410 a Photosmart premium: the HP Solutions. 2nd model different from the printer

Similar Questions

• Cannot copy from the surface of the glass. HP Photosmart Premium Fax all-in-One, model # C410a

  Hi people,

  I can't make a copy of the surface of the glass of the printer. Automatic advance works great, time to take the paper and print a copy. In the past, printing from glass was not a problem. The error message on the printer says "Document Feeder Jam. Reload document, then restart of work. " The problem is that there not be jammed. I raised the lid of the printer and checked the ink cartridges, checked the paper tray and open the access to the rear of the printer.  I have an HP Photosmart Premium Fax all-in-One, model # C410a. All accepted ideas. Right now, I'm ready to start with a hammer.

  Oops, I got typo in my link.  I have the fix above or you can click here.

• HP Photosmart Premium e than all-in One (C310a) no longer print wireless

  I have a Photosmart Premium e All in One (C310a) printer/Scanner and it stopped printing via wireless network - I don't think I've changed anything on the network.  There are the following symptoms:

  1 impressions sent via wireless just sit in the queue after some time and printing status indicates error - printing.

  2. we will analyze more wireless.

  3. If I turn it on to USB connection, it prints very well.

  4. She will print a test page when insiders from the printer menus.

  5. I have downloaded and run the doctor HP Print & Scan which reported no problem.

  I am running XP Home Premium (64-bit) on my computer if it is relevant.  I also completely uninstalled and reinstalled the printer, but that did not help.  Grateful for advice on the resolution of it.

  I finally fixed that!  My router provider was completely useless, when I rang them and just declare that they offer no support for port mapping...  However, it was not the router.  It turns out it was my internet security suite (McAfee), which had decided to start the Spooler SubSystem App from blocking. By chaning this setitng to allow outgoing connections that I solved the problem and the printer work again wireless.

  Thanks for the help and advice AlwaysNeon, I thought would post the solution although case someone each reports the same symptoms again.

• Photosmart C7280: the printer does not print

  I have a Photosmart printer and an HP Pavilion all on a PC running windows 8.1. Recently changed service broadband provider and have had printing problems since then. I have set up the Wifi and can produce a test print, I can also print HP troubleshooting, but impossible to print whatever it be held on PC, such as documents and pictures.  I get a message saying "send to printer", but nothing happens.

  I have tried setting up via a usb cable, still unable to print...  I uninstalled reinstalled the printer restarted by taking the plug from socket & crossed the HP step by step, guide, but no change.  The printer has accepted the new Wifi system & shows the logo of the Wifi on the small screen.  I even tried to print things via Adobe Photoshop, but still nothing.

  Any help would be welcome.

  Thank you

  Hello 643gs,

  Welcome to the HP Forums.

  I see you are having some problems printing via a wireless connection.

  I have a few steps we can try.

  Let's start from square one.  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Here is a link to the uninstaller (Windows 8).  We want to have all the software and drivers removed so that we can start fresh off.  Once the uninstall is complete, reboot the computer.

  When the computer is back on, click on the following link for the drivers and software HP Photosmart full feature.  Save this file on the desktop so that it creates a new icon.  Double-click the new icon and follow the installation instructions.  When you get to the connection options, move it to the printer and follow the next set of instructions.

  On the front panel of the printer, go to the Setup menu.  Once in the configuration of the menu display on the network menu and down to the restore default network settings option.  Once the network has been restored, make the wireless configuration wizard.

  When the wireless configuration wizard is complete, you should then be connected to the network and be able to see an IP address. Hover over to the computer and make the Wi - Fi connection and type the IP address that you received just from the printer.

  You should now be connected and be able to print from the computer.

  I would like to know if you have any questions or concerns.

  See you soon,.

• Photosmart 6510 "the printer could not connect to the server.

  Hi all.

  Just try to find this sorted hope someone can help.

  I am able to print irelessly of all our devices with no problems at all.

  However, when I click on the control panel applications he repeats me "the printer could not connect to the verification of the server of the internet connection and try again or enter a proxy address.

  I use an Imac with airport wifi router.

  Doing a search in the forums and on the manuals troble shooting pages, nothing seems to work.

  Thanks in advance.

  Let's define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• ink cartridges HP PHOTOSMART PREMIUM FAX ALL IN ONE C410A MAGENTA DO NOT PRINT

  I tried 2 new HP magenta ink in the printer and it's still not printing.  All other colors are displayed, what's the deal.

  Do the cleaning and alignment. Out of the printer head and clean it with soft cloth, helppppppppp

  Hi PaganC,

  I understand that you are unable to print with the magenta cartridge even after cleaning and aligning the print head.

  I suggest to use the following document to resolve the problem. Troubleshooting print quality problems

  If the problem persists, take a look at this video, you can find very useful. Hot water rinse printhead - HP ink printers of the series with removable printhead.

  I hope this helps.

• 410 HP Photosmart Premium a with fax

  printer error 0x610000f6 General

  The error code you provided is an indication for a Jam of transport in this printer. Please see the document located here for steps to help resolve the transport jam.

• Photosmart C309a: The printer does not print

  I am trying to print and it looks like it will print but blank paper comes out.  I have all new ink cartridges.  I tried to replace the cartridges, turn the machine and even unplugged. Any suggestion will be appreciated.

  Hello

  I don't know if you saw this post, but it seems the other problems of peoples in the sense of emptiness.

  Printing ink empty

  See if that helps, let me know how it goes.

  Thank you

• HP Photosmart Premium C410 will not scan

  Windows 7 operating system HP Photosmart C410 when I put a picture on the scanner face down and use the HP solution Center and click on SCAN, scan photo to file, the box that doesn't appear shows no preview and does not allow me to set up.  Everything it says to "prepare to analyze."  The printer is then his sweeping sounds and when he stops, the printer message says "Document Feeder Jam.  Reload document then restart of work. "  How can there be a jam?  I tried several times with the same result.

  Hello howdysmom.

  I understand that you are unable to scan a document using your Photosmart Premium C410. Please follow this document from HP on the paper jam, to ensure that there is no paper in your printer.

  Also, try a hard reset on your printer. Click here to complete this step. This printer must be in a direct wall, not a surge protector.

  Please send me your troubleshooting steps.

• HP Photosmart Premium all-in-One Printer - C309g dose it supports eprinting

  dose

  All-in-one printer, HP Photosmart Premium - C309g eprinting airprinter support

  Hello

  Great question, I have attached a link below that shows what printers support missions/ePrint AirPrint.  There is another option for the HP Photosmart Premium so depending on your model, which houses the ePrint and Biz.  There is more information on this subject on the ePrint link below.

  Good luck!

  http://h10025.www1.HP.com/ewfrf/WC/searchresults?tmp_product=HP+Photosmart+Premium+All-in-One+Printer+-+C309g & Product = 3793676 & tmp_qt = ePrint & CC = US & DLC = in & LC = in & Submit=.

  

• HP Photosmart C310a and HP Solution Center Windows 8

  HP Photosmart C310a and HP Solution PS_A10_07_C310_FSW - installed Full_Win_WW_140_408 Center. Print from Internet Explorer 10 preferences pages rise in Japanese or Chinese.  Works fine in Word.

  Windows 8 running on Ultra Intel Core i7 laptop.

  Not a printing problem, but a problem becomes the prefrences page if we can settle Dulpex or 'print page 1-2' can't read pages.

  Actually have two Ultras (wife and I), and both do exactly the same thing.

  How can I solve it please?

  Hi, dash,

  If you have this problem with the browser Internet Explorer 10 and not with any other application, then it would be some setting in the browser IE 10. Try printing from another browser (firefox or Chrome) and let me know if you have the same problem?

• Do not communicate the printer and the laptop

  I have a Samsung laptop and a printer Epson Workforce 630.  It is put in place for the WiFi,

  However, when I try to print nothing prints, the laptop on the screen of the device has a yellow triangle, and when I troubleshoot it says cannot find the Photosmart Premium 309 g - m.  I removed all HP printer programs, on my PC.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

• How Scan photos using the printer and save it in the Gallery of photos from the computer?

  Original title: scan photos

  How can I Scan photos to my printer and place then in my Gallery of photos in my computer?

  Hi Joseph,.

  Please let us know the make and model of the printer you have.

  The method of image digitization and its related settings differs from one printer to another. So, I suggest you consult articles guide you may have received with your printer when you bought. If you are unable to find all the details in the article of guide, it would be best to contact your Technical Support of the printer for assistance on this.

  You can publish all your queries related to Windows on Microsoft Community Forums and we will be happy to help you.

• Problem with the installation of the solution Center for a HP Photosmart Premium all-in-one printer - C309g

  Hi people,

  I searched many threads and found some tips to remedy this, tried and had no chance.

  I am running Windows 7.  All updates are underway.  When I bought the printer, I installed the software (on Windows 7 OS) from the disc and everything was fine.  Fast forward a year and Solution Center has stopped working.

  Uninstalled all HP software to reinstall.  I could only reinstall HP Update.  I was able to load the basic print and scan drivers, but not following any software, including solutions Center.  Installation stops abruptly after "install updates".

  I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.

  What can I do with my printer (HP Photosmart Premium all-in-One Printer - C309g)?

  Thank you

  Alex

   

  Screenshot of the update section:

  

  

• Unable to connect to the printer - HP photosmart premium c 410

  Macbook air OS x 10.9.5 using

  Printer and macbook show good wifi signal.

  Did the disconnect/reconnect the two devices and the comcast router.

  Check the "share printer on the network", on and outside.

  The printer works sometimes and at random.  Example: trying to print a Word document that has failed, but sometimes from one day to the next, the document printed.  Spookie!  But above all, the printer will not connect.

  Problem started after the two aircraft had been disconnected for a few days and move while some construction was conducted at the scene.

  Is there a setting that needs to be found and reset?  Could any dust, etc. of construction altering the router?  Please help, preferably with a simple solution.

  Thank you.

  arze1905

  Hey @arze1905 ,

  Thanks for joining us on the HP Forums today, hope you enjoy your time with us!

  If my name is Zac and I'll be your support agent to 1-1 for the same problem! I understand that you have recently moved the printer and the computer autour due construction and since the move has been random failures of printing and printing slow (like 12 hours later slow). Looking for help and I will do exactly that.

  So when I looked through hp.com I came across this "Slow printing" document that addresses the issue with the 10.9 Mavericks and other operating systems, and it seemed like the best place to start. So if you could please go through it and follow the steps and let me know how it goes it would be great! They are very descriptive and easy I promise you.

  Here is the link! Of printing to your printer HP are stuck in the print queue: v10.10 OS X Yosemite, OS X v10.9 Mavericks and v10.8 OS X Lion of mountain

  Get back to me and let me know how it all happens! Have a great day and wonderful / safe from holidays!