High CPU load on Oracle when executing select on TT

Similar Questions

• Satellite P300-212 - system causes the periodic high CPU load

  Windows Vista Edition Home Premium (OEM) on the Toshiba Satellite P300-212

  Even on a system Windows freshly installed (from recovery DVDs), the system process (PID 4, NT Kernel & System) causes on a regular basis (every five minutes) a CPU load high for a few seconds, during which the system hangs, not even the mouse pointer can be moved.
  Sysinternals Process Explorer identifies the thread of high load as "ntkrnlpa.exe! ExfTryAcquirePushLockShared + 0 x 15 2 "with the thread ID 20 or 24.

  Does anyone have an explanation for this behavior or a solution to the problem?

  Hey,.

  If you have installed Windows recovery disk Toshiba but still high CPU usage? Hmm that's strange because this image is tested by Toshiba

  Have you installed or uninstalled any software or tools?
  I uninstall the current antivirus and disable some start up programs you n t need in msconfig. Usually, this should work.

• [MSD] High CPU load of Java

  Hello

  One of my colleagues has a problem with the CPU load high caused by the process of java under the wrapper, it uses the latest version of TMS 13.2.2 with TMSPE, the server running Server 2008 R2 Enterprise, 4 GB RAM, 64-bit java (9) was last updated was applied, to no avail.

  The process of java on my TMS system runs at 0.54% avg, the only difference I see is the amount of RAM, its user base is tiny (80 users).

  Any suggestions on what he can try to diagnose the problem?

  

  Hi you use findme?

  You can check if the address of the video template is the same as the address of device model?

  In the diagnostics of tmspe can also see if the importation of the aircraft has a work «»
  Circle on it as his performs a constant import?

  If you do not use findme, disable it on tms tmspe settings and restart the tmspe service. The cpu is now stable?

  / Magnus

  Sent by Cisco Support technique iPhone App

• Network - high CPU load problem

  Hello

  I've updated the 2.6.24 kernel 2.6.26 (under Debian Lenny 64 bit) on the host computer. And I have a problem with the network communication.

  I have 2 Virtual PC (Windows) on the host Linux (Debian 64 bit). Each virtual PC to fill only one network adapter.

  I have VMware Server 2 for 64-bit, my PC has Intel Quad Core and ethernet card 4 on the card mother Gigabyte EP45-DQ6.

  When virtual PC start communicate via network - load cpu in virtual card pc go to 40-50 percent, after the stop communicates on the NIC - cpu load to go from 1 to 4%.

  CPU host increase load when virtual pc communicate too.

  My linux use r8169 for ehernet adapter.

  What is the problem?

  Thank you for your response.

  Soory for my English.

  Reduce the numer vCPU one per guest. If you have a multiprocessor/kernel HAL, you will need to change this, but give it a try without changing that, first of all.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• 100% high CPU load and memory usage

  Hi all

  My company bought a new appliance IPS 4510 and after initial installation, I see that the CPU load and memory is 100%. The device is not in a production network. Is this normal or there is a hardware problem? Enjoy a Counselor about it.

  Concerning

  Christine

  Hi Damien,.

  It is actually normal behavior for an IPS sensor.

  To measure the actual load of an IPS sensor, you will want to monitor the "percentage load treatment" of the analytical engine that processes all inspection processing for the sensor.

  You can view these statistics by using the command 'display the scan statistics-engine '.

  Also, the sensor running version 7.0000 E4 5,0000 E4 (or later version), you can check the load percentage value Inspection displayed by the command "Display inspection-load" in its place.

  Hope that answers your query.

  Cyril Shankar

• what the step to follow oracle when run select, delete, update...

  Hi expeerts,

  I want to know analysis thorough database oracle for performance - tuning. when we execute these queries as shown below in oracle. what oracle stage to execution. Please tell me step by step. my new in oracle, I try to understand what happens when we run these command. I have read a lot of blog and book but the thing very confuse me. Please help me solve these...  

  
  

  Select (with where, order by, and group by clause) = >?

  Delete (with where clause) = >?

  Update (with where clause) = >?

  Truncate and drop = >?

  Reg,

  Hard

  The SELECT, DELETE, and UPDATE all the

  (a) read buffers of memory if it is already present in the memory

  or

  (b) retrieves the disk blocks in the buffers

  The DELETE and UPDATE statement must then update the buffer in memory.  The buffer can be written on the disc of "lazy" way by the DBWR process - that is to say the actual writing on the disk is postponed to later in time.  The changes caused by DELETING and UPDATING are captured in food stamps by progress and what is written on the disc as soon as or before a COMMIT is issued.

  The TRUNCATE causes a control point of the segment (ensure that all Sales belong to the table buffers are written to disk) before the scopes are released and updated by the high tide.

  Hemant K Collette

• 3.1EA1 - High CPU on Mac even when idle

  There are various threads autour on CPU, but I couldn't find one specifically for 3.1EA1 with processor high when the program is idle.
  
  Right now I am running:
  
  SQL * Developer: 3.1EA1
  Appearance: MacOS X
  Operating systems: MacOS X - Snow Leopard (10.6.8)
  
  I have 5 connections to different v11.2 databases Oracle, that don't perform queries... but the processor uses 50% (25% on each of the two nuclei) and 500 MB of RAM.
  
  TEST SCENARIO
  -----------------
  If I restart SQL * quiet developer then the CPU at almost zero and 325 MB of RAM
  Even after the reconnection of the sessions the CPU remains very low, and memory increases up to 360MB
  If I run a simple query (select * from global_name ;) in each of the 5 sessions, then the CPU jumps to a constant 11-12% and 423 MB of RAM.)
  
  I hope that this simple test scenario will help you reproduce the problem, but if not, then please let me know what you need more information.

  Hello
  You have the NFL Oracle located on Mac we recommend that you use the Oracle on Mac appearance, which does not exhibit this problem.
  You can test and let us know?

  Thank you
  Barry

• High CPU load of FSX

  I have a FSX Acceleration. Whenever I run the FSX, the CPU always hit at least 60% (sometimes even at full load) on all 4 cores (I changed to use the 4 hearts somewhere in the config). For this reason, my CPU temp is around 70-95°C during my GPU temp is not 55°C. My question is, is there a way to reduce the CPU usage to 50% or less for the entire game? Is it possible to move the CPU to the GPU still load?

  Spec:

  Processor - Intel Core i5-2500 running at default clock

  RAM - 8 GB

  Hard Drive-WD Blue 500 GB

  GPU - NVIDIA GeForce GTX 550Ti by Gigabyte

  Motherboard - GA-P75-D3

  Hi Frank,.

  Check if the operations since the next thread is useful.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/Microsoft-Flight-Simulator-x-CPU-overusage-error/56106f93-5742-4005-b3ea-cb21d2b91efb

  CHKDSK warning:

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• BT stack file TosBTMng.Exe generates 100% of CPU load

  I am also facing the problem that the Toshiba Bluetooth Manager (TosBtMng.exe) very often starts a loop and causes a 100% CPU load.

  This has happened with older versions of the Toshiba Bluetooth stack and the current version (5.1.0.12).

  The affected system is a Tecra S1, BT-Modul and Windows XP SP2.

  BT battery installation went well and the laptop starts succesfull while BT is enabled. I also checked for hidden COM-Ports and other tips in this forum, without success.

  Blocking seems to occur at different times. Sometimes just after are restarted, by clicking on the tray icon of BT with the right button of the mouse. Then the context menu is shown all too the white box, no entries. He can also try to connect to a device already associated. If I kill the process with the Task Manager, I can restart and he continues to work for a while.

  As found in another thread here, I enabled the registration of the API of the Bluetooth Manager and found the following when connecting with the Nokia PC Suite for my mobile phone:

  Call the 00042519 21:55:05 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042520 21:55:05 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  00042521 21:55:05 [7208] [TosBtAPI (PCCSTBTP)] BtCreateCOMM2: InitCOMPort = COM6, CreateCOMPort = COM23
  00042522 21:55:05 [7208] [TosBtAPI (PCCSTBTP)] BlockingSDPCall: send COPYDATASTRUCT / FuncNumber = 00008000 (32768), Size = 00000036 (54)
  00042523 21:55:05 [7208] [TosBtAPI (PCCSTBTP)] receive WM_COPYDATA / fCloseAPI (BOOL) = 0
  00042524 21:55:05 [7208] [TosBtAPI (PCCSTBTP)] SetReturnBackData: receipt COPYDATASTRUCT / FuncNumber = 00008000 (32768), Size = 00000028 (40)
  00042525 21:55:05 [7208] [TosBtAPI (PCCSTBTP)] call BlockingSDPCall() is returned.
  00042526 21:56:14 [7208] [TosBtAPI (PCCSTBTP)] call BtGetLocalInfo()
  00042527 21:56:14 [7208] [TosBtAPI (PCCSTBTP)] BtGetLocalInfo2: entry Paramers / pLocalBtDeviceInfo = 00D9FE8C, plStatus = 00D9FE84
  00042528 21:56:14 [7208] [TosBtAPI (PCCSTBTP)] BlockingSDPCall: send COPYDATASTRUCT / FuncNumber = 00001000 (4096), Size = 00000030 (48)
  00042529 21:56:14 [7208] [TosBtAPI (PCCSTBTP)] receive WM_COPYDATA / fCloseAPI (BOOL) = 0
  00042530 21:56:14 [7208] [TosBtAPI (PCCSTBTP)] SetReturnBackData: receipt COPYDATASTRUCT / FuncNumber = 00001000 (4096), Size = 0000003F (63)
  00042531 21:56:14 [7208] [TosBtAPI (PCCSTBTP)] call BlockingSDPCall() is returned.
  00042532 21:56:17 [7208] [TosBtAPI (PCCSTBTP)] call BtGetRemoteDeviceList2()

  A new COM port is created successfully (COM23) and a few seconds later the CPU of TosBtMng load goes up to 100%, but no API calls are made. And if you wait long enough the phone are connected and data can be transferred. However, very slowly.

  Probably because of the high CPU load a next port COM (COM24) will be created some time later and this process is then repeated once again:

  00042740 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] receive WM_COPYDATA / fCloseAPI (BOOL) = 0
  00042741 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] SetReturnBackData: receipt COPYDATASTRUCT / FuncNumber = 00008007 (32775), Size = 00000041 (65)
  00042742 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] call BlockingSDPCall() is returned.
  Call the 00042743 21:56:47 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042744 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  00042745 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] BtCreateCOMM2: InitCOMPort = COM6, CreateCOMPort = COM24
  00042746 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] BlockingSDPCall: send COPYDATASTRUCT / FuncNumber = 00008000 (32768), Size = 00000036 (54)
  00042747 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] receive WM_COPYDATA / fCloseAPI (BOOL) = 0
  00042748 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] SetReturnBackData: receipt COPYDATASTRUCT / FuncNumber = 00008000 (32768), Size = 00000028 (40)
  00042749 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] call BlockingSDPCall() is returned.
  00042750 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtGetCOMMInfoList2()
  Call the 00042751 21:57:52 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042752 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  Call the 00042753 21:57:52 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042754 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  Call the 00042755 21:57:52 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042756 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  Call the 00042757 21:57:52 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042758 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  Call the 00042759 21:57:52 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042760 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  00042761 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtGetLocalInfo()
  00042762 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtGetLocalInfo()

  Maybe this allows to locate the origin of the problem CPU load of the Bluetooth Manager.

  Thank you
  Gerhard

  How your com port configuration look like?
  Please compare with the DeviceManager screenshot from the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ/bluetoothnotworking

• VI causes CPU load after several days of running

  Hello

  I have a strange problem. I have craeted a control test VI bench and it runs on five computers, five test of control systems. All PCs have almost the same hardware, same card mother, same processor, etc.

  Normally the CPU load is around 50% when I run the VI, but to a PC, CPU load goes up to 85% after several days (maybe a week) market continues and the PC is almost tied up - VI execution becomes very slow (10 times slower) and the mouse moves only very slowly.

  I have first thought that the PC has a problem, but the problem disappears as soon as I stop and restart the VI!

  I don't even have to put an end to LabVIEW - only my VI and then all is well again.

  The problem does not occur in the other four PC, but I can't say for sure.

  The Task Manager indicates that LabVIEW causes CPU - use swap file load is small.

  Is it possible to analyse the causes of high CPU load?

  I use LabVIEW 7.1 Professional

  Operating system: Win XP (SP 2 or 3 that I can't remember)

  P.S. I have no loops without waiting-functions.

  johanneshoer wrote:

  ...

  the PC where the problem is occurring only 2 x 512 GB RAM, others have 2 x 1 GB. Maybe I have the upgrade of RAM would be my first action...

  ...

  Assuming that it's a typo problem, is you have run out of memory physics and are returning to the virtual (which is 1000 X) slower than real memory.

  Christian has nailed.

  Ben

• DAQmx read results 2 ms/s in high CPU usage

  I have an application that reads the 32 channels of 2 ms/s analog input signals, at the same time. The actual hardware will be: SMU-8135 Win7, chassis SMU-1071, 2 x SMU-6368 (16 channels). The SMU-two 6368 will provide 32 channels data acquisition.

  I don't have the material at the moment, but I've been estimate the processor on the alternative configurations needs, because I have concerns about the use of the CPU to data acquisition high speed. Two alternative configurations are:

  (1) SMU-8133 (quad core) WinXP, SMU-1062 q, PXI-6133.

  (2) PXI-8106 (dual-core) WinXP, PXI-6133, PXI-1042.

  Note: PXI-6133 supports high speed HAVE 2 ms/s, at the same time.

  I wrote a simple continuous data acquisition software to allow me to compare the CPU usage. The sample rate and the number of channels are configurable. What I found is:

  (1) at low sampling frequency, for example 100 kech. / s, the CPU usage is minimal on both configurations (bicoeur or image), regardless of the number of channels is 1 or 8. The reading of the CPU was about 1-4%

  (2) at high sampling frequency, for example 2 ms/s, what is the number of channels used, either 1 or 8, the CPU utilization was 50% for dual core and 25% for the quad core, IE. a full core has been fully utilized.

  (3) the passage of the low use of the processor (<5%) to="" high="" cpu="" usage="" (="">45%) increases when the sampling rate is rather steep and shows interesting channel-dependence (note the following has been achieved with a PXI-8106 controller, dual-core).

  • @1 channel, it happened between 950 to 970 k
  • @2 channels, it happened between 470 to 480 k
  • @4 channels, it happened between 230 to 240 k,.
  • @8 channels, it happened between 120 to 130 k.

  This model reminds me of buffer length related question but I double checked a sufficient length of the buffer was used. He suggested also, surprising a few traffic jams occurred when the amount of data increases up to certain level.

  My question is, is this a problem with this particular card (PXI-6133) or driver DAQmx (9.5.5f4). How the problem is when I'm doing an acquisition of 32 channels?

  For your information, I have attached the benchmarking software.

  Thank you!

  Donghui Yin

  I followed this example code (see link below) and used based on events DAQmx, now the excessive CPU utilization problem has been resolved. Playback from the CPU is now less than 10 percent, while it could be 50% (in the case of dual-core) or 25% (case of hearts) at the same sample rate and number of channels.

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/5911

• High CPU on the client computer, generating application running on oracle forms 11 GR 2

  Hi guys,.

  Our environment:

  Server:

  OS: windows 2008r2

  software: form of Oracle 11 GR 2

  client machine : jre1.8.0_45

  Client has 100% cpu on the computer of the user when you run the application.

  application has a menu customized with custom icons.

  When I run procexp on the client machine I see high CPU by
  
  

  -----------------------------------------------------------------------------------------------------------------------------------------

  "C:\Program Files (x86)\Java\jre1.8.0_45\bin\jp2launcher.exe '-fix jre - plugin -" C:\Program Files (x86)\Java\jre1.8.0_45 ' - LURfX2p2bV9sYXVuY2hlZD03OTQ1NjY3MDQ0MgAtRF9fYXBwbGV0X2xhdW5jaGVkPTc5NDU2NTYxODIyAC1Ec3VuLmF3dC53YXJtdXA9dHJ1ZQAtRGphdmEuc2VjdXJpdHkubWFuYWdlcgA = vma - my cmVhZF9waXBlX25hbWU9anBpMl9waWQ4NTY0X3BpcGUzLHdyaXRlX3BpcGVfbmFtZT1qcGkyX3BpZDg1NjRfcGlwZTQA ").

  ---------------------------------------------------------------------------------------------------------------------------------------------------

  Help, please

  Thank you, Mary

  What format is your custom icons? Maybe take a single JPG and have a testcase?

  (I just thought that I hope you are not animated GIF, that could be a problem)

• Implementation error when executing load interface to Essbase data.

  When executing an interface to Essbase data loading I get this error:
  rg.apache.bsf.BSFException: exception of Jython:
  Traceback (most recent call changed):
  File "< string >", line 26, < module >
  at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData (unknown Source)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  
  at java.lang.reflect.Method.invoke(Method.java:597)
  
  
  com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: invalid column type specified for the column of data [ActivityPurpose]
  
  The data store is reversed using the RKM Hyperion Essbase, I did not any changes in the data store.
  I'm loading from an identical to the tabel of target array.
  I use the IKM SQL for Hyperion Essbase (DATA).
  
  Does anyone have any idea what this might be?
  
  Concerning
  Hans-Petter

  Might be useful to have a read of the following doc Oracle Support - "how to avoid signs of ' ODIEssbaseException: invalid column type specified for the data column" Message When loading Essbase models ODI? ". [ID 885608.1] »

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Since the Firefox 10 update, when I select web pages in my fall down, they don't load automatically more

  I used to be able to navigate to Web sites simply by selecting from the drop-down list below the address, but since the upgrade to Firefox 10 when I select my desired menu URL drop down it does not load automatically more; Now, I have to select and then click the 'go '. How to get back to the way it was?

  Try to disable AVG Safe Search of tools > Modules (or waiting to see if they ship an update). It happened with similar extensions.

• Apple music I can't search for artist or songs he will list them but when I select one the screen turns white without loading occurs as usual

  in music search function Apple does not list the possible options to select the artist, songs ect. When I select an artist turns off the screen instead of saying loading

  I had this problem on my iPhone 6 Plus, iOS 9.2.1 but I was able to fix it by resetting 'All settings', and then restart the phone. The search for 'Any Apple music' works perfectly now.