6470b Audio IDT - SCCM 2007 Silent Install

Similar Questions

• HP 2540p IDT High Definition Audio Codec - SCCM 2007 Silent Install

  Guy

  I have SP50589 not packaged, created a package driver request and uses the install command to install it silently...

  Setup.exe/s/v/qn

  When I run the task sequence, a failure is returned due to packaging do not install it. When I run locally the package installs fine.

  Does anyone have the answer, our guys from the packaging is cultures under snow and I want to start this thing to touch.

  Concerning
  Scott.

  Hi Scott

  Tested the SCCM packed for the HP High Def Audio switches below

  S /f2"C:\DIrectory\SMS\Logs\Install.txt setup.exe".

• Driver Audio IDT (?) Question

  I had problems with my audio on my laptop. I have a HP Envy Sleekbook m6 model m6-k010dx running on Windows Update 8.1. A few months ago, I had problems getting my audio to work. I didn't know what I was doing, so I uninstalled by mistake and/or deleted Beats Audio, as well as the IDT, which is what I think caused my IDT drivers stop working correctly in the first place.
  I restarted my pc after trying to fix my audio, and he ended up telling me that I needed to update my computer. The update apparently failed, but miraculously my computer restarted a few days later. When I reviewed my files as well as all my drivers, nothing seemed wrong. However, I don't have the Beats Audio program longer, even if my IDT drivers seemed to work very well. Whenever I have try and run the beats, he told me that the startup.exe file is missing, which I suppose means it has, unfortunately, been removed.
  I'm not worried about it because I guess I felt lucky to get my audio back, so I have not dug too deep so far. Yet once, I'm having a problem getting my audio to work. I went into Device Manager, and my convenience store told me that it was another problem of driver.
  Yes, see no other way to go about this after trying but failing to have my computer to reinstall the driver, I uninstalled it manually; I thought that Windows would detect the missing driver and be able to solve this problem, so I rebooted and went into my device manager. Now, it gives me a different error, I have attached a screenshot. I have no idea how all of these problems, and all the help you could give me would be greatly appreciated.
  Thank you!
  

  Hi mstrcorbot3000 and welcome to the Forums of HP!

  I understand that you have a problem with your IDT audio driver for your HP ENVY m6-k010dx Sleekbook. I'll try my best to help you solve this problem. I recommend that you uninstall the driver that is in the device for IDT audio driver manager and then download driver Audio IDT high definition (HD) and install it before you restart your computer.

  I hope that this information help, please let me know how it goes.

  Thank you and have a great day!

• Beats Audio / IDT pilot for Pavilion DM1 4027sa / qj516ea #abu

  1. product name and number: Pavilion DM1 4027sa / qj516ea #abu

  2 operating system: Windows 7 64-bit (own generation, no HP Recovery)

  error 3 message: N/A

  4 all changes made to your system until the problem occurred: cleaning of Windows 7 DVD (commercial version)

  I recently did a clean install of Windows 7 64 bit on my laptop from DVD true retail because the resumption of HP I is 32-bit and so cannot use all the memory in the machine.

  I managed to find the most important software and drivers but miss me the beat / Audio driver. It does not appear on the page of download driver laptop (with another software, but that's probably another story).

  I found and installed HP Support Assistant, and who concluded that the Beats Audio was missing and that would have been installed (unless she didn't and he didn't tell me). However, he seems to still be there - there is no Beats Audio icon in the system tray and it is not something that you can uninstall in Control Panel. I also installed HP on-screen Display as it seems to be necessary, but it does not seem to have brought Beats Audio to life.

  Lack of pilots of Beats Audio seems to be a common theme on this forum, but unfortunately none of the opinions of existing positions worked for me. I suspect it is maybe because none of them focused specifically on my laptop model.

  Can someone point me to the Beats Audio / IDT download for my PC model or suggestions for other ways to get installed it. Note that I have no HP Recovery Manager installed because I can't find that download is...

  @JamesDM1

  Hi again,

  You can consult this topic, looks like I found the correct driver for your model in another thread.

  @Dragon-as

  Hello

  Sorry Dragon. Please do not be angry. I love you too.

• IDT - Audio - IDT High Definition Audio CODEC-updated, problems with the audio

  I recently installed successfully IDT - Audio - IDT High Definition Audio CODEC and after that none of my audio worked. Everything indicates that the audio is working as usual, but no sound. Also, when I did a test "sound" in the control panel > sound, it is said "the test could not be played. (Translated from Finnish Windows Vista, but anyway). I went to IDT Audio settings (from the bottom right icon) and noticed that my headphones and speakers had been cut so I removed the 'secret' of these two, but nothing happened. I tried to restart the computer several times and recheck the IDT Audio settings but nothing found which could cause the problem.

  Hey Andyy27,

  My HP Support Assistant tried to make me update this driver I have the computer in mid-August.  Same thing; whenever I have install the driver, there is no sound either - I have not known what you mentioned above on the sound slowly disappears.  Thahaseena, good to have you hear.  I am running Windows 7 family on a HP Pavilion dv6 Notebook PC.  After installation, there is no request to restart or stop to install updates; my sound card lists an error and I have to roll back the driver to make it work again.

  My driver date is January 13, 2010, version 6.10.6265.0.  It's one that I continue to back and it works.  I will install the update now and tell you what I get for audio driver is not working.

  The properties of my IDT HD Audio CODEC says:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  You must restart your computer before the changes made to this device will come into force.

  New driver that disables my sound: June 17, 2010, version 6.10.6289.0.  Well now, it asks me to restart, but I'm not having good hope... will write if this time it solves the problem (4th time charm?).

• Driver problem Audio IDT high definition (HD) after windows 8.1 update 1.

  Hello. I have HP Probook s 4730. After you install the update to Windows 8.1 1 the audio driver has stopped working properly. When I want to play some music or even video system sounds, noise appears after 1-2 minutes. At that time, disk use is 100% cause of isolation of graph for the device windows audio. I installed this driver Audio IDT high definition (HD) on the support site for the driver of HP, but it does not work. As I see it in the device manager driver release date is 24.10.2012. I think it's too old for Windows 8.1. Can you help me? Y at - it another more recent version of this audio driver? Also I send only two pictures where are drive HARD use and driver release date.

  I found a solution to our problem! I installed this driver Windows 7 in compatibility mode. You must remove this one for Windows 8.1 in programs and features, then download this version I have already mentioned, sole extract in a place where you want and install with compatibility mode. To do this, you must enter the configuration properties, then compatibility mode and select Windows 7, also check "Run this program as Administrator". This driver works fine for me. Hope you enjoy it also.

• SCCM 2007 Office package

  For the life of me I can not office 2007 to install on via SCCM.  I'm not the new version 1511 and I can load the files source on a computer, run the command setup.exe /adminfile 2007custom.msp and it works fine.

  Tried to reproduce this in SCCM and it will not deploy.  Any time, I try to plan its System Center says the package is overdue and needs to be retired.  As much as I'd love to retire from the old software, I have legacy clients who need so I need to be able to deploy it.

  Someone has an idea?

  Your question is beyond the scope of these forums focused on consumers.  You should ask your question on the Microsoft Technet forum.

• SITE Installation on SCCM 2007 v2.0

  Hi Eveyone,

  I try to install the Pack integration of customer Dell (CPID v2.0) for SCCM 2007. In the installation of Dell Guide and in the "Prerequisites to install SITE" section, it states that "you must install all the components of the SITE excluding the value of the guarantee on the same server where ConfigMgr is installed.  It doesn't tell you where to install the utility of warranty.

  For those of you who have installed and configured the Dell Utility guarantee to work, on what server or workstation do you have to install it and make it work? Did you install on a Server Site with no installed ConfigMgr and do work or installed on a single Windows Server 2003 or 2008/R2 in the SCCM environment?

  In the supplied with CPID v2.0 User Guide, it tells you just how to start to set up without telling you which server to set it up on.

  Any information on how to make this guarantee utility work well will be apprecaited.

  Thank you

  TeeDarling77

  You can install the utility warranty on your site server (many clients do this).  Other components of the 2.0 SITE were required to be on the site server, but the usefulness of the guarantee do not have this requirement.

• Error: "this meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  Hello

  I have a problem with Live meeting 2007. I'm organizing a live meeting with people from different countries. Some of them cannot hear anything and can not use the microphone. They get this kind of error:

  "This meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  I tried to look for a solution, but I did not understand what Live Meeting I need to download.

  Can you help me?

  Thank you.

  Original title: Live Meeting 2007

  Hi Alex,

  Thanks for posting your query in Microsoft Community.

  I understand your concern. In this case, I suggest you refer to the Microsoft TechNet article following which sets out the series of frequently asked questions related to Live Meeting 2007 and check if the solutions are useful.

  FAQ: Live Meeting related topics media

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Reference Dell Customer Integration pack for sccm 2007 sp2

  Hello

  I'm having trouble installing the integration of customer Dell for sccm 2007 sp2 Installer pack to install Custom ACtion.help and then gives the error 2147467261. Does anyone have any ideas on how to solve this problem.  Is the server a sccm 2007 ver 4 is installed on this windows 2008 R2 server

  Any help would be appreciated

  Has raced in mode compalty

• Adobe Presenter 8 silent install

  Hello!

  Running Windows 7 x 64 and need to find a way to do for installation in silent mode via SCCM for mass deployment.

  Unable to find any documentation on this subject...

  / Henrik

  Hinken, you can silently install presenter 8 like many other adobe products. Simply create an msi package for presenter using JOHN 3.1 8 and then push it through SCCM and install in silent mode.

  You can get the last 3.1 AAMEE since the link with CS6 Enterprise Deployment Guide(works with Presenter 8 as well) below.

  http://www.Adobe.com/devnet/creativesuite/enterprisedeployment.html

  [Transferred the deployment Forum discussion]

• How can I do a silent install of Firefox 23 because the switch - ms does not work?

  I was able to do a silent install of all the previous versions of Firefox by using the switch - ms. But when I use it on the new version, the user interface comes up and he has never done this before. I tried different silent switches but non of them work.

  Not the most experienced at this, but you use the stub Installer, perhaps you can try the classic installer and try again?

  Hope this helps.

  • https://www.Mozilla.org/en-us/Firefox/all/ < = full installer

• I need to silently install the latest Mozilla firefox under Win7, I don't see any available .msi and the orders/s or-on the setup.exe installation program does not work. Anyone know what I can do?

  I need the silent install Firefox for image deployment.

  The command line for the installation switch is now - ms

  If you prefer an .msi installer, a company called FrontMotion create the .msi for Firefox installers - http://www.frontmotion.com/Firefox/download_firefox.htm

• X 250 reports for SCCM 2007 boot disk WinPE "cannot find a valid network adapter."

  I built a 250 X with Win7sp1 Enterprise, used Lenovo System Update to update all drivers, driver and creates a new package of drivers of SCCM 2007.

  I added the driver v 12.12.80.1950 Intel I217-LM to the Boot Image, distributed to distruting SCCM points and created a new USB stick to boot using the SCCM Assistant.

  When I boot on the USB drive I get the message "cannot find a network adapter valid."

  I can use the ignition key on a 240 X without any problems.

  I can see the pilot I217-LM in the boot image. When I connect locally on the laptop, I can connect to a share on another PC, so the driver and connecting to the LAN function. It is only during boot on the key of USB startup problem occurs.

  Any help much appreciated.

  Problem solved.

  The boot image, I added the driver to was "not to inject a ConfigMgr driver", I created a new boot image added three drivers NET from the driver package provided by Lenovo SCCM for X 250 and the laptop can now connect to the SCCM server.

• Uninstall SCCM 2007 ADSI EDIT

  Hello team,
  WE have SCCM 2007 and it was not used and the server has been removed form the network. I need to downgrade SCCM 2007 via ADSIEDIT... We can you suggestions please?
  Adding to it we intend to deploy SCCM 2012 R2, ensure that its completely removed from the AD? Any suggestions would be really great

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum