60 d takes his pictures ' own

My 60 d begins to take pictures when I put the plug of the cable into the socket.  Worked fine last time I used it. The remote area is not yet connected to the other end of the cable.  Any ideas?

It seems that your cable is shorted / bad.

I have the Canon version.  I can tell you that the side of the camera is a 2.5 mm stereo headset - but are not sure how far you Vello (or be able to look at it) I don't know what is on the other side.  When I look at their wireless remote "airwave", that looks like it has the same grip on both sides.

In any case, it is a _very_ simply the mechanism.  There are three wires in the cable and the "stereo headset" style has 3 drivers on the pole.

If the shutter button is pressed to half way then the middle and the end further from the tip create a connection.  If the button is pressed completely, then all three create a connection (tip, middle and base of the stem.)

If the stars of the camera triggers the shutter just because you have plugged in, then it means that something leads through all the pins - and given the fact that this does not happen unless the cable is connected, it almost certainly points to a short circuit in the cable.

Replace the cable.  You may need to contact Vello or a store that sells them. They sell actually * just * the cable (without making you buy the remote control set to get one.)  This is because you can buy additional cables for devices that require different types of connectors.

Tags: Canon Camera

Similar Questions

  • I have a canon eos rebel sl1/100 d. I can't take a picture.

    I can't take a picture. The battery works, the memory card has been reformatted. I had the unit about 6 months. I took a lot of pictures on vacation this summer. I uploaded these photos. I started taking pictures, and I can't get a picture.

    If the unit is in 'One Shot' factory default mode, so should not be a picture unless it can confirm that it was able to lock the focus on a subject.  No accent... no picture.

    If, however, you reverse this little switch on the side of your lens that says "AF/MF" on the "MF" position (it is 'Manual' and AF is "Update automatically") THEN you get an exception... "MF" position, the device is ready to take a picture no matter if she thinks that the image is sharp or not... He doesn't care.  Touch that little switch to "MF" you said on camera that YOU will take care of the update and it is not not to consider the development at all.

    If the camera will take a picture (even if it is blurry) when the lens is in a position to "MF", this means the reason why he was not taking a picture before is because of his inability to focus.

    There may be a few reasons why a camera could not focus.

    (1) not enough light: to test this situation... just go to a place where there are a lot of light.  ... Outside in the middle of the day.

    (2) a problem with one of the systems of development.  It turns out that your camera has in fact two systems different focus (completely independent).  One is used when you are looking through the viewfinder to compose the picture.  The other is used if you use the live view screen to compose view.  The reason why there are two different systems is because your camera has a mirror inside.  When you look through the viewfinder, you are actually looking through the lens.  To do this, they need to put a mirror between the lens and the sensor, so you can browse through the same lens that camera is to use.  But which reflect the light to reach the sensor blocks.  So they actually have a system of development that does not use the sensor and can focus when the mirror is in the way that (the mirror of the part of the light bounces actually in focus sensors).  When the mirror went away (for the live-view shooting) it obviously can flip any light in this special focus sensor.  To remedy this, it uses image sensor of the camera work on the update.

    The two systems are independent, and the only thing in common is that they both send instructions to the lens to move the focus in or out.    If a system of development does not work... try another (update looking in the viewfinder... and test development using the "live view" mode (only not looking in the viewfinder.))

    (3) but that leads us to the third possible problem: the lens.  The engines of development (for any Canon camera) are in the objective... not in the camera.  The camera simply gives instructions to the lens it say how adjust the setting to the point and to what extent.  Is there a problem with the lens, then it can not focus... even if there is absolutely nothing wrong with the camera itself.

    If you have a different purpose, you can swap lenses and see if the camera still has a focus problem.  If it has only a focus with a particular lens problem... it's the objective that needs service and not the camera.

  • Is there anyway to take a picture on the camera to my computer remotely?

    I can take pictures near my computer built in camera, but I was wondering how to take a picture of me away since I have to use the mouse to click to take. Is there any kind of timer or a way to do this?

    Hello Jan Burns,

    Webcams are have pretty basic features. After all, they are only there for you to use as a video link when you talk to a friend/family etc. You might find another pair of useful hands providing you can either keep those pair of hands spreading the Court or modify them later. Try positioning the laptop (I guess that's a laptop as you say 'built in camera' and ask someone else to press the buttons for you after you have positioned your required remote.

    My PC is a desktop computer and my favorite way to take pictures using a keyboard and a wireless mouse. The exercise that I am placed no more than 6 to 8 feet of the camera, I can use the keyboard or the mouse to press the key functions needed to take the picture. Everything that I don't like on the photo I change later.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • Cannot take a picture of screen shot now?

    Since the iOS 10 update, it seems that I can take is no longer an image of what is on my screen. I'm used to be able to do it by pressing the power button and then pressing the home button to make the catch. This is particularly useful in holding a long distance tour, enlarge the shot, and then take a picture of this zoomed image.

    Any other way to capture even a screenshot?

    Thank you

    Rob

    kissfan1978 wrote:

    Since the iOS 10 update, it seems that I can take is no longer an image of what is on my screen. I'm used to be able to do it by pressing the power button and then pressing the home button to make the catch. This is particularly useful in holding a long distance tour, enlarge the shot, and then take a picture of this zoomed image.

    Any other way to capture even a screenshot?

    Thank you

    Rob

    NO question here, can still do with my mini2 5s, 6 s, and ipad

  • I take a picture and it disappears instantly film!

    I don't know what happened, but after yesterday, I can't do anything with my camera and my photos app. In a first time, I realized that I can't save all photos Facebook messenger and etc, and then I realized all my previous screenshots (2 days ago) have disappeared from my camera. So I decided to take a picture, I took an and I see on this little place on the left side of my photo app that this photo is in my camera, but when I go to my photos app, it appears. HE DISAPPEARS.

    Then I tried, after taking the picture, goes directly from my camera app app photos through this little place on the left. "Then the photo presented, but I couldn't delete, share, or do something with it and when I closed the application and the same pictures opened" app on my dashboard that picture disappeared.

    Additional information:

    1. I can't import my photos, I took a few days ago to my macbook air

    2. I don't have enough storage icould to store my photos taken earlier; and my recently deleted folder disappeared.

    Please help, I'm going to a party next week and I want to take pictures.

    Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

    If a force restart does not help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

    https://support.Apple.com/en-us/HT201252

    If the steps above do not help, you may need to test in an Apple store.

  • Can I take a picture that is not in my photos?

    I use a lot my iPhone to work.  There are as many times I want to take a picture for the work I want not mixed in my normal photos.  Is it possible to do

    You can move photos of work to the album "hidden pictures".  Then they will not show in the Moments and Collections. http://help.Apple.com/iPhone/9/#/iphf14943e

    Hide the photos or videos you want to keep but not show. When displaying thumbnails, press Select, then select the photos or videos you want to hide. Press the button on the share, and then click Hide. The photos or videos are moved to the Hidden album.

    You can create a new album 'Work' for your photo work. Hidden photos will show in albums, but not in the moments and collections.

  • My IPAD 4 takes great pictures but will not save the photo

    MY IPAD 4 takes great pictures but will not save the photo

    Don't know what your question, but the changes are saved to a file with the extension. AAE. If you are importing photos to a Mac changes will come with photos.

    Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  • Cannot take a picture with the Camileo X 100?

    After connecting my Camileo X 100 with the RCA connector to my LCD from LG TV, browsing through my images and possibly disconnect the camera, something strange happened.

    After I turned on the camera and tried to take a picture, nothing happened. I can't take a picture, turn a video, zoom in and out, or set the image and video preferences and settings. I can only navigate through the pictures and videos I took before. It seems that my camera is stuck in the same mode, when it was connected to my TV.

    I removed the battery several times and nothing. The only button that responds is the play button, and trying to take a picture, only the square (white, green, or red) is shown. Please, help :(

    Thanks for your comments!

  • IPhone 6 stop when you take a picture

    My Iphone 6 (a little more than one year - iOS 9.2.1) is going down, when I take a picture and I have a little less than 50% of the battery left. So I plugged into electricity to start again.

    The only things that keep the problem is to switch the battery saving mode.

    Anyone with the same problem?

    Best regards, Laura

    My iPhone will also turn off when you take a picture.

    Happens to me on a 6 s iPhone too.

    For me, it happens when I go out and have not used the phone for a while and pick up the phone to take a picture. It happened on a 5s iPhone in the past.

    There is also usually a cold day, no sub zero, but cold.

    It's especially annoying as when out and about, I usually don't have a power supply to plug the phone in.

    If I leave the phone for half an hour, the phone can be turned on again without going through a connecting the power supply and it shows a level of reasonable, green power, in the status bar, but it stops again, trying to take a photo.

    See you soon

    Paul

    iPhone iOS 9.2.1 6s

  • My iphone camera 6 doesn't have an option to take direct pictures IE 3 small circles are missing. How can I reset the camera?

    My iphone camera 6 + doesn't have an option to take direct pictures IE 3 small circles are missing. How can I reset the camera?

    Restart your iPhone, iPad or iPod touch - Apple Support

  • I have phone 6s more camera is not working and no sound and when I want to take a picture, it's dark

    I have phone 6s more camera is not working and no sound. When I want to take a picture, it's dark. I have change the new one to I care service in Thailand and I got the new one but the problem remains the same. Pls help me how should I do?

    Read: get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  • Why my iPhone 6 takes blurry pictures?

    I have an I Phone 6 and it seems that when I try and take a picture, zoom, it's blurred. It also happens when I try to take a picture of a landscape.

    Thank you

    Tracy X

    Hello Tracy,.

    Thank you for using communities of Apple Support.

    I see that you have problems with the quality of the image of your iPhone 6. Here is an article that can help you solve the problems with the image quality with the camera on your iPhone:

    Get help with the camera on your iPhone, iPad or iPod touch

    Kind regards.

  • My iphjone 6 makes more a clicking sound when I take a picture?

    My iphone is no longer clicks when I take a picture, ALSO the sound signal has stopped sound when I receive TEXT messages, I don't know if they are related, and the phone does not ring on incoming calls, it vibrates just and responsible?

    Check the side of the phone. It seems that you have enabled the "secret" key.

    Check out this link.  http://help.Apple.com/iPhone/9/#/iph3bd01398

  • I need to take a picture of a code bar on a package insert in a letter. How?

    I need to take a picture of a code bar on a package insert in a letter.  How?

    Start the camera application, take your picture.  In the program where you type your letter, choose Insert > image and choose the picture that you took.

  • How to use the webcam integrated to take a picture?

    Original title: integrated webcam help!

    I'm trying to figure out how to start just the webcam, I can take a picture. The only way I can get to get here is when I make a call to Skype. I don't want to make a call, I want to just take a picture with my webcam! Help, please!

    Hi miap7,
     
    As you have a built-in webcam, you can refer to the manual for the computer to know the same.
     
    You can also let us know the make and model of your computer to help us find the information for you.

Maybe you are looking for

  • Pavilion g6: disable System

    Hello I have a HP Pavilion g6 with win including 8, but when come with password administration after the failure of attempts he of * beep * up with disabled system can 54905903 someone help please. Concerning Javier

  • Number of attempts Spin SMART MK2035GSS (200 GB, 4200 RPM) on the Satellite A200

    Hi all, I have a warning of HDDlife program on my hard drive * TOSHIBA MK2035GSS * (200 GB, 4200 RPM):concerning the health of hd.SMART * Spin retry count *: 114 (value), 30 (threshold), 100 (worst), 0 (RAW). Status: 49% I don't know the values for t

  • Cannot decompress files/folders on Vista

    Every time I try to open a file compressed on my computer, Internet Explorer keeps opening & closing, repeatedly, and it forces me to restart my computer. It is my understanding that on Vista when you try and open a zip file by double-clicking it, he

  • In Windows live movie maker, I can no longer play or record on a Panasonic HDC-SD60 camcorder m2ts

    I have a stringing Panasonic HDC-SD60 Cam and record m2ts movie.  Windows Live Movie Maker used like that very well, but has now ceased to be able to read them.  The preview pane displays all high 10th of the thumbnail, but the file will not play. I

  • Printer HP Photosmart will not start

    I am not necessarily in a hurry for an answer. I use a HP Photosmart 7260, S/N CN38Q2B0ZQ, Q3005A printer, model # SDGOA - 0372, with a Mac OS 10.5.8.  Printer blinking red and will not start.  There is no driver for the printer.  I had for a long ti