50 d Firmware in Windows 8

Similar Questions

• HP Open-source drivers/firmware (for Windows)?

  I found the HP has open source drivers for Linux systems.

  http://hplipopensource.com/hplip-Web/about.html

  Drivers of Windows/firmwares are also available as open source?

  It would be great, if they were (because I had a lot of problems with them in the past), but I couldn't find the source anywhere.

  I think that the users and HP could benefit a lot if the community could help pilots better and more user-friendly.

  Andras_Fuchs, the answer is no, we don't have a free software for our printers. Is it possible to change the software - Yes, it is. I can personally recommend this because I do not know the ramifications of such action myself.

  Also, these drivers are available for the basic software edition (major patches) because it's open source, programming of entry that matches the OS is very difficult, that is why we cannot guarantee the functioning of drivers if the BONE is altered.

  I hope this information is useful!

• HP Pavilion p6330f and Windows 8 - firmware issues as possible

  Hello!

  I installed Windows 8 on my (greatly improved) p6330f... and I have a few problems that were fixed with updates of the firmware posted on the page for this model of computer.   I installed the updates of the firmware under Windows 7, and there is no version of Windows 8 updates.

  Here are the updates that are on the page-

  BIOS: fixed fan speed< i="" am="" having="" this="" issue="" again="" while="" running="" windows="">
  SATA hard drive update: data is not properly registered< i="" am="" having="" this="" issue="" again="" after="" running="" windows="" 8="" (especially="" with="">

  New versions of the firmware we will post for Windows 8, or I come to Windows 7?   Please advise...  I updated all parts of this machine in addition to the motherboard and processor (16 GB DDR3, 2 TB drives, AMD Radeon HD, the new power supply graphics card) and I have tweaked Windows 8 to a point where I like it so I don't want to go back to Windows 7.

  Thank you.

  card BIOS update mother MS-7613 and the SATA hard drive Firmware update has been permenently wrote in the BIOS of the computer chip and the chip of the firmware of the hard drive. The updates actually changed the code in hardware and change the operating system will not cancel these changes. The BIOS/firmware updates are still part of the material regardless of the currently installed operating system. The reason why HP lists updates that are compatible with Windows 7, because their installer has only been tested for use with Windows 7 and the controls to see that Windows 7 is installed before upgrading the system.

  No update of Windows 8 will be available for your computer because of his age. You can check your BIOS version to verify that it is still in the v5.15 and you can do the same for the hard disk and make sure it is "BX". Other than that, the computer is not supported by HP for use with Windows 8 and HP will not provide drivers or updates for the computer.

  BTW... I see that you have two of the same post... label, and the forum rules dictate a single post for a specific subject.

  Please send Bravo

• DesignJet 5500: firmware update error

  The firmware on my printer is: S.03.12D

  I went to this URL:

  http://h20566.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=82219 & swLangOid = 8 & swEnvOid = 181

  and downloaded the firmware under Windows 2000, even if I have Windows 7 64 bit on my computer because I thought that the firmware was just download to the printer, so it should matter what OS is on the computer.

  I downloaded S.56.07 February 3, 2009

  I downloaded the firmware to the printer file and it improved up to 97% and then gave the error message below.

  An unexpected error has occurred. Make sure that the firmware you are using is a valid firmware file.

  I have a Designjet 5500 and I went from dye in ink UV, if that matters.

  The printer seems to be ok, but it would be good to know how I can upgrade the firmware.

  Yes, a connection between the computer and the printer is recommended.

  Version of the OS is not the problem here, but exact number of the product will make a difference, so please use the actual peripheral product number.

• Pavilion p7-1421 Windows 7 drivers

  Just bought a HP Pavilion P7-1421.  My employer requires Windows 7 Pro.  I have a serious problem find Windows 7 drivers, including drivers for Ethernet.  I found a network controller driver Atheros so-called 64 bit to Windows 7 64 bit butI get an error message indicating that the driver is not compatible with my hardware AR81.  Any suggestion would be appreciated.

  Here are the specifications of your desktop HP Pavilion p7-1421. Windows 7 drivers for this model are as follows;

  AMD Chipset drivers

  AMD Catalyst Display Driver

  Qualcomm Atheros Customer Portal (select "Family AR816X drivers", "WIN AR816X Windows WHQL driver", you will need to extract/unzip the.) RAR with WinRAR or similar file)

  Driver Ralink RT2860/RT2760/RT2890/RT2790/RT306X/RT309X/RT35X2/RT539X

  For more information, see forum thread HP titled "firmware to Windows 7, need help with specific drivers. The model referenced in this thread uses the same exact motherboard as yours. Post back with "Hardware ID" If you need more help.

  Please send Bravo

• Sansa Fuze not recognised by Windows 7 laptop

  Hello

  My 8 GB rocket has been recognized by my computer laptop windows 7 the first day I got it, and now it happens as a device "unrecognizable."  When you look at the properties, I get an error Code 43, which means that the device has "reported problems."

  I have tried the following with no luck:

  -All USB ports in my laptop (including my USB Hub)

  -MSC/MTP/Auto modes

  -Cannot update the firmware because Windows does not recognize it

  Add/Remove the device manually in the Device Manager

  Anyone who has something else to try would be welcome.  Thank you!

  Hey Rectangle, thanks for the idea...

  I have to admit that, seriously, I tried all of these crazy solutions for HOURS when I realized that I bought a cable non-sandisk as part of a pack from Amazon.

  I found my Sansa brand cable and everything works as it should.

  DO NOT USE 3RD PARTY CABLES, THEY ARE JUNK!

• is there an update of firmware for Mac? If so, can you post a link please?

  Hi, this may sound incredibly stupid but the thread FirmWare says Windows only and after searching around, I found an effective link otherwise explicitly states "Mac version, download" or something like that.

  y at - it an update for Mac users? If so, can you kindly post a direct link to this page?

  I have one more video, 4 GB, BTW, and I use an iMac intel more recent.

  Thank you.

  This means that the update of the firmware is for the PLAYER, not the computer, it is attached. You download the firmware even on computer, then transfer the fom the computer firmware to the drive. The MSC part refers to the USB mode on the player. You use the MSC mode because the alternative (MTP mode) is a Windows thing.

• LaserJet CP3505: Hp Laserjet CP3505 firmware update is blocked at 6/6 A / F

  Tried to update firmware through Windows Explorer and an IP address. The printer does not complete the update, it hangs at 6/6a / F on the Panel of the printer. Even after the power of recycling, he ended by in even!

  Please help me get back the use of the printer.

  Do not use the button until the memory starts counting from the screen.  When you press the button wait until all 3 lights turn on solid to continue the procedure.

• Windows Vista Home Edition of Windows 7 Ultimate

  I plan to buy Windows 7 for our desktop computer.

  Can I pretend I just changed the theme to 7 (for example all my files parameters and data programs and application) or is it a miracle that I can use any time or what I have to insert the disc and do an upgrade or install own (Im going to 64 bit 64-bit) I have a lot of data program on games etc and I'll be happy if I have to get up to the level I was at When I upgraded

  First, check the manufacturer of your computer running Windows 7 on this computer.  If the hardware is not supported - Windows 7 on this system will be nothing but a problem to you caused by the material of the old system.

  Secondly, check that all the programs and devices you are using are supported in their current versions/level of the firmware in Windows 7 by their manufacturers.  If the software and devices (printers, scanners, cameras, etc.) are not taken in charge - Windows 7 on this system will be nothing more than a problem to you caused by inherited and/or software devices.

  Thirdly, make sure that you have a backup of all important data for you and the operation of this machine before you start any upgrade process.  This would include documents, pictures, music, spreadsheets, databases, presentations, contacts, emails, installable downloaded files (executable files), serial numbers, product keys, etc. and so forth.  Also be sure that you know what hardware is in your machine and already - if possible - have Windows 7 drivers and the software downloaded and stored on an external support for it.  Belarc Advisor is something I suggest you now run and print the results to keep to help such things.

  You shouldn't have to do a clean install and you need to keep your compatible software and all your settings, etc.  My suggestion, however, is to purchase a full retail copy it Windows 7 so that is this machine later dies or replace you it in some sort/upgrade massively (replace the motherboard) - you can install this Windows 7 license to another machine.

• Help me to solve the problem with modem hspa usb on Windows Vista and Windows 7

  Hi, I have a problem with my USB HSPA modem when I tried to install in my Windows Vista 64 - bit PC. Sometimes it's OK, but sometimes it has encountered an error trying to install it. After the installation of the almost complete progress, reports of windows as "Unknown material" or "driver is not found. Maybe after a few tries, I was able to install the modem. But later, its happened again. I take the modem at the other PC with XP, it is still OK, but it happened again with Windows 7 Ultimate 32-bit home version. so could you help me to fix it? is it a bug of Windows Vista and windows 7? Thank you very much

  Hello

  go to the website of modem manufacturers and look for the last vista and/or firmware for windows 7

• Impossible to update firmware (CM1410) 20131028 - no RFU on Service menu CM1415fnw

  I have trouble to update the firmware of my printer.

  Model CM1415fnw

  Type of connection without wire/Hello

  Service ID 21094

  FW Version 2010-11-25.

  Driver HP LaserJet CM1415fnw 1.0 Version

  Product number CE862A

  I am connected via a MacBook with OS X 10.9.2. I have Parallels Desktop 9 installed under Windows XP.

  I downloaded and installed the latest driver for my computer.

  HP LaserJet Pro CM1415fn color MFP series Full Software Solution - OS X 10.9 Mavericks2014-01-31, V...

  I downloaded the Mac firmware update. File name: CM1410_MFP_Series_FW_Update - 20131028.dmg [1/1, 48.86 M] Version 20131028. When I try to run the update of the firmware on Mac, I get the error message "cannot open"HP Firmware Updater". You must eject the disk image. "Preferences | Security | Allow applications downloaded from anywhere. I tried to download the update several times, in the event that a download has been altered. Did not help.

  I downloaded the firmware from the Windows Update. File name: CM1410_MFP_Series_FW_Update - 20131028.exe [1/1, 12.12 M] Version 20131028. When I run the update of the firmware in Windows, the "HP LaserJet Professional CM1410 MFP Series Firmware Updater 20131028" program runs in a window. I am able to choose my printer "HP LaserJet CM1415fnw (41 d 33)". I click on the Firmware 'send '. The 'Progress' bar shows the progression up to the end. I click on "Exit". But nothing happens on the side of the printer. And the firmware information remains the same.

  Hi frustrat10n,

  I understand that you can not update the firmware of the printer.

  I'll be happy to help you.

  There is no RFU on this printer. Just continue.

  I checked the site and it is not an update of the firmware that you can run on 10.9.

  I would say for temporarily, connect the USB cable and try upgrading the firmware on a PC or a computer with 10.8 or less.

  It might work if you are using bootcamp on side windows, but probably not by parallels.

  Why do you need to update the firmware of the printer?

  You have problems?

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a great weekend!

• Unable to access HP hs2350 module HSPA + broadband (WWAN Ericsson) Mobile after upgrade Windows 8.1

  Hello world!

  I upgraded my HP Elitebook 8470 laptop 'Windows 8 Pro with Media Center x 64' to 'Windows 8.1 Pro with Media Center x 64 "OS.

  After this OS update module HSPA + Mobile broadband to the HP hs2350 (WWAN Ericsson) has stopped working.

  Follow-up of the steps to solve the problem:

  • I uninstalled the device and the driver through the Windows Device Manager, uninstalled the driver control panel software and restarted the machine.
  • Open the Device Manager and tried to update the driver, but Windows could not find a driver online.
  • Went to the support page for the HP product and downloaded and installed: update of firmware for Windows 8 "sp60091.exe"; latest driver Windows 8.1 "update sp63292".
  • Rebooted the machine, and the problem was the same:

  Because upgrade operating system I can't access my ADSL module (it is not detected).

  I checked the Windows Device Manager, and it seems that the driver is correctly installed but unit "HP hs2350 HSPA + Mobile Broadband Network Adapter" is constantly turning on and off with an exclamation point. See its properties I get the message:

  "This device cannot start. (Code 10) {Operation failed} The requested operation failed.

  or "this device is working properly".

  (this information to randomly change every second with the exclamation mark next to it).

  I tried to run Windows troubleshooting-> audio &-> & devices, but he could not find a compatible driver.

  Can someone help me, please?

  Is just to inform that Microsoft has recently developed an update for this material (Ericsson - Mobile Broadband MOBILE - HP hs2350 HSPA + Mobile Broadband Module network adapter).

  You can access it through Windows Update.

  Thank you, Microsoft.

• Windows 7 PC Blue Screen: STOP 0x000000F4

  Three weeks, my computer began to experience regular blue screens for no discernible reason. My first instinct was to update all my drivers and make sure that I had all the latest updates, I also ran several diagnostics; memory and hardware checks, analyses the virus, it came up saying everything's fine. I run a custom Setup, so I tried unplugging different disks without success, which leads me to believe, there is a problem with the boot drive, but, as I said, all the checks I ran on it come back saying otherwise.

  I tried to download the Windows SDK to run several tests, but there will be nothing more than the computer. I tried to run the system restore several times and always, he fails to finish, then when I come back, regardless of the system image, I tried to restore will be gone.

  I tried to swap around cables on all players with brand new ones and that does not work so I'm kinda an impasse, any suggestions would be helpful.
  Here is some information on the blue screen, the last times, he only has not dumped physical memory:
  A problem has been detected and windows has shut down to prevent damage to your computer.
  A process or thread crucial to system operation has unexpectedly left or came to an end.
  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
  Check to make sure any new hardware or software is installed correctly. If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.
  If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
  Technical information:
  STOP: 0X000000F4 (0XFFFFFA800704AB30, 0XFFFFFA800704AE10, 0 X 00000000000000003, 0XFFFFF800035CE350)
  Data collection for the crashdump...
  Initializing disk for crash dump...
  
  
  System log:
  http://sdrv.Ms/10RoTfi
  Application log:
  http://sdrv.Ms/10RoYPX
  Update of information system:
  http://sdrv.Ms/10Rp76b

  What is your computer brand and model? If not a branded computer, what is your motherboard brand and model?

  You may be affected by the problem described in this link:
  http://en.kioskea.NET/FAQ/29514-crucial-M4-how-to-remove-the-5200-hours-bug

  http://www.crucial.com/support/index.aspx

  To find out what firmware revision your SSD is running, follow these steps:.
  1. click on the start menu
  2. open the control panel > system > hardware
  3. Select Device Manager
  4. expand disk drives
  5. right click on the drive and select Properties
  6. Select the Details tab, and then select "Lds material" in the dropdown menu drop-down. The firmware version will appear on the far right.
  Source: http://forums.crucial.com/t5/Solid-State-Drives-SSD-Knowledge/How-to-Find-Your-Firmware-Revision-Windows/ta-p/114208

  The verification code bug for BSOD errors you encounter is 0xF4, so this may be the cause of your problem.

  Your file system information-[peripheral problem]

  Device PNP Device ID error Code USB Universal Serial Bus () controller PCI\VEN_1B21 & DEV_1042 & SUBSYS_84881043 & REV_00\4 & 16B16BD2 & 0 & 00E7 that the drivers for this device are not installed.

  You need drivers Asmedia. When you say your computer brand and model, I can be able to provide more help.

• Need to know if my router is compatible with windows 7

  The microsoft Web site seems to send me in circles and it drives me crazy! What I want to know is if my wireless method NB9W router is compatible with windows 7 or not...

  It is a work laptop and our COMPUTER technician has not set. I can connect to the network wirelessly at work, but not my own wireless network at home. I read that some 'old' routers are not compatible with windows 7.

  I can't find any info on my model of router on the microsoft Web site. Help please!

  Hello

  Collate support method because it might be and need the firmware, for example.

  Using WPA or WPA2 (and not WEP) security? The value WPA or WPA2.

  NB9W
  http://www.netcomm.com.au/Netcomm-products/VoIP/nb9w?SQ_PAINT_LAYOUT_NAME=support

  This implies that it is Windows 7 compatible (might still need the firmware)

  Windows 7 - obtain an IP address
  http://www.YouTube.com/watch?v=XC7Ebm0UKi8

  and

  Windows 7 - wireless connection
  http://www.YouTube.com/watch?v=MqWJ7exMJhE

  NB9W
  http://www.netcomm.com.au/Netcomm-products/VoIP/nb9w

  Method Support
  http://www.netcomm.com.au/support

  It can be configured to not work on networks other than at work, have your tried on
  other networks in addition to work and home?

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 8 blue screen system service exception

  So, Yes, as everyone else seems, I was plagues with the BSOD and a notice of the Service Exception system accompanied by an automatic restart. Which after looking around a bit seems to be an umbrella for all kinds of things... Makes me really miss the old day of codes that could ultimately help you solve the problem.
  New HP 2000 Notebook PC, the only program I get not the error is so OUT of the wild tangent game. Other than the error was quite blind. Any help would be amazing. And is there a way to keep from having to restart immediately...
  Here is a link to the last minidump file http://sdrv.ms/124Gq9w and a link to the file msinfo32 a http://sdrv.ms/W4Po4h (.nfo & .txt)
  The two files are compressed as usual on request.
  Thanks for any help.

  There is now an update of firmware for Windows 8 computers that use AMD processors:

  http://support.Microsoft.com/kb/2818604

  So make sure that this update, as appropriate to your system, is installed.

  This update can allow KB2778344 be installed without problem.