470 G1: WIN10 does not display HP 470 G1 AMD 8750 m------dGPU option does not work

Similar Questions

• AIO 600-1055: Win10 did not work & MS could not make it work. Reinstalled Win7 & now the DVD is not recognized

  Have HP AIO 600-1055 Desktop. "Upgraded" to Win10. Didn't work & MS could not make it work. Reinstalled Win7 and now DVD is not recognized

  Hello:

  See run the resolutions listed in the link below the job for you.

  https://support.Microsoft.com/en-us/KB/314060

  #3 or #5 usually work.

• ProBook 470 G3: Microphone does not work

  After updating HP built-in microphone (chip Conexant Audio) does not at all.

  How to go?

  Hey there! @nollip, thank you for joining the HP Forums!

  I understand that microphone on your laptop is not working after the update.

  Please update the audio driver at the bottom of the link.

  Version: 10.1.684.45
  Driver Audio link: ftp://ftp.hp.com/pub/softpaq/sp74001-74500/sp74370.exe

  Please let me know the results.

  See you soon!

• Re: Satellite A65-S1067 - display driver does not work

  As stated in my title, the display (ATI Radeon 7000 IGP) on my Toshiba laptop driver does not work and has not worked for quite a while.

  Whenever I try to play a game that is to install a game (like World of Warcraft or Civilization III) it does not work because it says that my display driver does not work.

  Can someone help me with this?

  Hello!

  You use the factory settings on your laptop computer or you have installed your own version of Windows?
  And have you tried to update the driver? I put t know what OS you use, but the Toshiba site, you can search for a new driver.
  http://www.CSD.Toshiba.com

  And have you tried to update the version of DirectX? You can find on the Microsoft Web site.

  Sorry, but at the moment I can t tell more.

  Good bye

• Back and forward buttons but does not, URL is not displayed, charging does not work. Windows xp.

  Back, forward, reload and stop also died in right click. Set the page lock also does not work, I guess because the URL is not displayed. This is the case since download FF4.

  Try running Firefox in questions to troubleshoot Firefox in Safe Mode. If it works properly in this configuration, then one of your modules is the culprit.

  The secure page lock symbol has been removed in Firefox 4.0 and replaced by the How do I know if my connection to a Web site is secure?. Unfortunately, thieves were able to build a web page that will display the lock symbol, even if this isn't a https:// site. Which could deceive a large number of users into thinking that they were on a secure site.

• Portege Z930 - display driver does not work properly

  Hello

  We have a Portege Z930 with Windows 7 64 bit in use where the Intel display driver seem to work fine.

  First problem is the slow presentation on screen - if we open a (simple JPG) photo and move the window, the frame window break during the move and showed very weird.

  Then, we have installed a U3.0 dynadock docking for the use of two external displays more. This method works even worse. To the docking station, we used the driver from the CD supplied in the delivery and connect to a USB 3.0 connector.

  On starting switching on 2 screens instead of internally for computer laptop screen does not work - and we use workaround of using an extended desktop on all 3 displays (2 external and internal display for laptop as the third).

  In Internet Explorer, it should turn off GPU Rendering and use Software Rendering rather because otherwise, we observed critical irregularities on the external screens (with 2 Windows Open the screen froze or could not display Windows Mobile). However the display isn't satisfactioning.

  We have tried 3 different versions of the recommended Driver Intel which is also offered by Toshiba to download; We loaded it is there and also 2 versions more (a more recent, one older) Intel directly.

  So, how can we get this working properly?

  Thanks in advance and best regards,
  N. Cochems

  More importantly. Make sure you have Service Pack 1 installed Win7. New laptops have problems running in win7 RTM (without service pack).

  It seems that Windows uses the standard VGA driver instead of the Intel driver. Uninstall all display drivers from Control Panel-> programs and features and then go to the Toshiba website and install the utility Intel Chipset then the Intel display driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new software v7.xx DisplayLink driver fixes several issues found in v6.xx drivers.

  Verify that the Intel drivers are installed properly in Device Manager.

• Display driver does not work for Satellite L750D

  Hi Admin, how are you?

  laptop: Satellite L750D/050 PSK36A-050011
  Video card:
  Dual AMD Radeon 6480 G + AMD Radeon HD 6470 M 1 GB graphics
  (3059 MB Total: 1.5 GB dedicated + 1523 MB memory shared memory)

  I just brought my laptop yesterday,
  I format and reinstall windows7 ultimate 32 bit, and I download the display driver amd from the toshiba Web site.
  It does not work, and I went to download from Web site of amd that the drive still does not work.

  Can u please help me and tell me how to install it?

  Please, I beg you. Thank you.

  Hello

  What do you exactly because it does not work?
  Have you chosen the right driver?

  Here's your laptop where you can download the driver:
  http://www.MyToshiba.com.au/support/computers/satellite/l750d/psk36a-050011/download?OS=24

  Could you please confirm that you have used the AMD v 8,836 display driver driver?

• Satellite 1110: Secondary display does not work

  I have a satellite 1110
  Connection of a monitor second - does not work
  The settings are correct in what, move your mouse off the screen of the laptop and he enters the secondary monitor - but this monitor is empty
  Tried all the normal things - control work? Yes etc.
  I'm running XP Professional could be corrupted or is it more likely to do with my laptop

  Please someone help - new monitor for Christmas - just can't make it work

  Thank you

  Hello Nick

  According to your description, you can't write that the second display doesn t work. Of course, you have activated the option called extend my Windows desktop on this monitor. In this case, you can remove all windows laptop for external monitor screen.

  If you work with more different windows on this way, your work will be more comfortable. I assume that you do want this and it will be interesting to know how you want to use the secondary display:
  -secondary display only
  -but both with the same point of view?

  Remove the scope option and use the FN + F5 key combination and choose display to use.

  Good bye

• HP Scanjet 5590: Scanjet 5590 & Win10 64-bit - install and scanning does not work

  1 install the latest official software for Scanjet 5590 stops in the Middle after the first component (software scanjet 5590) before TWAIN / Iris etc. Macromedia window remains opent "Please wait" but the 2nd part of the installation process does not start.

  2. no doubt as a result no scanninng. Before the scanner buttons not working do not (missing twain) and scan from the software installed launch the scanner (activate powersave); Opens the window of the software, but analysis does not start.

  Win10 64-bit; USB. HP CP1025nw the wireless is the other HP product installed. ASUS z97 MB, i7 - 4790 k / 16GB, SSD.

  I tried and does not work:

  -different, another USB port USB cable

  -new installation of 64-bit Win10

  -a lot of removing the software and driver (windows install cleaner, file removal, registry) and reinstall

  -HP support assistant/framework/scanning, printing doctor [result "don't install the driver" awhile, but obviously it is installed and the wizard fails to resintall it]

  Installation of the software in safe mode (after editing registry it is possible) all the complete component installs (scan software, iris, twain, etc.) but always the same questions: scanning does not work.

  Any idea or suggestion?

  OK, here's the solution that works for me:

  YouTube

  In brief

  -check out you the shape of the package files (winrar will be required)

  -HPZstub.exe (NOT run Setup.exe)

  problem solved...

  I went two hollow guidance package and remote session with support and got this link after my file submitted in support of the L2.

• Tecra A4: Display backlight does not work

  Hi all

  Thank you for taking the time to read this. I came across a dilemma. My sister laptop screen broke (baby) and it was far from always being in warranty and we had not assured him. So I bought a new screen for it and it mounted fine. When I turn on the laptop, I can hardly do anything on the screen as if the backlight does not work.

  I see that it is there, it's just very very dark. I thought this would be a problem with the inverter. So I bought a new one of those too, but alas, it still does not. I can do all things beautiful to display on an external monitor via the VGA port.

  Someone at - it ideas?

  Thank you once again

  Danh

  Hello

  I understand you want to save money, but especially help the technician is most recommended as repair by yourself.
  In any case, as mentioned, you should be sure that the cable has been connected in the right way.
  You must connect the LCD/FL cable to connector LCD/FLand connect the cable to connector HV HT. Place the module LCD, the FL inverter board in the correct position.

  Good luck!

• Equium A300D - update Toshiba ATI display driver does not work

  Hello

  Has anyone else found the Equium A300D PSAK2E Windows Vista 32 bit download Toshiba ATI display driver will not download center work? If you choose Run, download causes crash windows Explorer during installation and the upgrade fails, even to save and installation do not install it.

  I tried to get the TV out S-video port work. See the thread on the TV does not. I've tried everything. does anyone else have this problem that Toshiba are not aware of any problems with the S Video TV out not working only not on this machine.

  Thanks Vince

  I ve checked the download from Toshiba Europe site, and there is no problem with the download. The file is approximately 96 MB and I downloaded it for about 40 seconds.

  The question is: how you tried to install the display driver?

  Anyway, who knows how you use the S-Video option and what can be the problem. According to your announcement you didn t get answer from Toshiba about it. Am I right about that?
  To be honest I don't think that there is a problem. The fact is that how to use the cable S-Video with TV is the same for all models laptops.

  Can you please explain to us how you try to see the desktop on your TV with the S-video cable?

• The slide show feature does not work when I used my Apple TV new 4th gen. I have all the minimum requirements for Macbook and Macbook OSX the Airport express. The slide show starts and stops after that 7 photos are displayed on the TV. If I change the

  The slide show feature does not work when I used my Macbook with new Apple TV 4th gen. The slide show stops after that display 7 photos and display to select the options for the slide show is displayed on the screen. The selected interval was 5 seconds. If the interval is spent in 3 seconds the slide show would work for a time and then to display random images. Has worked with Apple on this issue Support Mike and he managed to reproduce the problem. Since I'm in the return period of 14 days for this product, I returned it to the Apple store

  Welcome to the Apple community.

  After returning, I'm not really clear on what your question.

• Thunderbolt 10 Windows display does not work

  Hello

  I'm trying to implement the following configuration:

  I have 2 Macs:

  • Mac Mini (late 2014, 2.6 GHz Intel Core i5;) Intel Iris 5100 1536 MB) with Windows 10 (Home) installed through Boot Camp
  • 27 "iMac (late 2013; 3.5 GHz Intel Core i7;) NVIDIA GeForce GTX 780 M 4 GB) installed with OS X El Capitan

  I want to use the iMac as a display for the Mac mini, but it seems that thunderbolt display does not work (I can not upgrade to Windows 10 by pressing Cmd + F2)

  Could you please help to solve this problem?

  Kind regards

  Dmitry

  Please see use of your iMac as a display with the target - Apple Support Display Mode and Thunderbolt Firmware Update 1.2: continues to reappear and ports Thunderbolt and the target Display Mode may not work - Apple Su... .

  If command-F2 does not work

  If your iMac won't go to the target Display Mode when you press Control-F2, check these things:

  • Make sure the iMac that you try to use it as a screen that supports target Display Mode.
  • Make sure you are pressing Control-F2 on the keyboard which is connected to the iMac to use as a screen.
  • In the keyboard system preferences, if the check box is enabled to use all F1, F2, keys etc. as standard features, changes of command-Fn-F2 key combination.
  • Make sure that your Mini DisplayPort or Thunderbolt cable is connected to both computers.
  • If you are currently connected to the iMac, you want to use as a screen, try to connect to return to the login window. Then again press Control-F2.
  • Some old keyboards Apple and third-party keyboards allow may not control-F2 to toggle display modes. In this case, use the keyboard that came with your iMac to activate / deactivate the target Display Mode.
  • If your iMac is currently started in Windows, it will not be in target display mode. Target display mode is not supported in Boot Camp.

• Put option on the page does not work in the Easy Print VI Panel, controls tabs are not displayed

  Found two problems with the screw of report generation:

  (1) in the Panel of VI feel easy (report generation) or the Documentation.vi, the layout options don't work (dug in the sub - VI and found that they are not connected to anything).

  (2) If you have the controls or the lights in a tab control and try to use the Easy Print VI Panel or Documentation.vi with the option to include controls in the report, they do not appear. The only indications/commands that appear are those that are displayed on all tabs (that is to say, to create a control and move it over the tab control so that it appears on every page).  There's a Subvi (Expand_control_ref_with_nested_controls.vi) which is called to handle the nested controls (IE, grapes, berries, etc...), but it should have a case to handle the controls tab.

  Hey Sajosie,

  Dig into the Sub - VI you are right in saying that the Options available to the user input is not connected to anything for most cases. However, in the case of failure to "Quick Print" Layout Options are used to change the layout of the report. In help for this VI, he mentions that this entry is ignored for the report "Standard reports" and "HTML" options However, it does mention that this ignorance of Layout Options is expected for the 'word' or 'Excel' reports.

  Especially regarding the controls and indicators in the report which appear on the tab controls, I can make a product suggestion to do this kind of design more compatible with the mere impression VI Panel façade or Documentation.

• Startup and display does not work well.

  When I start Windows XP it takes about 4 minutes to the icons appears.  They appear of normal size and the screen turns white and the size of the icons and programs and the internet are extra-large. I go into display properties and reconfigure and find his game on 8-bit!  After configuration back to normal display and restart or turn on again the same thing happens!

  Also, I tried to do a system restore and it does not work either. Please advise me on what to do. Thank you!

  Hi RhondaHeaven,

  I suspect that your display card drivers are corrupted. You have your cd/dvd drivers? If this is not the case, download your display drivers (you will get the model and make from Device Manager - click on start-> settings-> Control Panel-> system-> hardware-> device-> display adapter Manager).

  Click Start-> settings-> Control Panel-> system-> hardware-> Device Manager-> right click on your display-> Uninstall adapter.

  Uninstall display drivers Intel of add/remove programs.

  Restart your computer. Reinstall the drivers from the cd or downloaded driver.

  I hope this helps.