5520 file transfer question

Similar Questions

• Cannot transfer the file to WCS 5508 - Code file transfer failed - unknown error - refer to log

  Hi all

  This is my first time here posting. I have some difficulty to transfer files to my WCS 5508. My intention is to upgrade to

  6.0.196.0 to 7.4. We recently bought 2602i access points and we need to update our controller software so that the controller save the new access points. I also improved the interface controller 7.0.240 WCS software.

  However, I have not been successful transfer the file to the controller for the upgrade.

  I have tried everything I know:

  * transfer the file of different programs including tftp32d and solarwinds TFTP server

  * transfer the file of different applications such as FileZilla and FTPD FTP server

  * transfer the WCS web interface file

  * running a direct connection to the WLC with a static IP address on the interface

  * verified that there are no interfering firewalls with transfer

  * adjusted times waiting and pads as a result

  I get no error message on my software FTP or TFTP, which would indicate something wrong with the applications. I think it is a bug with the controller.

  The transfer reachers about 97MB before it fails.

  Here are the error messages I get when I run "transfer of debug output all" from the CLI of the controller

  I feel I forgot something...

  # #debug transfer all out #.

  * Did not write body

  * Only partial file received: 97086398 bytes

  * 23:55:26.248 Mar 06: ftp operation returns 23

  * 23:55:26.253 Mar 06: tftp = 4, = file_name / AIR-CT5500 - K9.aes, ip_address = 10.5.1.18,.

  MSG = unknown error - refer to log

  * 06 Mar 23:55:26.470: upd_get_code = 4 (target = 33744 msg = unknown error - see t

  O log)

  * 06 Mar 23:55:26.470: RESULT_STRING: % error: file transfer has no codes - Unknow

  error - refer to log

  * 06 Mar 23:55:26.470: RESULT_CODE:12

  * 06 Mar 23:55:26.470: ummounting: DLG = / mnt/applicati

  on

  * 23:55:26.577 Mar 06: finished remove

  % Error: Code of file transfer failed - unknown error - refer to log

  #############################################################

  Here's my output sysinfo sh.

  release of sysinfo #show # #.

  Name of the manufacturer... Cisco Systems Inc..

  Product name... Cisco controller

  Version of the product... 6.0.196.0

  Bootloader Version... 1.0.1

  Retrieving Image Version field... 6.0.182.0

  Firmware version... Console USB 1.3, 1.6 Env FPGA,

  1.27

  Build Type....................................... DATA + WPS

  Name of the system... WCS_01

  Location of the system... G5

  Contact System...

  ObjectID of system... 1.3.6.1.4.1.9.1.1069

  IP Address....................................... 10.1.0.17

  Last Reset....................................... Software reset

  Time system... 0 days 0 h 53 min 10 dry

  Location of the time zone of the system...

  Base boot license current level...

  Current license type Boot... Permanent

  Next time you start level license... base

  Next Type of license to Boot... Permanent

  ###############################################################

  Any suggestions? Am I missing something?

  Well... Since you're WCS, v7.0.x is the only code that are supported for the WCS.  Look here.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/compatibility-matrix.html#18972

  So the trick to this is downgrade to v7.0.x and add the WLC WCS and then go to v7.2.121.0.  As long as the WLC is added and is attached to the WCS, you can upgrade.  If the WLC is not attached, you will never get to add with a more recent version of the code.

  Thank you

  Scott

  Help others using the system of rating and marking answers questions like "answered."

• Network file transfer speed in windows 7

  I have a working network.

  Files shared in a warehouse are used by other customers. (file size is 1 GB and more)

  Some customers use windows XP and some customers use windows XP.

  My operating system file server is windows server 2008 and I use file sharing.

  The use of files shared in windows XP (software import and editting) has no problem, but in the same use in windows 7, it is very slow.

  File transfer speed is slow and the access to the files in the software takes a long time.

  Example: In windows XP, a 12 GB file is imported into edius pro in a second, but same file in windows 7 takes 65 seconds to import

  What security options are why, or how I can solve it?

  Hello

  Which version of Win 7, you use in client side, he logged in as a domain for win 2008 Server.
  I hope that the system win 7 is not a task force. Home network with one or more computers running Windows 7 can experience slow file transfer speeds, specifically during the transfer of files with other computers running different operating systems,

  Turn off and disable the Compression feature differential to remove Windows 7 can be a solution to slow copying files, file move or delete the file bug.

  • Click the Windows 7 start button, then go to control panel.
  • Click on the link programs.
  • In programs & features section, select features Windows activate or disable the link.
  • Uncheck the remote differential Compression checkbox.
  • Click OK.
  • Wait for the feature to be disabled.
  • Once completed, restart the computer.

  If the same question post here for more information

• File transfer from Windows XP to Windows 7 Pro.

  How can I transfer my old PC of Windows XP files to the new PC with Win7 Pro? I tried to install Windows Easy transfer on the old PC, but it won't let me install it and install on Windows XP file transfer doesn't transfer for Windows easy transfer. How can I transfer my old files?

  See the following for instructions:

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

  or

  How to organize and archive files

  Allows you to do this by using the organizational tools built into Windows 7. The first place wherever I start looking at is my downloads folder since I do a lot of downloading.

  

  In order to properly analyze what we can, keep and move to an external hard drive, we'll use the menu to change the view . Click on the menu to change the view, and then click details.

  

  You will notice that your files are organized with more details. To further customize the view, click the Date Modified column header. This will allow us to view the files when they were used or last edited. Another column, I recommend that you post is the Date created column.

  

  Right-click on the column heading, and then click on created.

  

  This will give us a better idea of the age of the file and if its worth keeping.

  

  Looking through my downloads folder, I have files going back to the beginning of 2007 and the last time that I accessed them were in 2007. Certainly not useful to keep on disk. If these files will be archived and moved to my external hard drive.

  Archiving

  Obviously, to do something like that, you're going to need an external hard drive. You could choose DVD as a backup method, but they can be unreliable and more a chore, especially with the permutation of the disc in question. Once you have identified the files you need to Archive, open your external hard drive and create a folder specially for these files called Archive.

  

  Open it and then go back to the (window) folder where your old files are currently on your local hard drive. Select the files, and then click organize > copy

  

  Return to the folder Archive (window) we have created on the external hard drive, and then click organize > then click Paste

  

  

  Please wait while files are copied to. Once this done, go back to the folder and click on organize > delete or press Delete on your keyboard.

  Simplify the file selection and copy

  If you want to select files in a date range, just select the first file then click on any file within the range, see below:

  

  

  Repeat these steps for the other records of the person such as Documents, music, photos and videos. When you are finished archiving, you can move to permanently delete these files from your bin if all are stored:

  

  I was able to recover coupons 10 GB worth of disk space only from my only download folder.

• Easy file transfer to homegroupuser

  Hi all

  Recently used easy file transfer with my new computer.

  But I chose homegroupuser and the old account was not made/vire.

  What should I do - delete all files and start again or there at - it an easier way?

  Thank you.

  Michael

  Hi Michael,

  Usually, when you copy the files using the easy transfer cable, the files will be saved on the desktop. I suggest you try the steps from the following link on how to use the Windows easy transfer cable.

  How to use Windows easy transfer to transfer files and settings in Windows 8
  http://support.Microsoft.com/kb/2735227/en-us

  See also the link: http://windows.microsoft.com/en-ca/windows-8/getting-started-skydrive-tutorial

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Mini Mac server - attachment of external hard drives file transfer speed

  Hi guys!

  I wanted to increase the speed and storage capacity to transfer to my Mac mini file, so I bought a box of external hard drives. The one I bought is: http://www.icydock.com/goods.php?id=219

  Built-in the Mac mini hard drives transfer the file to 60 MB/s (writing and reading) and I wanted to get better speed of file transfer, so I bought an SSD that is going to be inside with an another HARD drive of 3 TB for archiving my files. The housing is connected by USB3.0 (5 Gb/s) for the Mac mini.

  [SSD-> files I opened every day] - speed around 550 MB/s write and 500 MB/sec in reading

  [HDD-> Archives, files that I have does not open very often] - speed around 150 MB/s write and 150 MB/sec in reading

  So I did some benchmarks on my new Setup, and the speed is not really what I expected. Transfer of file max speed I have achieved is about 100 MB/sec in writing on the external SSD plugged into the mac mini. This transfer has been filed since an iMac 21 "2011 with an SSD (with almost the same speed read/write than the box) so it's quite disappointing.

  It is possible that the Mac has a 'file transfer speed limit' is somewhere? Or whatever else that could affect that?

  More information on my setup:

  Mac Mini server 2012 - 2 TB RAID 1 - Mac OSX 10.9.5

  iMac 21 "2011 - Crucial SSD 275 Gb - Mac OSX 10.9.4

  IcyDock external enclosure - 4 bays, USB3 5 Gb/s

  -Red WD HDD 3To

  -Crucial SSD 1 TB

  Together internal Gigabit Ethernet network

  Thank you!

  Was perhaps Spotlight indexing external at the same time, the test has been done?

• File Transfer issue between 10.4.11 + 4.4 Android phone

  Hello.

  I recently got a Polaroid link 6 "A6WH smartphone, Google Android KitKat 4.4 running, and despite being told of Polaroid that I should be able to transfer files (ie. photos, music, videos) between this phone and a G4 aluminum PowerBook running OS 10.4.11 (old, Yes, I know!), I can't. I was told that I have to download Android File Transfer, which I did, but it didn't work (it only works on OS 10.5). Android File Transfer is Version 1.0 - I don't think that there is no earlier version.

  I tried to search on this forum and elsewhere online, some have suggested other programs, such as AirDroid, but when I tried to download them, they would not work with OS 10.4.11.

  I was able to transfer files over a Bluetooth connection - and only from the computer (and not vice versa). The USB cable provided with the phone doesn't seem to work (anyway) without a program to make it easier.

  Any suggestions for transfer files (ie. photos, music, videos) between these devices - via the USB port, or even simply through Bluetooth, back from the phone to the computer?

  Also, are all the programs available to convert video to MP4 format files, as I can't get the phone to open any other format - BTW, free is better!)

  Note: I would have gotten an iPhone, except for the fact that we tried to get rid of some AirMiles points that were about to expire, and they have not one!

  Thank you

  I have (and have had) smartfones non-Apple for some time

  To transfer ALL kinds of files, I just use an intermediary "cloud service".

  Many here will advise you http://dropbox.com/ as a reliable and free service

  * NOTE: Dropbox is more supported by OS X Tiger with their desktop app - but access via the Web site is not affected (I use TenFourFox: a fork of Mozilla Firefox ESR 38 for Power Macintosh and Mac OS X Tiger PowerPC as a browser)

• Just upgraded to El Capitan 10.11.4 and now Android File Transfer no longer works

  I just upgraded to El Capitan 10.11.4 and now Android File Transfer does not work. Does anyone else have this problem?

  See this link

  http://trendblog.NET/Android-file-transfer-not-working/

  and this alternative

  https://www.iSkysoft.com/phone-transfer/Android-file-transfer-for-Mac.html

  the result is if Apple broke it is the Android dev team to fix it-not just but it of how Apple rolls and won't budge on that, it's same in their EULA, section o. in the case where you think that they be unfair and wish to continue.

• File transfer a BIG bug! Amazing transfer slow and full bandwidth used!

  I read about this since 2014! How Skype does not solve this problem yet? Amazing!
  I am transferring files between 2 PCs on Win7 64 bit and latest Skype (update), full bandwidth of 1.5 Mbps downloading (and I am sure is that Skype to use 100%!) and one day calculated for the transfer of 250 MB! It goes like a turtle! What the hell Skype is the download otherwise files?
  
  Horrible, please fix!
  Thank you

  Transfer of cloud of image files is not yet implemented on Office of Skype for Windows. File transfer is always P2P.

• How to set the location of file transfer by default for the Skype file transfer?

  With the latest version of Skype for Windows Desktop Skype version 6.22.81.104. I can't find the location of default file transfer settings, let me know how to manage these settings.

  http://community.Skype.com/T5/Windows-desktop-client/got-a-problem-when-download-some-files-from-sky...

• Messages - file transfer fail to all types of files (pdf, pages, jpeg, png,...).

  Since a few days now, I have been able to receive any type of files in Messages app. I tried a few things that I could find online (and in previous discussions of apple). Nothing has worked. The only time I am able to open a file is when I send it to someone else or that I send it to me.

  I have tried disconnecting, signature by signing in with a different address and even someone else, have removed the thinking com.apple.ichat.jabber.plist that as is, jabber, etc.

  In addition, I don't have an iPhone, so my phone is not connected to the Messages.

  Here's what happens:

  I click on the file to download, but nothing happens.

  If I go to the 'file transfer' and then click on the download arrow, it shows "preparing..." " for about two seconds and then stops without loading anything.

  

  When I open "Console", I get this message after receiving a file:

  

  Is there something I can do to solve this problem, or I can only hope the next Messages updated to fix it?

  Thank you for your help (to come)!

  More near

  Hello

  Which account is with?

  If it's an AIM chat, which connect on port 443, but file transfers occur on UDP port 5190 Protocol and if it is not open in your router or a third-party firewall, it will fail.

  

  21:36 Tuesday. February 23, 2016

   iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• BT file transfer: files with '&'s cause reception failure

  Hello

  I use a Satellite A200 with the last BT Stack (5.10.06T). File transfer is fine, unless the file has a sign & (and) in... Is this a known bug? Is there a fix due? It's incredibly annoying!

  See you soon,.

  Greg

  Update: after further investigation, the problem is actually with the files containing the apostrophies. They are converted to xml literal "' and then probably the battery cannot download the file because it does not exist with this name.

  Sorry for the mistake... someone can advice if this is a known issue, or should be set? :)

  See you soon,.

  Greg

• Who installed Procomm Plus - error message: file transfer error general error 119

  Anyone tried to install ProComm Plus more. Just could not get it to load fails on an iswinapi.dll of the GET the error message:
  Error - 119 target general file transfer error-check

  Hello

  It seems that the Symantec has designed this ProComm Plus application
  Why n t ask the company to Symantec for advice and support.
  The support guys generally have more experience with clean products

• FTP file transfer

  Hi all

  I'm trying to transfer a file from my RIO 9074 on my local machine. I have attached the vi that I use. The problem is that even though I can read all the files inside the RIO, the FTP GET multiple just Files.vi transfers the file to the top of the tree of directories of RIO and NOT on my local machine; It is independent of the "local path", I give...

  Please note that I can manually transfer files from RIO on local machine via the Measurement & Automation Explorer / file transfer... So I guess it has nothing wrong with my accessibility of RIO.

  All ideas, it has to do with how I give my constant "local path"?

  Kind regards

  Harry

  Hi Harry,.

  Please stick to the subject.

  Mike

• I set up ftp in iis for the file transfer. On the pc that I am currently in place I cannot transfer files to it via ftp. He says that the password is not accepted.

  FTP problem

  I set up ftp in iis for the file transfer.  On the pc that I am currently in place I cannot transfer files to it via ftp. He says that the password is not accepted.  When I look in the properties of the default ftp sites ftp I noticed that the Directory Security tab is not there as on the other pc.  How to return this tab or is it the windows software that's not fair.  I am running windows XP 2002 SP2 on it and I've updated to SP3.  I have no idea.

  Hello

  I suggest you to send your query to the link for assistance.

  http://forums.IIS.NET/