Similar Questions

• Update of security for sql server sp3 KB94981 fails with error 2B 33

  Each update for SQL Server 2005 on my computer Vista Home Premuim fails. The most recent example is:

  Update of security for sql server sp3 KB94981 fails with error 2B 33

  for SP2, it was

  Security for sql server sp2 KB960089 update fails with error 6AA

  Other updates have been ad are successful, although I found out recently that it is the recovery disc option to create under maintenance contract. I fdound the recdisk.exe file, but running it does nothing.

  Mike

  Maybe check this forum:

  SQL Installation of Server & upgrade
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  TaurArian [MVP] 2005-2010 - Update Services

• VMware Update Manager - Setup failed with an unknown error. vCenter credentials could not be validated

  Hi all

  I have my getting the error next message when I try to install VUM.

  VMware Update Manager - Setup failed with an unknown error. vCenter credentials could not be validated

  Help, please.

  Hi John,.

  Please follow the link below.

  http://www.virtualmvp.com/VMware-Update-Manager-Setup-failed-with-an-unknown-error-vCenter-credentials-could-not-be-validated/

  Thank you

  Venance

• Remote access Windows Server 2012 through internet with desktop connection

  Summer messing about with it for days and don't get no love.

  Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

  Tried all these steps found in this promising and useful article:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.

  2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

  3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

  4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

  5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

  6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

  But the result of the message is always the typical:

  (1) remote access to the server is not enabled.

  > But this is not true, that I am capable of the DRC at home on the server machine.

  (2) computer remote is not off.

  > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

  (3) the remote computer is not available on the network.

  > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

  So... what to do, what to do...

  The wifi booster is a problem?

  Connects to the Data Center edition a problem?

  What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

  Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

  Thanks for any input.

  / Markus

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• VMWare Server 2 into conflict with Microsoft Virtual PC 2007

  I use Windows Vista x 64, when I have a virtual VMWare Server 2.0 open, and then start upward a Microsoft Virtual PC 2007 Virtual Machine, VMWare Machine will be output/die. If I already have a MS VPC 2007 open machine, then when I try to start a VMWare VM, I get the following message:

  
  Unable to connect to the MKS: there is no VMware process running for the C:\Users\Rusty\Documents\VMWare Machines\Ubuntu\Ubuntu.vmx configuration file virtual
  Either run "C:\Program Files (x 86) \VMware\VMware Server\x64\vmware-vmx.exe C:\Users\Rusty\Documents\VMWare virtual Machines\Ubuntu\Ubuntu.vmx" manually on the server.
  or save the configuration file.
  

  It is likely that VPC 2007 leaves the CPU in operation VMX VMware Server prevents to alternate between legacy and long mode.  Unfortunately, this switch is required for the majority of host/guest under VMware Server 2 configurations.

  I don't know if it is possible to disable VT - x in VPC 2007 support, but if this is the case, maybe it's a work around for this problem.

• P2V failed with RHEL5 and standalone converter 5.0

  Hello

  I'm p2v a RHEL 5 stand-alone Converter 5.0 physical physical server. The conversion will work fine until it reaches 95% and it bomb errors below. I tried several times and it has always failed to 95% with the same mistakes.

  =======

  FAILED: An error occurred during conversion: "/usr/lib/vmware-converter/copyFileSystem.sh sshClient-/ usr/lib/vmware-converter/ssh - root - host 10.0.0.64 - port 22 user - sourceMountPoint /-targetMountPoint/mnt/p2v-src-root / sshConfigFile--/usr/lib/vmware-converter/ssh.conf--sourceTarOption--rare ' failed. Return code: 2; message: / usr/lib/vmware-converter/ssh - z f /usr/lib/vmware-converter/ssh.conf [email protected] Pei 22 "tar - one-file-system - sparse-C / / CF-. » | tar - digital-owner/mnt/p2v-src-root - C / y - xf - tar:. / tmp/.font-unix/fs7100: socket ignored tar: ./tmp/keyring-YYWlLJ/socket: socket ignored tar: ./tmp/keyring-9uz5dz/socket: socket ignored tar:. / tmp/mapping-root: socket ignored tar:. / tmp/mapping-chris: socket ignored tar:. / var/log/memcached.log: be a member of invalid rare archives:. / var/log/memcached.log: file changed as we read tar: ./var/lib/log_daemon: socket ignored tar: ./var/named/chroot/var/run/dbus/system_bus_socket: socket ignored tar: ./var/run/dbus/system_bus_socket: socket ignored tar: ./var/run/heartbeat / register: socket ignored tar: ./var/run/cman_admin: socket ignored tar: ./var/run/audispd_events: socket ignored tar:. / var/run/acpid.socket: socket ignored tar:. / var/run/clumond.sock: socket ignored tar:. / var/run/pcscd.comm: socket ignored tar: ./var/run/sdp: socket ignored tar: ./var/run/cman_client: socket ignored tar: ./var/run/avahi-daemon/socket: socket ignored tar: ./var/run/saslauthd/mux: socket ignored tar:. / var/run/cluster/rgmanager.sk: socket ignored tar:. / var/run/cluster/ccsd.sock: socket ignored tar:. / var/run/cups/cups.sock: socket ignored tar:
  Previous error messages error output delay

  ===========

  10.0.0.64 is the source IP address of the physical machine. I have other physical servers on the network with the same configuration or similar, I have no problem with their conversion.

  Anyone know what is happening here? I checked the configuration of sshd source machine, everything looks ok Protocol 2 only.

  I have attached the log converter with more information assistance.

  Thank you

  S

  HM, looking more carefully at the newspaper these lines are strange:

  --> tar:. / var/log/memcached.log: invalid rare archives members

  --> tar:. / var/log/memcached.log: file changed as we read it

  I do not have this file in my RHEL5, but my guess is tar fails because of this. Other messages of tar are ignoring sockets unix which is not a problem. So, do you have idea what this file is, it is currently in use, can you stop the creative process or just restart with no logging at the moment of conversion?

• VMware converter 5.5 failed with the error failed to partition the disk of destination

  I tried to convert the centos linux server physical to virtual. However, I received an error message at 1% as below,

  Error: Impossible to partition the disk of destination.

  FAILED: an error occurred during conversion: "CalculateGPTPartitionLocations failed!"

  
  

  Conversion of GPT partition is available vcenter converter 5.1 and higher, so the GPT partition on the source server will not be a problem.

  Tried several ways as the storage of data changing but still receive the same error message.

  Anyone encounter this before?

  Hello

  Unfortunately there is a bug with Linux P2V Converter when the destination drive is greater than 2 TB (is not whether TPG, it's size). Sorry for the inconvenience.

  The solution would be to reduce the volumes instead of destination and/or their distributed on multiple disks. Another solution would be to leave unchecked high-volume and clone them manually after the conversion.

  Another misfortune is that these workaround solutions are not possible in your case - the root volume occupies approximately 4.3 TB, and the two 'start-up' and '-' are needed to perform a conversion with the reconfiguration.

  The options I can think of are:

  -make a manual P2V, i.e. to create the destination (with partitions, logical volumes and base) computer created and formatted, clone the data (for example the converter uses tar via ssh) and manually configure the virtual machine. The final step is, fixing/etc/fstab, installation of GRUB and rebuild the initrd image

  -install new and copy data

  -Optionally divides the volume of root on the source machine if possible and then convert it. For example, to add a new drive temporarily and move some data so that all volumes become smaller than 2 TB.

  Kind regards

  Plamen

• P2V fails with "error: an error occurred during the reconfiguration.

  Hi, we're starting everything just to P2V of our servers and start easy (I thought) qith our WSUS server. Every time I start the job fails on 98% with the error "error: an error occurred during the reconfiguration. I tried to re-boot, I tried to tell the wizard not to include a disk which is compressed. and I tried making minimal changes to the settings all with the same error...

  I don't know what to try next...

  I have attached the diagnostic logs in the hope that some kind soul can point me in the right direction...

  Thank you very much

  Matt

  Have you tried to remove the/3 GB switch to the boot.ini file?

• EA4500 FTP server remote access fails with active firewall

  I tried to access my drive connected to the USB port of the EA4500 remotely and it didn't until I disabled the firewall SPI IPv4/IPv6 options. If anyone else noticed that? Surely, the firewall must not block the own FTP server on the router!

  P.S. A friend with an EA3500 had the same problem.

  After the reset, all you need to do is to activate the FTP and uncheck the "block Internet applications anonymous" and it will work.

  Speaking from my own experience, it you start to turn things market... and offshore and on... something is finally going to get messed up in the router and ask you to do a hard reset.

• Cannot install the update on server 2012R2 Manager - fails with Visual Studio 2005 error.

  I searched google, tried everything I can find online and you simply cannot install Update Manager on the server 2012R2.

  

  Yes, .NET 3.5 and 4.5 are installed. Am I missing something here?

  

  Extract you the vCenter all server, or that the file Update Manager installation image? If you check out the picture of the installation, please do and launch the installation of the update from the appropriate subdirectory Manager.

  André

• Windows 8 upgrade fails with BSOD - system Thread Exception no Handelled (aswndisflt.sys)

  I'm trying to upgrade to Win 7 ultimate SP 1 x 64 to Win 8 pro.

  "Getting Ready" reached 100%, reboot the laptop and then during windows start screen BSOD appears saying "System Thread Exception not Handelled.

  Happened 2 times, the upgrade of the restorations for Win 7

  BlueScreenView said "caused by the pilot - . Ntoskrnl.exe "" "

  My dump files:

  Empty 1

  Dump 2

  Yes, I realized that after I posted the question. The BSOD declares a different file name (aswndisflt.sys) which is connected to avast. Already deleted and the upgrade is now beyond the point where it crashed earlier.

  Thanks for your comments though

• Remote assistance with vWorkspace 8.0 MR1 on a Windows Server 2012 R2 with Windows 7 Enterprise VDI (RDP8)

  We have a new VDI environment with the new Version of v 8.0 MR1 Workspace and real fixes. The connection Broker and the Hyper-V hosts running on Windows Server 2012 R2 Standard with real fixes. The VDI Clients are configured with Windows 7 Enterprise and RDP8. Unfortunately, we are not able to use by the broker for connections Remote Assistance?  We received the Error Message:

  The following error occurred during the occultation session 2 on the server...

  This function is not supported on this system. (120)

  I found the link: http://documents.software.dell.com/doc78042 or

  http://documents.software.Dell.com/DOC145926

  But this article has no recommendation for Windows Server R2 Standard 2012

  Any help, I would be grateful.

  THX in advance

  Thomas

  This question is not met at the time of the request

  I created a Blog post to allow other servers to 2012r2 2012r2 of remote assistance.

  However, it is not possible to use 2012r2 to help a win7 server remotely. It is simply not supported by MS and there is nothing we can do.

  If you can create a server 2008r2 to run the Management Console, you will be able to assist distance Win7 VDIs from here.

• Windows Server 2012 domain controller who fails to configure updates, coming back from changes.

  Hello

  I have a domain controller Windows Server 2012 which fails to configure updates. Each reboot it will say its configuration is updated, then in case of failure and Reverie. I can't find out what it is.

  I checked WindowsUpdate.log the only mistake I see there:

  2015 03-22 1000 1160 installation 09:36:29:735 caveat: SelfUpdate is in an error state

  Historical update check indicates a recent update that does not KB2770816:

  

  Download this update and install use autonomous to update manually the results of Setup in a message saying that the update is already installed (although windows search for the update in the updates installed appears without any results)

  I tried to launch the Windows update troubleshooting tool, that said he fixed a point, but after a reboot, I get always this error and now a new, every 20 seconds, I if I get this annoying modal popup saying that windows cannot check the updates even if it seems it can:

  

  Someone at - he counsel on how to locate the reason for the failure of the configuration of updates, perhaps, a log file will be useful information.

  Thank you.

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• RedHat P2V failed 99% - Grub problem

  I seem to have a problem (hot-clone), conversion of a RedHat ES 3 box to our virtual machine environment using the stand-alone converter.

  I constantly receive 99% conversion how I get: error: impossible to reconfigure the virtual target computer.

  Read the newspaper, I noticed there seems to be a problem with GRUB?

  Newspapers:

  2009-07-20 10:31:48.404 "task-1' 2956422032 info . GrubInstaller::InstallGrub: / dev/sda (hd0) is in the target VM

  2009-07-20 10:31:48.405 "task-1' 2956422032 talkative . LD_LIBRARY_PATH = / usr/lib /.

  VMware converter

  2009-07-20 10:31:48.405 "task-1' 2956422032 talkative . PATH = / bin: / sbin: / usr/bin: / usr/sbin

  2009-07-20 10:31:48.405 "task-1' 2956422032 talkative . Call /usr/lib/vmware-converter/installGrub.sh with the following arguments:

  2009-07-20 10:31:48.405 "task-1' verbose 2956422032 args [0]: / mnt/p2v-src-root".

  2009-07-20 10:31:48.405 "task-1' verbose 2956422032 args [1]: /usr/lib/vmware-converter/updateGrub.sh.

  2009-07-20 10:31:48.405 "task-1' verbose 2956422032 args [2]: /tmp/device.map.

  2009-07-20 10:31:48.405 "task-1' verbose 2956422032 args [3]: (hd0) '.

  2009-07-20 10:31:48.405 "task-1' verbose 2956422032 args [4]: (hd0, 0)".

  2009-07-20 10:31:50.416 "task-1' 2956422032 talkative . Return code of command: 0; result string:

  GRUB 0.93 version (640K lower / 3072K upper memory)

  [Minimal BASH- like line editing is supported.  For the first word, TAB

  lists possible command completions.  Anywhere else TAB lists the possible

  finishes of a device/filename].

  grub & gt; root (hd0, 0)

  Filesystem type is ext2fs, partition type 0 x 83

  grub & gt; Setup (hd0)

  Checking if ' / boot/grub/stage1 "not exist...

  Check if "/ grub/stage1" not exist...

  Error 15: File not found

  grub & gt;

  2009-07-20 10:31:50.417 "task-1' error 2956422032 . GrubInstaller::InstallGrub: /usr/lib/vmware-converter/installGrub.sh failed with return code: 0 and message:

  GRUB 0.93 version (640K lower / 3072K upper memory)

  [Minimal BASH- like line editing is supported.  For the first word, TAB

  lists possible command completions.  Anywhere else TAB lists the possible

  finishes of a device/filename].

  grub & gt; root (hd0, 0)

  Filesystem type is ext2fs, partition type 0 x 83

  grub & gt; Setup (hd0)

  Checking if ' / boot/grub/stage1 "not exist...

  Check if "/ grub/stage1" not exist...

  Error 15: File not found

  Reconfig failed with error GrubInstaller::InstallGrub: /usr/lib/vmware-converter/installGrub.sh failed with return code: 0 and message:

  Has anyone encountered this problem?

  It is perfectly safe.  Others have used this workaround before.

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• Unable to connect to EMS on Exchange Server 2012 2013

  Hello

  As soon as I try to open the EMS on my server it tries to connect, but fails eventually. Below is the error indicating a PSSessionOpenFailed. He made several attempts until he says... "Unable to connect to an Exchange Server in the current site. Enter the FULL domain name server where you want to connect. : __ »

  It tries to connect to the server is the local server running the EMS on. Not sure why it cannot connect because it is on this server.

  VERBOSE: Server.domain.com connection.
  New-PSSession: [server.domain.com] connection to the server remote server.domain.com failed with the following
  error message: [ClientAccessServer=ALL-SVR1,BackEndServer=all-svr1.alliance.com,RequestId=550fd6eb-494c-4691-a1aa-291d
  af8dc91e, TimeStamp = 15/02/2016-15:52:55] [FailureCategory = coffee-SecureChannelFailure] for more information, see the
  about_Remote_Troubleshooting help topic.
  On line: 1 char: 1
  + New-PSSession - ConnectionURI "$connectionUri" - ConfigurationName Microsoft.Excha...
  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  + CategoryInfo: OpenError: (System.Manageme... RemoteRunspace: RemoteRunspace) [new-PSSession], PSRemotin
  gTransportException
  + FullyQualifiedErrorId: PSSessionOpenFailed,-2144108477

  Hello

  Your Question is beyond the scope of this community.

  Kindly forward your Question in the TechNet Forums of Exchange Server.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  TechNet Server forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.