5 d III cinema DNG import does not correctly

Similar Questions

• Audio only importing does not correctly - tried everything offered - still does not

  So, I imported the video 6 or so in first CS5.5 and listened. The audio is screwed up and stops randomly at half way through.

  Now, I had this situation before too with an MP4. The fix online was to rename it with the MOV extension and lock/read-only file, and it worked.

  This time, however, the file already is a MOV.

  I tried locking and its import - did not work.

  I tried renaming MP4, locking, and import - still same results.

  I tried to erase the cache media, several times - did not work.

  I tried to import other project - did not work.

  I even tried to CONVERT in Media Encoder to aac. Still does not work.

  What now?

  We used T5is of Canon DSLR to take all of our images. They are MOV files, and we were switch between modes of 1280x720@60 and 1920x1080@30 fps.

  p.s. I finally got around the issue by extracting the audio into mp3 files using the free version of AoA Audio extractor. This does NOT, however, resolve the bug, but it was urgent.

• Transcoded files import does not correctly.

  I'm new to first (from FCPX) and I tried to import a video file for the past hours. I can't rotate.

  1. the files in question are files .mov 720 p 422 AppleProRes, 8track on 48 k audio sampling, transcoding of the r3d files (red cine-x if it is important).
  2. the files play fine as stand-alones, in my Quicktime Player.
  3. they also import and play well in FCPX.
  4. I am able to import songs audio and other films done in Premiere Pro. They all play very well.
  5. when I try to import my transcoded files, the image seems to matter very well, but audio is this horrible static noise maxed-out on all channels.
  6. in another transcoded video, rather than the audio maxed out, missing audio channels and the channels that exist are extremely heavy and highly distorted.
  

  7 I tried to re-transcode to HDV, but I get the same audio distortion when I import to first.

  8 I tried to play around with different settings of the sequence, and I also tried corresponding to the sequence of the element in question.
  

  9. I tried to import my raw r3d files, but the first does not allow them to import. As I read that the first is able to read r3d, I reinstall my copy of first.

  
  
  

  that linear pcm should work. Apple lossless should be helped first, then you can try this. aac and mpeg4 codecs are too poor quality.  If you export a stereo or mono channel pcm file does still have problems in first? You can also tell creation using only some tracks/channels to maybe see if has a problem with some of them. tray, right-click and choose Edit, audio channels, or of the right timeline click on a clip and choose audio channels.  You can also split channel track the location of the project, when you change channels, it can say 8 mono tracks.

• . Video AVI import does not correctly. Imports audio only.

  System: windows vista 64-bit

  Type of project: whatever the new draft standard is to the start screen

  Problem: I import files video .avi and they import audio only. It does not allow me to slide into the slot of the video on the calendar, and it only shows the speaker symbol in the media management area. This is the kind of funny. Previously, I used these files in another session June-July 2009, and they worked fine then. I'm lost and need help! (PLEASE!)

  Perplexed, like a fool

  If you look at the CODEC, it's Xvid version open source DivX, just as I suspected. These almost never work forward. The best workflow is to go before the Xvid compression (these are strongly compressed, lose a ton of data and quality), or to convert them to DV - AVI Type II with 16-bit 48 kHz PCM/WAV Audio files. I use DigitalMedia converter, but it is a shareware. Many users singing the praises of the Prism free to do the conversions. I've never used, but many here have and give it a very high rating.

  Note: no conversion program cannot recover this loss of data and quality. He is lost and gone forever. That's why my first option was to return before this compression is applied. However, conversion will produce files that can be modified both video and Audio.

  Good luck

  Hunt

  [Edit] do know not why/how they worked before. Usually, with the Xvid or DivX CODEC, you will get an error cannot import, or will get Audio or video only. I was never able to change any Xvid or DivX files in pre or PrPro - never, even once. I simply convert, if the client is unable to obtain the original source files, and I have even a diagram of loss of quality to show them how the film will look - not very good, IMHO. I make them sign on this loss of quality, before you start.

  Post edited by: Bill Hunt - added [change]

• video fps 1080 p 60 import does not correctly

  So I try to get a 1080 p 60 fps video in first to change, but I'm running into some problems when importing. I'll preface this by saying that I know that video is indeed works very well as I open it in VLC and it renders perfectly in 60 fps. The project is also in the correct parameters; 1080 p, 60 fps.

  Here is where the problem starts well; I try to import the .mp4 and first he plays only audio. I read somewhere to try to change the extension to .mp4 to .mov, and it worked partially. The video imported with audio, 1080 p, good quality, BUT it was at 10 frames per second. I have opened the same .mov file in VLC and it plays at 60 fps, 1080 p, its fine.

  So, first is messing up somewhere and I'm trying to find a way so that it can correctly, read my bloody video at 60 fps. If I check the properties of the two mp4 files, and when I change it to .mov, said 60 fps 1080 p etc but first just will not import correctly.

  I appreciate all the comments, hoping to get this figured out! Thank you!

  Performance of Premiere Pro CS6 version 6.0.0

  I suspect that it may be variable because the files have different rates, even if I specify for the program records at 60 fps.

  BBoss salvation,

  You have images image variable rate on your hands. This isn't 60 fps. You need to transcode these images in order to interfere in Premiere Pro.

  Thank you

  Kevin

• Videos don't import does not correctly

  Hi, as the title explains the problem is simple.

  I am running the latest version of first Pro CC and my videos are not only import correctly, they play outside creation very well, but when I import into first they are black, about 1/20th the length, and have only audio (which seems ot be since the beginning of the video).
  Screenshot:

  
  The video in question is about 22 minutes long, but the poster up in like 1 minute.

  Video files are in the following format:
  1280 x 720 @ 60 fps
  Originally recorded with DXTory using the OpenEncodeVFW codec (which is obviously installed on my system), then crossed AVIMux to fix the audio. (Note that even the raw with audio file broke, until she walked the AVIMux has the same problem).

  My PC:
  Intel Pentium G2030
  4 GB DDR3-1600 RAM
  Club3D 14series AMD Radeon R9-270

  NOTE: The read files fine on Premiere Pro CS6. but not on the CC.

  So I finally have a (less-than ideal) solution.

  Get first: images of DXTory (VFW h.264 in an AVI container), I use the OpenEncodeVFW for AMD VCE for registration.
  Next: Use Handbrake (free), imitator of the settings, I record with, with the exception of a crucial, affecting the LOSSLESS quality (0). This prevents the loss of quality during this process (and I can confirm, you can't tell the original file and the brilliant new mp4 out).

  After that, the generated .mp4 file is recently fully recognized by the first.

• Nikon Lens EXIF import does not correctly

  Hello

  I use the latest version of LR CC, and since the last update I do not seem to get my goal of data appears in the Loupe Info or the EXIF field for goal. Correction of the lens works and correctly identify the type of lens, but I don't get the news. This info then not exporting to files that I upload to Flickr, which was until very recently. I get the focal length, and any other information. If I use a Fuji and inside indicating the name of the target and data.

  

  Nikon Lens - shows the range of focal lengths from 14mm, but not the goal type.

  

  Fuji lens - watch the goal in parentheses.

  Any ideas on what this could be? I have inadvertently done something or is this a bug?

  Thanks in advance!

  Hello, this is a known bug and will be fixed in the next version if all goes well.

  It applies only to Nikon, but the good news is there is no data loss, it is simply a misrepresentation of data.

• cc of Photoshop import does not files

  cc of Photoshop import does not files

  Quit Photoshop and run it with the SHIFT key and choose "Yes" to skip the loading of additional plugins.

  If this does not help, you will need to reinstall Photoshop CC2014.

  Here is the article you need to follow: Photoshop com.adobe.preview.loader extension could not be loaded

• The editor Lite Cinema 4 d does not open of in After Effects.

  The editor Lite Cinema 4 d does not open of in After Effects. I am able to create new files of MAXON Cinema 4 d from the file > new menu and comes from the file > export menu. I am able to use cinema 4 d effect on a layer to display a file 'c4d' next to a composition. But when I click on Edition > edit the Original option of a '.cd4' drop my mouse icon changes to "pending" for a second, as if he's going to open something, but then nothing happens.

  I'll double check the path of the cinema 4 d application Lite.
  I temporarily increased for 'control' permissions on the following folders

  • Program files (x 86) \Adobe
  • \Users\[user]\AppData\Roaming\Adobe
  • \Users\[user]\Documents\Adobe

  I am running:
  After Effects CC 13.7.1.6.
  Windows 10 PC
  Processor is Intel i7 - 4770 k @ 3.50 GHz
  16 GB OF RAM
  GeForce GTX 970

  I found a solution for anyone to live something similar: launch After Effects in as long as administrator and then C4D Lite will launch AE Edit--> Edit Original

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• disc eject does not correctly persist

  I get several error messages that my external hard drive was not ejected correctly. I ejected it, turned off, unplugged and then reverse the process. Whenever my screen locks when I open it there are several messages not eject disks does not correctly.

  Restart your Mac, and then drag the disc on the desktop for the external drive to the trash.

• HP jet 7500 a desktop: office jet 7500 a print does not correctly

  Hello
  After you run the print doctor, cleaning and aligning the print heads that it is still print does not correctly. the first page comes out perfect so the print quality gets worse, with bits wilted and things missing. just print a page of print quality and black looks at all and the first steps of pink and yellow are strong, blue stripes and then 2nd very faded pink and yellow bar.
  any ideas?

  Hey watch this video of HP, how do I solve this https://www.youtube.com/watch?v=c422Q-EhMXI if this fixed your problem can you give me a point of congratulations. Thank you

• I have an index page that does not correctly load the css and css works on all other pages of the site.

  http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
  http://www.boulderridgecondos.com/news.htm

  I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

  Any help or suggestion looking for something would be appreciated.

  This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

• Satellite A200 does not correctly reduce or increase the volume

  Hello

  Our Satellite A200 is having problems with its Volume control wheel.
  If I turn the wheel (on the left or in the past), it does not correctly to reduce or increase the volume level.
  He jumps rather the volume level in seemingly random directions (with a preference for the volume).
  Turn the wheel slowly improves responsiveness a little, but it remains quite impossible to increase or decrease the volume control that to be.

  BTW, I am well aware that the volume control wheel is a wheel of puls-encoder rather than ye olde potentiometer.

  -Can anyone you tell me where I can find the configuration that is responsible for this Volume control wheel?
  -Which driver/firmware is attached to the order of the volume control?
  -How can I determine if this is a hardware or software problem?

  Advice would be welcome.

  Stephan

  Hello

  There is no software or hardware problem.
  It is a new generation of volume control.

  First of all there is no mechanical limit turning right or left.
  In addition, this volume controller works a little different than the old volume controllers. The volume can be increased and decreased using the fixed rate

  By the way;
  > Can someone tell me where I can find the configuration that is responsible for this Volume control wheel?
  You can change the volume as in the sound settings that could be found in the control panel.
  > Which driver/firmware is attached to the order of the volume control?
  Audio driver controls the volume controller.
  > How can I determine if this is a hardware or software problem?
  There is no problem

• error code 259 does not correctly updated to sp62736.

  I have a Hp Pavilion 500-141ea im trying to update the IDT audio driver for windows 8, I supported SP sp62736, it passes through the installation procedure, then it stops and comes up with this error code 259 does not correctly updated, I even disabled etc still the same antivirus software.

  Any idea?

  Hi Apache1968,

  If everything works at the moment, with the exception of downloading then I would leave it as it is. The whole "don't mess with what works" thing.

  Thank you