5540 ENVY: Envy 5540 connect not not Mac El Capitan

Similar Questions

• K7C85-a: NVY 5540 does not print

  I use a Mac and my ENVY 5540 does not print and has an exclamation mark on the icon on the dock.  I unplugged the printer, the wi - fi connection and the computer nothing works.  I had no problem with my old HP if someone else had problems with this printer.

  Hi @bjp33,

  Welcome to the HP Forums!

  I understand that you can not print with your printer HP Envy 5540. I'm happy to help you!

  To confirm that the hardware of the printer is functional, you are able to print a test page, without using a computer?

  1. Load plain white paper in the input tray.

  2. On the printer Panel, drag the screen to the left and then press Setup .

  3. Touch tools.

  4. Drag upward on the screen and then tap print status reports.

     The printer prints the report.

     Figure: Example of a printer status report

     

  In the meantime, please try a hard reset by following the steps in this post, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope hear from you soon!

• HP Envy 5644: My hp envy 5644 does not install drivers for my laptop

  my HP envy 5644 some drivers will not install and cannot use the eprint button. tried to click on the set up button and accept the terms of use, but he said: "the printer cannot connect to the server...". "I printed the report and the diagnostic results: PASS all except the DNS: confirmed in case of FAILURE. I followed the instructions for the solution indicated on the report but nothing happened.still the same. I have not the scan doctor on my desk since I can not install.part of the software is installed, the portable computer recognizes the printer. I can't turn on the printer web services. tried pressing the eprint icon, turned again, and the fact the educated solution but nothing happened. * use the Wi - Fi

  Hi @CuriousMind,

  Welcome to the HP Forums!

  I see that your HP Envy 5644 will not install the drivers for your Windows 7 laptop. I'm happy to help you!

  To download the scan doctor, see this website, HP print and Scan Doctor.

  Otherwise, I recommend you to go through this guide, a "cannot find the printer ' display the error to the HP ENVY 5640 and DESIRE 5660 e - all - in - one printer series."

  Hope this helps and have a great day!

• HP Envy 4500: URGENT - HP Envy 4500 does not print with only a black cartridge

  Hello

  My HP Envy 4500 will not be black and white print with just the black cartridge. I want to use the color cartridge, which is almost empty. Result: my pages get printed in a greenish color. I can't select the option "only use black cartridge" in the print option either (it is disabled). I tried to delete the printer and re - install again but it doesn't change anything. I use a Mac with os x 10.6.

  I need to print important documents quickly, so any quick help is more than welcome!

  Thank you

  Gunther

  Use single-cartridge use the HP ENVY 4500 series with only one cartridge.

  Mode single-cartridge begins when an ink cartridge is removed from the distribution of ink cartridges.

• I can't connect to my mac because the SHIFT key is down. Then he showed the top letter and can not connect... The mac is also overheating. I went to the apple store and they said that they cannot fix and need to send to the factory. Connection of same slo

  I just used my mac. I bought it on January 2014.

  A few months ago I couldn't connect to my mac more. There is nothing special on my mac to record.

  He was showing the wrong password when I tried to connect to my mac. It is overheating sometimes without help.

  So, I brought it to the apple store and they said that the shift key is down and therefore superior letter is all the time. and they could not help me open on the inside. Apple store guys suggested me to display somewhere or send it to the factory.

  My question is

  (1) what should I do

  (2) if I send to the factory or should go to the repair shop.

  you guys have an idea what the problem with my mac?

  I suggest you send to the factory, or if you have an apple authorized dealer / repair shop to fix the SHIFT key first, then a glance as to why the fan is still running hot.

  Maybe something has damaged the keyboard (shift key) area and also the fan internal.

  You can't have something special on the computer, but I'd always spend extra money to repair.

  The sooner, the better.

  If you need take photos or documents off the power the computer have you tried to connect an external keyboard to type your password?

• HP ENVY 7640: new HP Envy 7640 will not feed documents in scan mode

  New HP ENVY 7640 will not feed for scanning documents.  It transmit documents in copy mode but not when you try to scan several pages.

  Hello

  Thank you for using the HP Forums.

  Have you installed the software features FULL?

  If this isn't the case, please download and install the FULL features software:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have done this, launch the Scan software (via the HP printer Assistant) and make sure that the source is "heavy use document feeder.  (Example shown)

  

  For more tips scan, please reder to this resource:

  Scanning for Dummies

  Your printer uses the NEW interface of scanning.

  Hope that helps!

• HP Envy 120 do not print

  My printer HP Envy 120 is not printed correctly.

  The printer accepts the job, pages come out of the printer, but the only thing that appears on the page's hyperlinks. I tried printing from three different computers and printed various documents Microsoft word but its all the same impression.

  Is there something you would suggest that I should try?

  Thank you

  I would try the doctor print and scan to see if it will detect and fix the problem automatically

  Try printing HP and Scan Doctor for Windows

• Want 5540: Connectivity, can I use want 5540 USB and wireless on two nearby PC win 7 and Win10

  Can I connect the envy to one not wireless pc (Win 7) USB and a new PC wireless Win10. A single pc in use at the same time...

  My HP C3100 unit is old and broken, sounds like a cement mixer, but still trying on USB only.

  Hello

  Thank you for using the HP forum.

  The answer is 'YES '.

  Just make sure that you download and install the software (with the correct operating system) on each of the PCs.

  Hope that helps!

• I bought Photoshop element 14, but got the version of Windows, not Mac I wanted. Is it possible to change? I have not yet downloaded. And is it possible to contact Adobe to have an answer?

  I bought Photoshop element 14, but got the version of Windows, not Mac I wanted. Is it possible to change? I have not yet downloaded. And is it possible to contact Adobe to have an answer?

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• Map NETWORK connection not after VM provisioning in vWorkspace 8.0.1

  Hi all

  "I use vWorkspace 8.0.1 and lay out Windows 8 VM service but the problem is that I get the error message after VM provisioning '" virtualization management server reported any IP address to the computer "in the console vWorkspace.

  I tried to find the problem and found that the virtual machine on the ESX Server in not connect not not the NETWORK adapter after provisioning from the model.

  It is not question in the model as the provision of the vCenter VM is ok. ther is not question once we create VMS in vCenter. But when we try to provision vWorkspace VM, then it is in error.

  Can anyone let me know the setting of the NETWORK adapter in the virtual machine commissioning through vWorkspace.

  Please find the attached error screenshot.

  Environment-

  vWorkspace - 8.0.1

  ESX - 5.1

  vCenter - 5.1

  Thank you

  Jean Claude

  Additional accessories:

  • 
    error 1.png

  Hi Alain,

  Do you use Customizing to OS using vmware or sysprep vworkspace function. If you are using vmware options are trying to generate an empty image and deploy it using vworkspace with sysprep option.

  I'm not familiar with your problem but I don't know that when you sysprep and the deployment of a server using vworkspace work perfectly.

  Otherwise run your vmware customization to see if there is something wrong.

  Best regards

  Sijtze

• Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL

  Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL.

  It's sad to see how Samhrutha answer to the question in this way.

  The driver does simply not good.
  The only option to address this situation in the meantime a driver that works, disable features in ' Configure, Advanced tab "on the actual card.
  Different properties exist here. Try to enable / disable some of them. It helped for me on Win7 x 64 ASUS MB.
  Kind regards
  fundutzi

• Remote Assistance error: "Easy connect, not available.

  Original title: easy Remote Assistance connect will not work

  I have 2 systems of windows 7 on a local network using Qwest PK5000 modem-router.  Both systems are connected via the home network and share files between them very well and there is only 1 active network.

  If I run the MSRA command on the 64-bit computer and select easily connect using the option "help somebody", the system displays the security code for the other system to use or "invite".

  On the 32-bit machine when I try either options it goes to the "easy connect, not available.  Network Diagnostics has found no problem, but if I try to access the Internet connectivity evaluation tool I can't in the tool.  It says at the bottom "IE6 is required" and nothing happens.   So I don't know if the PK5000 was the Peer Name Resolution Protocol on it or not.  Qwest or Actiontec will not respond to the request.  I guess it's OK if the 64, but the machine would not immediately come with the password to use on the other machine.  The command ipconfig/all look the same on both machines. Furthermore, both systems are (Inspiron 580) and DELL (XPS 420).

  Please give me more advice on this problem.

  Problem solved!

  Downloaded "Teamviewer.exe www.teamviewer.com.  It is a product of superior quality on remote assistance and is free for non-commercial use and it works great both ways. And it allows control over the other system instead of simply consider.

• Error: "connection denied, mechanism of connection not allowed, contact your administrator."

  Hello friends,

  I m trying to configure an anyconnect on my ASA 5555 and when I try to connect in the anyconnect client, I receive the message: "denied connection, mechanism of connection not allowed, contact your administrator."

  I try the search on the web site of Cisco and the solution was:

  This error message occurs mainly because of configuration problems that are improper or incomplete configuration. Check the configuration and make sure that it is necessary to solve the problem.

  As you can see, didn t help me. I know that there is something wrong, I Don t junt know not what.

  Thank you

  Marcio

  Hi Marcio,

  Try adding the following commands:

  tunnel-group VPN_SPO_ARTERIS webvpn-attributes

  Group-alias VPN_SPO_ARTERIS

  Then test the connection.

• Curve 8320 java.io.IOException: connection not writable

  Hey guys,.

  Does anyone know of specific problems with the connections involving 8320 to the images? It seems to me this error:

  java.io.IOException: connection not writable

  When I try to upload an image. I know that the code is correct, because I got it runnning on the 8830, 8900, 9000 and 9530.

  Anyone know of a particular way of dealing with that on this version?

  Thanks for your help and your time

  EDIT: It is also worth noting that I have a series of other connections to Web pages using the formats the https and http which work perfectly well with the 8320. It only occurs with the download of images.

  Apparently he has developed before, for example,

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=16200

  You can view the code? At least that anyone happen to know of a bug that would cause this, at least consider a timing

  or weird problem because they may appear only in certain configurations.

• Once the Interactive connection: not display last user name has been applied is it possible to reverse the trend. I want a few users to see their user names.

  Once the Interactive connection: not display last user name has been applied is it possible to reverse the trend. I want a few users to see their user names.

  Initially, it was setup for the security but now a few users need to see who's online before.

  Help, please

  Hello

  Thank you for contacting Microsoft Answers.

  You do the following:

  1. click on start.
  2. type: secpol.msc and press ENTER.
  3. go to local security policies / adjustment / security options.
  4. on the right side to find Interactive logon: do not display last user name and change to turn it OFF.

  If the issue is not resolved, answer here.