481409-002: display port using DVI adapter

Similar Questions

• When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  Yes it will be displayed.

• Dell U2414H and Display port to DVI cable

  Hello.

  Have a U2414H monitor I need to connect to a Dell T1700 purchased with a videocard of Nvidia K2000 added. I need to use the connector of the video card. 2 display ports will be for an another U2414H monitor and a HDMI TV for meetings. I have a Display port to DVI cable and I try to use it from the Dell U2414H monitor and am out of luck. I can't seen to find info if DP supports the U2414H monitors to DVI cables. Has anyone else got it to work? I tried the DVI port on the PC with HP monitors and they worked. Any ideas are greatly appreciated. Thanks in advance.

  Output DVI on VC > DP cable DVI > entry DP on monitor

  The U2414H has the following ports =.
  DP in
  CDM in
  DP on
  HDMI in
  HDMI in

  The K2000 has the following ports =.
  DVI - I DL
  DP
  DP

  A video card DVI port cannot convert to the DP/CDM monitor via a single cable. What you bought was designed at the downconvert a video card DP/CDM to a DVI monitor. You can buy a DVI to HDMI:
  Computer DVI K2000 graphics card on--> cable DVI to DVI--> converter --> HDMI to HDMI Cable--> monitor HDMI in

  -OR-

  K2000 DVI graphics card on--> of computer--> monitor HDMI DVI to HDMI Cable to

• Display Port Adapter

  43N9160 Display port to DVI adapter - what is an active adapter that could be used for AMD eyefinity?

  Thank you

  Lenovo do not sell active displayport to DVI adapter, as you pointed out is a liability, so it won't work with AMD eyefinity.

• U2415 Display Port DVI adapter - no Signal

  Hi - I have a new U2415 that I'm not getting a signal on when I plug it into my office with a Display Port to DVI.  This is an active adapter that I bought on Amazon.  I have the adapter plugged into the port Display Port, then the cable DVI to my PC.  When I try to "detect" to the monitor displays under Windows 7 64 bit I don't see it in there.  I have 3 other monitors connected to my PC using a videocard ATI Port Quad (ALL DVI) and I know that all ports operate as I went around.

  When I plug the monitor in my book of Mack using the Display port cable accompanying the monitor works fine.  I also know the works of DVI cable very well as I tried it on another monitor.

  I also tried a CDM/DVI with another card and it does not work.

  I also downloaded the software Dell Display Manager but it gives an error saying: he needs a Dell monitor supported.

  Any ideas on why the Display port/DVI does not work?  Can someone suggest any other ideas.  I like to keep my current quad DVI video card port as they are costly to change.

  Thank you very much

  A PC DVI video card out can no longer convert to a DP monitor using this adapter. This adapter is designed to do the opposite.
  "Portable active adapter connects a DisplayPort equipped computer laptop or desktop to a monitor or projector with DVI input.

  You need this configuration =
  PC DVI out video card--> DVI converter DP --> DP---> U2415 DP DP cable in

• Mini Display Port has completely stopped working

  So I bought a Mini Display Port to HDMI adapter and it has worked perfectly well for more than a month. That's until 3 days ago. Out of nowhere I plugged my HDMI into the adapter and the power led of the monitor turned on and after a few seconds of reading, "No Signal". I have to hold the power cord in the more odd angles to get even for the screens of mirror, and even in this case, the screen is static at 80%. I looked online and tried every single tip or solution I've seen without success. All my HDMI cords are fully functional as I tried each one with my PS4 and works perfectly, so this isn't the issue. I've never had problems like this with any other Apple computer. Probably because no other computer using mini display ONLY ports. If anyone has had this problem and found a solution please let me know, if I can try to get this working. I have a MacBook Pro 15 in. mid-2012 with the processor i7 under OS X 10.8.5

  blmller2 wrote:

  I have to hold the power cord in the more odd angles to get even for the screens of mirror, and even in this case, the screen is static at 80%.

  This suggests a possible problem with the cord.  I would like to make an appointment with an Apple store genius bar and I tested the unit and the power cord.

  Ciao.

• Dell Nvidia Quadro 600 reference - adapter provided by Dell dongle (display port > DVI) is missing entries

  A puzzle - DP > DVI adapter dongle supplied with my refurb Precision T3500 is absent from the entries on the side of DVI. [Both the bag of dongle and the dongle have labels with "DP/N 023NVR" and "CN-023NVR-48570-22M-039X-A00"]

  The card is Nvidia Quadro 600 Dell w / 1 DVI port and 1 DP.

  I want to go to DP to VGA *... so I need a second adapter grafted on the dongle from Dell.

  Missing entries are above and below the long horizontal (spade) of entry. All my DVI > VGA adapters have 2 tiny over the shovel and 2 pins below.

  The DVI port on the card fits those 4 pins.

  The dongle does not work.

  Can I just use the hot pin (heat a PIN and create holes) approach... or DVI use these 4 connections?

  If the latter, why NOT the adapter address these connections?

  __________

  * Yes, I keep autour monitors until they die - a strategy to continue to pay the mortgage

  If you have Display Port, then you can get a Display port to VGA.

  But they tend to be expensive sometimes more expensive than another monitor that is DVI or VGA vs HDMI

• I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that?  Can I use an adapter?  If yes should which adapter I?

  I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that? Any recommendations? Can I use an adapter?  If yes should which adapter I?

  You can use any DVI monitor DVI port directly or have any VGA monitor with the power that you adapter. A HDMI monitor might work with an adapter DVI to HDMI in a pinch, but HDMI tends to be more fickle.

• Using DVI instead of VGA on the Port Replicator - Tecra A9

  I have a port replicator toshiba that I use with my laptop Tecra A9, currently I have a vga cable to run the external monitor, but I prefer to use DVI instead, but I can't make it work.

  Is there a setting somewhere that I have to activate? or should it work?

  See you soon

  Ash.

  Hello

  As much as I know there nothing that you must set for the use of the DVI port. The question is how you use it. Using a DVI - VGA adapter?

• P2415Q - no display on DVI, HDMI. No menu. Worked perfectly for a month on the display port

  Line of reason: Dell P2415Q. After a month, works perfectly on the display port, no display on screen Display Port or HDMI, no response to the menu buttons, backlight and power ON but no picture on the screen.
  
  

  Description of the problem
  

  The monitor worked out of the box for a month using the mini display port display port cable supplied with the monitor, which was plugged into my XFX 7970 and 7950 graphics cards. It supports 4K at 60 Hz and has been exceptional for photos, videos and games. Wednesday, the monitor no longer works, no picture or menu is displayed on the monitor. I plugged my old monitor to help diagnose via DVI graphics card even. When I press the power button on the Dell P2415Q monitor, the power LED lights up and the computer detects the monitor (as shown in the menu of the windows screen resolution). He defines as a secondary display but the screen remains black, I see the light power and backlight is turned on. No power save mode popup doesn't appear on the monitor, when I press the buttons of the menu there is no response from the screen, it stays black. I repeated with an HDMI cable, the same problem occurs without intervention or image. I repeated and disabled crossfire (which allows graphics cards to run independently) and tried the second graphics card without response. I tried the HDMI cable I used on my old LG monitor, it works well. I tried to connect a laptop on HDMI to the monitor too, no response from the monitor. I've exhausted all the tests I can think, I guess I'll have to return to the screen for repair or replacement under warranty. A question to the community - and dell rep is there anything else I can try / to make this work? 

  Monitor / computer details
  

  Monitoring of service tag:
  Computer: Non-Dell, build self about 2 years ago. Ivy Bridge i5, motherboard Gigabyte Sniper, 16 GB RAM, XFX 7970 GPU and XFGX 7950 GPU crossfire, 256 GB SSD, Corsair AX 860W (860W on independent 12V rails) supply power. Windows 7, 64-bit. (D2342 LG secondary monitor).
  Operating system: Windows 7, 64 bit.
  Graphics card: XFX 7950 XFX in Crossfire and 7970 (tested separately, product monitor fault at a time).
  Video card driver: 14.12 AMD driver Catalyst (restored to the old driver, always due to lack of product monitor).
  Video card output ports: tested with miniDP and HDMI on both cards, with crossfire enabled and disabled. Monitor product always loopholes.
  Cable video card: miniDP to DP cable supplied with the monitor. HDMI, tested with spare monitor to confirm it works correctly.
  Monitor Menu button: Inadmissible, what power is enabled on the computer detects the Dell P2415Q monitor, the backlight lights up but no image appears on the screen. By pressing the menu buttons produces no result - menu does not appear on the screen. Power LED is lit.
  Monitor purchase: purchased from Overclockers.co.uk March 2015.

  * Turn off the monitor
  * Disconnect all cables from the screen, including the power cable
  * Press the power monitor in pendant button 15 seconds
  * Reconnect monitor cables, then repeat the test. If still no go, your only option is to get exchanged by buying warranty
  * But first serial number must be transferred on your behalf using this form

• Connection to a TV with HDMI output with a Dual-Link DVI adapter

  I have two monitors connected to my MacPro late 2013, an HDMI port and the other on the Minidisplay port (with a Mini DisplayPort to DVI adapter). Then I have a third monitor used for dubbing tracks, (22 in.) connected to an another mini display port with a Mini DisplayPort to Dual-Link DVI. Now, I don't want to connect to the Dual-Link DVI adapter a led TV 40 "in replacement of the monitor 22 '', so that I can make the tracks of dubbing in a better way. But the led TV has a HDMI port. The question is: can I connect the TV led to the Dual-Link DVI adapter, simply using an adapter DVI to HDMI? It work?

  Not used that exact configuration but should work.

  See here to ensure that you do not overload a single BUS:

  Use multiple screens with your Mac Pro (end 2013) - Apple Support

  Al

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• Impossible to get a maximum resolution of 2560 x 1600 on external monitor using DVI with Optimus video T420s

  Hello

  I have a T420s with Nvidia Optimus graphics card. I also have the ThinkPad Mini Dock Plus Series 3.

  When I tried to drive an external monitor via DVI, I can't get the full resolution of 2560 x 1600.

  I searched the forums and found several threads expressing problems with the implementation of the resolution of 2560 x 1600 per display port. Engineering even issued a new nvidia driver to solve problems. (http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-Unable-to-get-max-resolution-of-2560x1...

  I uninstalled my intel/nvidia drivers but also installed the latest lenovo driver according to the instructions on the previous post and I still can't get the full resolution of 2560 x 1600 on the DVI ports of the docking station. I tried two DVI ports on the docking station, and it still does not work. I tried enabling Optimus, discreet mode mode, etc... Nothing helps.

  However, if I try to drive the external monitor via the display of the docking port, I can get the complete resolution of 2560 x 1600.

  Anyone have any suggestions on how to fix this so I can use the DVI ports on the docking station?

  Thank you very much for the help!

  dvi on the dock port is single link dvi and not dual link dvi, as such, it supports WQXGA or WQHD resolution.

  In order to use the resolution WQXGA resolution, you must use the displayport, if you monitor is not a displayport then you must use an active displayport to DVI.

• No sound on Display port

  I have connected my T500 to a LCD TV using the display port adapter and HDMI to HDMI cable. Picture is fine, but his fate from the top of the tower only. How can I get sound through the TV please?

  Roy

  The current view port does not sound, video only. It is a hardware limitation.

• The EliteBook 2540p display port sound support

  Hello

  I have here 2540p and I want to use the display port to connect my laptop to my HDTV via HDMI. I saw that there is an 'adapter DisplayPort to HDMI (BP937AA)' to this end.

  I just want to know if this adapter supports voice as well or is it just for video transfer?

  Thank you

  Merlin

  Hello

  Please visually check to see, you need a double DP mode for sound and video. Dual mode DP should have two plus signs next to him.

  I hope this helps.