HP Mini 210 Windows 7 32 bit 4313 Broadcom wireless problem, perhaps.

Similar Questions

• HP Mini 210 - windows password lost

  HP Mini 210, lost the Windows password.

  [Redacted] Serial No.

  Product # XG722UA #ABA

  Model: HP Mini 210-2070CL

  Any help would be appreciated, thanks!

  Try here.

  http://www.password-reset.com/?gclid=CL67jvfrjb4CFRQaOgodxDYA2A

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Go to Windows 7 32 - bit on cursor wireless 3000 Y410 problem

  Hello

  I recently installed Windows 7 32 bit on my Lenovo Y410 and drivers work for the most part out of the box. However, I have a problem with the switch wireless slider. The switch does not respond when cold start (wireless stays off), but works very well to wake up from sleep mode. I tried Vista drivers of a Lenovo installation for the wireless card Intel, as well as the Bluetooth driver installation of BroadCom.

  Anything else I can try to install or change in the registry?

  Very appreciated

  tuks

  
  

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• 650 HP laptop with Windows 7 32 bit Home premium RAM problem

  Hello.

  I recently purchase a new HP650 notebook that came with Windows 8.  I have this wiped and reinstalled windows 7 32 bit edition Home premium and downloaded all the drivers/software relevant on the HP site.

  However, the machine is supplied with 4 GB of RAM, including the BIOS see' good sas.  Windows 7 recognizes that 4 GB but it says that only 969 MB is usable.

  There is nothing of configurable in BIOS for the use of video memory or information about the reserved addresses.

  I am aware that 32 bits will use about 3.5 GB but wow can get this machine to use all 3.5 GB?

  Any advice would be apreciated.

  Thank you very much

  James

  Hello

  I suggest that you uninstall the Windows 7 Home Premium (32 bit) and switch on Windows 7 Home Premium (64 bit) version to treat memory problems.

  The Microsoft Windows 7 activation key on the certificate of authenticity you have for the 32-bit version will work with the 64-bit operating system. The caveats are that you can have only a single installation active with the license key at a time and you must have an installed processor that is capable of 64-bit OS.  You will find that the 64-bit version is far superior to the 32-bit version for stability. Of course, there is the increased ability to recognize more memory installed up to limits of the motherboard.

  You can download the 64-bit here. The drivers are available on the support portal web for your mobile in the section download.

  Erico-

• Windows 7 64 bit laptop on wireless network can not find .inf wired for Canon Pixma iP4000 printer driver for windows 7 32 bit PC

  First of all, I read the thread on the laptop win 7 and win XP PC with attached IP4000.  I have just isn't helping me with that.  I am computer literate network, but I have to be dumbing down, so be specific in a response, you can give it.  Please, do not assume I know something just because it can be public knowledge.  Thank you for understanding my situation!

  New Win 7 64 bit laptop connected wireless to a network home through a Netgear WNDR3700 router.  Wired to the router, it is a PC with a USB attached printer Canon IP4000.  This printer has worked without problem with this PC for years.  Add the laptop.  Try to access the printer on the network (it is set to be shared on the PC) translates into an inability to find the driver for the printer.  On the Canon download site, I downloaded and installed on both machines the driver add-on 'aomwin110ea23us.exe '.  This does nothing to solve the problem.  Then, follow the suggestions in the thread referenced above, I downloaded installed 7 - zip and unzipped the file add-on from Canon.  Guess what? -There is no, zero, nada, stupid ".inf" file in there!  I understand that I need share on the PC to both x 32 and x 64, but without a valid .inf file to point to, I'm sunk.  And the same is true when you try to add the printer to the laptop - not to point to .inf file.  Is the only thing that I have not tried to install the printer directly to the laptop via the USB port, and it's because this is not a configuration that is usable for me.  The printer must be attached to the PC.  Is there anyone out there who can help me solve this dilemma?  Please do not give me an answer telling me to download the driver - usually you tell me precisely what driver and then guide me through the process.  Rest assured that I appreciate sincerely any help you can give me.  Thanks in advance!

  Most likely the name of the driver you are using on XP to share the printer a is not not the name of the 64-bit driver.  The pilots names must match in order to add the printer as a connection to the 64-bit computer using the normal RPC protocol.  You can configure the printer on 64-bit Windows 7 as a local printer that will basically copy the data from the printer to the format to share on the XP machine using SMB protocols.

  This is a Ko for incompatible drivers when connecting XP to NT4.  Replace your server / client configuration, but it's the same process.  Make sure that you are connected to the internet and select the Canon 64 bit driver available on Windows Update (use the Windows Update button in add printer) http://support.microsoft.com/kb/282842

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• HP Mini 5103 Windows 7 32 - Bit, recovery CD

  I have a HP mini 5103 and I wanted to save the recovery to USB and unfortunatlly, files recovery in the partiiton at startup are corrupt and the Manager of recovery in windows 7 is not there. When I press f10 or either f11 at startup it says ramdisk. Then I followed the instructions here http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00810334 and hp doesn't sell recovery media for windows 7 I. So I was wondering is there any place I can get it, or if someone has a hp 5103 I can pay and you can send me a usb key with the news of recovery on it. Currently my windows works fine, but I'm just thinking ahead.

  "hp doesn't sell recovery media for windows 7, I have."

  Why

  Have you called HP on the phone to be sure that it is not available?

• HP Mini 210 Windows 7 Starter booted fine screens but then blue due to iastor.sys

  Screens blue pc within 3 minutes so can't do much.

  I can boot mode safe mode with or without however networking.

  I wish I could do a repair of the system on the BONE but have no startup discs.

  Please advise.

  I wonder if BH has actually read what was going on. You can access the Manager of program... duh

• error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

  error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Inspiron N5010 windows 7 64 bit driver driver Wireless does not

  Inspiron 15 Intel (N5010)

  After buying a new hard drive for my laptop and reload windows 7 home premium 64-bit, I started to download the proper drivers, most of them seems to work, except for my wireless adapter which does not pick up.

  I tried the site of dell support for drivers on this list don't seem to work either, I finished downloading the drivers as I can, as I do not know the brand of my card and my knowledge of the material is very limited.

  Please please help with the right drivers for my problem thank you very much.

  pharoah165b,

  When you reinstalled the operating system, have you installed the desktop system software / laptop (as appropriate) and drivers from the chipset first? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Start with the computer system software and the chipset drivers and follow the list.

  Rick

• Blue screen of Windows 7 64-bit. USB the problem or a symptom?

  For two months random BSOD crashes my Windows 7 Ultimate 64 bit computer.  Looking at the accidents with the BSOD Viewer, many of the accidents are associated with ntoskrnl.exe with many page faults, problems with memory, etc.   Throughout this process, I found that my keyboard and wireless mouse stop working.  To get them to work again, I shoot the transmitter to the pc and plug it in again.  Often, I need to be relatively close to the transmitter to get to work.  In addition, my USB key with a backup drive would sometimes lock up.  The Device Manager has no icon saying something is bad and the USB drivers say up-to-date.

  System
  MB - Gigabyte - GA-P55M-UD2
  CPU - i5 750
  memory - 4 GB
  drive - seagate 1. 0 t 5400 RPM (SATA2)
  graphics - Nvidia 9500

  My not so far.
  SFC/scannow - shows no problem
  Chkdsk - shows no problem
  Windows 7 - it is updated
  winutlitiies - did not help
  Utility Windows 7 shows memory good
  Auditor of Seagate drive - shows the disc is fine
  video drivers are up-to-date
  no viruses or Trojans are present
  BIOS seems to be up-to-date
  Msconfig - with a minimum of options, still crashes (though much less)

  I'm at the point of reformatting the drive, but before doing so I opted to use a live CD linux with all my disks mounted version to see if the PC will crash.   It works perfectly.  I can broadcast 5 youtube videos, run 9 movies/videos, play many pieces of music - at the same time.  This type of load under windows 7 will result in an accident.  Regarding the USB part, mouse and the USB keyboard can be used for distance or have never stopped working. The successful use of linux shows that I have no hardware failure causing me problems.

  What are accidents caused by USB drivers or is this a symptom?
  What else can I try before a waste reformatting or reloading of the time?

  Thank you

  The minidump file showed a POOL_CORRUPTION_IN_FILE_AREA (to) stop without specified third-party driver error as causing the crash.

  Because of the kind of errors, I'd say remove a RAM module and see if there is an improvement.

  If not, try the other module.

• OfficeJet 6500 and USB on Windows 7 64 bit does not (wireless works fine)

  Hello world.

  New printer. WiFi Of my different laptops works very well. However my main system is not in wireless. Try to install via a USB port. When I plug the printer Windows 7 sees it but I can't get the drivers to install correctly to where I can use fax/scan options. I can print, but I can't do anything else. If I go to the device, the printer appears with the correct name, but says that the driver is not installed. If I try to install manually (using the disk) it barfs and says that the driver is not digitally signed.

  When I run the installation of the software (I downloaded the new installation driver package Basic and full) and I get to the point he wants me to plug the printer, it starts the installation but then Windows barfs and said "no driver found" and then the HP installation fails. It's almost as if Windows 7 is blocking the device when it cannot find a driver. I tried to disable 'automatically install the drivers', but then the installation of HP does not see the printer when it is plugged.

  Basically I'm going nuts and is getting ready to send this printer to Costco, get a Canon. I know the drivers of Canon works because my neighbor has the same configuration as me and his printer, installed fine. I prefer the HP (well, I did) but tired of beating my head against the wall. Anyone have any ideas?

  Thank you

  . / height

  I figured this out. The USB driver would never install. I beat my head against the wall for days and never thought about it. However, I didn't know that I could install the drivers on my main PC with no wireless connectivity wireless. Has a cable LAN connectivity. Apparently my wireless router is smart enough (like most) to send the print queue through my local network to the wireless printer.

  So I just installed the software wireless on my 64 bit WIndows 7 system and I print just as if I was of my laptops wireless.

  I wanted to just update everyone because it isn't really all that clear that you do know. print even if you are wired to the wireless printer.

  See you soon,.

  Dave

• Irregular connectivity - ACER 7551. Windows 7; 64 bit. Broadcom 802.11n network adapter

  and Microsoft virtual WiFi miniport adapt.

  Netgear wireless WEP encryption.

  I have a DELL Inspiron with NO QUESTIONS through Win 7 the same router.

  ACER aspire unpredictable will escape and does not connect at all.

  The troubleshooter for WINDOWS currently deducted "your modem broadband has connectivity problems. Reset your broadband.

  On other occasions, troubleshooting has solved the problem.  This happens probably once a day.

  Seems illogical that the modem would only allow a computer through the router?

  Of course, I rebooted.

  Any suggestions?

  Thanks for your swift suggestion.  During this time, I did a restore to a point several weeks ago.  Then I got an error message that NORTON was corrupt. So I did an UNINSTALL of NORTON (need to go to their Web site - could not just use Uninstall WIN from the control panel settings). Then a reinstall.

  My connection is OK today. I'll see how long I can go without problem before returning to your suggestion on the pilot.

• [Windows 7, 64-bit] Xbox controller wireless connects for about 1 minute, then disconnects

  The controller used to work perfectly fine, and then I put on a shell and now it's all messed up. I re-installed all software driver and I spent my mouse and keyboard to the USB 3.0 (if this even helps you what either). Is the shell causing weird interference or is there a solvable problem?

  Also, when it works for this short period of time, it works 100% fine.

  Brian,

  Please contact the Microsoft Community.

  I you have to check out these items-

  http://support.Xbox.com/en-us/Xbox-360/accessories/controllers-remotes

  http://support.Xbox.com/en-us/Xbox-360/accessories/wireless-controller-disconnects-frequently-or-cannot-connect

  If you continue to deal with the issue, so I'd like you to contact support - Xbox

  http://support.Xbox.com/en-us/?XR=shellnav

  Know let us know how it rates for you.

• Pavilion DV6-3240Br: 4313 Broadcom driver for windows 10

  Hello

  I have an old Pavilion DV6 3240Br and just upgraded to windows 10. Unfortunately, I can't find a driver for my system. HP said that it will not develop specific drivers for my device. It uses a broadcom 4313gn 802.11b/g/n wireless card. There is a driver (maybe another portable model) that works with this broadcom card in 10 x 64 windows?

  Best regards

  Paulo

  Hello:

  The only suggestion I can offer is to try the latest Broadcom driver published for this model of wlan for W8 map...

  6.30.223.227 Rev.A (November 12, 2014)

  Microsoft Windows 8 (32-bit)

  Microsoft Windows 8 (64-bit)

  Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  FTP://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69737.exe

  Try to install the driver manually if auto installation does not work.