4 GB Ram installed but showing GB usable 2.49

Similar Questions

• C55-A-19N satellite: 4 GB of RAM installed but only 2.39 is usable

  Hello

  I have Toshiba satellite A-C55-19N with Windows 7 32 bit. It has 4 GB of memory installed, but only 2.39 is usable.

  BIOS is the latest.
  I can't find the option to change anywhere in the system.

  My desktop with core i5 - 2500K can see 3.29 GB to 4 GB of RAM, why toshiba can not see?

  32-bit systems (no matter if its Win 7) Win XP, Vista etc.) supports only 3.2 GB of RAM
  It is the 32-bit boundary.

  The other small part (300 MB roundabout) is shared by the graphics card.
  Therefore, the system displays only 2.39 GB RAM

• dv9207us: dv9207us: 4 GB of Ram installed, but only 3 GB useful?

  I have a dv9207us laptop with 4 GB of ram installed. BIOS shows 4 GB of ram, but said information system control panel

  4 GB installed (3.0 GB usable). Anyway to get the full 4GBs?

  Details:

  --------------------------------------------------------

  8.1 Windows 64-bit

  Looks like I got the latest version of the BIOS from F.2e

  CPU: Intel Core 2 Duo T7200 Intel

  nVidia 7600 graphics

  I have a similar HP (dv9933nr) with 4 GB laptop and it shows the complete 4GBs.

  bocajoe wrote:

  I have a dv9207us laptop with 4 GB of ram installed. BIOS shows 4 GB of ram, but said information system control panel

  4 GB installed (3.0 GB usable). Anyway to get the full 4GBs?

  Details:

  --------------------------------------------------------

  8.1 Windows 64-bit

  Looks like I got the latest version of the BIOS from F.2e

  CPU: Intel Core 2 Duo T7200 Intel

  nVidia 7600 graphics

  I have a similar HP (dv9933nr) with 4 GB laptop and it shows the complete 4GBs.

  Your system is an older model of HP and has a built in graphics that partaking of the RAM. That's why your RAM is showing as he shows.

• 4 GB of ram installed, but usable only 2.43 GB

  Hello.

  Recently, I upgraded my new laptop (thinkpad L512: 2 GB of ram, originally) with a new 2 GB ram.

  I was expecting to the usable memory must be at least 3 GB, but it appeared that only 2.43 GB is used.

  I don't know why this is happening.

  I checked the BIOS and changed the memory location two, but he showed that only 2.43 GB is used.

  Memory: 2 GB PC3 - 10600 DDR3 1333 MHz SODIMM Memory (1 DIMM) SDRAM - 2 c.

  What's wrong?

  Intel graphics card have no memory dedicated, but uses some of the computer's system memory. The amount of memory used for the graphics might be an amount fixed or may vary up to a maximum amount. It depends on if the computer manufacturer has configured the computer to use a fixed amount, a dynamic amount (ranging up to a maximum amount) or a combination of fixed and dynamic graphics memory amounts.

  The amount of memory usable did you have before the upgrade to 4 GB?

  What version of Windows are you using? It is 32-bit or 64-bit?

  What is the model number of your computer (for example: 4029-3EG)?

  -gan

• 8Gig RAM installed, but only 3.99Gig 'available. '

  I opperating 64-Bit Windows 7 Professional with Intel i7 860 1156 Core and 2 sets of "CORSAIR XMS3 4 GB (2 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800) desktop CMX4GX3M2A1600C8 memory model" for a total of 8gig, but Windows says that 3.99gig is usable.

  It is said:

  "Processor: Intel Core i7 CPU 860 to 2.80 GHz 2.80 GHz.
  Installed memory (RAM live): 8,00 (3.99 GB usable) GB
  "System type: 64-bit operating system.

  parameters of msconfig to limit memory were studied and found to not be have been checked...

  any ideas?

  Hello chillinbro07,

  Thanks for posting on the Microsoft answers Forums.

  I did a bit of research as part of the supported memory card mother EVGA for DD3-1600:

   

  DDR3-1600
  APOGEE AU1G733-16GH905
  APOGEE AU2G733-16GH905
  Kingston KHX12800D3LLK3/3GX 1 GB
  Kingston KHX13000D3LLK2/2GX 1 GB
  CORSAIR TR3X3G1600C8D/ver2.1 1 GB
  Ver4.1-CM3X1G1600C8D4/CORSAIR 1 GB
  CORSAIR CMD4GX3M2A1600C8 Ver5.2
  CORSAIR CMX4GX3M2A1600C9 Ver8.1
  CORSAIR CMD8GX3M4A1600C8 Ver3.1
  CORSAIR CMX8GX3M4A1600C9 Ver9.1
  CORSAIR TR3X6G1600C8D/ver2.1 2 GB
  2 GB CORSAIR TR3X6G1600C9
  G.SKILL F3-12800CL9D-2GBNQ 1 GB
  G.SKILL F3-12800CL7D-4GBPI 2 GB
  G.SKILL F3-12800CL7D-4GBRH
  Kingston KHX1600C8D3K2/4GX
  PQI 2 GB MFADR501PA7001
  OCZ 2 GB OCZ3X1600LV6GK
  OCZ3P1600LV6GK, OCZ 2 GB
  OCZ 2 GB OCZ3G1600LV6GK

  Your memory is not listed.  Let me suggest to do a clean install with your 4gig of RAM, then after installing the operating system, add the extra 4gig.  See if it works.

  I read somewhere that someone had success in re-sitting their CPU on the motherboard.  If you are comfortable doing this, you can try it.  Otherwise, I would do the same type of memory that they have been reported as compatible for their mother.

  Kind regards

  Edgar
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A100: 2 GB of RAM installed, but Windows displays only 1.99 GB

  Hello everyone again

  I've recently updated the ram in my A100-583 from 1 GB to 2 GB.
  However, although the computer does not seem to run much faster, when I look at the properties of the system in the main general tab, it's only show that there is 1.99 GB it is a problem with the Ram, or is it just a glich with the System Properties window.

  All other system checks indicate that there are 2 GB in the comp... The ram I installed is corsair ddr2 sodimm 667 mhz/pc25300.
  {Any help with this will be appreciated thanks in advance: 8}

  I don t think that it is a problem of memory modules (RAM live).
  What is the BIOS reports?

  Still that memory could be shared with the GPU (graphics card), and the windows OS also uses some of the memory

  Don t you worry and there is everything ok ;)

• RAM INSTALLED BUT NOT START THE COMPUTER

  MR. PRESIDENT IS RESPECTED,

  I HAVE G6-2312AX HP PAVILION NOTEBOOK COMPUTER. WINDOWS 8 IS INSTALLED IN. 4 GB OF RAM ALREADY THERE. NOW, I WANT TO ADD 4 GB MORE. I BOUGHT 4 GB OF RAM DDR3 1600 MHZ AND TRIED TO INSTALL IT. BUT THE COMPUTER DOES NOT. KINDLY TELL WHAT TO DO. JAI HIND

  It seems that if you did not put in a pair of identical bars or has not used the memry guaranteed compatible modules. You cannot use the module that was already there, unless you add is identical in every respect.

  Use only guarantee modules in identical pairs if you want your upgrade memory to work right the first time.

• PS bought and installed, but shows that the trial

  Hi, very new to PS and signed for cloud creative to buy photoshop ($9.99 per month).  I clicked 'buy' and once the installation has been completed he came as the trial version, free for 30 days.  My paid order starts after this test?  I received an email received from "payment" so am curious as to what I paid just for when it is used.   Thanks in advance!

  ~ Gina

  PS - just went my Adobe profile and it shows:

  Plan of cloud creative photography (one year)

  I have chosen the right product?  What is the Plan of the photograph? I tried to Photoshop and I know that I clicked on the button "Buy" under him!

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Some general information for a subscription of cloud

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  http://www.Adobe.com/products/creativecloud/FAQ.html

  http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

  http://forums.Adobe.com/community/download_install_setup/creative_cloud_faq

  What is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  To start https://helpx.adobe.com/creative-cloud.html the Cloud

• Sat Pro P750 - 6 GB of RAM by default, but only 5, usable 16 GB

  Hello! I just buyed a brand new Toshiba Satellite P750 for college and I really like it! It's a very good computer. But he seems to have a little problem. By default, the computer comes with 6 GB of ram installed, but in the control panel of the system, it shows 6 GB (usable 5.16). I heard that it can be problem like that if you try to have memory on a computer i7 based to heart. The thing is I had no memory, the computer comes with 6 GB. Windows 7 64 bit is installed.

  Sorry for my English and thanks in advance!

  Post edited by: tidge789

  To be honest I don t understand your problem. New notebook with factory settings is optimized to run stabile and Toshiba the guys who designed the recovery image set these options to provide portable performance best and stabile.

  In my opinion you shouldn't change anything. Why don't you play with these settings?
  Well equipped operating system Don t touch.

  Optimize the operating system pre-installed for your needs and be happy.

• 64 bit computer 8 GB of RAM but windows shows only usable 3.25

  OK, I got the original 6GB (3x2gb) RAM (1600), installed on a MSI 880GM-E43 motherboard and a Phenom II X 4 (I think either 3.6 or 4.0 Ghz) and windows all read well. I buy a new motherboard Gigabyte 970 a - UD3 and another key to 2 GB RAM and install. Now when I go to windows, it says properties

  "Memory (live RAM) installed: 8.00 GB (3.25 GB usable). So firstly that I went into the BIOS to check if it shows the correct information and he did. Then I changed my CPU speed clocked 3.4 to 4.0 Ghz. I loaded windows and he always says the same thing "memory (RAM) installed: 8.00 (3.25 GB usable)" and now, the processor has not changed either "processor: AMD Athlon (TM) II X 4 965 3.40 GHz processor". " I even reinstalled the new drivers and it still shows the same info.
  CAN ANYONE HELP!
  Specifications of the computer:
  Windows 7 Home Premium - 64-bit
  AMD Phenom II X 4 - 4.0GHz
  Kingston HyperX Blu 8 GB (4x2Go)
  Gigabyte a 970 - UD3
  VisionTek Radeon HD 5750

  Strangely, even if the memory is entered correctly, it stil reports way less. Don't know why but files seems to correct the problem...

  No doubt you are overclocking... 'Properties' always reports the chip actually, not the speed it is running at a time. Was it to do, it is time when your chip would show at 800 mhz... waaaaaaaaaaaaaaaaaaaah... :-)

• upgrade to 64-bit RAM of 2 GB installed (1.74 GB usable) to 4 GB installed (always 1.74 GB usable)

  I recently replaced 2 sticks of 1 GB RAM in both slots of my HP G56-127NR Notebook PC with two new sticks of 2 GB of RAM in a system Windows 7 Home Premium 64 - bit, which was initially sold as expandable to 16 GB of RAM.  Each test diagnosis, I was able to find and run indicated that all 4 GB are good.  Information system on the computer indicates 4 GB has been installed, but on system properties, it displays "4.00 GB installed (1.74 GB usable).  I checked the BIOS and have no doubt that the latest available version is installed.  Everything seems to work fine except that he has not taken any speed and when you monitor the memory usage with Task Manager or resource monitor it shows quite clearly that the new memory is not used even if it is seen.  Resource monitor seems to indicate that he was caught for the material.  I have not changed any hardware (with the exception of the memory sticks) associated with this computer.  HP dodge the whole issue because they say it is beyond their life expectancy of support for this device?

  PML...

  First of all, thank you for your response to my problem.  It (your answer) is very comprehensive and indicates you have given serious thought to my problem and did considerable work on my behalf.  I am deeply grateful.

  Then, I'm happy to announce that I came across a solution and my problem is now solved.  Here's what I did for the real "fix". (I tried and did a lot of other things too numerous to list here and in fact worthless because they did not work)-

  1. I removed a barrette 2 GB two sticks that I bought to replace the two sticks of 1 GB supplied with the machine.  I was curious about whether it should start and he did it without any problem.  Once it has started, I checked the page system properties of the icon of the computer on the desk.  He then read 2,00 GB (1.74 GB usable), reading same exact I received on the two sticks of 1 GB before I replaced the and the same reading, also usable as, I received when I installed two sticks of 2 GB (what brought the question initially posed here).

  2. then, I inserted one of the old 1 GB sticks into the empty space next to the slot which is today one of the two new 2 GB sticks. When I started, the 3.00 GB (2, 74 GB usable) read system properties page.  AHA, installed now was correct and the usable increased accordingly.

  3. Finally, I pulled the one 1 GB stand out and replaced with the new second key of 2 GB.  When I started SHAZZAM, 4,00 (3.74 GB usable) GB read system properties page.

  Resource Watch monitor now reserved for hardware dropped now 2.00 GB of memory (or else, is much, much lower than he was while the problem exists).

  It's almost as if I launched or something in a pot and got to work.  Go figure?

  As for some of your specific points-

  4. I had satisfactory experience with Crucial memory so this is where I went in the beginning and I found their analysis tool are excellent and they virtually guaranteed that what they sent me could / should be correct (they are DDR3).

  5. I ran each diagnostic test, that I could find on my machine starting with diagnostic tools in the BIOS.  Everything always showed equally good 4GBs.

  Again, it is really cool to have experts like you PML, to monitor the forums/boards/community/whatever, to come to the rescue of those of us who do not have the necessary expertise.  As part of my little research on this problem, I came across a ton of entries, over several years and in many places of tech under headings of RAM can be used being significantly less than the RAM that is installed.  People came to the top with all kinds of things to look at and try, but I can never remember seen a suggestion to try something like what I did fix successfully what I was able to fix.  I hope that it might work for someone else too.

  thosdelaney

• memory 8 GB installed but usable only 3.48

  I have HP g7-1355dx notebook with Windows 7 64-bit operating system. I've increased the RAM to 4 GB to 8 GB.   The system says I have 8 GB memory installed but only 3.48 GB usable.  I am absolutely sure that I have 64-bit operating system and run msconfig and checked and unchecked the zone memory maximum.  I did a little research on google and did not understand what to do.

  Any help would be appreciated.

  Wade

  Thanks for the quick response.  After I posted my question I decided to spend the original 4 GB with the new 4 GB.  I don't know why, but everything is fine now.  Still, the system recognizes installed 8 GB but now 7,48 GB usable.   In retrospect I wished that I had tried this before you spend 10 + hours of research on the problem without success... even if making the switch seemed counterintuitive.  Hope this helps someone else.

• 4 GB of ram shows 932 usable

  I have a HP pavilion laptop windows 222tu G6 8. first I used win 7 64 bit, but the drivers were not compatible, so put on level to windows 8 pro. It has installed a system of 32-bit operating... I tried all possible measures, including the re install. I wanted to convert it to 64 bit win8. will that solve my problem or give me some ways to suggestions.

  Hi Shibinkta,

  Method 1: I suggest you try the following steps.

  1. Hold down the Windows key and press R,.
  2. Type msconfig in the run (or the search box) and press ENTER.
  3. In Windows System Configuration, click the Startup tab,
  4. Click the Advanced Options button.
  5. Take off the box "Maximum memory,"
  6. Click OK,
  7. Click on apply, then OK to exit.
  8. Restart the computer for the change to take effect.

  Method 2:
  

  Step 1:

  Updated THE system BIOS

  The problem can occur because THE system BIOS is outdated. If you have an old computer, the system may be unable to access any of the installed RAM. In this case, you must update the BIOS OF THE system to the latest version.

  To update the BIOS of your computer, visit the website of the manufacturer of your computer to download the update of the BIOS. Or contact the manufacturer of your computer for help.

  Step 2:

  Check the BIOS settings

  The problem can occur because some BIOS settings are incorrect.

  a. enable the memory remapping feature

  I suggest you to check the BIOS settings to see if the memory remapping feature is turned on. Remapping memory access Windows for more memory. You can enable the memory remapping feature in the BIOS by starting the configuration of the system. See the Guide to your computer for instructions on starting the installation of the system on your computer. The name of the memory remapping feature may be different for different hardware vendors. This may be listed as remapping memory, memory expansion, or something similar. Don't forget that your computer can not supported the memory remapping feature.

  
  Change the size of video opening AGP in BIOS settings
  I suggest you to check the BIOS settings to display the amount of memory that you allocated to AGP video opening. It's the memory that shares with the video card that is used for texture mapping and make the system. This memory would not be served by the system, because it is locked by the video card. You can adjust the size of video opening AGP in BIOS. Standard settings are "32 MB," "64 MB", "128MB" and "Auto". After you change this setting in the BIOS, restart your computer and then check the usable memory. You can test each setting to see which offers the best results.

  WARNING:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Method 3:

  The problem can occur because there are problems with the physical RAM installed. Then

  Step 1:

  Check if you have bad RAM memory

  To check if you encounter this problem, turn off the computer, unplug the computer, and then swap the order of the memory.

  Step 2:

  Make sure that the arrangement of memory is correct

  Refer to the User Guide for the computer to determine in what order the modules of memory must be inserted in the memory locations. The system may ask you to use specific locations when you use not all the places available. For example, the computer has four available slots. But you may need to use the slot 1 and slot 3 If you want to use only two memory modules.

  Step 3:

  Check if the memory cards spacers are used

  If you use a pimple card memory to contain several modules of memory on the computer, the system may require specific configurations for this scenario. Therefore, usable memory may be less than expected.

  Also check out the link:

  http://msdn.Microsoft.com/en-us/library/aa366778%28VS.85%29.aspx#physical_memory_limits_windows_8

  It will be useful. For any other Windows questions feel free to get back to us. We will be happy to help you.

• New IMovie installed, but it shows 'Pause '.

  New IMovie installed, but it shows 'Pause' in the launch pad.  When I opened in App Store, it works perfectly.  How I erased the issue "Paused"?

  Paused is generally refers to the progress of the download. Not sure what you mean by "open in the app store it works perfectly. If I film is installed on your computer and works ok, so I do a restart of your computer and see if that clears the break in the launch pad.

• Satellite L650 - 15G - 4 GB installed but usable 3.87 GB

  Hello

  I hope someone out there can help me out. I bought the laptop mentioned above over the weekend. Memory std for this machine configuration is 3 GB of RAM, noticing that he had x 64 version of Windows, I went out and bought a 2 GB to bump up to 4 GB memory module. The machine, set up and checked the memory in system properties, it says 4 GB installed 3.87 GB usable. On further investigation, I found that 137MB of RAM was material reserved.

  Is there anyway that I can get this comprehensive performance 4 GB RAM and back?

  Help, please.

  Hello

  The small part of the main memory is locked by the graphics card.
  GPU shares a small amount of RAM main. This is controlled automatically by driver graphics card, so you cannot modify it manually.

  Welcome them