32 bit dxdiag not fully active on windows 7 64 bit

Similar Questions

• Wireless can not be activated; SL510 Windows 7

  I have a big problem with my Thinkpad SL510 Windows 7.

  Everything I try, I'm not able to activate the wireless card. When I diagnose the network connection, it says somethink like "the device is not active or not installed. However, the device is correctly listed as 'Intel WiFi Link 100 BGN' in Device Manager. All windows updates are installed, and the Lenovo Update Manager displays only an update optional (Intel Chipset driver for Windows 7) that gives an error when you try to install it.

  A strange thing is that when I use the command "ping 127.0.0.1" in the shell, only 1-2 out of the 4 tent give a result, others show a time-out error.

  More, the device works properly with a disk of Linux Live, the material seems to be ok. It does not work with windows 7.

  Does anyone have a suggestion? I'm desperate...

  Thanks for your help...

  OK, I found the solution.

  There seems to be a problem with the firewall and Windows 7. So I just uninstalled the firewall, installed the WLAN driver again and now it works...

  Strange, but ok...

• Flash Player 10.1 is not fully active after that more 50 years, uninstalls and reinstalls.

  There is on 2 weeks, I started to notice this. I want to load games Facebook and it should always be. Then, once he did finally load images were gone and these strange images java coded were in their place instead. My report log has no indication of crashes during this time, however last week I had a getPlus + R has stopped working, an APPCRASH GfxUI and a HP Advisor APPCRASH. Also been make many mistakes. The most recent when you try to reinstall Adobe DLM, I got "Firefox could not install to http://platform.adobe.com/NOS/getPlusPlus/1.6/gp.xpi download error 228".

  When I get a Facebook game it says that I don't have the updated release of the flash player, so I will uninstall, restart my computer, reinstall, restart my computer and still get it. I did it over 50 times and counting. I continue to do that, because each from time to time the flash player is not upward for a few hours, usually when I install a new browser for the sort of 'trick', I guess. He catches on though... cause browser of today has been the opera and it worked fine for about 2 hours, at the beginning of the week, I tried safari with some success for about 4 hours. I'll miss the browser options and my time with this trick seems to fewer hours every time I do it.  I cleared my cache of hundreds of times during this process as well. I really don't understand how to check or set the parameters of flash player if. I think they would have a safety defect that, because I never installed all adobe products when I got the computer, so I guess they came preinstalled and properly defined. Also, when I bought this laptop a few months ago, I had this stupid thing of Norton telling me everytime I logged so I said hell with it and activated the trial version just to make disappear to enable it. I did this about a week and a half, and it seems that it is when everything really started to fall apart. There are so many things, I've tried that I can not even begin to list them all. I've downloaded so many other Adobe tests to see if they will solve the problem, but I don't really know still how or what they are really for. I should mention that I use Windows 7 and connect via wifi. I can browse the internet without any problem and watch YouTube without problems as well. For the most part, only the games on facebook is affected by this. I think he killed some of my drivers, because I went and downloaded a bunch of drivers intel and a flashed in fact "GfxUI" for a moment so that he was installing, and that was one of the accidents I've gotten. I don't really know where else to go from here. I have Internet explorer but rarely use it. Kind of hopeless here. Really, I don't expect solutions to this since nobody else seems to have the same problems. Most people can just uninstall and reinstall so it can be fixed in most of the forums. Well, I guess I'll check and see if anyone has an answer before I take my computer as it is supposed to be guaranteed.

  Hi, ok on disabling Skype add ons. You should be able to do that too in FF. I do not use FF, but I think you click on tools, and there is a menu drop-down? If this is not the case, just go to Mozilla.com and look under Support, then Firefox.

  Microsoft Security Essentials is the most recent Microsoft and includes anti-virus and Anti-Spyware. It does not include a firewall, you can use the Windows Firewall. There is no browser add ons installed, so that's a plus. It is easy to use. You can scan whenever you like and it has other parameters. I use it and have had no problem.

  Before do you tho, you do not want to use the program to uninstall Avast available from there Web site.

  I do not understand the access time you talked of, looks like it is related to the network which I have no way of knowing.

  The adsbluelithium and the adyieldmanager.com's more awkward, especially the last. I think it is from the site and or games. But to be on the safe side, I would go to www.malwarebytes.com and install the free version. I think that when you click on the free download link it takes you to cnet, but it's ok. Just be sure to SAVE to your desktop and use it as a standalone. It is one of the anti-spyware albums and can remove anything it finds. Once you have it on your desktop, disable any browser followed Avast and a real-time monitoring. Then if Malwarebytes has already updated the definitions, click the Update icon, and then click on check for updates. When you have completed the update, run a scan completes.

  OK on the removal of CS5. Also, before the foregoing, check in your add/remove. What is Acrobat.com or Adobe.com? According to, remove it. If you have not tried to remove Adobe Support Advisor, remove it. We will make the Adobe Air/Reader when all the others have been deleted.

  Thank you

  eidnolb

• Not fully restored USMT - Windows 7 - user rights

  After the restoration of the USMT LoadStateprocess, it happens that user rights are not restored on each folder and files.

  Indeed, in the properties-online Security Panel, the list is completely empty even the system group is missing.

  This issue occurs at random on random photos (independent of the file extension).

  We tried to manually reset rights on the folder above to let Windows automatically applies the user rights to the folders and files under.

  Even so, some folders and files are not defined.

  The only solution we found is reset the file-by-file rights.

  Our company is about 1000 restoration with the LoadState each month, and the problem seems to appear randomly.

  We are essentially Windows XP migration to Windows 7.

  We have the same problem with USMT 4.0 and 5.0.

  The ScanState and LoadState the are made with an administrator account.

  Does anyone have this kind of problem?

  Is there something that I can configure to try to solve the problem?

  Thank you.

  Hi Cyril,

  The question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the link below.

  Microsoft Deployment Toolkit:

  http://social.technet.Microsoft.com/forums/en-us/MDT/threads

  I hope that the information above helps you.

• of the Assembly's strong name validation failed "c:\windows\home\ehshell.exe". the file may have been tampered with or it was partially signed but not fully signed with the private key, what should I do?

  After I update to Windows XP SP 3 my media center has completely stopped working and it gives me following e: validation failure of strong name for the assembly 'c:\windows\home\ehshell.exe '. the file may have been tampered with or it was partially signed but not fully signed with the private key.

  What I would do.  I was grinding a lot and nothing has worked so far.

  Stone

  Please answer questions following diagnosis in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years?

• Activation of Windows 7 64-bit edition - retail

  I recently downloaded Windows 7 SP1 64 bit on my Dreamspark account. But the product key provided does not work for my Windows activation. It says "the product key you entered cannot be used to activate Windows on this computer".

  Code: 0xC004C008

  Description: The activation server determined that the specified product key cannot be used.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - HMR9R - JT2H4-DW9VG
  Windows product key hash: 7gQrIRAG7ynWoR7Pgfwk7Fa6EAQ =
  Windows product ID: 00371-703-2235144-06496
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {60302866-DBFE-4BEE-9714-9C978690F5C7} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150427 - 0707
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {60302866-DBFE-4BEE-9714-9C978690F5C7}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-DW9VG00371-703-2235144-064965S-1-5-21-142079802-3989269145-2267061694LENOVOHuronRiver platformLENOVO45CN38WW20111021000000.000000 + 0009EDA3C07018400FE40090409Europe West Standard Time(GMT+01:00)03LENOVOOC-01 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00212-703-223514-00-1033-7601.0000-1462015
  Installation ID: 017425422270337024901623964490082810036950805652497825
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: DW9VG
  License status: initial grace period
  Time remaining: 40260 minute (s) on (27 day (s))
  Remaining Windows rearm count: 3
  Trust time: 26/05/15 13:07:38

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: NgAAAAEAAgABAAIAAAABAAAABQABAAEA6GEGK70tKK3E5SaSmMjkCY4OVjjW/1ZX9CaUlS5z

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: no, table invalid SLIC
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO OC-01
  FACP LENOVO OC-01
  HPET LENOVO OC-01
  MCFG LENOVO OC-01
  SLIC LENOVO OC-01
  SSDT LENOVO PtidDevc
  ASF! LENOVO-CB-01
  SSDT LENOVO PtidDevc
  SSDT LENOVO PtidDevc
  SSDT LENOVO PtidDevc
  UEFI LENOVO OC-01
  UEFI LENOVO OC-01
  UEFI LENOVO OC-01

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• "Stop 0x000000A5 the BIOS of the system is not fully ACPI-compatible every time as the installation of a new windows 7 integral over Inspiron 15R N5110.

  Hello

  I have installed Windows 7 ultimate 64 bit on many brands of laptops, but when I installed it on Inspiron 15R N5110, (core i5 and 4GBRAM). I faced an error at startup of windows 7 after completing the installation.
  NOTE: When the installation finished and restarted my computer, this window shown to me.
  
  
  
  Two options from the two options above I chose, I found myself with the blue screen:
  
  
  Error blue screen said something these ' BIOS in this system is not fully ACPI-compatible. Contact your system provider for an updated BIOS I don't know what that means and I don't know where is the culprit. I wish I could capture this error screen. However, it is impossible to do because I wasn't the Windows environment. 

  
  

  Even if the error related to BIOS necessary for the update, so how could I update as long as windows has not begun.
  
  
  
  
  
  
  
  
  Is there something that needs to be configured in the BIOS before installing Windows 7 on Dell laptops.
  I'm quite surprised that the previous system was windows 7, but it was Home Premium.
  
  
  The strangest thing is when I tried to start to repair the disk and even disk instillation of Windows to resolve startup problems, I found that this startup repair couldn't fix problems.
  
  
  When I tried to do these steps:
  
  
  1. Insert your Windows XP CD into the CD-ROM or DVD-ROM drive, and then restart your computer from the CD.
     Note Some computers may require you change basic input/output system (BIOS) settings before you can start the computer from a CD-ROM. For more information about changing the BIOS, see your computer documentation.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER.
     Note By default, the administrator password is blank in Windows XP Home Edition.
  5. By default, Hiberfil.sys is usually located in the directory root (C:\). At the command prompt, type del hiberfil.sys and then press ENTER.
  6. Restart the computer.
  When I arrived at "system recovery options, I saw that my system is listed, then I chose then, but I found myself with this ' this"system recovery options"version is not compatible with the version of windows that you are trying to fix." Try to use a different compatible with this version of windows recovery disk, even if I'm sure only that the same disk to install windows I have installed since.
  
  
  NOTE: I do not add RAM or other devices. There is a windows 7 Home premium and I just re installed a windows 7 ultimate 64-bit. I don't really know what the previous windows version 7 is 32 or 64 bit.
  I checked the dell forum and I found ' your computer goto your BIOS F2

  That goto advance Select ATA to instead of AHCPI save the setting, and then try to restart your Windows 7

  hope it will work. »

  But he did not AHCPI, but I found AHCI and let ATA instead of AHCI, but no difference that happened.

  Hello

  Check the steps suggested by LoneWolf1983 from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/stop-BIOS-not-fully-ACPI-compliant/25210db0-5491-4fc8-99c2-ec0361dd8388

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Thank you very much

  I checked this thread, and I found this solves the problem

  I have changed the serial port in the BIOS for 2F8/IRQ3 and I have not had a blue screen since... fingers crossed, it's her!

  But as you know that no matter what BIOS are different from others.

  Thus, I have not found any serial port in the BIOS to be replaced by 2F8/IRQ3

  NOTE: My problem is when you install a new version of Windows.

  In addition, every time a new windows installation 7 and facing the Blue error screen, I started to Macrium Rescue CD and clicked "fix windows startup", and then when restart my windows, I was not facing the the Blue error screen. If windows starts successfully.

  If the blue screen error was tied to the BIOS, the Refelct Macrium rescue CD wouldn't no matter what (not know this problem)

• Activation of Windows 7 is not available

  I have Virus Suli.exe in system32 cannot fix and can not remove the virus, and cannot activate windows!

  1 starting in the activation of windows Search Type click activate windows. <> > Suli.exe error?
  2-antivirus Spyware, scanned.

  3 - Avast antivirus, scanned.
  But no Virus how I don't know...!
  Please help me I do not have my CD now. but it's windows 7 Original.

  The best approach for a very infected PC is a 'Clean Install'
  as you can never be certain that every last bit of 100% infections have been removed.

  That said if you have time and want to see how you can go to eliminate viruses, malware and bots then read on.

  Details of virus removal
  Download the free version of Malwarebytes, it will detect and remove most of the viruses.
  http://www.Malwarebytes.org/products/malwarebytes_free

  ESET Online Scanner:
  http://www.eset.com/us/online-scanner/

  Kaspersky Rescue Disk:
  https://support.Kaspersky.com/viruses/RescueDisk
  Kaspersky Rescue Disk 10 is designed to scan and disinfect x 86 and computers compatible x 64
  who have been infected. The application should be used when the infection is so severe
  that it is impossible to disinfect the computer using anti-virus applications or malware removal utilities

  Norton Power Eraser
  http://security.Symantec.com/nbrt/NPE.asp?lcid=1033
  Note: Because the Norton Power Eraser uses aggressive methods to detect these threats,
  There is a risk that it can select some legitimate programs for removal.
  You should use this tool very carefully, and only after you have exhausted other options.

  Also:
  Take a critical look at your current AV software, it is produced to date or old and obsolete.

  Unexplained computer behavior may be caused by deceptive software
  http://support.Microsoft.com/kb/827315

  ===========================================================

  Download Windows 7 proper. ISO file that includes Service Pack 1
  (Note: must match for your product key version)

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
  Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

  How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  After downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After you have entered the user name and password that you will be asked:
  "Type your Windows product key", do not enter a key.
  Also located just below the box where you enter the key is a box with a check mark
  to "Automatically activate Windows when I'm online", remove the check box and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers ===============================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Windows will not be activated

  Desktop HP-P2-1343W
  Product number: H3Z09AA
  E2-1800 APU/Radeon AMD
  64-bit Windows 8 (OEM preinstalled)
  Product ID: XXXXX-XXXXX-XXXXX-XXOEM

  The acquisition of the new system in a few years. 8.1 update when it came out. I had a problem a few weeks ago. Had a malware and had plenty to get him, but when I rebooted, it wouldn't take my key (error code: 0xC004C003).

  Got the new key (OEM product key) and Support HP recovery discs, it will take the new key (.. .and other full recovery with discs), but will not be activated. After a few hours, I get the message "Activate Windows". Also of no no to 8.1 again.

  Microsoft technical support (CAT) said I needed a file ISO OEM because my version was a commercial version! (But it was preinstalled) Don't know if he misunderstood!

  Tried to get a reminder of support for MS, but waited a whole day and still no call. will try again when I get the chance and the time to wait, but was kind of busy, so much going on right now.

  What I've missed and what can I do?

  Suggest that you call HP since it is society which you provided with the recovery disk. With respect to the key, it should be part of / embedded in the recovery media, check this with HP.

  J W Stuart: http://www.pagestart.com

• I have this error 0 x 80070005 (access) denied when I activated my Windows server 2008 R2 64-bit

  I have this error 0 x 80070005 (access) denied when I activated my Windows server 2008 R2 64-bit. Here's the print for the activation screen. Your help is most appreciated. Thank you

  Hello Mika Wong,

  The question you have posted is related to Windows Server 2008 and would be better suited on the TechNet support forum. I suggest post you the question on the TechNet support forum for more information.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• Unable to get the Windows updates. Activation of Windows icon "this copy of Windows is not activated." Cannot be enabled. Please notify.

  I was using Windows XP Professional for over 3 years with no problems. I get Windows updates automatically recently, I am unable to get the Windows updates. Activation of Windows icon is now displayed "this copy of Windows is not activated. What is going on?  Tried to reactivate without success.

  I tried with the key of product without success. Please notify. Thank you, Mark to * address email is removed from the privacy *

  I was using Windows XP Professional for over 3 years with no problems. I get Windows updates automatically recently, I am unable to get the Windows updates. Activation of Windows icon is now displayed "this copy of Windows is not activated. What is going on?  Tried to reactivate without success.

  I tried with the key of product without success. Please notify. Thank you, Mark at * address email is removed from the privacy *.

  Click HERE. Follow the instructions. I recommend to use Guided Help.

• I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

  Windows has no

  I had to spend my PC this morning. Moving it, I decided to implement a new network card. When I reconnected it all the cables, I plugged my USB mouse on another USB port where it had been plugged in before. The computer is more than 7 years old and I've never had a problem with the front Windows Validation. I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

  When Windows checks to see if you have moved your copy of Windows to "another computer", among other things, that his focus on the identification of several strands of material in the computer to see if they are different than when Windows was first installed.  I do not remember the list for now, but I remember that the network card is one of the pieces - and IIRC it is 'valuable' higher than others to reach the conclusion.

  You probably other elements has changed over the past seven years and now Windows has decided to have a "new" computer  Assuming that you haven't changed the motherboard - if you had, you would have had this issue at the time wherever you did--your installation is still legal.  Reactivate using your original license key. It should work online, but you will need to call the number that appears in the error message from re - validate.

• Windows Vista will not be activated. I'm unable to activate by phone.

  Why not line activation sms enabled windows, activation of the phone is very expensive

  original title: activation of sms line

  I see no reason why your system should not turn on correctly.

  What happens if you try posting at www.microsoft.com/genuine/validate ?

  It must pass.

  Otherwise, go to the Diagnostics page - www.microsoft.com/genuine/diag and see what it has to say.  Follow any instructions on the adjustments of the system on the site of diagnosis and then try validation again.

  Once validation passes, try the internet activation once more - if it still doesn't work, then you will * have * to use activation by telephone and speak to an operator.

  You can try to resolve your problems with the updates of Windows in a better forum, in your own language - look at the top right of this window and change the region affecting your own (Taiwan?) - then go to Windows updates to the forums there.

• It is not available in my Windows 7 Ultimate 64 - bit DirectX DirectDraw.

  Original title: DirectX DirectDraw

  It is not available in my Windows 7 Ultimate 64 - bit DirectX DirectDraw.  I have a DVR security who needs DirectDraw to send the video from the camera to my computer.  How can I make available DirectDraw?

  Hello
  DirectDraw is part of Microsoft's DirectX API. DirectDraw is used to render graphics in applications where top performance is important. DirectDraw also allows applications to run fullscreen or embedded in a window like most other MS Windows applications
  You can follow the steps in the article and see if it helps.
  DirectDraw or Direct3D option is unavailable
  http://support.Microsoft.com/kb/191660
  See also:
  DirectX: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/DirectX-frequently-asked-questions
   

• 'original!' activation key Windows 7 does not work on Mac!

  Dear all,

  I recently bought a Mac, and I was hoping to use my original windows 7 Home Edition I used before on my pc in the House.
  Unfortunately I get messages from Security Center,... .saying my windows could not be activated, I have to type a different product key, or I have to buy a... etc.
  I don't know who I assume to address with this problem?... Microsoft or Apple?
  I saw people with similar problems around forums, but found the same questions for example I saw someone who had problems, because its windows was not a true produced.
  In any case... If someone could give me an answer, or direct me somewhere I can find a solution, I would be really grateful.

  Kind regards

  Inimma

  Dear all,

  I recently bought a Mac, and I was hoping to use my original windows 7 Home Edition I used before on my pc in the House.
  Unfortunately I get messages from Security Center,... .saying my windows could not be activated, I have to type a different product key, or I have to buy a... etc.

  OEM System Builder licenses are usually related to the first computer on which you install. You could always phone activation if the house built computer is no longer in use:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  I don't know who I assume to address with this problem?... Microsoft or Apple?
  I saw people with similar problems around forums, but found the same questions for example I saw someone who had problems, because its windows was not a true produced.
  In any case... If someone could give me an answer, or direct me somewhere I can find a solution, I would be really grateful.

  Kind regards

  Inimma