6.2 VSAN with drives of 4 kN and 512th

Similar Questions

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• Re: Cannot start with driver USB Satellite A40-271

  Hello

  I have a Toshiba Satellite A40-271 and there was a problem with windows and I can not start, so I decided to start with linux. I tried once with a cd and it worked perfectly, now I try with a usb flash pen and it does not work.

  Can someone help me?

  Hello

  As far as I know the Satellite A40 is very old model laptop and I think that the BIOS does not support booting from a USB flash memory
  I know it of possible to start the USB FDD drive

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• Dc7800: "display driver igfx stopped responding and was recovered with a success." for Windows7

  Hello

  Dc7800 series systems are in error - "display driver igfx stopped responding and has successfully recovered. Windows 7 "with Windows7 operating system

  The systems provided with Windows Vista and we have later upgraded to Windows 7. Now 2/3 systems many DC7800 systems that we have in our office are showing the above error and the screen turns off for 2/3 seconds. We have reloaded OS but still the problem persits.

  There is no display driver for Windows 7 for DC7800 HP driver/software downloding site. Application of detection of driver of Intel found that this latest version of the driver is installed.

  Ran windows memory diagnostic tool and has not found any error.

  Can anyone help?

  Thank you

  Hello:

  Try this driver for 32 bit OS:

  http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18223&lang=eng&OSVersion=Windows%207%20(32-bit) * & DownloadType = drivers

  Try this driver for the 64 bit OS:

  http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18228&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType = drivers

  Paul

• HP Pavilion P6610f with drive CDDVD TS-H653R disconnects intermittently

  Windows 7 64-bit. My CD-DVD drive will be intermittently connection-disconnection on every 5 seconds.  There is no all the time. But I could play an Audio CD and Windows Media (or iTunes) screen will appear and disappear because it connects disconnects. I can often solve by restarting, but then can happen again. Also, if I start a Cd set and he normally plays and then use my KVM switch to work on my other computer (while listening to CD on this machine), the CD stops and the player disconnects as soon as the USB keyboard/mouse/monitor are disconnected.  I'm used to be able to enjoy music even without KB/mouse needing to be connected all the time.  This happens with the two 11.0.4.4 iTunes or Windows Media player (version 12?)  Yes, have tried several disks.  They are not jumping, it's a Windows SHIFT as the drive letter shows go away and return.

  I'm interested to hear from someone who has actually seen this on a machine and subsequently resolved.

  When I had a bad hard drive, I would advice to the reader 'disconnect' and then come back online. It seems that the CD/DVD drive is going bad and should be replaced. You have another computer to swap the CD/DVD drive with? You have a friend to share with the readers of CD/DVD? I an another CD/DVD drive installation and test for the issue confirm that the issue is indeed a default CD/DVD drive.

  Please send BRAVO

• Windows 7 on a computer with drive SSD C which has now a windows directory of $. ~ bt

  Original title: Geoff

  I run Windows 7 on a computer with drive SSD C which now has a windows directory of $. ~ bt which I don't want.

  I can't remove this directory despite several attempts!

  Please help me remove this unwanted directory as I do a lot of editing video and need all the HP of SSD disk space.

  PS I enjoy Windows 7 and will eventually pass Windows 10, but not again, I thank you.

  This will help you - http://blog.ultimateoutsider.com/2015/08/using-gwx-stopper-to-permanently-remove.html

  Disk Cleanup also removes temporary files created by Windows 10 - but they will only come back unless you stop the process.

• How can I check the toner level in my HP Laserjet 1320 with driver W7?

  Original title: HP Laserjet 1320

  How can I check the toner level in my HP Laserjet 1320 with driver W7?

  You probably can't, HP does not have software win7 / drivers, so you use drivers win7 default, which has all the features of the HP software

• Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

  Original title: recovery of original windows 8

  When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

  Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

  Hello Vishal,

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

  See the suggestions posted by Andre Da Costa replied on March 7, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

  In addition to this, see:

  Product key lost or misplaced (certificate of authenticity) for Windows

  If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

  Hope this information was useful.

• I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  Hello

  You can use the Windows 8 Compatibility Center to find out if a device is compatible.

  Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT:
  http://www.Microsoft.com/en-us/Windows/compatibility/WinRT/CompatCenter/home

  FAQ - Windows Compatibility Center:

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/FAQ

  Concerning

• VBS silent printing won't work with drive X 1

  
  Hello

  For nearly a year I used a VBS script to open and 'silent print' a PDF to the default printer - the script continues to work on machines using drive X but with drive x 1 I see a message saying that the path is not valid

  Set oWsh = CreateObject ("Wscript.Shell")

  oWsh.run ' "" AcroRd32.exe"" / p/h ' & 'C:\MostRecent\MostRecent.pdf",,true '.

  The real message is, 'there was an error opening this document; the file name, volume name, or volume label syntax is incorrect. "

  I can paste the address C:\MostRecent\MostRecent.pdf in windows Explorer and adobe correctly opens the file and I can print it then manually.

  I would point out that this script vbs has worked for a long time before reader X 1 set to day - my client will not consider return to older readers of adobe

  Any ideas or advice from someone?

  Hello

  Thanks for the advice, I have now managed to get this working using the following script... It is good with Adobe Reader X 1 and Adobe Reader DC...

  Set oWsh = CreateObject ("Wscript.Shell")

  «AcroRd32/h/p, C:\MostRecent\MostRecent.pdf",,true» oWsh.run

  Thanks to pseudonymous Test and Bernd Alheit for their advice

• Stretched cluster VSAN with SRM

  Hi Coomunite,

  Stretched cluster VSAN can use replication on Bay?

  Is it for the use of VSANS with MRS?

  Good afternoon, a stretched cluster vSAN is not replication table that can be used with MRS.  He's tense storage which is synchronous and for use in areas without installation at disparate locations.  Thank you, Zach.

• Laboratory VSAN with pizzaboxes with two bays?

  Hello

  I'm slightly older R300 servers Dell that I want to use a laboratory VSAN. Arrange it in two locations of drive and a RAID controller and I want to know if it is possible to use these for such a facility. I plan on keeping a 1 TB SAS drive in a slot and using a smaller SSD in the other, this configuration in a JBOD mode (in other words, doubt the controller supports true JBOD, so guess it'll be 'RAID-0 disk'). As I understand, ESXi must reside somewhere else, then maybe a USB pen drive?

  Is this possible?

  Thank you

  To?

  are there requirements on the size of the hdd/ssd?

  Yes, you need SSD of at least 10% of the size of the HARD disk drives in your disk group. Let's say that your have 1 TB HDD to add in a disk group, to support you need at least 100 GB SSD or more.

  How much space do I need for the root/ESXi?

  8 GB should be enough. If it is USB flash storage, smaller will do. because there will be zero persistent created by default.

• Enterprise 64 Windows 10 10074 to 10130 update fails with drive LSI Paravirtual & View Agent gives BSOD on Ctrl + Alt + Ins\Del

  I continued to try to update version 10074 to 10130 and it would be to start the Recovery Wizard. Starting in Windows it would bring the 0x8024001e error.

  The virtual machine has paravirtual disk controller. I added a second drive SCSI 2:1 and changed this LSI SAS controller and booted up and configured the drive. Then I stop and changed the paravirtual to SAS drive. Then the update was successful. Could be a coincidence, but I tried half a dozen times before.

  Once updated, I changed back to paravirtual and things were fine, at least with a tip upward.

  Trying to connect view Agent 6.0.2 - 2331487 or 6.1.1 - 2769635 were installed results in a BSOD with error DRIVER_IRQL_NOT_LESS_OR_EQUAL (kbdclass.sys). Remove the agent from the view and the Ctrl + Alt + Delete works very well, but now we cannot use view horizon on Windows 10 Tech Preview. So sad.

  

  So sad.

  Post edited by: EricNichols BSOD on Windows 10 10130 with sight agent 6.0.2 +.

  FIX:

  RDP in the box and edit HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E96B-E325-11CE-BFC1-08002BE10318} \UpperFilters put kbdclass before vmkbd