HP officejet pro l7780 all in a problem of scanning windows 7 64 bit

Similar Questions

• Installation of the HP Officejet Pro L7780 all-in-One

  HP Officejet Pro L7780 all-in-One

  Windows 7 64 bit

  Hi, I have downloaded software from HP in order to install my printer. For some reason any installation fails and I would really like to help. Step by step of my installation procedure->

  I run the program "to add a series of all-in-one Officejet Pro unit

  I chose the wireless connection

  The program runs and find a printer 'Officejet Pro L7700' I select it and click Next

  He runs the installation for 5-10 seconds, and then it says that the printer was not complete.

  I ran the install several times (also after restart the printer and the computer) moved always

  The connection of printers is configured properly, to the best of my knowledge.

  It also print documents computer wireless. My problem is that I can't scan a document to your computer. When I choose the scan of the computer, it tells me that there is no scanning settings.

  I have no idea what to do...

  Hi RazorkillerC,

  You can scan from the HP software successfully?

  1. open the Solution Center, and then select settings

  2. select scan settings

  3. delete the shortcuts on the right side

  4. click on the device to update, and then close the scan window

  5. open again the scan window

  6. add shortcuts on the left side to the right side

  7. click on the device to update

  8. try scan from the front panel of the printer

  

• OfficeJet pro L7780 all-in-one: full functionality of the driver and the software crashes to configure product.

  Windows Home Premium 64 bit operating system. Download full feature software and driver and follow the installation instructions. All software and drivers seemed to install but at the last stage (configure the product), it crashes after a few minutes and a fatal exception message (no error number). After this, uninstall all the software.  I took the following troubleshooting steps:

  Disabled all the normal startup items and services (except Microsoft) in MSCONFIG. As an administrator, and under Vista compatibility also led installation.  In addition, tried a basic installation.  My computer is a Dell PHE 8500 and is wireless. I tried installing several times in respect of the connection of the USB cable directly and wireless, but all had the same result. Completed all the steps except the last where the fatal error message appears after a few minutes.  Help

  Thought I would give it another chance: I've done the following:

  Ran L4uninstall.bat

  American ran Care System: registry clean and disk cleanup

  Connected accessories/tools disk cleaning system

  Restarted

  Insured that lates version of Adobe Flash Player has been installed

  Latest version of the software downloaded to the printer

  Went into MSCONFIG unchecked load startup under selected startup items checked "Hide all Microsoft Services" and disabled the rest of services under services,

  Restarted

  A ran another check of the register with the American healthcare system

  Ran disk clean again

  Off DSL modem

  Firewall and AntiVirus disabled Norton

  Restarted

  At installation of the printer as follows: first of all installed drivers

  Restarted

  A ran the remaining printer one by one with Solution Center last softerware

  Restarted

  Is surprised that Solution Center has worked without problem

• can not find printer to computer hp officejet pro L7780 all-in-one

  I recently tried to print and my printer can not be found that I don't have the disk that's come with the printer, it is lost and he always tells me that it cannot find a printer

  What operating system?

  Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en&os=4063&product=4083977&sw_lang=

  What did he say?

• Officejet Pro L7780 print head error

  I have a Officejet Pro L7780 all-in-one. Recently, it does not work due to a print head error (printhead missing or damaged M/C). Help, please.  Thank you very much.

  Hello

  Use the following link to complete the troubleshooting steps.

  http://support.HP.com/us-en/document/c01446637

  If you still receive the error message after you perform the steps in troubleshooting mentioned in the document, then try cleaning print head in the printer menu.

  Installation Menu - Tools - cleaning print head

  Configure the Menu - Tools - align printer.

  If none of these help then try this reset... This reset will restore the printer to its factory settings & will clear all the settings of the printer.

  Unplug the cord from the back of the printer while the printer is always enabled.

  Now hold "# & 9 ' buttons on the printer and connect the power chords while pressing the 2 keys. Wait 10 seconds, then release the keys.

  If the printer turns off automatically, then wait for 10secs. and then turn on the printer using the power button on the printer.

  I hope this helps.

• HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

  HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

  I DO NOT PRINT A LOT AND I HAVE TWO PRINTERS. THE EXPIRATION DATE ON THE CARTRIDGE, THE PRINTER DOSE NOT LET ME PRINT. I KNOW THAT THERE IS WAY TO OVERRIDE THIS PROBLEM, BECAUSE ON MY PREVIOUS PRINTER THEY REPLACES THE KEY.

  The error message itself will remain but will continue to print. This message will remain until the cartridge is replaced. Substitution is the printer printing always regardless of the error message on the display screen.

• All-in-one Officejet Pro L7780: driver HP Officejet Pro L7780 will not install with Windows 10

  Recently, my HP Officejet Pro L7780 stopped printing. I uninstalled the driver and then reinstalled the driver from the HP website. Every time, when installing, I get a message that "bing bar does not work on this version of Windows. Once the installation is complete, the test page is fine but I can't print from one of the applications (e.g., WORD, Adobe Acrobat, etc.), getting an "Error printing" message, rather than each time.

  I use Windows 10. The printer was working fine since I've upgraded to Windows 10 until recently.

  I've uninstalled and reinstalled the driver several times as suggested on the HP website. Any suggestions on how to solve this problem.

  Thank you.

  Hello @AMNYC2015and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having errors in the print driver. I would like to help!

  I recommend to remove the cartridges ink and starting by a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend running the HP Print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. If this solves the problem, click on accept the Solution below, as well as others to find the answer.

  Thanks for posting on the HP Forums!

• All-in-one printer, HP Officejet Pro L7780

  I set up my HP OfficeJet Pro L7780 with the power supply to a power strip. I used the power strip to turn off the printer ON / OFF.  After several days I couldn't turn the printer ON / OFF using the power switch. I also lost all the functions of the printer. I found later that I had only used IT? SWITCH the printer only. Is there a remedy for this situation?

  Hello BPLRET,

  Welcome to the Forums of HP Support!

  It is not suggested to use a power strip or the printer power surge protector OR turn the market with. When the printer is turned off with the key, it allows to do maintenance, cleaning, etc., the time of printer.

  It is possible that the printer has been damaged by doing so. It would be better to connect the printer to a socket directly and see if it retrieves the printer.

  Questions when it is connected to an uninterruptible power supply/Strip/surge protector power.

  When you try to print, scan or copy what happens?

• HP Officejet Pro L7780: HP Officejet Pro L7780 Solution Center does not work even though I can print

  Last week, Solution Center of my printer HP Officejet Pro L7780 stopped working, even though I can still print directly from applications. But I can't use the scan feature. I uninstalled and reinstalled the driver full several times (after uninstalling using uninstall_L4, cold restarted the printer, remove the DigitalImaging registry key and delete all the files in %Temp%). The re - install seems to be okay except that when I try to open the solution Center, it happens nothing except sound.

  Any ideas how to solve this problem?

  Thank you.

  Hello

  Thank you for using the forum.

  You can find the solution here:

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/HP-Solution-Center-fails-to-launch-cannot-...

  Find the relevant video below that shows you how to "uninstall Windows 10 updates" and also "Hide updated" to prevent Windows to install the update in the future!

  Windows 10 - How to uninstall & hide updates

  https://goo.GL/3tWxyA

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• OfficeJet Pro L7780: HP Solution Center

  I see I'm not the only one having this problem since the day of security Windows on Janualy 4, 2016. I executed issued alerts here to support.
  Basically what happens is that I can open the Solution Center, but when I try to open either Photo or Document scan I get a gray pop saying "The HP Imaging Device was not Found" it tells you so what do I do, but all of these steps have failed.

  I noticed something is in the Device Manager, devices for imaging and printers, Officejet Pro L7700 under events, I also have this message.
  Devies Imaging ' device USB\VID_03F0 & PID_2312 & MI_00\6 & 36fd2d51 & one & 0000 also requires installation. »
  Printers 'device USBPRINT\HPOfficejet_Pro_L7700\7 & 30237294 & 1 & USB001 requires installation."

  I'm a complete novice, but for me the finger seems to be pointing to my USB drivers or control. Anyone have any ideas?

  Perhaps I should mention the printer works fine

  Thank you.

  Hi @Knocklong44,

  Welcome to the HP Forums!

  I noticed that you are unable to access certain features of your HP, with your HP Officejet pro L7780 printer solution Center. I'm happy to help with this problem!

  Please, try the following steps:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows. (Expect that the software will ask you to connect the printer USB cable.)

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope these steps help!

• Solution Center does not work under Windows 7 with Officejet Pro L7780

  Downloaded the latest version of the software for Windows 7 and the first issue was when you try to do an installation complete you get a fatal error at the 96 percent mark when she did the configuration. I looked on the web and found a lot of posts on the same problem. Then, I just uninstalled and made a gradual installation.

  Main printer DRIVER installed first. Then did the functions of imaging followed by the solution Center device.

  Installed everything, but when you run the solution center it says it can't open because incomplete installation.

  The printer works from Windows 7.

  I have an XP machine and Solution Center working on it.

  Any suggestions anyone.

  This thread has resolved the problem installing the software that supports the HP Officejet Pro l7780 for use on Windows 7.

  The event viewer showed mistakes that network location for %APPDATA%\protector.exe is not found.

  Even if I couldn't run the original installation of solutioncenter.msi to work without errors in the log file, without making any changes, which has not completely solved the problem.

  Since solutioncenter, initially did not work, I decided to run solutioncenter.msi manually and look at the log file. See errors in the log file we made changes to the database with Orca solutioncenter.msi. It took us on a long road that does not initially sense that HP would put something out there that produced errors in the msi log file.

  I don't know how the setup.exe uses solutioncenter.msi?

  The changes that doesn't seem it to matter when you run the setup.exe file that is provided in the download.

  If I used the modified solutioncenter.msi or version orginal of it as downloaded from HP running setup.exe site had no importance regarding obtaining solutioncenter work in windows 7, canceled only changes in the solutioncenter log file errors.

  I had to make the following changes to the environment variables to get the full package to work, but what is strange is that I could replace the changeed solutioncenter.msi or the original solutioncenter.msi and run setup.exe, with the following environment changes didn't matter. The solution Center has worked in Windows 7 using one of the solutioncenter.exe and setup.exe.

  Apparently, setup.exe does not use the MSI directely. I think that HP responses suggested that in a previous thread.

  Add these entries (click new...) for the owner user variables and System variables:

  In the name box: APPDATA

  In the value box: %USERPROFILE%\AppData\Roaming

   

  Run setup.exe and event viewer does not display % APPDATA % Scriptures and all work.
  

   

  Thanks for all help on this.
  

• OfficeJet Pro L7780: Officejet Pro L7780 missing of the vertical lines on text & photos

  Everything that I try to print has lack of vertical lines, text or photos. Happens if I print from my computer or if I try to copy a page directly to the printer. I went through the troubleshooting page full... the ink is all well heads, all good impression. Whenever I try to run a printer align it does not end the page. Whenever I have nothing he's trying to align printer print when its done & still cannot print the entire page. Gives me an error and says to check my documataion. I checked the book with my printer & there is nothing in this whole problem.

  Help, please!

  Hi @LockGal,

  Welcome to the Forums of HP Support!

  I see that you are having problems with your HP Officejet Pro L7780 printer aligning and printing vertical lines. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration that this must be for you. Looks like there are two separate issues. When the printer clean print heads and not properly align itself, this indicates that there is a problem with the cartridge, the print head or the line break. For vertical lines, it is usually independent for cartridges and print heads (not being is not a print quality problem). The paper type and print settings might be the problem.

  To help determine the cause have you used this document: troubleshoot print quality HP Officejet Pro L7500, L7600, and L7700 all-in-One Printer Series?

  Use the document in the order will help you determine if the print heads need to be replaced. If so, please contact HP.

  Please confirm that the vertical or horizontal lines?

  NOTE: are not replace the cartridges and printheads for vertical streaks in a print. Instead, check the paper as directed earlier in this document, or search for a document that addresses this issue. Vertical streaks on copies can often be fixed by cleaning the scanner glass.

  • L7300 of HP Officejet Pro L7500, L7600 and series L7700 each - vertical stripes, lines or streaks on Copies, faxes or scan

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Officejet Pro L7780 - registration issue

  I downloaded and installed the complete software for the HP Officejet Pro L7780.  When the software asks you to be registered and I put in the printer and the search comes back 0.  I tried the name and number of the product and always keep the same result 0.  When I hit enter, the recording goes, and I have this running on my computer.  I can't do fill.  Please tell me that there is a simple solution to this.  Thank you

  

  I solved the problem by putting an end to a process and all is good with the world.

• HP Officejet Pro L7780 black ink don't print, color fine printing

  My HP Officejet Pro L7780 is not printing black ink.  He began to 'jump' then it completely stopped printing black.  I have replaced the black today cartridge, cleaned the printheads several times and always, it prints a slight shadow or nothing at all.  Any help would be greatly appreciated!  Thank you!

  Hey TC,.

  There are several troubleshooting steps that may help solve this problem. Symptoms could include striations or discolouration, lack of black or other colors, text Blur/Blur, and the ink bleed. Please click the link below for detailed instructions:

  Troubleshooting print quality problems

• HP Officejet Pro L7780 - network letter nightmare!

  Hello.

  I'm hopin that someone can help with a problem I have with my HP Officejet Pro L7780:

  The printer is connected to my wireless network and all is fine with that. The problem lies in the letter from the network that it sets itself on my PC (Windows 7 Ultimate) for the card reader on the printer. It uses the same letter as a virtual cd-rom on my PC drive - and I would like the letter use printer - and not the cd-rom drive, as I have my PC configuration in a way where are grouped different types of readers. Is it possible (possibly via the Windows registry) that would allow me to change the drive letter of the network (as it seems to automatically assign them one) and keep it with this new letter rather that interfere with the cd-rom drive and denying access to him every time that Windows 7 starts?

  Or otherwise disabling the function of card reader on the printer I do not use it?

  Thanks to anyone who can solve this - it's driving me crazy!

  I finally found a solution to this problem that works for me.

  I too have an HP printer that was mapping its card slots memory on drive Z: every time I start my Windows 7 computer.

  To change the map to another letter in order to release the letter Z:, I put a memory card in the printer memory card slots. I then unplugged the drive Z: printers mapping (right-click the Z: drive in Windows Explorer and choose the option to logout).

  I then used the "Map network drive" option on the toolbar of Windows Explorer to map the slot for memory card printer to a different drive letter. [You must know the address (or network name) of the printer to do this: name or network \\[printer address] \memory_card (e.g.: \\192.168.1.108\memory_card). This address goes in the 'Folder' dialog to map text box. Make sure that the option "Reconnect at logon" is checked. And make sure you only select a new drive letter that is not necessary for any other thing later. Then click "Finish."

  After doing this, the printer has continued to use the new drive letter to start instead of Z:, leaving Z: free for other applications.

  I do not think that works above if there is no memory card in one of the printer memory card slots.