HP Envy 120 do not print

Similar Questions

• HP Envy 120: Does not print to iPad or iPhone.

  Fortunately I've been printing from my iPhone and iPad for the last 6 months. All of a sudden today, I am unable to do so. When I get to 'select printer' on the options of the printer, I get a message saying "no printer found AirPrint. I turned the printer market. I unplugged and reconnect to the WiFi devices and printers. It is usually so straight forward, I want to just print an e-mail! Please help me solve this problem. Thank you.

  Hey @Mossy284,

  Welcome to the Forum from HP Support.

  I see that you are unable to print via AirPrint with your ENVY 120 HP e-all-in-one printer.  I would like to help.

  You have confirmed that your printer is connected to your wireless network?  Note that AirPrint will not work if for example your printer connected to a network of comments and the iPhone or the iPad is connected to your main network.  Button on the front panel of the printer the wireless icon and make sure that it is connected and displays an IP address.  If this isn't the case, run the Wireless Setup Wizard to restore connectivity.  If you are connected, but find that AirPrint works always do not, powercycle your equipment as explained below:

• HP ENVY 4504: HP ENVY 4504 does not print black ink even with full cartridge

  Used by my office printer is not printing black ink. It does not, it is out of black ink, but anything on a page I print requiring black ink is absent. I checked the cartridge to see if she had missed and the printer was not to tell me, but she didn't. I also tried to put in a new black ink cartridge, but it wouldn't print black to help anyone.

  There is no problem with color printing and the problem started only today. The black cartridge is certainly compatible with this printer as it had been good working with it so far.

  We bought this printer less than a year ago now.

  Until outside to change the cartridges I also turned the printer off and on again, but neither helped.

  I would appreciate greatly any assistance that we currently only this one printer at the office and we rely on it for a lot of work.

  Thank you very much.

  Try here.

  http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5368526/document/c03768188/

  Ink cartridge information after doing all the recommendations of HP:

  Once you check the vents turn the cartridge and check the underside near the opening of the ink.  They can be of four plastic tabs near the opening are resurrected.  Make sure that the raised tabs are removed and made flush with the body of the cell.  This will cause the cartridge do not do sit properly in all of the print head and cause air that are expected.  This will affect especially the black ink cartridge.

  In particular, let us know if you find the above to be true.

• My HP ENVY 4500 does not print

  I recently bought a HP ENVY 4500 printer I it connected wireless through e-print HP, but it does not print any PDF files or documents web page, it would only print Microsoft Office documents. I tried to manually connect via USB, but it does not print anything, it just says: queue when I check on my Active printers the print job disappears as if its been printed.

  Any help on this would be greatly appreciated.

  Hi there, I should have asked you to confirm if you try to print from a mobile device (smartphone or Tablet) or a laptop/Macbook computer.

  If it's the former, take a look at this support document covering start with ePrint to your wish of 4500

  http://support.HP.com/us-en/document/c03721293

  If it's the last one here is a link to some troubleshooting steps for issues that you may experience when you try to print wireless

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

  Post back after you have reviewed the information and let me know how you get.

  Best.

• HP Envy 7645: HP Envy 7645 does not print after installation (Windows 8 64-bit)

  I have a weird problem with the HP Envy 7645. After going through the movements to print anything, documents word to pages web, the printer does not print the document and somehow work not even end in the windows print queue. I ran all the diagnosis of HP and there is no connectivity problem, be it wireless or USB connected. No one else in my family have printing problems (we use XP, use another 8.1 and a mac user). The printer prints a test page and a page of diagnosis of the HP software, but will fail to print a windows test page 8. Also the windows 8 printer troubleshooting tool detects any problems with the printer. I'm a bit of a loss.

  I saw a similar question on these cards with the HP Envy 5530 and wonder if it should be the same solution. However, after watching this Board, it requires the name change of a different .dll extension that I don't see with the 7645, but I was wondering if it could be something similar. Has anyone else encountered this problem?

  UPDATE: I solved the problem yesterday, but not by the above method, I had tried earlier. I tried a solution for the 5530 envy and it worked. I completed all the steps, including get adobe flash. Only, I have encountered a problem and has been updated to adobe flash. It would download, but as soon as it starts to install, I get a message: "this user has not sufficiently privleges." If you get this error, I'll post the links I used to solve the problem below the solution. I do not guarantee they will work, but they did for me. If not, just follow the step by step solution below:

  EDIT: I forgot to mention that, before using the links to solve the problem of permission with adobe, I had created another account to administrator in Windows 8 and activate the default Administrator account, which is hidden. None of these solutions had solved the problem, but you can try these first, despite the fact that the difficulty of a temp.

  ___________________________________________________________________________________________________

  Sunshyn2005

• 7640 ENVY: ENVY 7640 does not print the test page

  The printer test page will not print.

  I reinstalled several times print driver and lost countless hours trying to solve this problem.

  HP trouble shooting game software didn't say he cannot solve the problem, the troubleshooter in microsoft is not a problem.  I followed the recommendations of this link:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/HP-envy-5530-won-t-print/TD-p/3510285

  I also tried all the recommendations in this link:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/envy-7640-won-t-print-anything-except-...

  Same results.  I can get the diagnostic report to print from my computer, I can scan, but do not print.

  I got the latest installer: EN7640_117, I used all HP diags who say that they solve it.

  What is the next step?  I'm about to throw this printer out the window!

  I was able to solve the problem.

  Returns the printer in the store that I've gained since.

  Went to another bank and purchased and EPSON.

  Unboxing, put in place and was printing within 15 minutes.

  Should have done a week ago.

  HP I will never buy one of your printer products!

• HP ENVY 4500 does not print a PDF file

  I have Win7 HP laptop HP ENVY 4500 all-in-One printer wireless and iMac OS X 10.9.1 desktop. It prints all good document file formats, except a PDF file. When I try to print a page of a PDF doc't, via Adobe Reader (11.0.07), it prints 6 equidistant tiny portions of the original PDF page on a single sheet. All six parties are in the same area of the upper quadrant of the original PDF page. I tried many portrait, landscape and size configurations, but in vain. It will not print PDF of my iMac and PC browsers files. I've uninstalled and reinstalled the printer and its driver a couple of times. It installs OK without error messages, but it will not print PDF. Also, I don't get any error messages when I try to print a PDF file. I don't see any documentation supplied with the printer printer to say that this HP all-in-one cannot print PDF doc'ts, and it seems to me that it would print a PDF file until several weeks ago. Please notify.

  I was finally able to print PDF files. But it's been so long ago because it was fixed that I don't even remember what was the solution. But four possibilities come to mind: (1) is of course the "print as image file" option has been activated; (2) re-installed printer driver; (3) re-installed Acrobat Reader and ensured that browser and extensions of processing of s/w, if any, have been correctly selected for my printer. (4) corrected a wrong paper, the type, quality, or size option layout which may have resulted in a page layout or a different format from what should be the 'standard' to a PDF file. Sorry I can't be more specific than that. But if I have to determine exactly what I could do to get PDF printing to work properly, I will go straight to you. BTW, I certainly don't rely on an intermediate file conversion service or s/w to transfer my PDF files to a printable format. I hope this helps.

• HP Envy 7640: HP Envy 7640 will not print photos from the photo tray

  I bought a HP Envy 7640 today, 11/05/2016.  It will NOT print photos from the photo tray.   The printer has paper in all trays, but keep taking 8 1/2 x 11 paper rather than photo paper.  I use the default application for the display of pictures (Microsoft Office 2010) and have tried selecting both the 4x6in of the index card. and sizes of 4 x 6/10 x 15 cm.  The end result is the same, an image printed in the middle of the plain paper.  I searched the forums and found that two related threads.  Given that I just install the printer today, I figure there will be newer drivers in the last hour, so I finished downloading "printing HP and Scan doctor."  He finds a "Match of Port issue" and that fixed it, but when I printed another picture, he was still on plain paper.  If I remove the paper and leave only in photo paper, the printer throws a fit and said that it is out of paper.  Any ideas?  I'm not a newbie, but in more than 20 years of use of HP products, this is the first time that I had to fill out a problem for a Board of Directors.  (And with the instant the ink program, it starts to accumulate the number of my printing without a single success.)

  RESOLVED - photo, once you select the printer & paper, you must go into OPTIONS, then the properties of the printer, then go to the paper/quality tab, then the paper Source and select manually the specific bac (bac/Photo main tray).  Sheesh, should we not automatic as soon as you select the paper size?

• HP Envy 7640: HP Envy 7640 does not print colours, envelopes or labels

  My Hp Envy 7640 is only a little over one year old.  Last month, it stopped printing color. I tried to install two new cartridges HP... nothing helps, it does not color print and he always tells me that the ink level is low.  I am also unable to print envelopes and labels.  Even if I could print previously.  I can print a page of the internet or word or pages, but only in black ink.

  I use the wireless printer and my Mac OSZ10.11.2 El Capitan.

  I tried to clean the print head, printer re-aligh, changed the cartridges... I am at a loss of what to do next.

  Can someone help me please?

  Hello! Welcome to the community of HP @LDZ1

  I saw your post on the printing color ink is no longer and I wanted to drop in with my own suggestions. As it appears you have tried most of the steps in solving this problem, please visit the link below and try measures that have not been made. If the color still not print, contact HP to see on a replacement or to trade in the printer.

  HP printers - color or black ink prints do not

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP Envy 4500: URGENT - HP Envy 4500 does not print with only a black cartridge

  Hello

  My HP Envy 4500 will not be black and white print with just the black cartridge. I want to use the color cartridge, which is almost empty. Result: my pages get printed in a greenish color. I can't select the option "only use black cartridge" in the print option either (it is disabled). I tried to delete the printer and re - install again but it doesn't change anything. I use a Mac with os x 10.6.

  I need to print important documents quickly, so any quick help is more than welcome!

  Thank you

  Gunther

  Use single-cartridge use the HP ENVY 4500 series with only one cartridge.

  Mode single-cartridge begins when an ink cartridge is removed from the distribution of ink cartridges.

• Envy 4500: Envy 4500 does not print right

  I have and HP Envy 4500 for a month that she was fine, then all of a sudden I tried to print and no matter what I print from a site is now not printing right.  I tried to re-align the book to help... I ran a printer status report, but it has not released correctly.  I know there is a problem, but don't know how to fix... Please help.

  Can you be more specific in the description of what happens when you try to print?

  In general, the following link contains the print quality issues.  Only the where I would start, but it would be helpful to understand what the print pages look like.  Click on the link to see if one of the solutioins on this page could help describe what happens when you try to print.  Your solution may be on this page, if it's a matter of print quality.

  Print quality troubleshooting

• HP Envy 4500 does not print all pages

  I just bought a HP Envy 4500 e-all-in-one printer and tried to print photos from my MacBook Pro (Mountain Lion OS X 10.9 (13 A 603)). For some reason any, that it will print the first photograph, then my Mac says it's printing the rest, but they do not print.

  Can I do to recitfy this? I have it installed correctly?

  Very confused.

  Hi jeandiarra1956,

  Thanks for the very quick response.

  I was talking with some of my colleagues and we would like you to try the following steps.  Once you have completed the steps please try again to print from iPhoto.

  (1) Please reset your printing system, I have included a document on how to do it. Please be aware that this reset deletes all print settings and pending print jobs from your Mac.

  (2) in the "printers and scanners' click on the '+' and select 'Add another printer or scanner' options

  

  (3) select your desire 4500 and at the bottom where it says "USE:" Please change to the Envy of HP Photosmart series.

  

• 4509 envy: Envy 4500 will not print black

  My printer does not print black. Print color. New cartridge is still no black.

  Dear customer.

  I understand that you are experiencing problems printing black (mono).

  Could you try t clean print head?

  Solution 4: use a tool automated to clean the print head

  Follow these steps to perform an automated tool to clean the print head.

• want to 4500: hp envy 4500 does not print

  I just purchased a 4500 desire and implemented successfully, but I can't print anything that is not internal. I can copy, print a page of report and analysis, but I can not print a word document as the screen gets stuck on printing now and for always loads. I have tried both wireless and usb cable. I ran the program doctor's diagnosis and reinstalled the latest hp drivers. I also restarted the spooler. I tried everything I found on these forums, but I can't make it work.

  Hello

  Lets try to use the generic drivers and see if it helps.

  (if the printer is connected with USB)

  Click START > device and printer > add a printer > add a local printer >

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

  OR

  (if the printer is networked)

  Click START > device and printer > add a printer > add a local printer > choose "Create a new Port" > type in the printer IP address click NEXT, in the manufacture of the list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

  Now try printing.

• HP Envy 110 is not printing/scanning after new driver for OSX Maverick

  Installed the new driver for the operating system MAC OSX 10.9.4.  After installation, I can not print or scan wireless even if the screen of the printer indicates that it is connected to the network from my computer.

  When you try to print, repeatedly get an error message "Cannot find printer.   Strangely, if I turn printer on, and besides, the page is printed.  This continues to happen whenever I try to print.

  In addition, I can scan only the computer.  If I try to scan directly from the printer, I get the following error message: "make sure that your HP printer software is installed.

  I have installed and reinstalled the new driver several times to nothing does not.  I also rebooted both my computer and my network without success.

  Does anyone else have this problem?

  Hi Melnee ,

  What you have described, it is clear that a disconnect occurs on the side of the router, maybe a problem with the ports.  I recommend you only to contact the manufacturer of your router, as to resolve any problems that occur in the router.

  Please hold me.