3.1 client for Linux thin clients

Similar Questions

• Problem with USB Redirection on Horizon View Client v2.3.0 for Linux

  I had a problem on the USB Redirection when connecting to the Server of VMware View by Horizon View Client v2.3.0.

  1. Here is our configuration:
     1. Server:
        1. Horizon View Server 5.5 + Windows 7 Enterprise VDI
     2. Client:
        1. Thin client (TI ARM platform - 8148)
        2. Horizon View Client v2. 3 for Linux
        3. USB Flash: Kingston 8 GB USB 2.0, FAT32
  2. The issue: USB flash can not redirect to VDI successfully.
  3. Some status on our test:
  • The USB is plugged USB port on workstation before connecting to Horizon view Server 5.5
  • Light client can recognize and use USB flash to the local site.
  • When we connect to VDI, we can see the USB driver is responsible for research and installation, but windows VDI() reports fail to install the USB driver finally. It seems that VDI trying to acknowledge the failure of USB flash but finally.
  • It is held even Let's restart the workstation and VDI.
  • Attached file is the log of the Horizon of the VMware View Client.

  
  All welcomed to this topic?

  Unfortunately the newspapers show much... (note: they do not contain client-side logs)

  one thing I thought well... since he is a computer thinClient - we have seen the questions that manufacturers computer thinClient some of their own 'management' software install on the client. He often tries to do things with usb devices (maybe try to share them between a receiver client citrix application and view client app or maybe just there is a citrix receiver application installed too). In our experience, we've seen these apps interfere between them as they try to hang the bottom of usb devices down into the kernel.

  as such, could you try stop any 3rd party services - either citrix or your provider of thin client and then try again.

  If the problem persists, can you be sure to also collect these log files from the computer thinclient:

  Windows client

  • %ProgramData%\VMware\VDM\logs\debug-*.txt
    AND
  • C:\Windows\Temp\vmware-SYSTEM\vmware-usbarb-*.log

  Linux client

  • default /tmp/vmware-root/VMware-view-Usbd-*.log
    AND
  • / Library/Logs/VMware/vmware-usbarbitrator -.log

  for reference, the Agent-side usb connects:

  • %ProgramData%\VMware\VDM\logs\debug-*.txt

  see you soon

  peterB

• View Client for Linux, stay connected after disconnect

  I have a large lot of IGEL Linux thin clients, and I have them updated to the latest version which includes the latest version of Linux client to view.

  The default behavior of the application is not to go out when a connection to a virtual machine descends from the intentional log out of the virtual machine.  This is crazy, because the Windows version of the leave application automatically demand the closing of the session of the view.

  This means that when my users log out of their VM because they are trained, the thin client is left to a State after the entry password and before the selection of the pool.  The next person to use the workstation would have access to their account.

  It makes no sense at all.  How to change to exit the application?  Until I change it, my Linux thin clients are useless.

  Hello

  According to Aaron, it works as expected.

  BUT, we did a way to change the behavior of the Client.

  Please consult this document:

  https://www.VMware.com/PDF/view-client-Linux-document.PDF

  On page 22, you will find the explanation of the parameter "-once."

  Specifies that you don't want to see Client to retry the connection in the case of an error occurring.
  Use - once if you want to get a workflow similar to the view client 4.6. This option will force the client to view to exit once the user disconnects or logs off of a desktop computer.
  You generally must specify this option if you are using the kiosk mode and use the exit code to handle the error. Otherwise, you might find it difficult to kill the vmware-view process remotely.
  If you set the configuration key, specify "TRUE" or "FALSE". Default value is "FALSE".

  You can use it like this (tested on an Ubuntu machine):

  -Open a terminal and run 'vmware-view - once'

  or

  -Change the file in the home folder of the user, called: .vmware/view-preferences

  -Add the line: view.once = 'TRUE '.

  For the client to hedgehogs, or all other types/brands/models, I don't know if you can access and apply the changes, so I recommend contacting technical support of these devices.

  Hope this helps,

  Kind regards

  Jonathan

• If you use firefox for linux, I'm unable to open the game client for a called flash browser game darkorbit.

  I'm using Linux Mint 17.2 xfce.
  The Firefox I use is 42.0 Mozilla Firefox for Linux Mint Mint - 1.0.
  Shockwave Flash is 11.2r202.
  The browser Flash game is DarkOrbit ( www.darkorbit.com ).
  The game was working fine until about 2 months ago.

  I log in the game (as before) and get on the last page without any problem.
  When I click on 'Start' to go to the game client, the screen is black. The browser tab written game client will blink twice.
  Please note that everything works fine when I use the chrome Web browser.
  DarkOrbit works very well with Firefox on Windows.

  Is there a way to use the pepper Flash used in Chrome/chrome using the freshplayerplugin wrapper.

  Your Linux distro may have related packages for it.

  Alternatively, you can use Chrome or chrome for that one site and use Firefox for everything else.

• Client AnyConnect vpn for linux

  Hello

  I try to use the anyconnect for linux client vpn.

  My connection is through a proxy with NTLM authentication.

  Is it possible to do this?

  I have found no information on.

  Thanks in advance

  Silk,

  Not-so-good news:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsg77160

  Unfortuately the business unit has never sees fit to include this feature.

  But you can conntact consider you the team to discuss the issue.

  Marcin

• 11 GR 2 64-bit download snapshot Client for Linux?

  Hello

  I try to find it for an instance of Oracle 11 g 2 64-bit Client for Linux by downloading.

  I checked the following URL, but it only contains the full client:

  Oracle Database 11 g Release 2 for Linux x 86-64

  I need customer moment because I believe that it is in the form of RPM and the 'root' user can install it without having to install/configure the X-Windows stuff. I need this for a 64 bit RH Linux 5.8 server where MISTLETOE is not allowed.

  Please notify.

  Best regards

  I try to find it for an instance of Oracle 11 g 2 64-bit Client for Linux by downloading.

  A simple search for '11 GR 2 oracle instant client' all pages download found easily as the first four results:

  https://www.google.com/search?q=oracle+11gr2+instant+client&sourceid=ie7&rls=com.microsoft: en - us: IE-SearchBox & oe and ie ==.

  http://www.Oracle.com/technetwork/topics/Linuxx86-64soft-092277.html

• Overview of VMware VIew Client for Linux

  Hey everybody

  Is there a table of software compatibility for VMware View Client and Linux Horizon? We would like to use the client on devices based on linux, but we do not know what linux operating systems are currently supported.

  Dou you have a formal link or are you aware of the compatibility?

  Best regards

  Documentation (https://www.vmware.com/pdf/horizon-view/horizon-client-linux-document.pdf):

  Operating systems: Horizon customer 3.2 supports the following operating systems.

  Operating system	Version
  Ubuntu Linux	12.04 or 14.04
  Red Hat Enterprise Linux (RHEL)	6.5
  SUSE Linux Enterprise Desktop (SLED)	11 SP3
  CentOS	6.5

  IMPORTANT only 32-bit systems are supported.

  * Horizon customer 3.1: 32-bit Ubuntu Linux 12.04 or 14.04

  * Display Client 2.x: Linux 32 bit Ubuntu 12.04

  * View Client 1.6 and 1.7: 32-bit Ubuntu Linux 10.04 or 12.04

  * Display Client 1.5: 32-bit Ubuntu Linux 10.04 or 10.10

  VMware customer Horizon for Linux Release Notes

• Trying to get Essbase Client 11.1.2.3 for Linux 32 bit, need help please

  Hello

  I'm running a 64-bit RedHat Enterprise Linux 6.4 system and have an application that requires that the Client of Essbase 32-bit libraries to connect to a server instance Essbase 11.1.2 11.1.2.X.

  Go by reading the messages of the forum for the past couple days, I came to understand that Oracle Essbase 11.1.2 no longer ships a client Linux as a separate assembly, you must therefore install the complete Essbase server and then extract the files of the client out of that use.  So I'll try to get the correct bundle of downloaded files to the same get the installer to launch correctly so I can choose a minimum installation, including the components of the client, but I can't get correct zip files, I almost, but there is always some missing, and the instructions I found seem to refer to 11.1.1.X versions which have changed a bit in the 11.1.2.X version.

  Can someone please help me understand what still me get installation running and how to extract the client libraries?

  So far I have downloaded:

  2073792430 22 April 11:43 Apps-11123 - linux32.zip

  2440713397 22 Apr 11:46 ClientInstallers - 11123.zip

  554953827 apr 22 11:47 Essbase-11123 - linux32.zip

  171726540 20 June 09:08 FinancialManagementAnalytics-11123 - linux32.zip

  1053291166 22 Apr 11:52 Foundation-11123-linux32 - Part1.zip

  1603812256 22 Apr 11:53 Foundation-11123-linux32 - Part2.zip

  939688909 22 Apr 11:53 Foundation-11123-linux32 - Part4.zip

  1597577101 22 Apr 11:55 Foundation-11123 - Part3.zip

  1801831469 22 Apr 12:01 OSH-11123 - linux32.zip

  366584941 22 Apr 12:04 RA-11123 - linux32.zip

  BUT I still have the following missing assemblies, that I can't take into account:

  EPMINS-01001: one or more checks of preinstallation failed. Correct the errors before continuing with the installation.

  See assemblies: / home/ntruhan/Downloads/essbase/assemblies/biplus_product_reporting_client... Not exist

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  Failed! EPMINS-01084: Assembly for linux32 platform is used

  Failed! EPMINS-01084: Assembly for linux32 platform is used

  Failed! EPMINS-01084: Assembly for linux32 platform is used

  / Home/ntruhan/downloads/Essbase/Assemblies/hfm_services... Not exist

  / Home/ntruhan/downloads/Essbase/Assemblies/dbclient64... Not exist

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  / Home/ntruhan/downloads/Essbase/Assemblies/hsf_server... Not exist

  / Home/ntruhan/downloads/Essbase/Assemblies/dbclient32... Not exist

  / Home/ntruhan/downloads/Essbase/Assemblies/FDM... Not exist

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  / Home/ntruhan/downloads/Essbase/Assemblies/bpm_architect_services... Not exist

  / Home/ntruhan/downloads/Essbase/Assemblies/hsf_webapp... Not exist

  I'll go through the list of entries, but the only references I've seen so far have been for Windows downloads and it's linux and then Assembly linux32 messages there, but I need since I need right 32-bit client libraries?

  Can someone shed light on this adventure in the installation of this since all of the installation instructions I could see are for an older version conditioned differently?

  Thank you in advance,

  Nathan

  The best place to download files of EPM is compared to the clouds of software Oracle delivery - https://edelivery.oracle.com

  The files that you need will be sub - "Oracle Enterprise Performance Management System (11.1.2.3.0) Media Pack for Linux x 86.

  The files required for Essbase are:

  The system of EMP 11.1.2.3.0 for Linux x 86 Part 1 version

  The system of EMP 11.1.2.3.0 for Linux x 86 Part 2 version

  EPM System Release 11.1.2.3.0 part 3

  The system of EMP 11.1.2.3.0 for Linux x 86 part 6 version

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• VMware infrastructure client for linux software

  It is:

  When I install ESXi and connect through the client to the IP hosts, I can get VMware Infr'action. client software (.exe)

  It's all very well, if the client is windows, but it is available for Linux client?

  Currently, there is no linux Client VI - available

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Where can I find VI Client for Linux?

  And also Windows as well.  I started tinkering with Server 2 some time ago, but I gave up due to a myriad of problems.  Back to the tests more but I forgot where the customers. Guess I should mention in my Linux Server installation.  I know that it is buried in the somewhere installation directory.

  Currently, there is no VIClient for Linux.  See the thread for one in the forum request for product or service.  News from VMworld2008, the next VI platform is supposed to have a.

  For Windows - you can download it from your VMware Server.  Alternatively, simply search the directory where you installed the server.

• VMware discover 5 support for linux/ubuntu comments?

  Dear Sirs

  Is there an agent yet for linux especially Ubuntu 10.04 LTS.  With the Android development picking up speed, we have a real need to have our developers.  The main thing that is necessary for us is the USB redirection to the prompt of the client running XP/Windows 7 or even a thin client for them to download cores to our material connected to the customer.  Thanks in advance, if anyone knows of other solutions, it would be really appreciated.

  Are you talking about Office VDI or on the side of client to end-users.

  There is a VMware View Client for Linux, this will allow Linux machines to connect to a broker and load a Windows VDI image.

  However it is not a VMware View Agent for Linux that allow a remote desktop Linux to be negotiated through the infrastructure of the view to a device from end user customers.

  There are rumors of people for the agent Windows runs under Linux using wine and Rdesktop but no one seems to have posted a shot-by-shot full of way to account and then that would be completely supported the point of view of VMware.

• SMcli for Linux - MD3600f

  Hi all

  I hope someone is able to help, I'm after a SMcli for linux to be able to watch one of our new PowerVault MD3600f boxes.

  I managed to find a version on the net but it doesn't work, the error message is less, I checked the Dell drivers and it does not list anything for my product, any ideas?

  Storage management software (version 10.75.G6.12) you are trying to use is not compatible with the firmware on the RAID in Storage Array MD3600f controller modules.

  If you have recently updated your firmware of RAID controller module, you must make sure that his compatible storage management software has also been installed on all clients connected to this storage group.

  If the correct version is not available, please provide your Customer Support with the following information representative.

  To the RAID Controller Module firmware version: 07.84.44.60
  Appware for the RAID Controller Module version: 07.84.44.60
  Required unit API version: devmgr.v1084api04.Manager

  SMcli failed.

• Is there really a customer Cisco VPN for Linux? _Really? _

  Hello people,

  I finally after almost a brain aneurysm trying to think too hard I have my Cisco 881 - SEC - K9 router configured properly for a multi-point my Amazon Virtual Private Cloud IPSec VPN tunnel, so that the obstacle is finally spent, and I think that it has been a very important step in my life somehow. I never thought I'd see the day, I actually got my hands on a legitimate Cisco non - stink... uh... I mean, non-linksys router. Now I can't find a "client" VPN for Linux program. I am running a Xen Hypervisor environment on openSUSE Linux because it is the only Linux distribution that fills all my laborious requirements in a Linux server environment. It is also the most mature and sure Linux on this planet, making it the most significant Linux distribution for my research needs.  Using NetworkManager is not really an option for a Linux based server environment and OpenVPN is just too complicated to understand for my little tiny head.  I've heard of some mysterious "easy VPN", but after that hours of digging online there is no information on this subject, even the Cisco download link leads to a Page not found error.  I see a Linux VPN API for the AnyConnect program, but is it a real VPN client, or just an API?  It seems to want my money to download it, but I have no money nor I really know what it is because it's all closed, the secret-like source and I can not even find a simple README file on him explaining what it is exactly.  I'm just a developer of off-work software attempts to connect to my home for personal use router and I can not really afford to more than $ 1 million for a single program I will only need to download once in my life that should have been included with the router in the first place of the fork. I have that more volunteer will probably not yet able to understand how to use the program when even because I don't know anything about VPN connections, that's why I bought this router so I can try to figure it all out as part of the open source nonprofit, research, I am currently conducting.  Is there some sort of period of evaluation or trial for personal use? Which would be really good if I could at least know if I will be able to understand or not.  I hate throwing money when it is in such a shortage these days. Is there really no alternative to a Cisco router.  It is an absolute necessity for the things I'm trying to accomplish, so try to settle for something else and past with my life isn't really an option. No, it's something that I just need to raise its head on and finish.

  I may be a little too crazy in me for my own good, but I don't see why it should take so much money just to learn to do something for personal use, it is not really a skill that I would never use otherwise.  Wouldn't be great if Cisco did their VPN client open-source and free for the public to use and modify, improve, learn and to grow and bring the whole world together in a community? Even the source code to the discontinuous old Cisco VPN client could be used as a tool for learning valuable for some poor student hungry or developer of Open Source software somewhere trying to cope with Sauce and Ramen noodles noodles Ramen on toast (don't tell me you've never thought about it).  With the ripple effect, it would significantly improve sales over time, because it would open the door to a whole new market where could those who previously could not afford to participate now. That's the real power of Open Source. It creates a more skilled workforce for the future by contributing openly and share knowledge. What happens if the next big internet technology and the solution to the global tyranny - the solution to end all wars forever - locked in the mind of a software developer to unemployment, which could not afford to upgrade their software to router from cisco or access the software they need because he was source closed and required engage in a costly to download service contract?  It would be just terrible, wouldn't it?  I guess there is no way to ever know for sure. I guess I'd be as happy if a kind soul out there could tell me an alternative easy to use for one always on the VPN connection that is running in the background that does not require NetworkManager or having to spend days days searching in and trying to figure out some really poor or extremely complex documents?  I apologize for all the sentences run on posed as a question, but just a few serious mental exhaustion of this, being unemployed is a few people from hard work. I really could use a vacation.  Maybe a camping on the coast trip is in order after I get this job, that sounds nice, isn't it? Nothing like a summer storm on the beach to the ocean--away from technology - to refresh the mind.

  I won't step in all the discussions in there, but you might want to look into is vpnc and openconnect.

  The two opensource projects that seem to work with devices Cisco, for a long time, I've been a user of vpnc.

  http://www.infradead.org/openconnect/

  http://www.UNIX-AG.uni-kl.de/~Massar/vpnc/

  Looks like some of your questions, concerns should be directed to your Cisco rep.

  There is an AC for Linux client (component the GUI and CLI). If you have problems finding - get it from 'package' (for linux) file, which is essentially a zip.

• 6u2 ESXi host nested on VMware Workstation for Linux referee v12

  Hello all, I have

  I have a lab environment virtual running in VMware Workstation for Linux v12, and my ESXi hosts do not work correctly on one of the virtual networks. All my troubleshooting suggests a problem with nested ESXi hosts that may be a bug, but I want to assure you that I did everything properly first. That's why I post here with the hope that if I made a mistake that maybe someone else can point out he me.

  Physical system

  8 core Intel Xeon 2.1 GHz CPU

  128 GB of RAM

  OS - kernel Linux 64 - bit w/3.19.0-32-generic Linux Mint 17.3 (fully updated from this announcement)

  VMware Workstation 12 Pro - 12.1.1. Build-3770994 (fully updated from this announcement)

  Nested ESXi host VM

  ESXi v6.0.0 (Build 3825889, completely updated from this announcement)

  4 cards 'physical' (only 3 used for now)

  -all use the e1000 NIC hardware virtual, but also tried vmxnet3 NIC with no difference

  -vSwitch0 use vmnic0 & 1 vmnet16 of virtual network in a pair of active / standby

  -vSwitch1 uses vmnic2 on network virtual vmnet18

  -vmk0 used for management on vSwitch0 and vmk1 for iSCSI on vSwitch1

  -"Promiscuous" mode and forged passes enabled on all Port vSwitch groups (activating or turning off these features makes no difference)

  Test performed until now

  I checked that all the IP addresses and network masks used are correct.

  With the help of vmkping I ping other nodes on the network vmnet16 with success.

  With the help of vmkping I tried to ping the other nodes in the network vmnet18, but that has failed.

  I have depolyed other non - ESXi VMs on the vmnet18 network, and they are able to ping each other, but are unable to ping or ping by the ESXI host.

  I tried various material virtual NIC as mentioned before, but without changes in the results.

  I tried to use only local network instead of the vmnet18 guest network segments with no change in results.

  When I find out the status of the network adapters on the ESXi host through vCenter or host incorporated client vmnic0 & 1 time display network information, but vmnic2 shows no networks. Yet, I know that there is a network with different VM communicate on it. Moreover, I was able to get all of this work on a Windows system running 10 Workstation (this is the laptop that my employer gives me with).

  Having built nested ESXi labs on different platforms as well as physical environments in the past, I'm very confused as to why I can't get this special configuration to work. At this point my gut tells me that this is probably a bug any with the nested themselves ESXi hosts. Since I can get all this work on vmnet16 including the management of ESXi hosts and the VCSA that I use, I am sure that my vSwitch configuration is correct (other than the IP address space and vmnic configurations is bascially the same). Because I can get other virtual machines to communicate over the network vmnet18 I don't see how can be a VMware Workstation for the issue physical Linux host. Is there something obvious I'm missing here? I read on the ESXi hosts nested under VMware Workstation after having known problems and bugs with networking. If anyone else has experienced this?

  Thanks for any help others can provide!

  Kind regards

  Patrick

  Well, the problem is now resolved. The problem was what covelli was trying to explain, but I couldn't because the physical host network adapters being mentioned.

  The problem on the Linux host, but it was a problem of permissions with the virtual Ethernet adapters. The following article has the fix:
  With the help of Ethernet virtual cards in Promiscuous Mode on a Linux host (287) | VMware KB

  Even if I launched the workstation under the root user I have yet met this problem and which still makes no sense to me, but change the permissions solve the problem. I was not getting an error message on my Linux Mint and Ubuntu system, but when I tried on a second box of Linux Mint that I just got the error has been generated, and the error message was the above link it contains.

  So, here's what I learned:

  (1) the question has nothing to with a VMware Workstation definition that you can configure.

  (2) the question has nothing to do with a physical network card.
  (3) the question has nothing to do with any vmnic on the nested ESXi host.

  (4) apparently virtual Ethernet adapters are not the correct permissions when created.

  All you have to do to fix this is:

  (1) open a terminal.

  (2) run the command ' sudo chmod a + rw/dev/vmnet * "(don't forget to run this each time that you create a new virtual network).

  You can also create a group, as shown in the link above and simply give this group the correct permissions. Personally, I think it's easier to just give everyone the rw permission.

  I appreciate the help that others have offered. I did not understand what was asked for in previous answers because of the terms that have been used.

• Patch # for the last startCD (12.1.1.13) for Linux 64-bit platform?

  Hello

  I try to install EBS 12.1.1 Oracle Linux 5.8 64 bit. When I started the "rapidwizard" I got following error:

  [root@prod rapidwiz] #. / rapidwiz

  
  Installation Wizard fast is to validate your file system...
  4 dvd found labels
  Quick Installation Wizard will now launch the Java Interface...

  [root@prod rapidwiz] # error: no 'customer' JVM to "/ mnt/hgfs/software_2/R12_64bit/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/lib/i386/client/libjvm.so".

  [root@prod rapidwiz] #.

  I checked and the file exists at this location. The I did some internet research and found this thread:

  https://community.Oracle.com/thread/2351367?TSTART=0

  It is said that I should install the most recent startCD/RapidWiz. I wonder if Patch # 11072566) is the same for 32-bit and 64 - bit? If not, what is the patch # for Linux 64-bit platform?

  I read he said 'Generic platform' - this means that it can be installed on any platform and 32-bit and 64-bit?

  Please advise!

  Best regards

  It is the same for 32-bit and 64-bit. 12.1.x release is a 32-bit application - and can be installed on the operating system 32-bit or 64-bit OS

  HTH
  Srini