4 GB of ram shows 932 usable

I have a HP pavilion laptop windows 222tu G6 8. first I used win 7 64 bit, but the drivers were not compatible, so put on level to windows 8 pro. It has installed a system of 32-bit operating... I tried all possible measures, including the re install. I wanted to convert it to 64 bit win8. will that solve my problem or give me some ways to suggestions.

Hi Shibinkta,

Method 1: I suggest you try the following steps.

Hold down the Windows key and press R,.
Type msconfig in the run (or the search box) and press ENTER.
In Windows System Configuration, click the Startup tab,
Click the Advanced Options button.
Take off the box "Maximum memory,"
Click OK,
Click on apply, then OK to exit.
Restart the computer for the change to take effect.

Method 2:

Step 1:

Updated THE system BIOS

The problem can occur because THE system BIOS is outdated. If you have an old computer, the system may be unable to access any of the installed RAM. In this case, you must update the BIOS OF THE system to the latest version.

To update the BIOS of your computer, visit the website of the manufacturer of your computer to download the update of the BIOS. Or contact the manufacturer of your computer for help.

Step 2:

Check the BIOS settings

The problem can occur because some BIOS settings are incorrect.

a. enable the memory remapping feature

I suggest you to check the BIOS settings to see if the memory remapping feature is turned on. Remapping memory access Windows for more memory. You can enable the memory remapping feature in the BIOS by starting the configuration of the system. See the Guide to your computer for instructions on starting the installation of the system on your computer. The name of the memory remapping feature may be different for different hardware vendors. This may be listed as remapping memory, memory expansion, or something similar. Don't forget that your computer can not supported the memory remapping feature.

Change the size of video opening AGP in BIOS settings
I suggest you to check the BIOS settings to display the amount of memory that you allocated to AGP video opening. It's the memory that shares with the video card that is used for texture mapping and make the system. This memory would not be served by the system, because it is locked by the video card. You can adjust the size of video opening AGP in BIOS. Standard settings are "32 MB," "64 MB", "128MB" and "Auto". After you change this setting in the BIOS, restart your computer and then check the usable memory. You can test each setting to see which offers the best results.

WARNING:

BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

Method 3:

The problem can occur because there are problems with the physical RAM installed. Then

Step 1:

Check if you have bad RAM memory

To check if you encounter this problem, turn off the computer, unplug the computer, and then swap the order of the memory.

Step 2:

Make sure that the arrangement of memory is correct

Refer to the User Guide for the computer to determine in what order the modules of memory must be inserted in the memory locations. The system may ask you to use specific locations when you use not all the places available. For example, the computer has four available slots. But you may need to use the slot 1 and slot 3 If you want to use only two memory modules.

Step 3:

Check if the memory cards spacers are used

If you use a pimple card memory to contain several modules of memory on the computer, the system may require specific configurations for this scenario. Therefore, usable memory may be less than expected.

Also check out the link:

http://msdn.Microsoft.com/en-us/library/aa366778%28VS.85%29.aspx#physical_memory_limits_windows_8

It will be useful. For any other Windows questions feel free to get back to us. We will be happy to help you.

Tags: Windows

Similar Questions

I tried "Remapping ACTIVE" in BIOS > Advanced tab in my Windows 7 Pro 64 bit, 8 Gb RAM (3.24 usable) computer and get the Blue Screen of Death.

My computer is

Intel Core i7 860 @ 2.80GHz processor

Installed RAM 8 Gb (usable 3.24) - G.SKILL RIPJAWS, DDR3 1600 GB PC3-12800 2 x 4 sticks.

System type: 64-bit

Motherboard: ASUSTek Comp Inc. Model: P7P55D
BIOS Date: 2009-12-07 Ver: 08.00.15

Operating system: Windows7 Professional 64-bit Service Pack 1

GeForce GTX 275

Tried "Remapping ACTIVE" in BIOS > tab advanced, then restarted and the system was fine and kicked + 100%

(Checked system properties - display of 8 GB of RAM installed perfectly usable)

then stop. Then restarted the system, but after the system attempts to restart I get "Blue Screen of Death" - unstable system and "Dumping Memory. So now, he is off again.

Necessary assistance in this regard, been looking for solution for a while.

Dear Gerry,

I think I solved my problem.

I have reset the motherboard and CMOS by removing the battery.

I now get on my system properties
-installed memory 8Gb and (usable 6.99)

Thanks for your help once again.

HP Pavilion G6-2229tu: 932 usable with Win 8 32-bit RAM problem

Hello

I had a gain of 8 32 bit OS on my laptop and I saw 4 GB Ram and usable 932, I tried with two options to change the usable RAM but no luck , now, I have updated to OS to win 10, can someone help me solve the problem of RAM.

Thank you

MD

NO ONE HERE TO HELP, CLOSE THE TOPIC... disappointed

Spoiler (Highlight to read)

64 bit computer 8 GB of RAM but windows shows only usable 3.25

OK, I got the original 6GB (3x2gb) RAM (1600), installed on a MSI 880GM-E43 motherboard and a Phenom II X 4 (I think either 3.6 or 4.0 Ghz) and windows all read well. I buy a new motherboard Gigabyte 970 a - UD3 and another key to 2 GB RAM and install. Now when I go to windows, it says properties

"Memory (live RAM) installed: 8.00 GB (3.25 GB usable). So firstly that I went into the BIOS to check if it shows the correct information and he did. Then I changed my CPU speed clocked 3.4 to 4.0 Ghz. I loaded windows and he always says the same thing "memory (RAM) installed: 8.00 (3.25 GB usable)" and now, the processor has not changed either "processor: AMD Athlon (TM) II X 4 965 3.40 GHz processor". " I even reinstalled the new drivers and it still shows the same info.

CAN ANYONE HELP!

Specifications of the computer:

Windows 7 Home Premium - 64-bit

AMD Phenom II X 4 - 4.0GHz

Kingston HyperX Blu 8 GB (4x2Go)

Gigabyte a 970 - UD3

VisionTek Radeon HD 5750

Strangely, even if the memory is entered correctly, it stil reports way less. Don't know why but files seems to correct the problem...

No doubt you are overclocking... 'Properties' always reports the chip actually, not the speed it is running at a time. Was it to do, it is time when your chip would show at 800 mhz... waaaaaaaaaaaaaaaaaaaah... :-)

8 GB of RAM shows that only 2.85 GB usable

Dear team

My 32-bit Windows 7 system shows only 2.85 GB usable out of 8 GB of RAM in the system properties. Is there a problem with my PC. Help, please.

Monday, June 25, 2012 16:09:46 + 0000, JOBYTJOHN wrote:

My 32-bit Windows 7 system shows only 2.85 GB usable out of 8 GB of RAM in the system properties. Is there a problem with my PC. Help, please.

No, there is no problem, other than your lost money by buying
more than 4 GB.

All versions of Windows 32-bit client (XP/Vista/7 not only) have a 4GB
address space (64-bit versions can use much more). It's the
theoretical upper limit beyond which you cannot go.
But you can't use the whole address space. Even if you have a
Address space of 4 GB, you can only use around 3. 1 GB of RAM. It's
because some of the space is used by the hardware and is not available for
operating system and applications. The amount you can use varies, depending on what hardware you have installed, but can
range from as little as 2 GB to 3.5 GB. It's usually around
GB 3.1. you are a little below this average.

Note that the hardware is using the space, not the real address
The RAM itself. If you have a larger amount of RAM, the rest of the RAM
goes unused because there is no address to map space to.
Ken Blake, Microsoft MVP

4 GB system RAM shows usable 2.75

Mr President.

I use Windows 7 genuine version and my system following configurations

HARD DRIVE: 500 GB

OPERATING SYSTEM: WINDOWS 7

RAM: 4 GB

: 11 3 GH ATHLON PROCESSOR

But the system showing 2.75 usable space for the RAM of 4 GB of RAM, please guide us to improve space RAM in my system to fix my system speed and

to speed up the system, please guide me the techniques and solutions or advice

and also guide to speed up the internet in my system.

Mr. bond 007

If you use a variant of 32-bit Windows 7.

There is a limit of address space TOTAL of 4 GB for 32-bit Microsoft operating systems.

The card mother and video card requires little RAM depending on the configuration. The total memory is developed taking into account first of all hardware resources, and then RAM is added for a TOTAL of 4 GB.

If you want to get the best out of 4 GB of RAM or more, you must run the 64-bit version operating system.

Note that even the 64 - bit variants may lose 0.25 GB where only 4 GB of RAM is installed.

Speed of the Internet is well governed by the speed provided by your ISP, which is in turn linked to what level of speed you pay your ISP.

It can also be affected by malicious software and browser tool bars. Uninstall all toolbars on your computer and as a first step towards malwware, download and run Malwarebytes...

http://www.Malwarebytes.org/

4 GB Ram installed but showing GB usable 2.49

I need more ram to run an application that I have G32 HP windows 7 86 X enterprise edition with 2 GB of ram later I upgraded RAM with 2 GB more, in the BIOS it shows 4 GB but in the computer shows GB 2.49 usable properties,

Troubleshooting I've done so far

Changed the setting in msconfig and checked on optimize ram, change parameters with the processors, but nothing is

Please suggest

The amount, he can use isn't always 3.2 GB. It varies depending on what

you have the hardware.

All versions of Windows 32-bit client (XP/Vista/7 not only) have a 4GB

address space (64-bit versions can use much more). It's the

theoretical upper limit beyond which you cannot go.

But you can't use the whole address space. Even if you have a

4 GB address space, you can use about 3. 1 GB of RAM. It's

because some of the space is used by the hardware and is not available for

operating system and applications. The amount you can use varies, depending on what hardware you have installed, but can

range from as little as 2 GB to 3.5 GB. It's usually around

3. 1 GB.

Note that the hardware is using the address space, not the real

The RAM itself. If you have a larger amount of RAM, the rest of the RAM

goes unused because there is no address to map space to.

4 GB of ram installed, but usable only 2.43 GB

Hello.

Recently, I upgraded my new laptop (thinkpad L512: 2 GB of ram, originally) with a new 2 GB ram.

I was expecting to the usable memory must be at least 3 GB, but it appeared that only 2.43 GB is used.

I don't know why this is happening.

I checked the BIOS and changed the memory location two, but he showed that only 2.43 GB is used.

Memory: 2 GB PC3 - 10600 DDR3 1333 MHz SODIMM Memory (1 DIMM) SDRAM - 2 c.

What's wrong?

Intel graphics card have no memory dedicated, but uses some of the computer's system memory. The amount of memory used for the graphics might be an amount fixed or may vary up to a maximum amount. It depends on if the computer manufacturer has configured the computer to use a fixed amount, a dynamic amount (ranging up to a maximum amount) or a combination of fixed and dynamic graphics memory amounts.

The amount of memory usable did you have before the upgrade to 4 GB?

What version of Windows are you using? It is 32-bit or 64-bit?

What is the model number of your computer (for example: 4029-3EG)?

-gan

Windows 7 x 64 Ultimate 6 GB of ram 4 GB usable?

What does that mean? I have 3 RAM sticks of 2 GB (6 GB of DDR3)
and Windows is seein' the 6 GB of memory, but reported only 4 GB usable?
Whats up with that? Award BIOS GA-EX58-UD5 motherboard.
There seems to be some serious problems with Microsoft and hardware vendors... bfxtech.com

Hello

Go to the BIOS and enable the memory remapping !

André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

HP 1000-1312tu had installed 6 GB of ram, but it shows only 929 usable

my laptop running windows 7 ultimate x 32 .intel (r) Pentium (r) @2. 40 GHz I have 6 GB of ram installed and usable only 929. I already tried many things and I can't do bugs... Please help me

Hi @minxfiles ,

Welcome to the HP Forums!

This is a good place to find answers and advice!

You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

I understand that you have 6 GB of ram and it is only readable 929 reading.

Just to be sure you're correct DDR3 ram installation?

Installing the chips of RAM, they must be of the type suitable and properly matched. You can have 2 @2 for 4 GB of ram or 2@4 GB to 8 GB of ram. To have 6 GB of ram, you would need 1@6 GB to 6 GB of ram.

If you have added a 4 GB of ram with the original 2 is it came with, it is very likely what is causing the problem.

Good luck!

6 GB of RAM but 4.40 GB usable

I have 6 GB of RAM installed in my system, but it shows GB usable 4.40. I have windows 7, 64 - bit ultimate OS.

Hi Sam,

Please see the following article for more details about your question.

Usable memory may be less than the memory installed on Windows 7 computers
https://support.Microsoft.com/kb/978610?WA=wsignin1.0

Warning of the BIOS:

BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

Hope this information was useful. Just reply with the results and if you need help or have any other question about Windows, we're here to help.

Why properties system displays installed memory (RAM): 8,00 (3.47 GB usable) GB

Why properties system displays installed memory (RAM): 8,00 (3.47 GB usable) GB
Windows Pro 64-bit
8 GB RAM
1 TB harddrive
ASUS P7H55D - M EVO motherboard
New Windows installation has the same problem.

Control Panel > system does not show the usable memory, only the memory installed

The Task Manager > Performance demonstrates both installed, available and free

RAM drop down from 3.9 to 2.66 4 GB usable

I can't open my laptop with windows pro 8.1 (RAM 4 GB (usable 3.9)), so I got to someone else for help. and then when I get it back it was installed windows 7 instead and ram become usable 4 GB 2.66.

So my question is: what can I do to recover normal usable RAM?

Thank you

You take it back to the person who helped and ask to fix it properly. The person seeks to have installed Windows 7 32 bit in this case, you will never be able to increase the usable with the current operating system RAM...

4 (2.62 usable) GB RAM?

Please help me with this problem:

System

--------------------------------------------------------------
OS: Windows 7 SP 1
Processor: AMD C-60 with radeon HD 1.0 Ghz graphics card

installation of memory (RAM): 4.00 GB (2.62 GB usable)

system type: 32-bit

---------------------------------------------------------------

Why my GB of RAM only 2.62 usable?
How to set and get all the existing ram?

It is a feature, not a bug. Although the 32-bit versions of Windows have an address space of 4 GB of memory, some of these addresses are used for different hardware devices installed on your computer. Any "memory address" used for a piece of hardware is not available as the address of your RAM. So, even if your system can install 4 GB of RAM, the amount of addressable RAM in fact (i.e. usable) of Windows will be a little less.

With 4 GB of physical RAM installed, the usable RAM is often around 3.2 GB, but maybe you have a video card that has a lot of built-in RAM (which needs the address space, even if it has its own physical memory chips) or maybe you have several PCI or PCIe cards that use the memory address space.

If you want to have more RAM available for Windows, you need go to the 64 bit version of Windows 7.

See this article for more details--> http://web.archive.org/web/20101111232219/http:/members.cox.net/slatteryt/RAM.html

Satellite A100-62 of the bios, you see only not 4GiG ram?

Hello

So before I bought and placed 4GiG ram in my satellite I looked on the site of toshiba connected and so on... found my cell phone and I noticed Max ram is 4096 M, great, I thought, off I went and got 4GiG ram and installed 2 giga both to make sure that the ram is not defective "", then when the two sticks has been tested and bios and windows that I have placed both at the same time that windows has "known issue" you see don't not 4GiG ram which is OK by me, I guess, but then I noticed that the bios of the laptop sees 3063 Mb which is * very strang me! *

When I called toshiba, they said yes, you'll still 4GiG of RAM, but what confused me is if I installed then bios should also show the fact that theres 4gig 4gig?

can anyone tell me please what continues

Thank you

Hello

already checked the discussions here in the forum? I mean, West search and there are MANY threads on your problem. Please check the forum and you will get your answer.

Short description of your problem: bios does not display correctly the amount of RAM that is installed on your system, but the RAM is perfectly usable BY THE SYSTEM, but NOT by the operating system.

Please visit the following link to learn more about the problem of VISTA and XP 4 GIG-> http://www.brianmadden.com/content/article/The-4GB-Windows-Memory-Limit-What-does-it-really-mean-

See you soon

4 GB of ram shows 932 usable

Similar Questions

Maybe you are looking for