400 LaserJet (M401): HP Laserjet 400 Networking Question

Similar Questions

• LaserJet m1212nf network - how to get the printer in a network?

  I have a LaserJet Pro M1212nf, who does not have wireless capability.  I'm on a desktop PC, Windows 7 and am connected with a USB cable from the computer to the printer. There is no other Windows 7 computers on this network, so so far I didn't have need of this feature.

  I spent an hour trying to figure out how to be able to print from my iPad with Airprint, that comes with this printer.

  The printer is shared, which I thought was enough, but apparently not. I found the instructions on the use of a printer wireless, which is not the case, and using an ethernet connection, which I am not, but nothing about the direct USB connection. I found instructions on changing a USB connection to an ethernet connection - this is what I have to do? I hope someone can help with this.

  Should I switch from USB to ethernet to be seen on the computer network and iPad? There must be a way to do this, but I am confused.

  Thank you.

  You should be able to install the printer with the normal software via an Ethernet connection to your router.

  To start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  find and install SOFTWARE to FEATURE FULL if it is available:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3965849

  Install and let me know the result!

  Have a great day!

  -Spencer

  PS this software should include the installation via the USB port option and then convert to USB wireless > Wireless Setup Wizard.

• 64-bit Vista can't find driver Laserjet 3390 network.

  I posted the following in the wrong section, so I posted a retraction here and am reposting in the Networking section. = I have a Laserjet 3390 all in one printer. It is connected to my WinXP Pro PC via USB and works fine as a printer. I do not use the scanner since I have a Canonon scanner that I use. I bought a laptop Dell Studio 1537 comes with Vista Home Premium 64-bit installed. I have networked laptop for PC Windows XP via ethernet cables and a Belkin router. I can transfer files between two PC with no problems. Now, I'm trying to print on the 3390 laptop. When you use the Vista laptop, I can see the 3390 on the network. But when I try to connect to it, a window pops up saying: * the server for the printer "HP LaserJet 3390 Series PCL6" does not have the printer driver installed. If you want to find the right driver, click OK. Otherwise, click Cancel and contact your network administrator or the OEM for the printer correct driver.* * so I chose Vista 64 bit on HP's site and downloaded the Universal Print Driver HPUPD47PCL664.exe. Unzipped this file in a folder on the Vista laptop. Then connected the printer to 3390 again of the Vista laptop that I have done before and when the pop-up occurred, I scoured the folder that contains the unzipped driver of the UPD. I see several .inf files which is what the installer but when I click on OK, a pop up says: * Windows cannot locate a suitable printer driver. To help locate and install a suitable driver, contact your administrator. Any ideas?

  Found a workaround.  Install the printer as a local printer using a USB cable on my Vista laptop first.  IOW, the same 3390 driver who would not install by my first post, installed OK as a local USB connected printer.  Then he forced network and now it prints on the printer connected to my Windows XP desktop PC.

  Got my inkjet HP D5360 working too using the same procedure.

  Skyzoomer

• LaserJet CM1312: Network connect fails installation

  Hello

  When you install CM1312 printer on win 10 64 bit it fails on the last step: connect to a network printer.

  It found the printer on the network correctly, but then fails to connect. Network address is correct - PC Win 7 on the same network connects fine to the same address. Win 10 is perfectly up-to-date and certainly 64-bit. Tried to disable firewall and in time actual anti-virus (McAfee) but no difference.

  Any ideas please?

  FMc

  Hello

  I got it work. I tried to install the HP driver downloaded by logging in as an administrator, what seemed like a reasonable thing to do.

  Don't know why, but I got the idea to try a user account. Of course it took me the admin password, but he then to install OK, and now all is good.

  (We wanted to use the HP driver because the driver used by Windows scan does not scan in PDF format).

  FMc

• LaserJet p1102w wifi question

  Tried to Setup does not appear my HPLaserjet P1102w printer in my network, but the wifi the printer button activates even when I press after that following manuals provided. I deleted and reinstalled the software and drivers a couple of times but nothing do not seem to work. Got tired of th via USB printer connection, I want freedom. The printer is a new.

  The good guys help you.

  @Chrystyna79 This user is having problems of wifi and its wifi print button function is activated.  Thank you.

• LaserJet 4100: Installation on HP LaserJet 4100 networking problem

  I recently bought a JetDirect 610N printer card and my computer does not see the printer on the network. Previously, I had used a parallel to USB on my computer and it works perfectly. Now, however, I must be able to connect to my Wi - Fi network. Could someone help me with this problem please?

  Thank you.

  If the card does not appear in the other location, there may be a way for you to fix the card. It is a common problem with the older 610N and more with the 615N. They develop joints of cold junction on the main processor. Given that the card does not work you have nothing to lose by trying the method. You must remove the card with the power turned off. Then, you will need to remove the beige back which is fixed by 2 torx screws. Then take the card without the back and place in a casserole in the oven with the chips upward and supported so that the bottom does not touch the pan. Now the most important part, you will need to use a very good oven and set the oven temperature to cook the card at 350F (177C) and when the oven is ready, take the pot with the card and place in the oven for 8 minutes. Remove and let cool for 10 minutes, put the part back on and place in the printer with the power, cross your fingers and turn on the printer and let it come to ready. Wait about 2 minutes and do the page setup again. I hope that you will get a second page with network parameters, generally of works about 80% of the time. Good luck.

• After installation, my computer does not detect my Laserjet 1536dbf network and I can't print

  I installed my printer on my home network. Now, my computer can not detect so I can't print.

  I noticed that the printer indicates a different IP address that the router assigns to him and which is visible on the router configuration Web page. Reset of the printer and my router has no effect.

  I had to reset my router a few days due to a failure in broadband. Could be the cause of the problem?

  It turns out that reset the router after the failure in broadband, the other day off the ethernet port to which the printer is conncected. It's strange because the previous resets did not do that.

  Thanks for your help.

• Color LaserJet CP1525 nw: question Laserjet CP1525nw reinstall

  10 Windows Installer did a number on this old printer (6 years). Had to uninstall and reinstall several times during the last months since Windows 10 and this week on resettlement (with the orig disc delivered with the printer and then tried to download online), Setup hangs at 99% for at least 10 minutes before failing and gives an error that says: it took too long to run install and I would need to shut down my computer and reinstall. However, when I use the line driver/software installs, it will give the same exact message SO he'll have installed a printer of HP General no name on my system that I can use with this printer EXCEPT it will print in grey/black levels with no choice to change color at all the.

  I try to install on a desktop HP Envy. Using the USB cable (not wireless installation) and these errors has occurred since the 10 Windows Installer.

  Thank you in advance!

  You can try the steps listed here?

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03275934

• HP Color LaserJet 4500N streaks questions...

  Thanks in advance for any help that you could provide.

  Recently, I took a HP 4500N and have problems with the color of the stripes.  I replaced all the toner and also installed a new transfer kit (C4196A) and a new fuser unit (C4197A) kit for the machine.  It is also replace the feed roller.  In addition to all this, I also opened the machine and cleaned (wipe with a damp towel) all internal areas.  When printing after all this, it seems still relatively the same (see pictures attached).

  For me, it seems that I need to clean one of the other rolls but do not know where in the machine, I need to look at the next.

  Thank you
  Greg

  Looking at the drum, which seems to be exactly the problem. I'll order a new. Thank you.

• LaserJet P2055DN - boot question

  This printer having problem when initialization and unable to come to the State "Ready". Keeps restart again and again but do not come to the State "Ready".

  Can certain boday help me solve this problem.

  Thank you.

  I finally fix my printer in repair shop. Just replace the chip in the CARTRIDGE. And who charged me only 150 /-in Pakistani rupees.

  Snapshot is attached to locate the chip in the cartridge.

• Network questions and caused by the Apple TV 4

  My apologies for the long post...

  I bought a new Apple TV 4 this week an upgrade to ATV3. The main reason for this is to get proper access to my subscription of Apple's music on my living room AV setup - it would have been nice to get just a small update on the ATV3 to work well with Apple music!

  In any case, the addition of this innocuous little device seems to have caused all sorts of questions about my home network.

  I have connected the ATV4 using ethernet to my Virgin Super Hub, made the simple configuration via iPad and has proceeded to explore - everything seemed fine. Even downloaded the speedtest excluding interest and who reported a healthy 90 + MB. Made the usual check for updates and this 9.0.1 installed.

  First of all, we noticed the following aspects with the ATV itself:

  1. During the operation, she would bring "no network connection.
  2. By looking at the network settings it shows connected Ethernet but had lost it's previously that would deal with DHCP and DNS details
  3. It does not recover
  4. Just physically remove the cable disconnected and reconnected would force it to find an address - done interesting a different each time. Other devices on the network tend to have the same address (as is usually the behavior, I expect), but he may then lose later
  5. In addition, when it is connected to the speed sometimes fall causing stuttering/buffering of the same Apple music / local libraries
  6. If the ATV4 is awakened from his "sleep" he also still not address
  7. I removed the Ethernet and tried the same thing with Wi - Fi - it presents a similar loss of address - so I conclude its not related to the transport

  I did the usual restart/re-Multi-Power of router, switches and access points - I have an Apple Time Machine (in switch mode + providing a WiFi access point second across the House), over a gigabit 8 ports switch with the Virgin cable router. In no case a network complicated and so far I've had NO problems with the internal network - before the addition of ATV4 we had several wired (Macs, PS4, PS3, Smart TV, home automation) and wireless (ATV3, Blu - ray, another PS3, MacBook, iPads, iPhones, etc.) ANY abnormal behavior of customers well. But still the problem persisted. I had to leave the investigation, but left the ATV on and connected via ethernet.

  Now, here's the next interesting issue. My son said that it could not connect to the WiFI network with his iPhone 6. The phone would see the ads these two WiFi networks, but on the selection or just would not get an address never (even with reboots, restorations, etc.), to the point where he thought the phone had a problem with the hardware (also proposed by the Apple Support). Other devices seemed (at this time) to connect OK, even more reboots to network equipment does not solve this problem. So iPad (already OK) my wife had the same symptoms. A little Google and look on this site of the updated support various complaints about the networks ATV4, slow speeds, etc. - and including an addition can cause the ATV4 hitting on questions to other devices that you try to use the same network. So I turned off the ATV4 and ' hey presto' the phone that don't would not connect worked immediately, iPad & other devices connect and can access the internet + LAN in quick as they did previously.

  Now, of course, this probably isn't a big problem for everyone (otherwise this forum would be full of only those complaints), but I can only conclude that the Apple TV 4 (9.0.1) is at fault. If I just keep the same and pop my old ATV3 instead I get NO such problems.

  That's all very boring, because I also bought a second ATV4 as a Christmas gift for one of my sons. Is it really £300 + in the sewers?

  The other people in this community, see some or all of these questions? Permanently or intermittently? Has anyone received all responses support who can help me? I will of course follow up with Apple myself.

  Now, of course, this probably isn't a big problem for everyone (otherwise this forum would be full of only those complaints), but I can only conclude that the Apple TV 4 (9.0.1) is at fault. If I just keep the same and pop my old ATV3 instead I get NO such problems.

  That's right, that is not a problem for the vast majority of users, in fact I'll go far as to say that I only saw one or two messages with 'Similar' issues. May I suggest you try in another place (maybe a friends or preferably to an Apple store), I'm inclined to think you will find it works perfectly, if it isn't taking it back for a replacement.

• HP 4101mfp Networked, question

  So I have a HP 4101mfp connected to my network and I have a computer that access.  The 4101mfp has the latest firmware (03.804.6) and is connected by LAN line.  The computer that accesses has installed the most recent driver (5.8.0.17508) and I chose the 'network' connection during installation.  It is also connected through the LAN line to the router as the printer.  Everything is fine and I can print when I have to.

  Now I fix usually issues when I see them in the event viewer on Windows 7 and I found a problem that arises.  Red error event ID 7023 who she is "HP network devices support ended with the following error: the specified module could not be found.  So looking at the autorun, I see that miss me a service file:

  HPSLPSVC is the entrance and the file "hpslpsvc64.dll".  I scanned my system and watched in the HP files that are created when you install the drivers; I can't locate this file.  Can someone direct me to where I can get this file?  Maybe it's somewhere in the installation zip files?  Or if anyone knows if the related service publish in case the Viewer is repairable?

  Thank you

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  I hope this helps!

• Designjet Z3200 Networking question

  I have 2 identical Z3200ps plotters. It runs like a champ, and the other would be if I could understand this last question... adding to my pc to be able to print over the network. I am able to do the plank drawing through i.p. on web page address, and I can even ping plotter. However, when I go to add through devices and printers... nothing. I tried it from a pc Windows 8 and Windows 7. He research and can't find anything. I replaced the trainer and still no go. I could even send a print of the web page of the tracer. Also sent one when you're connected via USB. Any help would be greatly appreciated.

  Thank you!!

  Don't know how or why, but I came this morning, plugged the network cable in the plotter, initialized, and in some sort the IP config had passed from manual back to DHCP and picked up a new address. I changed the config manual, keeping the new IP address. Decided that I would try once more to add the Tracker on the network. You know, the sonofagun worked. I had activated impression more than 9100 last week, thinking the same thing you Milo. But after I did it, there was no change. Maybe it was just to take the time to update? Who knows... but anyway his work and I appreciate all the help.

• Java networking question

  I have a web service that stores up to some contact information (name, surname, telephone number, etc.) in a JSONObject.  I have then convert this JSONObject to a byte [] and send it to my stream output and eventually to my BB application client.  My client can read the data from the input stream and JSONObject see no problem and display the results.

  I also want to send a contact (the problem) image with the JSONObject.  I don't think that I can store an image in a JSONObject and I can't send JSONObject and byte [] of the image in the same connection, because then the customer can't decipher what's what.

  My question is, how a send time the JSONObject and back to the BlackBerry image?  An image can be converted to bytes and stored in a JSONObject?  Any suggestions?

  Thank you!

  -J

  I think it's possible.

  Tried with org.json.me. Key point is to use Base64 to manage the image (also optimal for networking) string data

  See code:

  class Scr extends MainScreen {
      public Scr() {
          JSONObject o = new JSONObject();
          EncodedImage image1 = EncodedImage.getEncodedImageResource("image.jpg");
          add(new BitmapField(image1.getBitmap()));
          byte[] data1 = image1.getData();
  
          try {
              String data1Str = Base64OutputStream.encodeAsString(data1, 0, data1.length, false, false);
              o.put("image", data1Str);
          } catch (JSONException e) {
              e.printStackTrace();
          } catch (IOException e) {
              e.printStackTrace();
          }
  
          try {
              System.out.println(o.getString("image"));
          } catch (JSONException e1) {
              e1.printStackTrace();
          }
  
          byte[] data2 = null;
          try {
              String data2Str = o.getString("image");
              data2 = Base64InputStream.decode(data2Str);
          } catch (JSONException e) {
              e.printStackTrace();
          } catch (IOException e) {
              e.printStackTrace();
          }
          EncodedImage image2 = EncodedImage.createEncodedImage(data2, 0, -1);
          add(new BitmapField(image2.getBitmap()));
      }
  }
  

• Networking question in VMware Workstation / nested ESXi network configuration problem

  Hi guys,.

  I am trying to set up a virtual lab, I setup a domain, a vcenter server and up to 1 ESXi host controller.

  I am really struggling with the network aspect in establishing a vmnic for storing shared, please see the attached screenshots and a few questions:

  1. Is a vmnic a real network map? or vmnic correspond to "network adapters" that you put in place since the setting of your virtual machine?

  I followed a tutorial and implement 3 NICs on the ESXi host, in Bridge mode, I tried this in my configuration of vmworkstation and I lose the connection to my server vcenter to the ESXi host.

  See screenshot attached to how I configured my ESXi host, screenshot is called 'screenshot2esxihost network', I run got each of the maps defined on NAT network.

  

  See also the screenshot of how I have my configuration of network settings in my VMWare Workstation, screenshot is called "screenshot1. the tutorial does not show how it has its editor of the virtual network configuration, but it puts its ESXi host NICs in BRIDGED mode, and I'm guessing that you can set this time within the virtual network adapter. If someone could tell me what changes should I make in there and on the network cards in my ESXi host, which would be really useful.

  

  My domain controller, server ESXi hosts and vcenter are currently on the 192.168.86 range, which currently stood at NAT

  See also a screenshot from the vsphere client - I don't see a vmnic "vmnic0", my goal is to be able to add a "vmnic2" for a separate storage network.

  

  any help would be received with gratitude, I VCP510 review at the end of the month and really hope to be able to get my lab setup as soon as possible.

  The vmnic is the rising 'physical' of an ESXi host. So with the 3 network cards that you configured for the host in VMware Workstation you will see under "Network adapters" and you can use them to vSwitches in the section "network".

  André