploy my application on a server for example glassfish or tomcat so that any user can access the URL.
Is it possible to deploy the application on the server. If so, how?
I found a link
http://docs.Oracle.com/JavaFX/2.0/deployment/deploy_overview.htm
Here he described various mode of executions. In a run mode it say that we can launch the application from a remote server using Web Start. But I'm not able to get the steps how to achieve this.
Thank you
VikasYou deploy a client application via a network, you cannot be sure that the computer that is running the client application will have the configuration property file in the location you are trying to access (unless your application he wrote). Even if the file is there that you must sign your application deployed to have access to it, which is usually an unnecessary hassle.
As an aside, use the code format specifiers (see thread sticky at the top of the forums) to apply inlining code in forum posts because it makes the code more readable.
-----
For that to work, you must package configuration properties inside your pot with the rest of your resources, then you can load it via:pro.load(LoginPage.class.getResourceAsStream("config/config.properties");
OR, if you can't bundle configuration properties in the pot, for example because you want to vary the configuration regardless of deployment of a new pot, you can host on your Web server configuration to a relative location where host you your application and get it from here:
HostServices hosting = getHostServices(); pro.load(new URL(hosting.resolveURI(hosting.getDocumentBase(), "config/config.properties")).openStream());
For example, if the application jar is located in the ROOT/webapps of tomcat directory, and you want to access config/config.properties using HostServices, then place config.properties in the webapps/ROOT/config/config.properties
Now, if you have specific user rather that wide application configuration, you will need to implement a web service for storing specific user configuration and to read and write from that or you need read and write the configuration of the user on the local drive by using the jnlp FileService for unsigned application , or any where on the disk if you have a signed application.
However, it seems that your configuration is to store only a hostname, the port and service network app path. If you can make the path to the app for your network service in relation to where you deploy your application and save the relative path as a constant in your application, you could get only the information of:
HostServices hosting = getHostServices(); URL serviceURL = new URL(hosting.resolveURI(hosting.getDocumentBase(), APP_PATH)); ServiceCommunicator.HOSTNAME = serviceURL.getHost(); ServiceCommunicator.PORT = serviceURL.getPort(); ServiceCommunicator.SERVER_APP_PATH = serviceURL.getPath();
In this way, you wouldn't have to define, maintain and load a separate config.properties file.
In addition, with the path of the service against your deployment application facilitates application host elsewhere and denies the need to sign the application for network services to work when the application is deployed in embedded mode webstart or browser.Published by: jsmith on January 20, 2012 01:11
I thought that you could load a properties with just a url string, but it must in fact be a stream, so I've updated the call to load the properties in order to take a course of water.
Has changedpro.load(hosting.resolveURI(hosting.getDocumentBase(), "config/config.properties");
TO
pro.load(new URL(hosting.resolveURI(hosting.getDocumentBase(), "config/config.properties")).openStream());
-
(1) I want to change the default extensions.ietab.filterlist to mywebsite url value without having to follow several steps, each time that the user is going to hit my site, then to the users of the browser extensions.ietab.filterlist value must be added when it will hit my site. Topic: config, we can add manually, but I don't want to manually add, is it possible to automate this process.
(2) is it possible to install the activex (extension Ietab) without clicking on add to firefox, I ask because my site is not supported in firefox because of the activex.(3) how to add admin privileges for activex in firefox.
. Please help meI found the solution to this problem,
(1) I added the User.js file in the default mozilla profile folder IE
C:\Users\xpointers\AppData\Roaming\Mozilla\Firefox\Profiles\xb2fxdxi.default, I've added in user.js
user_pref ("extensions.ietab2.filterlist", ' / ^ file:\\/\\/\\/.*\\. ") (mht) | ("mhtml) $/ http://*update.microsoft.com/* http://www.windowsupdate.com/ * http://www.UrWebsiteUrl.com/ * ");You can add n number of URLs to run in IETAb or IEtab2.
User.js file overwrites the prefs.js file.(2) allowing to automatically add extensions to add addon, using the code and need to change the extensions.json file to the new version of firefox, for the old version of firefox need to change in the sqlite database.
-
Class Config XML support.
Hello
I have a system that takes care of your tank of properties a class that reads an xml file. For example sysconfig.xml years that contains all the properties of the system. Now I need to load the properties xml to another class, for example a class that read files from another application, and I need to store the password, login, path, etc...
What is the best approach for creating a generic class that receives a string that represents the xml and load?
Is too ugly receives a string with the name of xml to load?
Thanks for the suggestions...If the method does not know the name of the file that is supposed to load, then passing the file name as a parameter seems to be a perfectly ordinary thing to do. What was really your question?
-
How to get the name of a class private data controls?
How can I get the names of the controls within a class private data?
I use the framework of the actor and try to create a tha method will be executed when run the actor. This method should an o list all names of control inside the data class to find the initial value within a configuration file (config.ini file), the key to the configuration file will be the name of the control.
Thank you.
You already do the substitution method just because you write for the bundle by name. And then how are you going to respond to all types of data might be the key. You do more difficult things that it takes to really very few benefits.
-
Ethernet/IP: ControlLogix bad reports class with Demo.vi
Demo downloaded from...
http://forums.NI.com/NI/board/message?board.ID=nilabs&message.ID=279#M279
Which is pretty much exactly what I had tried on my cRIO (got the 'Type of Segment invalid' on the cRIO). So I've punted and ran the demo on my PC.
Thus configured ControlLogix 1756-L55 (Firmware V16.03) by the demo...
Yet as you can see Clx class bad reports. The demo affects indeed Instances of Assembly 100 and 101 via constants. There is nothing to configure. What Miss me?
More information:
1756 - ENBT is Rev 4.3.2 @ 192.168.1.2
cRIO: 192.168.1.1
PC:192.168.1.199
Industrial communications FOR EtherNet/IP: V1.2.0 (MAX shows it installed on target cRIO)
For future stabs in the dark...
PC-wise:
For some reason any. Remove the generic Ethernet Module, add to Controllogix project and re - download got to work.
cRIO wise:
My original config had a real (SGL), a FORCE (I32), and a (U8) SINT grouped in a cluster and then flattened in a 9 byte array. It was produced for ControlLogix on instance 100. A symmetrical body 101 has been consumed. When executed on the cRIO - the ControlLogix has pointed out an electronic inlay - incompatible error code produced. Not really useful (thank you Rockwell).
So I disabled popup everywhere wherever I could - with no improvement.
On a whim, I remove the SINT (U8) of the cluster, this changed the array of bytes length 8 bytes. I adjusted the constants of size in BT and deployed. I adjusted the side ControlLogix accordingly and downloaded. He started to work without problem?
Go figure. Someone at OR can look at this because I can't imagine a reason why you need to limit a config to the sending of an even number of bytes.
Maybe you are looking for
-
Cannot update my Firefox and some of the programs say I have
You TUbe is saying that I'll be able t0 access it if I do update my firefox and when I'll update the page and click on date, nothing happens. I did this several times in the last two days, but I do not get a dialog box or anything either and whenever
-
Setting IP error incompatible. SMU-8135
Hello NOR Forum, I recently got a new laptop. I want it to work with the NI SMU-1078 chassis with controller Embeded PXIe-8135. I'm having a problem to connect to it. There is an error in Measurement & Automation Explorer > remote systems > NOR-PXIe8
-
Pavilion internet lost HP while being connected to the software upgrade usb3 and motherboard
My desktop HPE H8 computer - 1280t lost Internet using USB3 and vice versa. If I disconnect the external drives connected to the USB3 ports then I have Internet back. If I connect external drives to USB3 ports, then I won't have Internet. What is t
-
While trying to do a build on LV 2009 SP1, I get this error: The build failed. An error occurred during the recording of the following file: Sample.VI Details: Visit ni.com/ask support request page to learn more about the resolution of this problem.
-
Is it possible to use the internal clock for meter tasks in the buffer?
Hello Hardware: USB term mass 6251 Software: LabView 2011 SP1 I need to measure the angular lever position and speed of a carpet. For that I use two quadrature encoders. To accurately calculate the speed I use buffered from the measures of position u