5W charger constantly flashing power switch every second back

Similar Questions

• Re: Satellite L500 - fan power switch every 5-10 seconds

  Hello

  I have a new Toshiba satellite L500 1XX with i3 and I installed the 32 bit OS.
  Starting from the first start, the fan is acting strange every 5-10 seconds it started working for 5-10 seconds then stops for 5 to 10 seconds, then again, who's going all the time even if the flurry of the laptop stand out with something.
  I think that something is wrong, but was not able to find it. Please I need help
  Thank you

  Hello

  That's ok with your laptop. My satellite that a500 is also like that, even if I surf the Internet, watch movie and CPU shows only 5%. I don't play all the games. It didn't because of the dust because I clean it regularly, installed all the drivers, BIOS updated. The only way to make it quieter to run the fan at a constant speed as 54%, I simply load the CPU with some applications that maintains fan runs almost every time and not boring perceptible noise.
  You can play with the power settings in the power management, but in my case it does not help. And do not decide yet upgrade the Bios, it don't improve you but can kill your knees so wrong.

  Bazlaha, ahi!

• My HP Pavilion starts in Preset Mode and the sign flashes every second

  When I start the computer the next sign appears:

  Mode Info - 48.4 KHz / 60. OHz - 1024 x 768 - PRE-SELECTION MODE.

  The sign is flashing every second and doesn't go away.  I'm unable to log in because the sign covered the opening of session space programs.

  Definition of a restore point has not solved the problem. Help!

  Hello S.JColcombe,

  When you start your computer you are able to see your Windows operating system boot, before the screen flickers with the information you provided above?

  I suggest you to check the connection between the computer and the monitor. Or is it a laptop?

  http://support.Microsoft.com/kb/555375

  Thank you

  James

• power switch flashes by intermittent but pavilion m1270 desktop don't dΘmarre

  Hello everyone

  yesterday, I met the same problem, I had 2 years ago. The power of my office pavilion m1270 switch started flashing intermittently, but each start attempt failed. I had this problem also 2 years ago, then I opened the computer and cleaned. He was then apparently resolved, but only if I disconnect the electricity Office, IE I could turn off the sessions but it was preferable to not draw power (cable) in the case of going on holiday for example. If that happened, so I had to start pushing the power switch of the dozens of times until I got lucky and he started upward. But since yesterday it turn on at all. With the power cable plugged the switch blinks intermittently and pushing you hear 'click', but no start-up. Of course I opened and cleaned but no result

  . . Maybe someone encountered the same problem and found a solution, know that I am not at all technical.

  Kind regards

  Bart Soepenberg

  Zaandam

  the Netherlands

  Problem found!

  I had help expertise neighborhood and now I know that I need to replace the power supply,

  Thanks anyway,

  Bart

• Satellite R830 not working - flashing power light

  Hello

  My Satallite R830 lights.

  The power symbol flashes orange 8 times then pauses and restarts. There are 6 quick flashes followed by a longer 7 flash then another quick. The symbol wireless is lit (orange) all the time.

  If I unplug the laptop and remove the battery and hold the restart button for 30 seconds then without taking the battery in the charger stops flashing and the symbol of the power goes to green, until I try to turn it on, it has a fraction of a second where it looks like it is starting then stops and flashing orange again.

  Same thing if I unplug the AC adapter and the battery and then tried the above, but with battery or ac charger.

  I tried with another adapter (same output amp and volt).

  Can anyone help?

  Thank you very much

  Post edited by: sivyer2081

  > 6 quick flashes followed a longer flash 7 and then another a quick

  If the power supply microcontroller has detected an error lamp DC IN sends a blink code.
  The short means 0 and a long time means 1.
  I have your case, that means: 0000 0010

  Because the error code starts with LSB (least significant bit) to read it from behind
  -> 0100 0000 0000 0010-> 40 H (hex)
  Now, you will need to know what means 40 H

  After a few details that I found on the internet, the 40 H could be the fault of S3V output. (S3V voltage is more 3.47V)

  However, such errors are mainly related to the problem of the motherboard (internal circuit problem) and from my point of view of the party only a few replacement may fix this error.

• Acer Aspire S7-392 lights flashing power led

  Yesterday when I tried turing my S7 on it would not turn. Power led kept flashing. so I plugged it to think of HQ, there lack of battery, but the result was the same.

  After reading some post online I reset the battery, he turned. I quickly took my working backup because it could happen again. And today it turned out I was right.

  I've tried so far things:

  • reset the battery from the back.
  • removing the battery from the inside and with the power for 30 seconds
  • FN + f12. does not not, as soon as the key is pressed, it begins to blinkg
  • read a few post on flashing the bios coundn't find the right way for s7-392 so tried of s7 - 391. bios donwloaded. It extracts. copied to USB. held fn + ESC and then turn it on. did not work as soon as you press power button / stop led continues to Flash

  I tried it didn't work. I decided its time I put it in the trash. The thing has been in and out of the repair shop, over 2 years. I never had cell phone that easily beat without fault of the user.

  Did you know that the first time, I bought this 3 weeks speakers stopped working. After 2 months, every time I turn it on it disk check-up. and all died within 6 months. It was under warranty so he sent to acer repair workshop. He come back every thing worked initially. but in the first enclosure week has stopped working again with 1 usb port. within two years, I've had it already spent enough for a new ultrabook.

  Even though my friends said acer is not a well, the thing seemed so nice, so bought some anyway. I learned my lesson will never buy an acer product.

• Satellite A300-1IW: HARD drive access light blinks every second

  Hello everyone, and sorry for the English, I'm french :)

  I bought a Satellite A300-1IW a few days and suddenly (don't remember exactly when) early light access HARD drive blinks every second and it continues even after several reboots!

  It does so only with Vista; I checked the disk with 'diskmon' activity and I saw that even if it was * no. * disk * written * or * reading * the led continues flashing, so I think that it is not bound to certain services of vista (superfetch, indexing...)

  A similar problem, I saw on a Microsoft support, but it was under windows 98 and with old motherborads!
  See: link: [http://support.microsoft.com/kb/138598]

  So it seems that it is related to level Vista SCSI or DVD...

  I have now is not critical, but it's annoying to have this led flashes all the time

  You have an idea? Don't you think that it could be related to bios? I want to be sure before touching it, because it is always tricky.

  Thanks for your help

  In my opinion, nobody can offer no comment because you already gave the answer. There is nothing unusual and certainly no reason to panic.

  What do about it? What you want to do? Sorry, but this is a really stupid question. I can just offer you a stupid answer. ;) Take black tape and curl up the LED. ;)

• Qosmio G50 - HARD drive blinks every second

  Well, if she's here,

  I have a Qosmio G50. I installed WindowXP Pro 64-bit.

  I noticed the hard drive light flashes every second. I spent some time searching the net for a soultion. This led me to download a utility called "process explorer" from microsoft.

  This utility show me that the active process is services.exe. The properties of this service suggest that it handles "eventlog" and 'plugplay '.

  I realize that I can't go to the event log, nor what I want.

  Can anyone help?

  Thanks in advance.

  Hello

  The HDD led always flashes if it read all the data or written to the HARD disk.
  The service.exe (Service Control Manager) belongs to the Windows operating system and it s of Microsoft which is necessary and my knowledge background process, it cannot be disabled.

  Good bye

• PORTEGE T3600CT: Flashing power LED

  Hi everyone (forgive me of my English).
  I have a problem whit my PORTEGE T3600CT (Yes, a bit old... but I like it) when it s connected to the power supply.
  It looks like overheating of the microprocessor or something else: after a few minutes (5, 15, 30... it s never the same) the computer draws downwards, the power led turns amber and flashes 4 times aprox. 5 seconds, and then stays off for 3 seconds. It is the cycle: 4 flashes, broad of 3 seconds, 4 flashes...
  I put t knows what it means, cause I put t have the manual. If anyone knows, please help me.

  Thanks to you all.

  Maximiliano

  Hi Max

  AFAIK, it flashes code. Happens if the power supply microcontroller detects some hardware fault. Please use the virtue and advanced research search terms put the blink code. You can see that there are a lot of topics on this subject. If you wish, you can read some useful comments.

• Gigaframe L80 forget automatic power switch time and brightness settings

  Hello world

  I'm on my second gigaframe l80 and it has just developed the same problem that the first seems default back to factory settings.
  Then he forgets his automatic power switch time and very annoying brightness adjustment!

  Has anyone else had this problem?

  a soon fly

  Hello oozie.

  I also own a Gigaframe L80 and it works very well.
  Have you plugged the permanentely power framework (using the AC adapter)?
  How long does it take, the framework sets the default settings?
  Have you tried "reset" of the image using the small button on the bottom of the frame?

  welcome them

• LifeDrive power switch broken switch

  Help.  My Lifedrive is 4 years old and has worked well for the old technology.  However, the power switch broke.  In other words, it slips easily rather than move the on/off switch and does not have the power or not.  The last position has been LOCKED.  So I can't enter the data.  A soft reset brings to the top of the screen, but the screen has half shaded numbers and does not recongize being touched or tapped.  There seems to be nothing that works.  A hard reset is not possible because the on/off switch does not work.  Most of my data is synced with my computer.  But I did an interview with oral history and voice Memos do not sync for palm desktop.  So my questions are: 1) does anyone know how to activate a locked Lifedrive with a broken switch for power on / off?  (2) someone knows how to retrieve voice memos to a unit in this condition? (3) does anyone know how to fix a switch broke on a palmOne Lifedrive?  Really hope someone can help.

  

  This is what it looks like after removing the plastic shell.  The piezoelectric speaker is attached to the plastic shell.

  

  Disconnect the battery from the motherboard.  I use a small Flathead screwdriver to separate the connectors softly.

  

  Remove the battery disconnected.

  Write it now, numbers 1 to 4 on the pieces of blue plastic that supports the microdrive; in this way, you won't get lost as all back you together.

  

  The microdrive is connected to the interface of CF. There is a sticker of warning placed on the lower part of the microdrive and interface see cut carefully through the sticker between the CF card and the microdrive with the tip of the knife.  Gently, remove the microdrive from the CF interface with a flat head screw metal or equivalent.

  
  Now the microdrive (in my case, a memory of 32 GB compact flash) is half disconnected from the interface CF.  Continue, making sure not to damage the delicate pins.

  

  Congratulations!  Completely unplugged.

  

  Remove the microdrive (or CF memory).

  

  Disconnect the cable of the microphone of the motherboard in the same way you did to speaker wires.

  

  Unplug the connector for cable film gently with a plastic or equivalent flat head screw.

  You don't want to have cables delicate film cut by accident, so be careful.

  

  Unplug the connector for a another movie cable gently with a plastic or equivalent flat head screw.

  

  Remove the two very short torx screws.

  

  Finally, the motherboard is thrown, and you can see what happened to the switch.

  

  The central internal switch at the top of the motherboard has proved to be in the locked position.

  

  One of the two legs of the plastic piece was found to be broken.  The other leg looked ok.

  

  I slipped inside switch to the unlocked position manually.

  

  Another picture of the internal switch.  If the internal switch turns out to be broken, refer to

  http://1src.com/forums/printthread.php?t=121887 and order a new switch from Mouser Electronics, www.mouser.com
  Part number: 688-SSSS7A0101
  Manufacturer part number: SSSS7A0101
  DESC: SP3T W / BACK WINDOWS
  Switches slide ALPS SMD
  RoHS: compatible

  I think that your internal switch is not broken.

  

  Put the motherboard back such as the plastic piece can slide the internal switch to turn on or off position.  Be careful not to break the other leg healthy in this process!

  Put everything back together carefully.  You start your Lifedrive, you will notice that the date and time are the default, put it so well.   Good luck to you!

• HP ProBook 470 G2: Stop slower / flashing power button / stop...

  Hello

  Ive got a G2 HP 470 here with a weird problem, whenever stop you the laptop, you see windows stops, and then the screen goes black (full black, as when it is turned off) but the power button (white) and a orange led near the AC connector Flash like for 10 seconds before the laptop shuts down completely.

  I've updated all the drivers and BIOS.  but without success...

  Battery removed etc, but also without success...

  Someone knows how to fix this or is something broken?

  Best regards

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close open windows and stop the laptop by right clicking on the icon from the Start Menu, select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if she will now disable correctly.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

  Someone help me.

  HP 2000-2D02TU Power LED power switch but the laptop does not start.

  What I'm doing.

  Please help me

  Model No. - HP 2000-2D02TU

  Hello @Alok_Bhai,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the laptop won't start does not and wanted to help you!

  You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

  Computer does not start and emits a LED or beep Code

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Power switch module

  The power switch of my old HP Pavilion a320n PC motherboard has failed.  Someone at - it a source for a new power switch module?

  Thank you... Stony

  Hello

  The SPST momentary switch would have been my first choice.

  If I keep the power switch on my depressed e9280t he powered stops after three seconds.

• Satellite A100-033 - where to get the cable/connector for power switch?

  Hello

  I change the cable/connector for * power switch button * which connect to motherborad. If anyone no where I can get in? I tried at PC world, but they do not have cable, I am looking.

  My laptop SPAC:

  Satellite A100-033 part number: PSAANE-03J02GEN

  Thank you

  Hi rjbuz,

  I can t tell you the part number because I m not the owner of the Satellite A100, but a service provider authorized in your country can do this:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Just give them a call and ask. Maybe they can send you the replacement part. :)